Recording sessions stopped automatically

Last weekend I recorded several live performances of a party cover band (30 tracks, iLIVE T112 - MADI Card - RME MADIface, 24bit/48kHz). The system worked fine but all logic recording sessions stopped automatically at 01:01:40 min, so i lost always 2-3 songs in every set.
What the hack? Is there a file size restriction or something like that? What went wrong...any idea anybody? Thanx in advance...
MBP Mid 2012 Retina, 2,6 Ghz 16GB RAM, 512GB SSD,  LogicProX 10.0.6 , OS 10.8.5

Yes, there are file size restrictions. But your file sizes would be just above 500 MB for a mono file (3700 x 3 (24 bits=3 bytes) x 48k), and 1 GB for a stereo file, both are well under the maximum for AIFF, WAV and CAF formats. Could it be that your disk got full?
AIFF: The AIFF file format cannot handle audio file recordings larger than 2 GB:
For 16-bit, 44.1 kHz stereo files, this equals a recording time of about 3 hours and 15 minutes.
For 24-bit, 96 kHz, 5.1 surround files, this equals a recording time of about 20 minutes.
WAVE (BWF): The WAVE file format cannot handle audio file recordings larger than 4 GB:
For 16-bit, 44.1 kHz stereo files, this equals a recording time of about 6 hours and 30 minutes.
For 24-bit, 96 kHz, 5.1 surround files, this equals a recording time of about 40 minutes.
CAF: If the size of your recording exceeds the above limits, choose the CAF (Apple Core Audio Format) file format, which can handle the following recording times:
About 13 hours and 30 minutes at 44.1 kHz
About 6 hours at 96 kHz
About 3 hours at 192 kHz
The bit depth and channel format—mono, stereo, or surround—do not affect the maximum recording size of CAF files.

Similar Messages

  • T4i Rebel error message "movie recording has stopped automatically"

    I was recording my client when suddenly I got a this error message "movie recording has stopped automatically" and I could not record video anymore. I am recording on a class 10 sandisk Ultra card. 720/60, EFS18-135mm lens. Never had any problems in the past. First I get a small veterical meter on the frame and then after 5 secs the recording stops with this error message. Please tell me it is opeartor error...I have had this camera for 2 years now and never had a problem. I tried multiple cards.
    thanks for the help,
    DM

    Either you or the person you spoke to at Canon was confused.
    What the camera requires for video purposes is a card which is "at least" Class 6 or faster.  The class designation is an indicator of the cards data transfer speed.  Class 6 actually means the card is capable of transfering data (either reading or writing) at "at least" 6 megabytes per second.  A Class 10 card can transfer data at "at least" 10 megabytes per second.
    The T4i is also compatible with "UHS-1" cards... which are significantly faster than eithe Class 6 or 10.
    The reason for requiring "at least" Class 6 has to do with how fast the camera is attempting to capture and save frames of video to the card.  The camera actually has an internal memory buffer which is very fast.  When you start recording, the data is being saved to that buffer... and simultaneously the camera also starts taking the data from the buffer and saving it to the memory card (which is slower).  If the camera is recording video only slightly faster than the card can record, then it will actually take a few minutes before the buffer is completely filled.  But at that point the camera has no choice but to stop recording because it has absolutely no place to save data ... the internal buffer is full and it can't empty the buffer because the memory card can't save data as fast as new frames of video are coming in.
    Faster is always better.
    Memory cards do actually wear out and develop errors over time.  This is normal.  A good card will re-map the bad blocks so they aren't used anymore... and this is why you should do a low-level format IN CAMERA (not using the computer).  Good cards also have a "memory leveling" technology to try to use all the blocks roughly an equal number amount.   This extends the userful life of the card.
    When replacing the card, do not skimp on quality!  I cannot emphasize that point enough.  Most times when someone brings up this issue... it's the card that is having problems and not the camera.   
    It's easy to produce forgery cards which look like a good brand but are not.  Buy GOOD cards from REPUTABLE dealers.  Do not shop for the cheapest website on the Internet with a questionable reputation in order to save a couple of bucks.
    Lexar brand and SanDisk brand are good. 
    When buying memory cards, I only buy cards from Lexar and SanDisk.  I also buy their highest end cards (by speed performance... not necessarily their biggest capactiy cards).  I buy the cards from dealers with a solid reputation.  This avoids the unpleasant error messages which always seem to happen at the worst possible time.
    Tim Campbell
    5D II, 5D III, 60Da

  • T3i- Movie recording has stopped automatically

    Hi, guys. I've never had this problem with my T3i/SD card until tonight, and I'm not sure what the problem is because I have the Sandisk Extreme Pro, 32 GB SD card that reads 95 MB/s. What could be the problem? The video stops recording after about 5-10 seconds if I'm playing my piano and it has to record me. My SD card has 17GB of space, so that can't be it, can it? Sadly enough, I don't have another SD card to test this with.
    I have also formatted the card again and it works better, but every other video or so, it stops recording automatically. For some reason it's only doing it when I'm recording myself doing something complex, such as playing drums or the piano.
    Any thoughts?

    willfoxylove wrote:
    Hi, guys. I've never had this problem with my T3i/SD card until tonight, and I'm not sure what the problem is because I have the Sandisk Extreme Pro, 32 GB SD card that reads 95 MB/s. What could be the problem? The video stops recording after about 5-10 seconds if I'm playing my piano and it has to record me. My SD card has 17GB of space, so that can't be it, can it? Sadly enough, I don't have another SD card to test this with.
    I have also formatted the card again and it works better, but every other video or so, it stops recording automatically. For some reason it's only doing it when I'm recording myself doing something complex, such as playing drums or the piano.
    Any thoughts?
    If the camera stops recording after 5-10 seconds intermittently ("...every other video or so, .."), it is trying to tell you something.
    The camera has stopped the recording because it has been instructed to do so. You are confident that the shut-down isn't due to running out of space on the card so I'll discount that diagnosis. You have previously been able to get a good long recording of the same sort of subject successfully. That suggests that the card was reliable at one time but it doesn't mean it is still reliable.
    The camera might also shut the camera down if it senses overheating of the internal electronics. This is usually the case when filming a scene with a lot of action. You described that you film yourself drumming and I would think that would qualify as a fairly energetic activity. The reason for the overheating is that the camera uses a compression algorithm (mathematical code) to save the file. The more "changes" there are in a scene, the harder the camera works to stuff all that activity efficiently on your card. This hard work creates considerable heat. If you were to record yourself drumming and had just finished a 15 minute clip, it might be necessary to let the camera cool down before resuming shooting.
    Finally, the room temperature has a effect on how well the camera can shed the heat it builds up. If you had been filming is a realitively mild temperature and moved the camera to a higher temperature area (adding lights might create considerable heat), the camera will not perform as well as it previously did.
    Your camera has a way of telling you it is overheating. Check your manual (p 151) and if you don't have one, go online and get one.
    Good luck.

  • Re: T3i- Movie recording has stopped automatically

    I just bought a brand new sandisk 'extreme pro' 32g card, and set the camera on a windowsill trying to record a jar. It still stopped recording after a few seconds.  It has done this with the last three cards I've tried in it. This is pretty much a brand new camera.

    perusing the interwebs a bit more, i decided to give magic lantern a try. Seems to be working. (There goes my warranty). Also changed the framerate from 29.97 to 24, but, really Canon...if you're going to sell me a camera that claims to record 1080 29.97 on an sd card you should either sell it with a BIG disclaimer or provide cards that you know will work.

  • "Movie recording has been stopped automatically"

    Recently, using my 60D in very cold Wisconsin weather, I've had the message "movie recording has been stopped automatically."  I've used my 60D in all kinds of temps but recently in Wisconsin the overnight temps are getting into the the minus single digits so when I go out to shoot homes in the early am it is cold.  I am using a SanDisk Ultra 16G 30mb/s 10.  It seems that once the camera "warms" up a bit, it shoots fine and I don't get the message.  This happens when I come in from the cold outdoors and begin shooting inside.  I've had no issues with the pictures, just the video portion.  Any ideas? Condensation perhaps?

    60D operating temperatures according to two WEB sources is 32F to 104F.  I suggest a camera overcoat or some way to keep the camera in that temperature bracket when shooting.  I hope the cold temps break for you soon.  
    John  

  • Recording stops automatically

    When I record the recording stops automatically and the
    dialog-window ask me where to save the file.
    It's randomly, sometimes I can record 20 s before it stops
    but sometimes it stops after just a few seconds.
    When I save the file and try to add more recording I can just
    record 1-2 seconds before it stops.
    I have a registered version of Captivate 3 and work on a PC
    with Windows XP Service Pack 2.
    Is this a known problem, or is there someone that can help me
    to solve this anoying problem?
    /Jimmy

    Hi Jimmy
    Really it could be almost anything. Low Computer RAM, the
    method in which you are recording, low disk space, Operating
    System, SunSpots...
    Figuring out how to work past it will likely involve much
    trial and error (and sometimes gnashing of teeth)
    You said XP SP2? I'm guessing that's 32 bit and not 64,
    right? (I know Captivate doesn't play well on 64 bit systems)
    Even though you don't believe you are tapping the End key it
    may be worthwhile to try configuring a different key and testing
    just to see. Perhaps some action of the application is generating
    the code sensed by Captivate as End.
    How are you recording? Typical screen capture mode or full
    motion for all (ick). If it's full motion for all does anything
    change if you switch to screen capture mode?
    That's about all I can think of for the moment. Sure as I
    click the Reply button I'm sure another one or two things I
    *SHOULD* have asked will immediately pop into my pea sized brain.
    Cheers... Rick

  • 70d - movie recording has been stopped automatically

    I just purchased a new Canon 70D...once I start recording, it records for a few seconds...small boxes appear on the upper right side of the display screen and then it shuts down and says "Movie recording has been stopped automatically"...is this due to a setting or something? I have been using a 7D for a number of years and this is a new issue for me...

    Hi, LmharrisonTX!
    You may want to check the type of memory card you're using for this.  HD movie recording requires a fast memory card, and if yours can't keep up, it will be overwhelmed within a few seconds, causing the camera to halt recording.  We recommend using at least a "Class 10" memory card.
    Please let us know what you are using.  If the card is indeed at least Class 10 and you're still having problems, we can at least eliminate that as a possibility and we can examine other factors.
    We look forward to hearing from you!

  • User session stops completely and restarts (GNOME 3.10)

    Since last week I have experienced suddenly closing all applications closing and sending me to the log-in screen.
    Using journalctl I can see that all applications exited with a "Fatal IO error 11 (Resource temporarily unavailable) on X server :0". It all ends with the user session stopping and then being started again.
    Here is a journald log from yesterday at 13:10.
    Jan 16 13:10:35 archvision dbus[358]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such fil
    Jan 16 13:10:35 archvision dbus-daemon[358]: dbus[358]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to
    Jan 16 13:11:52 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: recent-manager-provider.vala:132: Desktop file for "file:///home/bastian/Pictures/Screenshot%20from%202014-01-04%2000:45
    Jan 16 13:11:52 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: recent-manager-provider.vala:132: Desktop file for "file:///home/bastian/Pictures/Screenshot%20from%202014-01-04%2000:45
    Jan 16 13:11:52 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: recent-manager-provider.vala:132: Desktop file for "file:///home/bastian/Videos/sound_styling_table_of_contents.wav" was
    Jan 16 13:11:52 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: recent-manager-provider.vala:132: Desktop file for "file:///home/bastian/Pictures/Screenshot%20from%202013-12-28%2002:13
    Jan 16 13:11:52 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: recent-manager-provider.vala:132: Desktop file for "file:///home/bastian/Pictures/Screenshot%20from%202013-12-28%2002:08
    Jan 16 13:11:52 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: recent-manager-provider.vala:132: Desktop file for "file:///home/bastian/Git/p1-report/out.png" was not found, exec: eog
    Jan 16 13:11:52 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: recent-manager-provider.vala:132: Desktop file for "file:///home/bastian/Git/gitgraph/out.png" was not found, exec: eog,
    Jan 16 13:12:08 archvision gnome-session[512]: (gnome-settings-daemon:569): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: (deja-dup:1993): Gdk-WARNING **: deja-dup: Fatal IO error 104 (Connection reset by peer) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: (transmission-gtk:731): Gdk-WARNING **: transmission-gtk: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: CopyAgent: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: skype: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: xcb_connection_has_error() returned true
    Jan 16 13:12:08 archvision gnome-session[512]: Window manager warning: Log level 16: gnome-shell: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: SparkleShare: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: dropbox: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision colord[420]: Automatic remove of icc-faf837061e668d9b052248618ab54c15 from xrandr-Chi Mei Optoelectronics corp.
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-faf837061e668d9b052248618ab54c15
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-d81d4c735fbeec9cb2338b26b884af5d
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-e01a3aa966ec476f6f7f10befcaf4a93
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-46fc44daad94d12a6b26c88f7d89e032
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-4fe850f70957b4b2d6afcbdf852b8027
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-46965f5505458ec64e8697211a352322
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-23de2f0eaffd00e9354ff9c155d0b8a1
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-b464ec762f975aa10134c2892d60657e
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-92e63b59caa77681fe1f11e64cb069e7
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-10bb2bcfa705d9b655d32bf92f4d65e9
    Jan 16 13:12:08 archvision colord[420]: device removed: xrandr-Chi Mei Optoelectronics corp.
    Jan 16 13:12:08 archvision gnome-session[512]: (evolution-alarm-notify:722): Gdk-WARNING **: evolution-alarm-notify: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: (nm-applet:721): Gdk-WARNING **: nm-applet: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 16 13:12:08 archvision systemd[1]: Stopping Session 2 of user bastian.
    Jan 16 13:12:08 archvision systemd[1]: Stopped Session 2 of user bastian.
    Jan 16 13:12:08 archvision gnome-session[512]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 16 13:12:08 archvision systemd-logind[356]: Removed session 2.
    Jan 16 13:12:08 archvision systemd[1]: Stopping User Manager for 1000...
    Jan 16 13:12:08 archvision systemd[506]: Stopping Default.
    Jan 16 13:12:08 archvision systemd[506]: Stopped target Default.
    Jan 16 13:12:08 archvision systemd[506]: Starting Shutdown.
    Jan 16 13:12:08 archvision systemd[506]: Reached target Shutdown.
    Jan 16 13:12:08 archvision systemd[506]: Starting Exit the Session...
    Jan 16 13:12:08 archvision gnome-session[512]: (deja-dup-monitor:750): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.UDisks2VolumeMonitor disconnected from the bus; removing dr
    Jan 16 13:12:08 archvision gnome-session[512]: (deja-dup-monitor:750): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.MTPVolumeMonitor disconnected from the bus; removing drives
    Jan 16 13:12:08 archvision gnome-session[512]: (deja-dup-monitor:750): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.GoaVolumeMonitor disconnected from the bus; removing drives
    Jan 16 13:12:08 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: zeitgeist-datahub.vala:226: Unable to get name "org.gnome.zeitgeist.datahub" on the bus!
    Jan 16 13:12:08 archvision gnome-session[512]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 16 13:12:08 archvision gnome-session[512]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 16 13:12:08 archvision gnome-session[512]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 16 13:12:08 archvision gnome-session[512]: Received signal:15->'Terminated'
    Jan 16 13:12:08 archvision systemd[1]: Stopped User Manager for 1000.
    Three minutes later it happened again. (journald log again)
    Jan 16 13:14:35 archvision dbus-daemon[358]: dbus[358]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to
    Jan 16 13:15:18 archvision gnome-session[2416]: [228B blob data]
    Jan 16 13:15:26 archvision systemd[1]: Starting Cleanup of Temporary Directories...
    Jan 16 13:15:26 archvision systemd-tmpfiles[3286]: stat(/run/user/1000/gvfs) failed: Permission denied
    Jan 16 13:15:26 archvision systemd[1]: Started Cleanup of Temporary Directories.
    Jan 16 13:15:43 archvision gnome-session[2416]: Window manager warning: Received a NET_CURRENT_DESKTOP message from a broken (outdated) client who sent a 0 timestamp
    Jan 16 13:15:43 archvision gnome-session[2416]: Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1600003 (#archlinux)
    Jan 16 13:15:43 archvision gnome-session[2416]: Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
    Jan 16 13:16:12 archvision gnome-session[2416]: (gnome-settings-daemon:2471): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: dropbox: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: CopyAgent: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: SparkleShare: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: gnome-session[2416]: WARNING: App 'gnome-settings-daemon.desktop' exited with code 1
    Jan 16 13:16:12 archvision gnome-session[2416]: WARNING: App 'gnome-settings-daemon.desktop' exited with code 1
    Jan 16 13:16:12 archvision colord[420]: Automatic remove of icc-faf837061e668d9b052248618ab54c15 from xrandr-Chi Mei Optoelectronics corp.
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-faf837061e668d9b052248618ab54c15
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-d81d4c735fbeec9cb2338b26b884af5d
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-e01a3aa966ec476f6f7f10befcaf4a93
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-46fc44daad94d12a6b26c88f7d89e032
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-4fe850f70957b4b2d6afcbdf852b8027
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-46965f5505458ec64e8697211a352322
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-23de2f0eaffd00e9354ff9c155d0b8a1
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-b464ec762f975aa10134c2892d60657e
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-92e63b59caa77681fe1f11e64cb069e7
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-10bb2bcfa705d9b655d32bf92f4d65e9
    Jan 16 13:16:12 archvision colord[420]: device removed: xrandr-Chi Mei Optoelectronics corp.
    Jan 16 13:16:12 archvision gnome-session[2416]: Window manager warning: Log level 16: gnome-shell: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: (nm-applet:2622): Gdk-WARNING **: nm-applet: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: (transmission-gtk:2632): Gdk-WARNING **: transmission-gtk: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: xcb_connection_has_error() returned true
    Jan 16 13:16:12 archvision sudo[3108]: pam_unix(sudo:session): session closed for user root
    Jan 16 13:16:12 archvision gnome-session[2416]: (evolution-alarm-notify:2623): Gdk-WARNING **: evolution-alarm-notify: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: (empathy:3185): Gdk-WARNING **: empathy: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision systemd[1]: Stopping Session 5 of user bastian.
    Jan 16 13:16:12 archvision systemd[1]: Stopped Session 5 of user bastian.
    Jan 16 13:16:12 archvision systemd-logind[356]: Removed session 5.
    Jan 16 13:16:12 archvision systemd[1]: Stopping User Manager for 1000...
    Jan 16 13:16:12 archvision gnome-session[2416]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    The dmesg log doesn't seem to have much in it, though.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.7-2-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=61f8c7e3-2df0-4a94-9a43-23f12a9c7334 rw resume=/dev/sda2 resume_offset=12656640 quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c96e6fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c96e7000-0x00000000ca08efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ca08f000-0x00000000ca115fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ca116000-0x00000000ca1e8fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000ca1e9000-0x00000000ca621fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ca622000-0x00000000ca622fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ca623000-0x00000000ca665fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000ca666000-0x00000000cade0fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cade1000-0x00000000caff2fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000caff3000-0x00000000caffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cb800000-0x00000000cf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: CLEVO CO. W35_37ET/W35_37ET, BIOS 4.6.5 12/14/2012
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x22f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask E00000000 write-back
    [ 0.000000] 1 base 200000000 mask FE0000000 write-back
    [ 0.000000] 2 base 220000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
    [ 0.000000] 6 base 0CB800000 mask FFF800000 uncachable
    [ 0.000000] 7 base 22F800000 mask FFF800000 uncachable
    [ 0.000000] 8 base 22F600000 mask FFFE00000 uncachable
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xcb800000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fd860-0x000fd86f] mapped at [ffff8800000fd860]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22f400000-0x22f5fffff]
    [ 0.000000] [mem 0x22f400000-0x22f5fffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22f3fffff]
    [ 0.000000] [mem 0x22c000000-0x22f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
    [ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0xc96e6fff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0xc95fffff] page 2M
    [ 0.000000] [mem 0xc9600000-0xc96e6fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xca08f000-0xca115fff]
    [ 0.000000] [mem 0xca08f000-0xca115fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xca622000-0xca622fff]
    [ 0.000000] [mem 0xca622000-0xca622fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xca666000-0xcade0fff]
    [ 0.000000] [mem 0xca666000-0xca7fffff] page 4k
    [ 0.000000] [mem 0xca800000-0xcabfffff] page 2M
    [ 0.000000] [mem 0xcac00000-0xcade0fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xcaff3000-0xcaffffff]
    [ 0.000000] [mem 0xcaff3000-0xcaffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x37978000-0x37cb3fff]
    [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 00000000ca19e080 0007C (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000ca1a72d8 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000ca19e190 09148 (v02 ALASKA A M I 00000021 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000ca1e7080 00040
    [ 0.000000] ACPI: APIC 00000000ca1a73e8 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000ca1a7480 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 00000000ca1a74c8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000ca1a7508 00EA5 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
    [ 0.000000] ACPI: HPET 00000000ca1a83b0 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000ca1a83e8 00315 (v01 SataRe SataTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca1a8700 00926 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ca1a9028 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ca1a9ac0 00574 (v01 SgRef SgTabl 00001000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ca1aa038 00FAC (v01 OptRef OptTabl 00001000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22f5fffff]
    [ 0.000000] NODE_DATA [mem 0x22f5f0000-0x22f5f4fff]
    [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226c00000-ffff88022ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x22f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xc96e6fff]
    [ 0.000000] node 0: [mem 0xca08f000-0xca115fff]
    [ 0.000000] node 0: [mem 0xca622000-0xca622fff]
    [ 0.000000] node 0: [mem 0xca666000-0xcade0fff]
    [ 0.000000] node 0: [mem 0xcaff3000-0xcaffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x22f5fffff]
    [ 0.000000] On node 0 totalpages: 2069138
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12852 pages used for memmap
    [ 0.000000] DMA32 zone: 822518 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19416 pages used for memmap
    [ 0.000000] Normal zone: 1242624 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc96e7000-0xca08efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xca116000-0xca1e8fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xca1e9000-0xca621fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xca623000-0xca665fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcade1000-0xcaff2fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcb7fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb800000-0xcf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xcfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022f200000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2036785
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=61f8c7e3-2df0-4a94-9a43-23f12a9c7334 rw resume=/dev/sda2 resume_offset=12656640 quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8063300K/8276552K available (5115K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 213252K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2394.611 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.77 BogoMIPS (lpj=7982036)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000030] Security Framework initialized
    [ 0.000037] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000038] Yama: becoming mindful.
    [ 0.000541] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002566] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003470] Mount-cache hash table entries: 256
    [ 0.003632] Initializing cgroup subsys memory
    [ 0.003640] Initializing cgroup subsys devices
    [ 0.003642] Initializing cgroup subsys freezer
    [ 0.003643] Initializing cgroup subsys net_cls
    [ 0.003645] Initializing cgroup subsys blkio
    [ 0.003665] CPU: Physical Processor ID: 0
    [ 0.003666] CPU: Processor Core ID: 0
    [ 0.003671] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.004041] mce: CPU supports 9 MCE banks
    [ 0.004054] CPU0: Thermal monitoring enabled (TM1)
    [ 0.004065] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 1
    [ 0.004173] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.005132] ACPI: Core revision 20130725
    [ 0.011088] ACPI: All ACPI Tables successfully acquired
    [ 0.012488] ftrace: allocating 20316 entries in 80 pages
    [ 0.022278] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.055311] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.055317] TSC deadline timer enabled
    [ 0.055324] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.055330] ... version: 3
    [ 0.055331] ... bit width: 48
    [ 0.055332] ... generic registers: 4
    [ 0.055333] ... value mask: 0000ffffffffffff
    [ 0.055334] ... max period: 0000ffffffffffff
    [ 0.055334] ... fixed-purpose events: 3
    [ 0.055335] ... event mask: 000000070000000f
    [ 0.095724] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.082109] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
    [ 0.218035] Brought up 8 CPUs
    [ 0.218039] smpboot: Total of 8 processors activated (38329.18 BogoMIPS)
    [ 0.225368] devtmpfs: initialized
    [ 0.228016] PM: Registering ACPI NVS region [mem 0xca116000-0xca1e8fff] (864256 bytes)
    [ 0.228030] PM: Registering ACPI NVS region [mem 0xca623000-0xca665fff] (274432 bytes)
    [ 0.228771] RTC time: 10:58:11, date: 01/16/14
    [ 0.228806] NET: Registered protocol family 16
    [ 0.228897] cpuidle: using governor ladder
    [ 0.228898] cpuidle: using governor menu
    [ 0.228925] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.228926] ACPI: bus type PCI registered
    [ 0.228928] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.228974] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.228976] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.236206] PCI: Using configuration type 1 for base access
    [ 0.236847] bio: create slab <bio-0> at 0
    [ 0.236959] ACPI: Added _OSI(Module Device)
    [ 0.236960] ACPI: Added _OSI(Processor Device)
    [ 0.236961] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.236962] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.238281] ACPI: EC: Look up EC in DSDT
    [ 0.239565] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.288607] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.288988] ACPI: SSDT 00000000ca03c018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.289328] ACPI: Dynamic OEM Table Load:
    [ 0.289330] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.302166] ACPI: SSDT 00000000ca03da98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.302528] ACPI: Dynamic OEM Table Load:
    [ 0.302530] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.318721] ACPI: SSDT 00000000ca03ec18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.319055] ACPI: Dynamic OEM Table Load:
    [ 0.319056] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.334857] ACPI: Interpreter enabled
    [ 0.334865] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.334868] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.334881] ACPI: (supports S0 S3 S4 S5)
    [ 0.334882] ACPI: Using IOAPIC for interrupt routing
    [ 0.334905] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.335040] ACPI: No dock devices found.
    [ 0.345033] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.345229] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.345415] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
    [ 0.345984] PCI host bridge to bus 0000:00
    [ 0.345987] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.345989] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.345990] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.345992] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.345993] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.345995] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.345996] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.345998] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.345999] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.346001] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.346002] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
    [ 0.346009] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.346096] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.346125] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.346170] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.346203] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.346213] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.346219] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.346223] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.347124] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.347146] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
    [ 0.347218] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.347265] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.347299] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.347322] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b00f 64bit]
    [ 0.347399] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.347484] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.347505] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a18000-0xf7a183ff]
    [ 0.347596] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.347658] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.347692] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.347707] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
    [ 0.347775] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.347824] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.347854] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.347933] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.347984] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.348014] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
    [ 0.348093] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.348144] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.348174] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
    [ 0.348253] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.348305] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.348342] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.348363] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a17000-0xf7a173ff]
    [ 0.348454] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.348513] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.348545] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
    [ 0.348724] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.348743] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    [ 0.348750] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    [ 0.348757] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    [ 0.348765] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    [ 0.348772] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 0.348780] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a16000-0xf7a167ff]
    [ 0.348825] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.348896] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.348911] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a15000-0xf7a150ff 64bit]
    [ 0.348932] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.349064] pci 0000:01:00.0: [10de:0fd4] type 00 class 0x030000
    [ 0.349075] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
    [ 0.349086] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.349096] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.349104] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    [ 0.349112] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.349163] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.355360] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.355365] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.355380] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.355383] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.355452] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.355555] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000
    [ 0.355593] pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf7901fff 64bit]
    [ 0.355775] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.355814] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.362045] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.362061] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.362207] pci 0000:04:00.0: [10ec:5289] type 00 class 0xff0000
    [ 0.362270] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf780ffff]
    [ 0.362784] pci 0000:04:00.0: supports D1 D2
    [ 0.362786] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.362879] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.362979] pci 0000:04:00.2: [10ec:8168] type 00 class 0x020000
    [ 0.363037] pci 0000:04:00.2: reg 0x10: [io 0xd000-0xd0ff]
    [ 0.363148] pci 0000:04:00.2: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
    [ 0.363217] pci 0000:04:00.2: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
    [ 0.363519] pci 0000:04:00.2: supports D1 D2
    [ 0.363520] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.368781] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.368785] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.368789] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.368795] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
    [ 0.368823] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.369733] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.369781] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.369827] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.369872] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.369915] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.369960] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.370004] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.370048] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 0.370236] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.370243] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.370294] Found 1 acpi root devices
    [ 0.370323] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.370389] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.370393] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 0.370394] vgaarb: loaded
    [ 0.370395] vgaarb: bridge control possible 0000:01:00.0
    [ 0.370396] vgaarb: no bridge control possible 0000:00:02.0
    [ 0.370422] PCI: Using ACPI for IRQ routing
    [ 0.371982] PCI: pci_cache_line_size set to 64 bytes
    [ 0.372033] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.372038] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.372039] e820: reserve RAM buffer [mem 0xc96e7000-0xcbffffff]
    [ 0.372041] e820: reserve RAM buffer [mem 0xca116000-0xcbffffff]
    [ 0.372043] e820: reserve RAM buffer [mem 0xca623000-0xcbffffff]
    [ 0.372044] e820: reserve RAM buffer [mem 0xcade1000-0xcbffffff]
    [ 0.372045] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
    [ 0.372047] e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
    [ 0.372123] NetLabel: Initializing
    [ 0.372124] NetLabel: domain hash size = 128
    [ 0.372125] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.372136] NetLabel: unlabeled traffic allowed by default
    [ 0.372156] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.372160] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.374183] Switched to clocksource hpet
    [ 0.377767] pnp: PnP ACPI init
    [ 0.377776] ACPI: bus type PNP registered
    [ 0.377837] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.377840] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.377850] pnp 00:01: [dma 4]
    [ 0.377862] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.377880] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.377956] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.377992] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.377994] system 00:04: [io 0x1000-0x100f] has been reserved
    [ 0.377995] system 00:04: [io 0xffff] has been reserved
    [ 0.377997] system 00:04: [io 0xffff] has been reserved
    [ 0.377999] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 0.378001] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 0.378002] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 0.378005] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.378007] system 00:04: [io 0x3322-0x3323] has been reserved
    [ 0.378009] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378032] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.378073] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.378076] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.378116] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.378119] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378140] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.378164] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.378207] pnp 00:0a: Plug and Play ACPI device, IDs ETD0403 PNP0f13 (active)
    [ 0.378833] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.378835] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.378837] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.378839] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.378841] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.378842] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.378844] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.378846] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.378848] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.378849] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.378851] system 00:0b: [mem 0xcfa00000-0xcfa00fff] has been reserved
    [ 0.378853] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378985] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.378987] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
    [ 0.378989] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.379002] pnp: PnP ACPI: found 13 devices
    [ 0.379003] ACPI: bus type PNP unregistered
    [ 0.385141] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.385144] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.385147] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.385149] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.385153] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.385163] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.385168] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.385176] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.385178] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.385183] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.385187] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
    [ 0.385193] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.385194] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.385196] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.385198] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.385199] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.385201] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.385202] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.385204] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.385205] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.385207] pci_bus 0000:00: resource 13 [mem 0xcfa00000-0xfeafffff]
    [ 0.385208] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.385210] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 0.385212] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.385213] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
    [ 0.385215] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
    [ 0.385216] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
    [ 0.385218] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
    [ 0.385242] NET: Registered protocol family 2
    [ 0.385406] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.385585] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.385695] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.385709] TCP: reno registered
    [ 0.385721] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.385747] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.385806] NET: Registered protocol family 1
    [ 0.385816] pci 0000:00:02.0: Boot video device
    [ 0.421017] PCI: CLS 64 bytes, default 64
    [ 0.421049] Unpacking initramfs...
    [ 0.476133] Freeing initrd memory: 3312K (ffff880037978000 - ffff880037cb4000)
    [ 0.476137] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.476140] software IO TLB [mem 0xc56e7000-0xc96e7000] (64MB) mapped at [ffff8800c56e7000-ffff8800c96e6fff]
    [ 0.476405] Scanning for low memory corruption every 60 seconds
    [ 0.476648] audit: initializing netlink socket (disabled)
    [ 0.476657] type=2000 audit(1389869891.466:1): initialized
    [ 0.488246] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.489340] zbud: loaded
    [ 0.489487] VFS: Disk quotas dquot_6.5.2
    [ 0.489519] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.489651] msgmni has been set to 15755
    [ 0.489888] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.489932] io scheduler noop registered
    [ 0.489933] io scheduler deadline registered
    [ 0.489954] io scheduler cfq registered (default)
    [ 0.490106] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.490450] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.490462] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.490496] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 0.490497] vesafb: scrolling: redraw
    [ 0.490499] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.491479] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 8128k, total 8128k
    [ 0.636131] Console: switching to colour frame buffer device 240x67
    [ 0.780205] fb0: VESA VGA frame buffer device
    [ 0.780223] intel_idle: MWAIT substates: 0x21120
    [ 0.780225] intel_idle: v0.4 model 0x3A
    [ 0.780226] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.780420] GHES: HEST is not enabled!
    [ 0.780463] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.780820] Linux agpgart interface v0.103
    [ 0.780890] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:ELNM] at 0x60,0x64 irq 1,12
    [ 0.784163] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.785597] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.785607] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.785609] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.785610] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.785612] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.785735] mousedev: PS/2 mouse device common for all mice
    [ 0.785878] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.785904] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.785912] Intel P-state driver initializing.
    [ 0.785920] Intel pstate controlling: cpu 0
    [ 0.785931] Intel pstate controlling: cpu 1
    [ 0.785941] Intel pstate controlling: cpu 2
    [ 0.785949] Intel pstate controlling: cpu 3
    [ 0.785957] Intel pstate controlling: cpu 4
    [ 0.785972] Intel pstate controlling: cpu 5
    [ 0.785981] Intel pstate controlling: cpu 6
    [ 0.785990] Intel pstate controlling: cpu 7
    [ 0.786051] drop_monitor: Initializing network drop monitor service
    [ 0.786109] TCP: cubic registered
    [ 0.786182] NET: Registered protocol family 10
    [ 0.786325] NET: Registered protocol family 17
    [ 0.786334] Key type dns_resolver registered
    [ 0.786578] registered taskstats version 1
    [ 0.787128] Magic number: 14:671:982
    [ 0.787215] rtc_cmos 00:05: setting system clock to 2014-01-16 10:58:12 UTC (1389869892)
    [ 0.787265] PM: Checking hibernation image partition /dev/sda2
    [ 0.788167] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.917532] PM: Hibernation image not present or could not be loaded.
    [ 0.918293] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 0.918295] Write protecting the kernel read-only data: 8192k
    [ 0.921673] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
    [ 0.922590] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 0.930285] systemd-udevd[78]: starting version 208
    [ 0.946773] pcieport 0000:00:1c.3: driver skip pci_set_master, fix it!
    [ 0.946873] ACPI: bus type USB registered
    [ 0.946876] rtsx_pci 0000:04:00.0: irq 41 for MSI/MSI-X
    [ 0.946891] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
    [ 0.946903] usbcore: registered new interface driver usbfs
    [ 0.946913] usbcore: registered new interface driver hub
    [ 0.946973] usbcore: registered new device driver usb
    [ 0.947532] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.947546] SCSI subsystem initialized
    [ 0.947733] ehci-pci: EHCI PCI platform driver
    [ 0.947815] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 0.947818] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.947822] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.947912] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.947929] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 0.948102] hub 1-0:1.0: USB hub found
    [ 0.948109] hub 1-0:1.0: 4 ports detected
    [ 0.948401] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.948403] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.948552] libata version 3.00 loaded.
    [ 0.948642] hub 2-0:1.0: USB hub found
    [ 0.948650] hub 2-0:1.0: 4 ports detected
    [ 0.958134] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 0.958140] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.958144] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 0.958158] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.962052] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.962064] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a18000
    [ 0.971372] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.971521] hub 3-0:1.0: USB hub found
    [ 0.971526] hub 3-0:1.0: 2 ports detected
    [ 0.971698] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 0.971702] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.971705] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 0.971715] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.975613] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.975623] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a17000
    [ 0.984789] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.985103] hub 4-0:1.0: USB hub found
    [ 0.985111] hub 4-0:1.0: 2 ports detected
    [ 0.985259] ahci 0000:00:1f.2: version 3.0
    [ 0.985433] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 0.985471] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.998181] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
    [ 0.998189] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
    [ 0.998204] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.018886] scsi0 : ahci
    [ 1.019098] scsi1 : ahci
    [ 1.019311] scsi2 : ahci
    [ 1.019494] scsi3 : ahci
    [ 1.019689] scsi4 : ahci
    [ 1.019866] scsi5 : ahci
    [ 1.019956] ata1: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16100 irq 43
    [ 1.019960] ata2: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16180 irq 43
    [ 1.019962] ata3: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16200 irq 43
    [ 1.019964] ata4: DUMMY
    [ 1.019966] ata5: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16300 irq 43
    [ 1.019968] ata6: DUMMY
    [ 1.308506] usb 1-3: new low-speed USB device number 2 using xhci_hcd
    [ 1.327890] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.329720] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.333161] usbcore: registered new interface driver usbhid
    [ 1.333165] usbhid: USB HID core driver
    [ 1.334114] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input7
    [ 1.334423] hid-generic 0003:046D:C051.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-3/input0
    [ 1.338456] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.339420] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
    [ 1.339425] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 1.339428] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.349868] ata1.00: ATA-9: INTEL SSDSC2CT180A3, 300i, max UDMA/133
    [ 1.349884] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.359418] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
    [ 1.359434] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 1.359436] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.369892] ata1.00: configured for UDMA/133
    [ 1.370166] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CT18 300i PQ: 0 ANSI: 5
    [ 1.435266] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 1.478575] tsc: Refined TSC clocksource calibration: 2394.560 MHz
    [ 1.559838] hub 3-1:1.0: USB hub found
    [ 1.560024] hub 3-1:1.0: 6 ports detected
    [ 1.668796] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [ 1.688767] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.792889] hub 4-1:1.0: USB hub found
    [ 1.793095] hub 4-1:1.0: 8 ports detected
    [ 1.908729] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
    [ 1.908736] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 1.908739] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 2.062606] usb 4-1.6: new high-speed USB device number 3 using ehci-pci
    [ 2.319022] ata2.00: ATA-8: TOSHIBA MK3252GSX, LV010A, max UDMA/100
    [ 2.319029] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.320366] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
    [ 2.320373] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 2.320377] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 2.321451] ata2.00: configured for UDMA/100
    [ 2.321618] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
    [ 2.479612] Switched to clocksource tsc
    [ 2.639562] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.643607] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208DB, TC01, max UDMA/100
    [ 2.653637] ata3.00: configured for UDMA/100
    [ 2.662862] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208DB TC01 PQ: 0 ANSI: 5
    [ 2.983186] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.988352] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/167 GiB)
    [ 2.988411] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 2.988487] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.988493] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.988494] sd 1:0:0:0: [sdb] Write Protect is off
    [ 2.988497] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.988529] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.988537] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.989966] sda: sda1 sda2
    [ 2.990254] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.993241] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.993244] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.993378] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 3.069540] sdb: sdb1 sdb2
    [ 3.070543] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 3.418979] PM: Starting manual resume from disk
    [ 3.418984] PM: Hibernation image partition 8:2 present
    [ 3.418986] PM: Looking for hibernation image.
    [ 3.419700] PM: Image not found (code -22)
    [ 3.419705] PM: Hibernation image not present or could not be loaded.
    [ 3.444138] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.499597] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.500097] systemd[1]: Set hostname to <archvision>.
    [ 3.559092] systemd[1]: Starting Collect Read-Ahead Data...
    [ 3.560163] systemd[1]: Starting Replay Read-Ahead Data...
    [ 3.560463] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.560524] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.560551] systemd[1]: Starting Login Prompts.
    [ 3.560567] systemd[1]: Reached target Login Prompts.
    [ 3.560588] systemd[1]: Starting Remote File Systems.
    [ 3.560603] systemd[1]: Reached target Remote File Systems.
    [ 3.560622] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.560664] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.560678] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.560719] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.560730] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.560749] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.560759] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.560779] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.560811] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.560941] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.560960] systemd[1]: Starting Journal Socket.
    [ 3.561026] systemd[1]: Listening on Journal Socket.
    [ 3.561056] systemd[1]: Mounting Huge Pages File System...
    [ 3.561370] systemd[1]: Starting Journal Service...
    [ 3.561773] systemd-readahead[160]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
    [ 3.561816] systemd[1]: Started Journal Service.
    [ 3.576539] systemd-journald[162]: Vacuuming done, freed 0 bytes
    [ 3.607183] EXT4-fs (sda1): re-mounted. Opts: data=ordered,discard
    [ 3.610857] systemd-udevd[197]: starting version 208
    [ 3.611093] scsi6 : vhba
    [ 3.647675] ACPI: Requesting acpi_cpufreq
    [ 3.648443] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8
    [ 3.648448] ACPI: Power Button [PWRB]
    [ 3.648507] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input9
    [ 3.648511] ACPI: Sleep Button [SLPB]
    [ 3.649258] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input10
    [ 3.663330] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 3.666930] mei_me 0000:00:16.0: setting latency timer to 64
    [ 3.666967] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 3.668677] ACPI: Lid Switch [LID0]
    [ 3.668720] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
    [ 3.668723] ACPI: Power Button [PWRF]
    [ 3.669670] ACPI: Battery Slot [BAT] (battery present)
    [ 3.670212] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.670214] ACPI: Thermal Zone [TZ0] (35 C)
    [ 3.670260] [drm] Initialized drm 1.1.0 20060810
    [ 3.671009] ACPI: AC Adapter [AC] (off-line)
    [ 3.671841] wmi: Mapper loaded
    [ 3.673496] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 3.673503] r8169 0000:04:00.2: can't disable ASPM; OS doesn't have ASPM control
    [ 3.673726] r8169 0000:04:00.2: irq 45 for MSI/MSI-X
    [ 3.673936] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
    [ 3.673942] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.674142] r8169 0000:04:00.2 eth0: RTL8411 at 0xffffc90005f5a000, 00:90:f5:e4:9c:92, XID 08800800 IRQ 45
    [ 3.674145] r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 3.674610] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
    [ 3.674614] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.674616] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.674618] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130725/utaddress-251)
    [ 3.674620] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.674621] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.674623] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130725/utaddress-251)
    [ 3.674625] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.674625] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 3.676500] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 3.680556] cfg80211: Calling CRDA to update world regulatory domain
    [ 3.684359] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 3.684362] Copyright(c) 2003-2013 Intel Corporation
    [ 3.687182] pcieport 0000:00:1c.2: driver skip pci_set_master, fix it!
    [ 3.687240] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 3.687319] iwlwifi 0000:03:00.0: irq 47 for MSI/MSI-X
    [ 3.689230] input: PC Speaker as /devices/platform/pcspkr/input/input13
    [ 3.689318] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input14
    [ 3.691653] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 3.694703] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
    [ 3.699874] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
    [ 3.700326] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
    [ 3.700721] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 3.700968] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 3.700970] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 3.700971] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 3.700972] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
    [ 3.701019] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 3.707821] [drm] Memory usable by graphics device = 2048M
    [ 3.707823] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
    [ 3.707824] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
    [ 3.707825] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 3.707842] Console: switching to colour dummy device 80x25
    [ 3.708353] i915 0000:00:02.0: setting latency timer to 64
    [ 3.719419] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 3.731545] iTCO_vendor_support: vendor-support=0
    [ 3.731802] iTCO_wdt: Intel TCO WatchDog Timer Dri

    zozi56 wrote:Can you reproduce the problem without Skype, Bastian?
    From what I remember I have also had this issue when Skype wasn't open.
    Yesterday my computer started up beeping - I took the harddisk out and it started normally (initramfs tho). Then I put it back in and the laptop have been running fine so far. I suspect it might just have been a bad connection, but I am giving it time..
    EDIT: Still experiencing the issue..
    Last edited by Bastian (2014-01-19 18:09:08)

  • While video taping, the camera says videoing stopped automatically.

    I purchased my canon rebel t2i at Staples, along with a 16GB card with a 10 in the top rt corner.  When recording with my camera, it will often say videoing has stopped automatically. I also cleared everything off the card .  I had it checked today by an employee, but was not sure why that message displays.    He suggested to shut it off and start it up again as it maybe a glitch.   I love this camera, but I need to know why the camera is doing this.  Very frustrating when i am trying to get those special moments with our grandaughter, as they are only here for a short time.  I am very new to this higher classed camera.
      Thankyou.  I hope you can steer me in the right direction!!

    One more thing - sometimes with Canons simply deleting everything doesn't actually clear the space on the card.  You might want to try formatting it as well.

  • How to prevent "Shell Hardware Detection Service" from stopping automatically?

    Long version:
    I have an APC SmartUPS 750 (old one, w/o NIC) connected to my Win Server 2012 box via USB cable. My Server 2012 acts as a UPS web interface server (PowerChute software) that I can monitor via network.
    Now, since Shell Hardware Detection Service stops automatically in Server 2012, the PowerChute software loses connectivity via USB to the UPS and I have to re-plug the USB cable every time for UPS to get detected.
    Short version:
    Anyway I can keep the Shell Hardware Detection Service to run even there is no one logged in?

    Excerpt below taken from the following url:
    http://technet.microsoft.com/en-us/library/hh831394.aspx
    You can configure the Services row to display alerts when services are found in a role or server group that match startup types, service status, service names, and servers that you specify in the
    Services Detail View dialog box.
    After a server has been added to the Server Manager server pool, service alerts about the Shell Hardware Detection service can be displayed if there are no users logged on to the managed server. This occurs because the Shell Hardware Detection service runs
    only when users are logged on to the managed server, or connected to a Remote Desktop session on the managed server. To avoid seeing Shell Hardware Detection service alerts for this case, click
    Services in the thumbnails for server groups, including the
    All Servers group. In the Services Detail View dialog box, on the
    Services drop-down list, clear the check box for Shell Hardware Detection, and then click
    OK.

  • In Pages 5, Maverick, How do I stop automatic conversation of URLs to hyperlinks and seeing them underlined

    There used to be a preference setting in Pages.  Now it seems gone in Pages 5.   So how do I stop automatic conversation of URLs to hyperlinks and seeing them underlined in text.  Sometimes I want it, but not always.

    The preference setting to turn off links is gone. When you enter content that triggers link detection, a link character style gets applied. Right-click on the link, choose Edit Link from the menu, and then Remove.
    To prevent Pages from automatically detecting links, visit Edit > Substitutions > and deselect Smart Links.

  • Stop Automatic creation and confirmation of Transafer Order for a doc type

    Hello All,
    There is a requirement that I need to stop Automatic creation and confirmation of Transafer Order for a particular document type.
    The issue is that sometimes the cycle goes upto creation of Invoice automatically but sometimes this does not happen. More over the user wants that the transafer order needs to be confirmed manually.
    Can u please provide the .steps involved for thie case.
    Thanks
    Chandrashekhar

    Dear Steve,
    Thanks a lot for giving reply with what I need to do, but I am unable to see result.
    I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
    Click on ‘Assign’ button,
    Press on ‘New entries’
    WhN = ‘900’
    Reference Movement Type = ‘101’
    Movement indicator = ‘B’
    Movement type for Whse Mgmt = ‘101’
    TR create Transfer Requirement = ‘X’
    Immed.TO Creation
    Mail confirmation for background processing = ‘01’.
    GR date = ‘2’

  • How can a session be setup between two MacBook Pro's at different locations on high speed Internet connections, be setup to have a live recording session in Logic?

    My partner and I live on opposite sides of the valley here in Phoenix. About 50 miles apart one way. We are Musicians and are working on a commercial for television, and would like to know if there is a way, between FaceTime and Logic, that we can configure our MacBook Pro's to record sessions together without having to be at the same house? When we FaceTime, he can hear my keyboard through his headphones, but we can't seem to get the signal routed into Logic and register to a track when its record enabled. Is there a way for us to save gas, and record at seperate locations, so he can engineer me and I can engineer him, while we build this project in Logic and Final Cut? Here is what we are using, we have nearly identicle setups, which was planned so we might be able to do something like this. Both of us are using Mid 2012 15" MacBook Pro's with 2.6GHz Intel i7 processors and 16GB RAM. The only difference between the two MacBooks is that his has an Optical Drive, but I removed mine and replaced it with a 2nd SSD Drive, so I have two Samsung 840 Pro's each with 512GB in my MacBook Pro. His just has one Samsung 840 Pro with 512GB. We both use Focusrite Saffire Liquid 56 Firewire Audio Interfaces, and we both use Logic Studio 9 Academic. I don't know if you need to know what we are using in order to help us figure out how to configure the MacBooks for a live session, so I figured I would give you those details just in case. If you need any more information, just let me know? Oh, we both have high speed cable Internet connections. Mine is 150Mbps speed which is the absolute fastest I can get in my area. And his is only a 50Mbps speed line.
    Again, what we are looking to do is have a LIVE recording session, in Logic, with him at his house and me at my house. When we FaceTime each other, we can pretty much hear each others keyboards as if they were part of the conversation, and as crystal clear as we can hear our own when recording, but we can't seem to record enable an Audio track in Logic and route that keyboard signal into Logic and record it so we can engineer each other without either one of us having to drive to the others house, to be there to do it. If any of this even makes sense, I'm not quite sure how to better explain it. So hopefully you get what I mean, otherwise just say so, and I will try to do a better job explaining it.  :-)
    Anyone who can help us with this little problem would be greatly appreciated, and quite a hero in these two humble Musicians Worlds!! So from both of us, THANK YOU in advance for any input you might be able to give us. I look forward to hearing any and all suggestions.
    Scott

    Hey Scott
    You and ALOT of people are attempting to do this, myself included.
    Unfortunately at this point (to my knowledge) it's a pretty CRAP setup involved that will likely leave you frustrated.
    HOWEVER:
    A few things CAN be done:
    IF you are getting live audio from your partner over the internet, you can re-direct that audio directly into Logic using a program called SoundFlower.
    There are a few alternatives to SoundFlower, like JackTrip, and.....(the name eludes me)
    (SoundFlower is from a company called Cyling 74 who also makes Max MSP. )
    Once in Logic, you set your audio inputs to the track to be Soundflower. (either 16 inputs, or in this case 2)
    That all being said, regardless to speed, you are still going to experience latency in the connection, and THAT is the part that will likely drive you to the mad house.
    THIS all being said, I believe there are websites out there that are set up to actually do this kind of thing, (at least there WERE) but likely membership costs, and other "hidden" problems that you only learn about after you have signed on the dotted line. (Hopefully I am wrong?)
    If you don't need to do a "live jam", there are always solutions like DropBox that work very well for exchanging large files quickly.
    If you want to record live MIDI input from his keyboard, I am unaware of any solutions for this.
    Due to the popularity of the iPad, you might want to look into the App store, and see if there is something available.
    Good luck!
    Treatment

  • Is there a way to delete records from MDM automatically?

    Is there a way to delete records from MDM automatically?
    I am able to import the data automatically through MDIS, but I have to delete the data first. Itu2019s possible to do it ?

    Hi Adam,
    Current scenario
    USER1: call ME to delete old catalog data
    ME: open the MDM & delete it manually
    USER1: Transaction to extract new data file
    MDIS: load the data to catalog
    As per your requirement, you should save map in following way which can solve your purpose. Create a XML file which should consist of new and existing records. So in import Manager, for newly added records you need to set Default Import Action as Create and for existing records you should use or set Default Import Action as Replace and then should save in map.
    So using this every-time if new record comes (not available in data manager), it will get created and for existing record (already available in Data Manager) it will replace (which means delete the existing record (old catalog data) and create a new record).
    Regards,
    Mandeep Saini

  • How do I stop automatic email notifications?

    How do I stop automatic email notifications?
    I had thought that I was subscribing to just a single thread but it appears that I'm now being notified about every message in every thread.  The last time I logged on I received over 200 messages.
    If it doesn't stop I will have to resort to changing my email address.

    http://forums.adobe.com/message/1876437#1876437
    Post #3,
    Juergen

Maybe you are looking for