Recording Software continues to look for Audigy after Audigy is disab

I disabled Soundblaster in the Window XP Pro configuration I use for recording, yet when I open Sonar I get two error messages, both of which say "There are no Creative audio products installed and running on the system that support ASIO". The drivers don't appear in the audio configuration dialogue in Sonar.
I installed a MOTU Traveler, and want to use this for recording. Unfortunately, if I have Soundblaster enabled, the MOTU drivers are all grayed out in Sonar, and the MOTU unit is unusable.
According to the Sonar tech support this is not a Sonar problem but a Soundblaster problem, and the only way he knows of solving it is to uninstall the SB drivers. I'd rather not have to uninstall them, but would like to keep them installed but disabled in case I want to use the SB for something in the future.
Anybody have any solutions?
Thanks in advance.
Matt
Audigy 2
Windows XP Pro SP2
Intel P4 2.4

In Sonar Options->Audio->Drivers -tab, unselect all Audigy I/O drivers first to get the MOTU drivers selectable ... then select the MOTU ones.
jutapa

Similar Messages

5 won't stop looking for network after successful connection

iPhone5 won't stop looking for wifi network after successful connection. Told by tier2 support it is software issue. Complete reset didn't work
Thanks

You do have to unmount any Network Drives when/before moving to another location.
I'm thinking the APPs that don't work right have some pref on the non-existing network drive/cpu, for instance, if they automatically open the last doc used.

Software and application cd for Soundblaster Live/Audigy Windows

Hello, i have got a Soundblaster Li've Platinum 5. and a computer with Windows xp. I need the software and application cd for the Soundblaster li've/audigy to make it work as i want .Who can help me get this cd or a copy?Anton.

Download Sound Blaster CD ISO?s:
http://hosted.filefront.com/BadBoyforum

Passing cursor record values to procedures - looking for advice

I frequently use cursors in my programs and need to pass the values from said cursor around in the program to other procedures/functions. I am looking for advice on the best or recommended way of doing this.
Currently the majority of my programs do something like this:
CREATE OR REPLACE PACKAGE BODY some_pkg AS
     CURSOR some_cursor IS
          SELECT t.col1,
                           t.col2,
                          t.col3,
               FROM some_table t;
PROCEDURE sub_proc
     (p_cursor               IN      some_cursor%ROWTYPE)
IS
BEGIN
     dbms_output.put_line(p_cursor.col1);
END sub_proc;
PROCEDURE main_process
IS
     l_cursor          some_cursor%ROWTYPE;
BEGIN
     FOR l_cursor IN some_cursor LOOP
          sub_proc(l_cursor);
     END LOOP;
END main_process;
END some_pkg;
Basically I create the cursor as global so I can use it's %ROWTYPE as a parameter datatype in my procedures.
I understand there are other options such as using a defined record type, or ref cursors, but I'm not totally clear on how ref cursors would help me, I don't really understand them well.
Can anyone provide some feedback on how I currently handle this situation vs. the alternatives?
Thanks

I am not sure what you need to do.
You can base records on cursors or tables using the %ROWTYPE operator.
Cursors can be defined in the package header and used elsewhere by using normal cursor functionality (untesed)
create or replace package my_package as
cursor my_cursor is
    select *
      from dual;
my_procedure;
end my_package;
create or replace package body my_package as
procedure my_procedure is
my_record my_package.my_cursor%rowtype;
begin
    for r in my_package.my_cursor loop
      my_record := r;
    end;
end my_procedure;
end my_package;
This can allow you to define the cursor in one place and reference it elsewhere.
Reference cursors are pointers to result sets. They reference actual datasets and can be passed between routines if defined in package headers. There is a little more overhead using reference cursors but they support dynamic sql if needed (it usually isn't). and you MUST carefully coordinate FETCH commands to receive the values the cursor is selecting (this is harder than it looks)(untested)
create or replace package my_package as
type my_refcur_type is sys_refcursor;
my_procedure;
end my_package;
create or replace package body my_package as
procedure my_procedure(p_refcur out my_package.my_refcur_type) is
begin
    open p_refcur for 'select * from dual';
end my_package;
--elsewhere
my_package.my_procedure(my_cursor);
fetch my_cursor into v_dummy;
Hope this helps

Software Update not looking for updates

I have software update enabled to check daily for any updates, I logged in yesterday and today, knowing that updates were available, however my iMac did not seem to be looking for any updates. I manually checked and updates were available on both days. Is this an OS X problem, or does it take a while for OS X to check for updates once logged in.. The only change that has occurred in the past week has been a 50% speed reduction in my broadband service. Current speed around 2.5MB.
Regards Craig

I just got my MacBook Pro and ran Software Update first thing. It said I was all up to date. I then downloaded iWork '08. When I tried to install iWork it said I needed OS X 10.4.10. I checked my about mac and sure enough I am running 10.4.9. My Quicktime is also 7.1.5. Why would software update tell me I'm all up to date if I have this older software on my computer. This thing has only been out of the box a few hours and I have installed exactly nothing on it. Anyone have any ideas?

I HAD AN EXTERNAL WIRELESS HARD DRIVE, I NO LONGER USE IT, BUT MY IMAC AT START UP CONTINUES TO LOOK FOR IT. IS THERE ANY WAY TO DELETE IT ?

I HAD AN EXTERNAL WIRELESS HARD DRIVE, THAT I DO NOT USE ANY MORE, BUT MY IMAC KEEPS LOOKING FOR THE HARD DRIVE AT STARTUP. IS THEIR ANY WAY TO DELETE IT, SO IT WONT KEEP LOOKING FOR IT ?

Boot in safe mode.
Log in and see whether you still have the problem. If you don't, it's caused by one of your login items or a system modification that loads at startup or login.
If the problem isn't resolved that way, other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, and bookmarks in the Preview application
See Connection Failed, Server Does Not Exist.

Application in Software Center ask again for installation after succesfull instalation

SCCM 2012 SP1 CU5
I have created msi application version 2, in superseding I configure uninstallation of old version
App deployed for collection and showed in Software Center.
If I install it in Software Center, old app is removed, new installed (appenforce.log tells it), and its ok for some time.
After PC checks for software deployment, Software Center asks to install new app again.
But its installed and works.
in AppIntentEval.log I can see this record:
<![LOG[ScopeId_C499A53E-0FFD-4150-8731-0DF9D0B88558/Application_07897b40-25ff-4c91-af1e-0c5a914bd0ee/6 :- Current State = NotUpdated, Applicability = Applicable, ResolvedState = Installed, ConfigureState = NotNeeded, Title = Клиентская часть системы
DIRECTUM 4.91.1908]LOG]!><time="09:54:55.223-300" date="11-27-2014" component="AppIntentEval" context="" type="1" thread="1364" file="appconstructs.cpp:3057">
What does it meens Current State = NotUpdated ?
How can I fix it?

Hello,
Is it required or available? Is it deployed to user collection or device collection?
This thread may give us some clue:
https://social.technet.microsoft.com/Forums/en-US/b785809a-2234-4b67-8838-c1c923ca1601/application-deployment-status-not-updated?forum=configmanagerapps

How can I install PhotoStich software without it looking for the CD?

I've misplaced the software that came with my T4i. I have downloaded all of the software from the T4i Driver\Software site. I was able to install all of the software except for the PhotoStich software. When I run the installer, it wants to do a CD search. Is there a way to install the software with out it asking for the original CD's?

Yes, but you have to modify your registry.
Here is the link on how to: [Mod note - removed link per FORUM GUIDELINES. This is a violation of the software licensing agreement.]
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

What software am I looking for?

Hello all, first time posting here.
I have some very specific needs when it comes to organizing and using my videos and I'm having a hard time trying to learn the basics of video making AND finding a software that is simple to use and does the job.
Basically I need a software (or more than one?) that does the following:
- Copies segments of DVD movies (not necessairly chapters) - allowing me to specify starting and ending time. I need it to copy the segment with subtitles, if possible. (I'm an ESL teacher in Brazil and I use my powerbook in class, but nothing is more annoying than having to carry my DVDs, go through thousands of menus and still have to forward to a specific scene to show my students)
- Allows me to put these segments that I've extracted into one single file
- Convert files to a format that most DVD players can read (the ones at my school seem to struggle with MPG4 - I use EasyWMV)
My Powerbook does not have a DVD burner, bad decision making when I bought it...
Can anyone suggest any software?
Cheers,
Lily

Hi lilylu,
welcome to getting started forum.
Unfortunately we cannot post of how to rip dvd in here, since apple will not allowed us to post something that will infringe copyright:
+Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.+
Taken from here:
http://discussions.apple.com/help.jspa#terms
Apology for I cannot help your further more.
Good Luck

Dreamweaver CC continues to look for Photoshop CS5

I upgraded from CS5 to CC and I know now stupidly did not uninstall CS5 first.
I am running Mavericks (Mac OSX 10.9.1)
My issue is that while using Dreamweaver CC I try to edit a jpeg using the edit tool on the properties panel. At first the tool tried and succeeded to open the image in Photoshop CS5. Well I of course wanted it to open in Photoshop CC so I uninstalled Photoshop CS5 thinking that I could repoint it to the newer version. (Ha!)
I have tried the following to correct the issue.
I opened a jpeg file and used the get info function to open with Photoshop CC.
I uninstalled and reinstalled dreamweaver CC.
I know some people on windows have hacked the registry to fix... no clue how to do that on a mac.
Help greatly appreciated.

I have found my solution.
Preferences--> File Types / Editors --> repoint to Photoshop CC and make primary

Recording Software for WVC210G ip camera

Hi all,
I have an issue with finding the Camera Recording software.
we purchased the ip camera WVC210G and was searching for the Camera Recording software 'L-VM300-04' for viewing 4 Cameras.
But from Cisco and Distributor we came to know that the product has the EOL(End of Life)
So it would be great if anybody can suggest the equivalent software for the same
Regards,
Sooraj

Hi Sooraj,
Thank you for posting. The Video Monitoring Software is developed by Nuuo: http://www.nuuo.com/
I believe that they have a similar product to L-VM300-04 and you can license the software from them if you can no longer obtain a license for the Cisco product.

Video recording software for Logitech camera

Hello,
I want to know if I can attach my Logitech camera to my PowerBook G4 to RECORD surveillance video.
Is my old laptop compatible with Logitech? (I presently have this camera connected to my MINI drive for skype).
If it is compatible, would you recomend a video recording software, I can use for my G4?
Please let me know if surveillance video recording is possible using my powerbook!
Thanks!
martha

The only software that I know of which will work with 10.3 is Debut Video Capture for Mac or EchoFX
I believe they are paid versions, but do come with a trial version. There is nothing I've seen on the Open Source market for video capture.
There is a link here on how to use Quick time broadcaster, that you could adapt it to record security footage I'm sure.
http://macdevcenter.com/pub/a/mac/2003/07/01/isight.html
Best of luck.

Microsoft Lync 2010 continuously asks for credentials after signing in

Hi,
we have lync 2010 frontend server at our office, it is working fine for the all the users, but one user who will connect our network through VPN it will continuously prompts for credentials eventhough if we are providing right credentials, because of this
user will be not able to recieve emails from his outlook. all other VPN users working fine. how to troubleshoot this issue, please any help?
Regards
Asha

Hi,
The issue may occur if the Outlook integration is not correctly on this client after connecting through VPN. What is the
difference for the location or sign in type between this user and other working users?
Lync generally only prompts you for credentials after you are logged in when it must connect Lync to a linked service such as the Microsoft Exchange Free/Busy service or the Calendar service.
If Lync continues to ask for credentials after three separate dialog prompts, there is likely an issue with Outlook integration or with the Exchange services themselves. I suggest referring to the following information to check the issue.
http://support.microsoft.com/kb/2298541
http://support.microsoft.com/kb/2436962
Regards,
Kent

Mac OS X Lion Migration Assistant "looking for other computers"

I just installed Mac OS X Lion from Snow Leopard. I actually did a clean install and during the setup, I attempted to use the Migration Assistant to transfer my Time Machine Backup, saved on a Time Capsule, but after selecting to transfer from my Time Machine, it shows my Time Capsule but continuously is 'looking for other computers". The drive shows at the top and I'm able to click continue, even while it still searches, but once I click continue, i put in my Time Capsules passowrd, it continues to search and i can no longer click continue. It never stops searching.
I found article how to fix this in Snow Leopard http://support.apple.com/kb/HT3253?viewlocale=en_US but the setting are different in the Security tab in the Preferences. There is no 'Allow all incoming computers'. I have tried both with firewall on and off and neither way works.
Let me know if you have a fix for this, as I have 250 gbs waiting on my Time Capsule to be imported.
Thanks,

SImilar problem here, migrating from an old MacBook Air to a new one (directly, not via backup).
During the new Mac's initial setup, I followed all the steps properly as instructed (and made sure the original machine's Firewall was off). I tried both my main WiFi network and an ad hoc network, with Internet Sharing. (Ad hoc proved VERY finnicky to even get a connection. Miserable--it would work or it wouldn't, and I had no power over it: it would fail on the same config where it would succeed. A shame, because ad hoc would be the ideal, low-interference way to get the fastest WiFi transfer. And it's a method Apple's support site even suggests.)
No matter what I did, both machines just stuck at "Looking for other computers" forever. I spent hours trying to get it to work. I wasn't going to buy an ethernet adapter, nor a new external HD (with some third-party backup software as a workaround) just so I could power on my new Mac and have my stuff on it.
Eventually I gave up, installed without migrating, and then ran Migration Assistant after the fact. That DID connect OK (took about 1 hour per 10 GB and was done by morning).
But doing it that way was a mess: there was NO warning when I did the initial setup that I should not use my own name as the main account if I planned to migrate later. Who knew? I couldn't migrate after the fact because I had the same name on both machines. Well.... of course! Don't most people keep the same name? It's as though you're not expected to ever buy another Mac unless you're a newlywed woman. (None of which would be an issue if migration would happen during initial setup as it should.)
So I had to create a superfluous extra account with admin privileges, run Migration Assistant from there, replace the redundantly-named new account, and then find and delete the redundant account where it was stashed during migration. Lastly, I deleted the superfluous admin account as well. THREE accounts needed to be involved, for a process ANY Mac-to-Mac buyer will face. There was nothing special about my migration.
I don't think most users could even figure out all these steps.
A loyal Air user buying a new Air should not be such an incredible hassle. It "just doesn't work."

Looking for a Labview job. Any offers or suggestions?

Hi, everybody!
I wish we had labview.jobs or something. Since we have not yet,
I would appreciate any hints regarding looking for a Labview job,
especially for people with just 1 year of experience,
beside emailing everybody on the NI Alliance list and searching
general purpose job sites.
In case prospective employers read this, my cover letter and resume follow:
Dear Manager:
Thank you for taking time out of your busy schedule.
You will find that my resume which is attached,
outlines why I am an excellent fit for a
position with your company. In addition to my broad
educational background including two Masters degrees
in Electrical Engineering and Physics, numerous
Computer Science courses taken, and ten years of
diverse experience in programming and system
administration and support, I have just finished a
successful control and data acquisition project in
Labview which is also described in my resume.
My experience and background enable me
to master any software development tool and/or
environment very quickly, which makes me a perfect
candidate who can always keep up with the
ever-changing world of computer technologies.
I am looking forward to discussing this opportunity
with you.
Sincerely,
Stanislav Rumega
2000 Goldsworth Valley, Apt. #X-5
Kalamazoo, MI 49008
Telephone: (616) 387-5967
[email protected]
http://free.prohosting.com/~styrum/webresume.shtml
OBJECTIVE:
To obtain a full-time Software Engineer, Developer,
Programmer, or Analyst position after graduation from
Western Michigan University in April 2000. Willing to
consider positions that are usually offered to
candidates with BS degrees too.
SUMMARY:
- Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
HTML, SPARC Assembler;
- Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
- Software: LabVIEW, Maple V, FoxPro, MS Word,
MS Excel, CorelDraw , Internet Explorer, Netscape
Navigator, various utilities and other packages;
- Fluent in English and Russian.
EXPERIENCE:
Teaching/Research Assistant, 1997 - Present
Department of Physics, Western Michigan University,
Kalamazoo, MI
- Taught undergraduate physics labs;
- Graded student papers;
Project:
Developed a control and data acquisition program for
an electron spectrometer system in the WMU accelerator
laboratory. The program was written in LABVIEW.
The project involved controlling and retrieving
data from devices on a CAMAC crate as well as
GPIB (IEEE-488) instruments connected to the system
via a GPIB to CAMAC interface. A computer communicated
with the system via a serial (RS-232) port on the
crate controller.
Engineer/Programmer, 1993-1997
The Association FACTORIAL-SERVICE, Rostov-na-Donu,
Russia
- Supported all the available computer resources and
other equipment (a phone switching system, phones,
faxes, copiers, etc.);
- Selected, purchased, installed, configured all the
hardware and software used at the office;
- Installed and administered a LAN;
- Designed and coded applications;
- Fine-tuned complicated off-the-shelf Accounting and
Sales software which had their own built-in
languages and required programming;
- Trained users;
- Provided translations between English and Russian.
Engineer/Programmer, 1992-1993
Joint Stock Company TRANSINFORM, Moscow, Russia
- Provided some preparatory work and marketing for
the introduction of an X.25 packet-switched
computer network in Rostov-na-Donu, Russia.
Engineer/Programmer, 1991-1992
Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
Moscow, Russia
- Developed a FoxPro application to calculate traffic
accident rates depending on road conditions.
EDUCATION:
Candidate for Master of Arts in Physics,
1997 - Present Western Michigan University,
Kalamazoo, Michigan
Anticipated graduation date: 04/00.
Computer Science GPA: 3.8,
Overall GPA: 3.4 on a 4.0 scale.
Computer Science courses taken:
- Computer Science II (Object-Oriented C++
Programming);
- System Programming Concepts (UNIX, C);
- Computer Organization and Assembly Language
(SPARC);
- Principles of Database Management Systems (SQL,
PL/SQL);
- Data and File Structures (C++);
- Programming in Maple V;
- Programming Languages (Principles of Programming
Languages, Web Programming: HTML, Java).
Awards:
- Dean's List, 1998-1999;
- David Carley Memorial Award, 1998;
- Department Award for Graduate Student Teaching
Effectiveness,1999.
5-yr. Diploma in Radiophysics and Electronics,
an equivalent of an MS in Electrical Engineering,
1991 Rostov State University,
Rostov-na-Donu, Russia
Numerous courses in Mathematics, Physics, and Computer
Science taken.
GPA: 4.7 on a 5.0 scale.
Project: Developed a simulation of a conveyor
multiprocessor system. The program was written
in Pascal.
Awards:
- Received a higher stipend for high academic
achievements every semester, 1984-1987,
1989-1991.
ACTIVITIES:
- Graduate Student Advisory Committee, Member,
1999-2000;
- Association of Information Technology
Professionals, WMU Student Chapter, Member,
1999-2000.
- Volunteer Student Safety Patrol, 1989-1991.
WORK AUTHORIZATION:
Authorized to work in US for 12 months after
graduation, which can be extended for up to
6 years with employer's help through
petitioning for a working visa.
In Canada, an employment authorization (EA) must be
obtained before starting employment.
REFERENCES:
Available upon request.

Forgot to mention - go to any jobs web site and enter LabVIEW as a keyword - for
example, I went to http://www.monster.com/ and found 301 postings.
"John D. Seelbinder" wrote:
> Viewpoint Software Solutions is looking for a software engineer with LabView
> experience:
> http://www.viewpointusa.com/employment.html
>
> FWIW I do not work for, or have a financial interest in Viewpoint Software
> Solutions.
>
> Stanislav Rumega wrote:
>
> > Hi, everybody!
> >
> > I wish we had labview.jobs or something. Since we have not yet,
> > I would appreciate any hints regarding looking for a Labview job,
> > especially for people with just 1 year of experience,
> > beside emailing everybody on the NI Alliance list and searching
> > general purpose job sites.
> >
> > In case prospective employers read this, my cover letter and resume follow:
> >
> > Dear Manager:
> >
> > Thank you for taking time out of your busy schedule.
> > You will find that my resume which is attached,
> > outlines why I am an excellent fit for a
> > position with your company. In addition to my broad
> > educational background including two Masters degrees
> > in Electrical Engineering and Physics, numerous
> > Computer Science courses taken, and ten years of
> > diverse experience in programming and system
> > administration and support, I have just finished a
> > successful control and data acquisition project in
> > Labview which is also described in my resume.
> > My experience and background enable me
> > to master any software development tool and/or
> > environment very quickly, which makes me a perfect
> > candidate who can always keep up with the
> > ever-changing world of computer technologies.
> >
> > I am looking forward to discussing this opportunity
> > with you.
> >
> > Sincerely,
> >
> > Stanislav Rumega
> > 2000 Goldsworth Valley, Apt. #X-5
> > Kalamazoo, MI 49008
> > Telephone: (616) 387-5967
> > [email protected]
> > http://free.prohosting.com/~styrum/webresume.shtml
> >
> > OBJECTIVE:
> > To obtain a full-time Software Engineer, Developer,
> > Programmer, or Analyst position after graduation from
> > Western Michigan University in April 2000. Willing to
> > consider positions that are usually offered to
> > candidates with BS degrees too.
> >
> > SUMMARY:
> > - Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
> > HTML, SPARC Assembler;
> > - Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
> > - Software: LabVIEW, Maple V, FoxPro, MS Word,
> > MS Excel, CorelDraw , Internet Explorer, Netscape
> > Navigator, various utilities and other packages;
> > - Fluent in English and Russian.
> >
> > EXPERIENCE:
> >
> > Teaching/Research Assistant, 1997 - Present
> > Department of Physics, Western Michigan University,
> > Kalamazoo, MI
> > - Taught undergraduate physics labs;
> > - Graded student papers;
> >
> > Project:
> > Developed a control and data acquisition program for
> > an electron spectrometer system in the WMU accelerator
> > laboratory. The program was written in LABVIEW.
> > The project involved controlling and retrieving
> > data from devices on a CAMAC crate as well as
> > GPIB (IEEE-488) instruments connected to the system
> > via a GPIB to CAMAC interface. A computer communicated
> > with the system via a serial (RS-232) port on the
> > crate controller.
> >
> > Engineer/Programmer, 1993-1997
> > The Association FACTORIAL-SERVICE, Rostov-na-Donu,
> > Russia
> >
> > - Supported all the available computer resources and
> > other equipment (a phone switching system, phones,
> > faxes, copiers, etc.);
> > - Selected, purchased, installed, configured all the
> > hardware and software used at the office;
> > - Installed and administered a LAN;
> > - Designed and coded applications;
> > - Fine-tuned complicated off-the-shelf Accounting and
> > Sales software which had their own built-in
> > languages and required programming;
> > - Trained users;
> > - Provided translations between English and Russian.
> >
> > Engineer/Programmer, 1992-1993
> > Joint Stock Company TRANSINFORM, Moscow, Russia
> >
> > - Provided some preparatory work and marketing for
> > the introduction of an X.25 packet-switched
> > computer network in Rostov-na-Donu, Russia.
> >
> > Engineer/Programmer, 1991-1992
> > Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
> > Moscow, Russia
> >
> > - Developed a FoxPro application to calculate traffic
> > accident rates depending on road conditions.
> >
> > EDUCATION:
> >
> > Candidate for Master of Arts in Physics,
> > 1997 - Present Western Michigan University,
> > Kalamazoo, Michigan
> >
> > Anticipated graduation date: 04/00.
> > Computer Science GPA: 3.8,
> > Overall GPA: 3.4 on a 4.0 scale.
> >
> > Computer Science courses taken:
> > - Computer Science II (Object-Oriented C++
> > Programming);
> > - System Programming Concepts (UNIX, C);
> > - Computer Organization and Assembly Language
> > (SPARC);
> > - Principles of Database Management Systems (SQL,
> > PL/SQL);
> > - Data and File Structures (C++);
> > - Programming in Maple V;
> > - Programming Languages (Principles of Programming
> > Languages, Web Programming: HTML, Java).
> >
> > Awards:
> > - Dean's List, 1998-1999;
> > - David Carley Memorial Award, 1998;
> > - Department Award for Graduate Student Teaching
> > Effectiveness,1999.
> >
> > 5-yr. Diploma in Radiophysics and Electronics,
> > an equivalent of an MS in Electrical Engineering,
> > 1991 Rostov State University,
> > Rostov-na-Donu, Russia
> >
> > Numerous courses in Mathematics, Physics, and Computer
> > Science taken.
> > GPA: 4.7 on a 5.0 scale.
> >
> > Project: Developed a simulation of a conveyor
> > multiprocessor system. The program was written
> > in Pascal.
> >
> > Awards:
> > - Received a higher stipend for high academic
> > achievements every semester, 1984-1987,
> > 1989-1991.
> >
> > ACTIVITIES:
> > - Graduate Student Advisory Committee, Member,
> > 1999-2000;
> > - Association of Information Technology
> > Professionals, WMU Student Chapter, Member,
> > 1999-2000.
> > - Volunteer Student Safety Patrol, 1989-1991.
> >
> > WORK AUTHORIZATION:
> > Authorized to work in US for 12 months after
> > graduation, which can be extended for up to
> > 6 years with employer's help through
> > petitioning for a working visa.
> > In Canada, an employment authorization (EA) must be
> > obtained before starting employment.
> >
> > REFERENCES:
> > Available upon request.

Recording Software continues to look for Audigy after Audigy is disab

Similar Messages

Maybe you are looking for