Recording software tracks simultaneously in 10.3 is not working for me

How do I record software tracks simultaneously on 10.0.3? When I press the record button on each software instrument track and press record on the main, it only records the highlighted track even though I hear both instruments.

A few dozen have looked so I may not be alone. Yet no one has offered a suggestion? I am still at 10.2.2.214 and iPhone on iOS 4.2.1. iTunes takes very long time to open 3+ minutes and does not respond when device connected then fails to see any device connnected. Will Apple address or fail to fiind this issue? two years ago a few months passed and few upgrades then iPhone was recognized. All worked fine until last month with10.2 update. What are my options here? Please I have gone through ideas presented here for amonth, get one or two to work for a day and then fail after that. I would like to get stable operation of iTnes and then I'll leave things alone. I really do find the 3GS a good buy right now but, with no iTunes why buy it?

Similar Messages

Recording audio and software tracks simultaneously ?

recording audio and software tracks simultaneously ?
I am recording a software piano instrument track and a vocal audio track in logic Pro X. Problem#1
When the replace"X" button is selected,
when recording audio and a software track simultaneously,
I can hear the previously recorded instrument track that I am recording over.
(very distracting)
When recording a software instrument track alone (without simultaneously recording an audio track)
The software/midi instrument track will record over and erase existing data and I will not hear the previously recorded track. (as it is suppose to do) Problem #2
Both tracks are armed ready to record.
If the software instrument track is not highlighted, it will not record.
The audio track will record regardless of whether it is highlighted or not. Craig C.
Calistro Music

Click record on the MIDI/Inst track.
Shift click record on the audio track.
Hit record

Can I record multiple tracks simultaneously in v. 1.1?

Hey, I found some instructions online about how to record multiple tracks simultaneously in version 3, but I can't figure out how to do it in the old version I have, 1.1. Any help is appreciated. I'm crossing my fingers and hoping this feature wasn't implemented later. I have a two-mic setup for podcasts, and need to record both on diff. tracks.

Multi-track recording was added in v2
From STP 2 Manual - New Features:
Multitrack Recording
With Soundtrack Pro 2, you can record across multiple tracks in the Timeline. (This is limited only by your hardware setup.)
So, not available in v1
Have you tried Garageband?

Recording 2 tracks simultaneously?????

I'm having trouble recording 2 tracks simultaneously in Logic Pro 7. I'm recording a podcast and want to record 2 separate mic's, one for each host.
I have the Lexicon Lambda audio recording interface.
For some reason i cant figure out how to select "Input 2" for my "Track 2". I guess that's really all i need to know how to do........ select "Input 2". I've seached throughout the program and clicked everywhere and just cant seem to figure out how to select it. I click on the bar that says "Input 1", but nothing happens.
Even if i do figure out how to select "Input 2" (which i think i did one night), will i be able to record 2 tracks at once, using 2 different inputs?
This is driving me nuts......... it seems so easy, but i just cant figure it out!!!
Thank you!! Love you!!!!!!

So I've made progress..... In the menu of the Audio window on the left where it says "Channel: Track 2", I click on the little arrows and I am able to select "Input 2". But then the window underneath the Audio window (the window with the level meter) changes a bit.
I am able to highlight the record button on both tracks 1 and 2, and i'm showing separate volume readings for each...... so everything is good so far.
The problem comes when i actually hit record. I hit record, and the cursor runs, but nothing gets recorded. No waveforms pop up. I've figured that this only happens when i have "Input 2" selected.
Track 1 still will record, but only if it's record button is highlighted by itself.
This is driving me insane!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I have noticed that in any track that i have "Input 2" selected, the little snowflake button dissapears, as well. This snowflake button is next to the mute and record buttons in the track window. I dont even know what this snowflake button does. Is it a "solo" button? Button. Button. Button.
Does anybody know what is going on??
Do I need to select some kind of "Stereo" setting or something in my Preferences?
Please help!!!!!!!!!!!!!!!

How can I record multiple tracks simultaneously?

How can I record multiple tracks simultaneously? Or rather what hardware do I need to do this? I currently run guitars and mic into a PA and then the PA into Garageband. But this is just one track. I want to record the guitar as one track while simultaneously recording vocals as another track. What hardware do you suggest - keeping it affordable?

if you want to use your two chanel PA, pan 1 channel to the left, and the other to the right, and set one GB track to Mono 1 and the other to mono 2.
if you want better quality, any two channel interface will work:
http://www.bulletsandbones.com/GB/Interfaces.html

I just updated to the new software and now my app Store is not working It is just a white blank page

I just updated the new software and now my app store will not work I have shut it down and opened up again and nothing just a blank white page ?

I'm having a similar problem.
New iPad with iOS6 just downloaded.
I cannot purchase any new items from the new Apple Store now!
It keeps asking me to fill in CC details, asking for security number, but stays red when i fill in the 3 numerals and when I click done I get a Time Out message.
This is not good Apple!!
Looks as if I will have to use my iPad One to purchase from the Apple Store.

Software Update Point Switching is not working for some Clients

Hi there,
I found nothing similar here and I hope this is the right section.
I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
From how I understand SUP switching as described here
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
make no attempt to switch.
I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
are available in my environment.
I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
Things I tried additionally to all the log file / WMI / registry sniffing:
Removing the Software Distribution Folder and restarting the Windows Update Agent
Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
"reset" on those machines without reinstalling them.

Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reloading software and reset to original factory settings.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?

Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Motion tracking is not working for videos but works for images?

Motion tracking is not working for videos but works for images. When the videos is drop onto the tracking object the videos corner don't appear highlighted. I am working on windows 7 with version 13.1.

ivanhoeeurope
Are you within 30 days of purchase for the Premiere Elements 13? And, did you purchase as a download from Adobe? If so, you can
apply for a return/refund for 13. If you purchased elsewhere, then you would be governed by the return/refund policy of the seller.
Adobe no longer sells version 12, so you would have to find a vendor who still has it in stock and purchase it. There is no way to "downgrade"
13 to 12.
What you may want to do is to download and install the Premiere Elements 12 tryout from the following web site to verify that 12 Motion
Tracking works for you; whereas 13 cannot with regard to use of video for the Motion Tracking source media.
Adobe Photoshop Elements 12 Direct Download Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
Apparently this web site does not sell the tryout. It just makes it available for use.
Before I posted my reply to you I looked at Motion Tracking with video source media on both Premiere Elements 12/12.1 and 13/13.1 on the same Windows 7 64 bit computer.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

"Track Shipment" is iOS4 does not work for Canada Post tracking numbers

Not 100% sure this is the best forum to post this but couldn't find an iOS specific forum.
When an email arrives with a shipment tracking number embedded in it, iOS4 is smart enough to recognize it and turn it into a link. You click the link, select "Track Shipment" and in theory you get sent off to the appropriate shipment tracking website.
Problem is that this does not work for Canada Post tracking numbers, I get sent to the USPS tracking site instead of the Canada Post one. I assume that the number format is similar but there must be a way to distinguish between CPC tracking numbers and USPS tracking numbers (by range ?).

This has since become working in 4.0 and higher.
I noticed I now get a notes folder for each of my email accounts (ie. in my case; MobileMe gets one, Gmail gets another, and Virgin Media a yet another). And all three since accordingly correctly between Notes mailbox on iPhone 4 and it's counterpart Notes mailbox in the mac mail app under Reminders section.
Additionally, just like other main mailboxes (inbox, drafts, sent, trash, junk), they also have a "unified" box at the top in both mac and iphone, in order to view notes in all email accounts at the same time.
Hooray Apple, shame it took so long, but at least it's here now

HT204308 Did software update today and now iPhoto is not working. I have OS X Yosemite 10.10.3

Did software update today and now IPhoto is not working. Operating system is OS X Yosemite 10.10.3

What OS X version did you upgrade from? What iPhoto version did you have before upgrading? You cannot upgrade a version of iPhoto from a pre-10.10.2 OS X version installation. You needed iPhoto 9.6.1.

Greetings. Software is not working for me. Can not go to your heath.

Greetings. Software is not working for me. Can not go to your heath.

You will need to explain in more detail the problem you're attempting to solve. Since your command of English appears to be perhaps less than fluent, you may want to try posting your question in your native language.
Regards.

How can I record 2 tracks simultaneously in GarageBand for iOS?

I am trying to record 2 tracks at the same time, one, a line in for my guitar and the other a vocal mic. I am using an Alesis i/o Dock with my iPad Air 2, everything is updated, and everything is plugged in correctly. When I select either track from the multitrack screen, I can see that both work appropriately. However, when I hit the record button, the screen goes from the multitrack view to the track that is 'highlighted' and the record process goes from there. So if the 'amp' (guitar) track is highlighted, the app take me from the view with both on it to the 'guitar amp' selection, showing the head that I selected. Now, in the past, I have recorded 2 tracks at the same time. I still have the original recording showing both tracks and their settings. Even when I try to match the setting (both were on Left Channel, for example) it doesn't work. On my recent attempt to record (the one this question is about) I put the mic track on Right Channel and the line in on Left Channel, and vice versa. I tried putting them both on the same thinking that maybe that's what I did before because the app might not be able to do both Channels at the same time. I tried using the Mic track in stereo and the Line In on Left and tried it on Right; nothing. Has GarageBand taken this feature out on iOS? I do see if I had a Mac there is an 'Enable Multirack Recording' box to check, but I don't see anything like that for iOS... Can anyone help??

in one the YouTube Tutorials, it is not possible in iOS. but hopefully in the later version it should be.

Will a USB or FireWire mixer allow me to record multiple tracks simultaneously in GB?

Hi there. I'm very much new to home recording but have an acoustic guitar and mic that I'd like to connect up to my iMac. I was wondering if a USB or FireWire mixer would allow me to record each instrument as an individual track in GB or would the sound all be compressed into one track? Many thanks for your help.

callumbm wrote:
I was wondering if a USB or FireWire mixer would allow me to record each instrument as an individual track in GB
yes, but if all you need are two tracks, even an analogue mixing console will work. a tutorial:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrecording2tracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

New iMac...trying to set up sound recording form the internet but my microphone isn't working for facetime. I have soundflower installed...recording into Adobe Audition. Can't seem to get them all working...any help?

I'm just setting up my iMac, and am not very familiar as I'm just coming over from Windows. Working on setting up my recordeing software (will most likely be Audition) and I need to be able to record from the internet as well as from a microphone.
I've installed soundflower but now the micropohone is not working in facetime. What is the proper way to set all this up?
Thank you!
Frank

O.K. fgonoz98
I would do 1 thing at a time:"now the micropohone is not working in facetime"
Here is what you can check to get your mike working in facetime:
1. Hold down option while you click on the speaker next to time a. date,
under input Device see if your mic is marked. If not: ✔️
2. Click the apple top left/System Prefs./click on the Sound speaker:
under Input highlight microphone.
3. When you have factime on go to video above scroll and see if your mic is marked ✔️
If that does not get it to work there is more you can check:
(Utilities/Audio, midi setup)
For any other audio device you do this for input and output.
If you get stock post back

Recording software tracks simultaneously in 10.3 is not working for me

Similar Messages

Maybe you are looking for