Recording Smart Phone - full motion not capturing stylus movements
I am trying to create a recording that shows the movements of a stylus on a smart phone. I have the smart phone connected using active sync and am using pocket controller to project onto my computer. All of the captures work fine if i use the mouse to make the movements.
However, i want show how someone can use the stylus to transcribe right on the phone, rather than flipping out their keyboard.
For some reason, i can't get the full motion recording to capture the stylus movements.
any suggestions?
Thanks so much
Lynn
Hi Lynn
I find that as good as Captivate is, it falls short on full motion. So you may wish to investigate other alternatives for those full motion bits, then drop them into the Captivate slides for playback. I've done this using Techsmith's Camtasia Studio. You might try that. Not sure if the trial will watermark things or whatever. You might also investigate Jing or Screenr. Perhaps either one of those will produce a SWF you could drop into Captivate.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks
Similar Messages
-
Audio + full motion not good on 800Mhz cpu
I created some full motion captures, added audio to them
later and played them back on several computers.
the audio is compressed at 22Khz at 96 bit rate. The full
motions are 15-40 seconds long. They play fine on computers (MAC or
PC) with over 1 Gig processor and over 1 Gig or RAM. They
completely hog cpu, stutter and stop on a machine with 512 RAM and
800 Mhz processor.quote:
Originally posted by:
MICHAEL LEBIEN
I created some full motion captures, added audio to them
later and played them back on several computers.
the audio is compressed at 22Khz at 96 bit rate. The full
motions are 15-40 seconds long. They play fine on computers (MAC or
PC) with over 1 Gig processor and over 1 Gig or RAM. They
completely hog cpu, stutter and stop on a machine with 512 RAM and
800 Mhz processor
On a related note, I've run into the similar issues while
authoring, only I'm on a 2.4 GHz machine with 1 gig of RAM.
Captivate is an utter RAM PIG.
One thing that seems to help some is turning hardware
acceleration OFF. This seems to free up some resources so that
Captivate doesn't bog your machine quite so bad. Its a wonderful
program overall, but it'd be nice if it were a little more
optimized, performance-wise. Many operations are slow compared to
some of the competition. -
I made a video on my iPhone 4S and e-mailed to another party to view. The other party told me he could not view it. He said he got a "not available" message when trying to view it. Next I sent the video to him in a text message. He had the same problem again.
I have the same exact problem. let me know if you figured anything out
-
I am considering buying an android phone. Will iTunes allow me to download my music to the android?
Yes I have done this before with a Nexus 5. But it won't work if you're using a Mac. To do it you need iTunes and Windows Media Player which is only available on Windows.
-
Captivate 7 Trial version not capturing all movements
This is a new trial install and record settings are for Training, tried Auto/Manual Panning, etc. and only the last slide appears. I cannot get the software to record anything else. Is there something I am not doing?
Hi there,
May I know the application you are trying to capture? Can you please try recording a 'Word document' in Training mode with automatic /manual panning and see its working or not?
Thanks,
Nimmy Sukumaran. -
Where are the rented movies on itunes located? I see them on my iphone, but I am unable to locate them in my itunes, even via searching the name. Thank you!
You cannot.
from the article you linked:
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer."
iTunes Store: Movie rental frequently asked questions (FAQ) -
Hi,
1) Can a TOC with several chapters be made for a full motion capture video?
2) Can the mouse have a clicking animation, like I have used in demonstration mode?
Thank you.Hi Janet
In case the process of obliterating the Captivate_v10.dat
doesn't work (and it may not, since it's not a "cure all" as some
would have you believe) you might want to try looking at the
options for full motion capture. One of the options deals with
enabling and disabling hardware acceleration. Click Options >
Recording Options... > Full Motion Recording tab > Record at
higher full motion capture rate for smoother movie.
If this option is DE-selected, try selecting it and recording
again. If it's selected, try DE-selecting and recording again.
I'm not saying that the .DAT file isn't corrupt. So go ahead
and try that too. I'm only saying it's not the end all solution for
all problems Captivate.
Cheers... Rick -
OK, I have cerated a number of chapters in an onlien tutorial
and they are all working fine. But now I am creating one chapter
that will need to utilize a long (20-30 secs.) of full-motion
video. When I do the capture, and switch over to full-motion (F9),
it appears everything is fine. I switch back (F10) and then end my
recording.
The first issue is that Captivate breaks up the full-motion
section into several segments, resulting in a visible glitch
between them when playing back. (I am also finding that the program
crashes frequently when working with full-motion, so I am saving
and restarting frequently.)
But the real problem comes in playback over the web. There
seems to be a problem in the file picking up the swf video at the
right moment and I am sometimes seeing nothing but a black screen.
If I play the file a few times, then it seems to load and play back
OK, but is there anything I can do to ensure a consistent playback?
Thanks!
bobbyHi Ray,
You are experiencing "normal behavior" for the use you are
putting Captivate to. It was never designed as a full motion video
capture tool. I won't argue whether or not the marketing people
ever said it was capable of doing what you say you bought it to do,
but I really doubt they would make a claim that everyone knows is
not true ... if you can find something official from Adobe
asserting that, I'd sure be interested in seeing it.
The full motion feature was intended to be used to
demonstrate 2-3 second drag-and-drop operations, or use of a
scroll bar action of about that duration. In addition, you stated
you are capturing at 1024x768 size, which is an image of truly
gigantic proportions - adding to the full motion load you are
already throwing at the product. Could it be that another product
is better suited for what you want to do? I'd consider that
seriously because you are asking more of Captivate than I believe
it can deliver on anything but a machine designed for 2015
processor speeds with infinite resources.
It is especially sad that you own and used Captivate 1.0.1,
then spent an additional 30 days using the Trial version of
Captivate 2.0 ... but are just now finding it doesn't do what you
thought it should do. Again, sorry for your trouble.
. -
Full Motion Video - memory leak?
Good afternoon.
I am using captivate 1.01.1418.1418 to record and present
standalone demos of rich client web technologies. The default
capturing techniques just don't cut it, so I need to record the
entire demo in full motion video.
What I have noticed is that when you edit the video AND ALSO
when running the published demo using either stand-alone or swf
object methods that there is a huge memory leak. I am talking to
the magnitude of 20-25 meg / second while displaying full motion
video.
My latest presentation is 22 slides where 3 of them are short
full motion video clips recorded at 1024x768 with no audio. The
clips are between 30-90 seconds.
The generated output exe is 6 megs and if I generate it with
all compression off it is 11 megs. When I run it, my memory usage
goes to 1.7 GIG of Physical Memory and over 2 GIG of Virtual Memory
in use. The movie playback then turns solid red and my machine
hangs up until I can manage to kill the playback.
Is there a known issue with full motion video and memory
leaks? I can understand if it took more memory to run it, but using
3+ gig of RAM to play a 10 meg file? Something sounds off to me.
I had purchased this product to record and display full
motion demos and so far it has not been able to meet the needs it
promised to deliver.
Any help anyone provides is greatly appeciated.
Please respond here and/or email me at
[email protected]
Thanks in advance for your time.
-Ray
P.S. I remember seeing the same behavior on my trial version
of Captivate 2, however, my trial has expired and I cannot see if
the leak is of the same magnitude.Hi Ray,
You are experiencing "normal behavior" for the use you are
putting Captivate to. It was never designed as a full motion video
capture tool. I won't argue whether or not the marketing people
ever said it was capable of doing what you say you bought it to do,
but I really doubt they would make a claim that everyone knows is
not true ... if you can find something official from Adobe
asserting that, I'd sure be interested in seeing it.
The full motion feature was intended to be used to
demonstrate 2-3 second drag-and-drop operations, or use of a
scroll bar action of about that duration. In addition, you stated
you are capturing at 1024x768 size, which is an image of truly
gigantic proportions - adding to the full motion load you are
already throwing at the product. Could it be that another product
is better suited for what you want to do? I'd consider that
seriously because you are asking more of Captivate than I believe
it can deliver on anything but a machine designed for 2015
processor speeds with infinite resources.
It is especially sad that you own and used Captivate 1.0.1,
then spent an additional 30 days using the Trial version of
Captivate 2.0 ... but are just now finding it doesn't do what you
thought it should do. Again, sorry for your trouble.
. -
Cc text not displaying when using full motion recording
Hello everyone,
I wanted to find out if anyone has experienced a problem with
cc text not being displayed on slides with full motion recording.
I have added and sync'd the cc text on a slide that has full
motion recording. When publishing the file, no cc text appears in
the the published file.
Is there a workaround or a setting that I need to check to
ensure that the cctext shows up?
Any information which anyone can provide would be greatly
appreciated.
SherryHi Sherry,
I'm having the same problem you were last year! Just wondered if you were able to find a workaround.
I have a full motion page with audio embedded in it (meaning that the audio does not show up as its own item in the timeline view). When I open the Advanced Audio Management dialog box, I'm not able to add a caption because CP4 doesn't think there's sound on this slide. (see attached screen grab -- the slide in question is slide 9. You see that the caption button is greyed out).
I've really hit a wall on this one today. I tried deleting the audio and re-adding it from the library, but it doesn't get added as an independent object in the timeline box; it just gloms onto the "captured animation" object.
Maybe it's simply not possible to have a closed caption on a FMR page? That doesn't seem right though.
Thanks, all.
Janet -
Capture Screen Shot not working in Full Motion
I am trying to use Full Motion Recording to capture mouse
movement, while also manually capturing screen shots. The screen
shots are not being captured though. I've tried the default Print
Screen key, and also resetting it to the Down key, with no success.
I can capture the screen shots when Full Motion Recording is not
active.
The information in the Help files and Knowledgebase seem to
indicate that it's possible to manually capture screens while
recording full motion. Any suggestions about what could be going
wrong?
Thanks.Hi LisaLouLou and welcome to our community
I think the help may be misleading you here. If you are
recording by using the total “Full Motion Capture”,
Captivate ignores the Print Screen key because you have told it
that the entire project is to be recorded using Full Motion. Hence,
there is no slide by slide based recording as there is using the
other options.
After you have recorded, you are free to insert blank slides,
then add images as needed in case that helps.
Cheers... Rick -
Cannot record Full Motion slides EVER
I recently upgraded to v.3 from 2 since I thought this would
take care of the bugs that plagued my Captivate 2 experience. While
they were annoying, I could still work around those issues
comfortably and get my work accomplished.
However after upgrading to v.3, I have not only been seeing
the same bugs as before, but now I am encountering a whole series
of new issues. My biggest problem is that I can't get Captivate to
do FMR, ever:
- It won't record full motion slides when I scroll a web page
or drag and drop something.
- It won't do it during demo mode even if I force it with F9
and F10 (I only end up with regular slide captures where the full
motion slides should be).
- If I put Captivate in Full Motion Recording mode, it
records a single plain slide, regardless of how long I ran the
capture session for.
Any assistance you could provide would be greatly appreciated
as I am not having the best luck with your tech support helpdesk
(long hold times and dropped calls). We use Captivate exclusively
for our course development and getting this feature to work is
crucial to us. If I can't get this fixed - any way I can get a
downgrade back to v.2?
Thanks,
DanielAll, I have discovered the last Captivate update (which is
causing caption text formatting issues) is also responsible for my
issue with Full Motion Recording. I did not notice this at first
since Captivate updated almost immediately after my first reinstall
so I continued to observe the issue. The only solution I have found
is to reinstall the software and then delete the AdobeUpdater.dll
library file in the Captivate directory in the Program Files
folder, which forcibly disables the Adobe Updater - I haven't found
any other way to do this.
It's kind of frustrating since I will need to watch out for
the next update that will fix what was broken in the last one and
once that is out, reinstall the software to add back the updater. I
share the frustration that I see from many of the users here - most
of the "solutions" to Captivate issues that I read on this forum
are no more than hacks, and I wish that the software could just
work properly - that way, I wouldn't need to "fix" my issue with
the latest update through a hack like reinstalling and deleting the
updater library.
Adobe, during future product design, please consider that
maybe your users would like the ability to disable updating when
you push out updates that break your own products. -
Hi,
I have a full motion recording that is fine until I place a 100% solid highlight over some white thext that is on part of my desktop where I am recording, set it to arrange to back and or merge with background, but when a dialog box from the application I am recording comes up, it is partially hidden by my highlight box.
I have tried it with a smart shape too, but same problem comes up...and I cannot change the desktop background in my department at work.
Any help please, much appreciated.
RosscoRossco,
Are you talking about Video Demo recording? It is because you talk about 'merging with background', which is not possible when you are doing such a recording? The video editor allows only to put objects like highlight boxes on top of the video.
Lilybiri -
Audio out of sync with presentation (not using full motion)
When I preview or publish a project using Captivate 5, the audio is out of sync with the presentation. I am not using any full motion recording, which I know has caused audio/video sync issues in previous versions of Captivate. The audio is slide specific, with a separate audio file for each slide. (In other words, I'm not trying to break a large audio file over many slides.) When each slide is viewed individually -- in the workstation, in the preview window, or in the published version -- the audio is synced just fine. The problem arises only when I try to watch the entire presentation (approx. 10 minutes in length). The audio gradually lags behind the visual. By about half way through the project, the visual presentation is noticably ahead of the audio. By the end, the audio is nearly 4 seconds behind the video. I cannot detect a noticeable change in pitch or speed of the audio, so if the audio is being altered in any way, the alteration is slight.
However, if I use the playback controls to advance to a single slide, the audio is fine for that slide and those immediately after, although it does gradually get off again as the project progresses. (So, for example, if I start the playback in the middle of the project, the audio will only be off by about 2 seconds by the end, rather than 4.)
I have tried various publishing options (although I don't think publishing is the problem, since this happens when I preview the project as well). I have used 2 different computers and also tried viewing the published version locally and streaming. None of these alterations seem to make a difference. By the end of the presentation, regardless of how the project is published or viewed, the audio is several seconds behind the video.
My specs:
Captivate 5
Microsoft XP OS
2 GB RAM
Publishing to .swf
Suggestions?Hi Mukul,
Thank you very much for your careful responses. Here are the answers to the questions.
First of all, the "slow video" behavior does appear only after adding the slides mentioned in previous post.
1. I created a “software simulation” project. It IS a capture+audio recording.
2. Since I recorded the audio while doing screen capture, almost every slide has audio, which is not convenient to edit at all. Is there any other better way that I missed so that we can keep the audio and video at the same step while editing them? As I know so far, either insert silence or delete a little audio to one slide, the audio becomes short, but the slide duration time is still the same as before unless we change that manually which normally is not precise enough to match the audio.
3. I tried to add the blank slides at where there is a pause of speaking and where they are close to the problem slides. Otherwise, the speaking would sound weird.
4. Published SWF file size is 20.6 MB.
5. I do have two externalized video files for title and end.
6. Unfortunately, it is still slow even if it played on a different system.
And another problem comes up these days. After publication, the screen resolution is not good (like some grey ink left on screen) wherever click or type something. It did not happen before even if worked on the same computer.
I am very sorry that there are so many problems. I have been working on this for long time. The project totally drove me nuts. Hopefully you have more ideas about that.
I really appreciate your help.
Sincerely,
Linda -
I'm currently trying to create help files for Flash
animations using captivate instead of screen recording software
dude to file size, with the type of animation I have to activate
Full Motion Capture Recording. the problem I get is the file size
for the 10-15 seconds I'm capturing, I have reduced some of the
onscreen movement and animation so there is less action on the
recording but the file size is still a little to big and there
appears to be very little in the way of options for how the Motion
Capture is setup, in Captivate 1 there is a video quality option
which when reduced below 70% make the video un-useable so I assume
that’s why this feature is missing from Captivate 2.
Anyway I'm babbling now, I have tried to export the Motion
clip to SWF and incorporate it into Flash but upon importing to
stage the video has a lot of strange symbols that look like
possible masks captivate uses to move content in the animation, so
is there any other way to export the Motion capture in captivate to
another format.
Regards
Stuart TawseHi Klaudia78 and welcome to our community
Firstly, Captivate has always been rather weak in the full
motion category. However, having said this, you may want to look at
the following options:
Click Options > Recording Options... > Full Motion
Recording tab. You may wish to make the following changes:
* Ensure the opton "Disable hardware acceleration" is enabled
(checked)
* Ensure the option "Video color mode" is 32 Bit
Click Project > Preferences... > Preferences tab and
ensure the option "Frames per second" hasn't been changed from 30.
If so, try changing to 30.
Hopefully these help... Rick
Maybe you are looking for
-
Interactive report using Infoset quiereis with SQ01,SQ02,SQ03.
Hi, I have to create a report by using the infoset query with SQ01,SQ02 and SQ03 Tcodes. But problem my requerment is that I have to create one interactive report with these quereis. Can any body tell me how to create this interactive repor
-
when I try to use loadjava to import a Java Class, it fail with ORA-03113. After that all the function in package DBMS_JAVA cannot function. I try to reinstall the JVM, but the problem still happen. Below is the trace file which generate by the loadj
-
FAGLB03 - Restrict user access to view only two GL accounts.
We want certain users to access only two GL accounts using transaction FAGLB03. Any help will be highly appreciated.
-
Can I do that on the iPhone 4? I like the convenience of having my email account on my phone, but I don't like that I'm ALWAYS logged in. I'd like to log out from time to time just because of in case my phone is stolen or lost, I don't want someone t
-
The nullptrexception error + code
this program is infact taken from an old forum message. The code and the error message in mentioned below. Please help me find out the reason for this error. Thanks a lot. import javax.swing.*; import javax.swing.event.*; import java.io.*; import jav