Recording sound from the PC

I am currently running a mixer into the front audio input jack on my PC, and have all external stuff (mic, mini disk, etc) coming through that.
Am I able to set up audition so that it can also record sound from the PC. For example, if I want to grab audio from a you tube video, or have an online voice chat or something enabled, can I open audition and record it? I have tried, but not been successful. My only idea is having to run the audio out of the PC, into a channel in the mixer, and then back into the PC with everything else.
Any help?

Evergyro wrote:
Where is the link?
This so-called 'forum' has absolutely no use for its FAQs any more. Fortunately, AudioMasters has saved them all, and you can find that particular one here.

Similar Messages

Recording audio from the web without recording sound from the internal microphone...

Is there a way to record audio sound sources, for example a webcast in a browser, without without also recording sound thru the built in internal microphone on the MacPro laptop running Mountain Lion?

You need something along the lines of Audio Hijack Pro or WireTap Studio. The latter is currently broken in Lion and Mountain Lion for your purposes, so that leaves Audio Hijack Pro. Neither is free, but both are worth their asking price (well, WireTap Studio will be once they deign to repair it).
HTH.

HP Mini 110-1160SA problem recording sound from sound card

I am trying to record sound from the sound card itself rather than an external or internal microphone, using a free software called Sonarca Sound Recorder. For example, I play radio from the internet using the BBC Iplayer. I have Windows 7 Starter. When I use the Windows Control Panel > Hardware and Sound > Manage Audio Devices, I get a window called Sound. I press the Recording tab, and get a choice of Internal Microphone, External Microphone, and Stereo Mix. According to my sound recorder software's documentation, I need to select that Stereo Mix, because it means "record whatever the sound card is playing". However, the Stereo Mix recording device, despite having a red tick mark next to it is "Currently Unavailable". How do I make it available?

to be honest, i am not sure about your problems, normally, you need to set stereo mix as default device, then using recording devices to record sound on windows 7. Since you cannot make it, why not insall a virtual sound device, it works like a real one, install this streaming music recorder on your system, start recording. Just test it out by yourself.

HP Probook 6550 - record sound from web

My probook has an IDT sound card. I want to be able to record sound from the web to Audacity but when I select IDT as the input it says it is unavailable. If I right-click on the speaker icon in the system tray it also says in the 'recording' tab that IDT is currently unavailable. I have checked that it is enable, working correctly and selected as default recording device.

Hi Mike-fiacre,
I am sorry, but to get your issue more exposure I would suggest posting it in the Commercial Forums since this is a commercial product or Business product. You can do this at here.
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?

i have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?reco

You may get a better response in this community:
https://discussions.apple.com/community/app_store/garageband_for_ios

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Recording sound from DVD and CD play

I just bought a Zen V Plus. Could someone please tell me how to record sound from a DVD and/or CD to my MP3? Thank you!

Try this:
1. Connect the Line IN jack on your player to the line output of an external stereo source, such as a CD or MiniDisc player, using the supplied line-in cable.
2. Press the Back/Options .You may need to do this more than once until the main menu appears.
3. Select Extra button to start a line-in encoding.
5. On your external stereo source, start playing the song you want to encode.
6. While encoding, you can press and hold the Back/Options button and select one of the following items:
Pauses the encoding. You can also pause the encoding by pressing the Play/Pause button.
Stops and saves the encoding. You can also stop the encoding by pressing the Record
Split Ends and saves current recording session, and begins a new one.
7. Press the Record button to end the line-in recording. The recorded track is named LINE followed by the date and time of the recordin YYYY-MM-DD HH:MM:SS<. For example, if you record a track on March 5, 2004 at 2:57 pm, the track is named LINE
This information can also be found in your user's guide, it's a .chm file found in your installation cd.

Can't record sound from DVD player

I just built a new DAW with a Gigabyte MoBo that has the Realtek sound chip on board. I installed an M-Audio external Fast Track Pro connected to the computer with USB 2.0. With the two sound devices I can play Band in a Box (my main band) through the Realtek and out put to my mixer. I then use my Line 6 Pod XT as a preamp to my guitar that also goes to my Behringer mixer. I connect the main out (R&L) from the mixer to the 1 and 2 inputs on the M-audio. I set Audio Hardware setup in AA3 to use the M Audio device for input and am able to record mixer output to tracks in AA3. I tried several configs and this is the only one that I found that works. All is good so far.
I installed a SATA DVD player (Lite on 24x) that works fine, but it plays through the M-Audio via USB, bypassing the Realtek chip, and the sound does not show up in AA3. I'm thinking I need to route the DVD output to the mixer to use the channel that is already set up. I've been trying to output the DVD player through the onboard Realtek but can't find any way to direct it to do so. I don't necessarily need it to play through the Realtek, but I want to be able to record from the DVD player.
So, does anyone have any idea how to direct the output of the DVD player to the sound card of choice? I'm stumped.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Is there a way to record sounds from keyboard as they are?

So I have a musical keyboard that I've attached to my macbook to record in Garageband. I have a ton of sounds on my keyboard from percussion, brass, piano, etc.
When I record, for example, a trumpet sound from my keyboard into Garageband, Garageband just records the notes using its one version of trumpet or piano or whatever.
How do I get GarageBand to just record the sound as is?
I tried the "real instrument" track option but that ends up record all sound from the microphone on the MacBook and not recording the sound through the MIDI connection.

goneil wrote:
Is there a way to record sounds from keyboard as they are?
http://www.bulletsandbones.com/GB/GBFAQ.html#recordkeyboardssounds
(Let the page FULLY load. The link to your answer is at the top of your screen)

Capturing sound from the soundcard

Hello,
Does Audition make it possible to capture the sound from the sound card?
I don't want to record a sound using a microphone, I want to save the sound which is played on the sound card.
Regards

Assumption: You are trying to record using the internal sound card in your computer.
Right click on the speaker in the task bar (normally lower right of the screen).
Select "Open Volume Control".
In the "Volume Control" application in the menu select "Properties" from the "Options" menu.
Click on the "Recording" radio button and hit "OK".
This will bring you to the "Recording Control" dialog box. Check the
"Stereo Mix" radio button.
On most computers this will change input for Audition v3 to listen to the output of the sound card.
Note1: Make sure you are using "ASIO4ALL" or "Audition 3.0 Windows Sound" or you won't hear or record anything because two applications can't use most standard ASIO sound drivers at the same time.
Note2: Make sure you change it back to "Microphone" or you won't be able to record using the computers internal sound card.

Recording sounds on the fly

Can anyone tell me if you can record sounds on the fly?
By that I mean during my voice recording and not in post production.
Our podcast is a live event. We do no editing or postproduction. Currently I use a PC to play sounds and feed them through the mixer into the line in on my iMac. I was hoping that GB3 podcast recording would allow me to just double click a file and have it added to my mix. I can't seem to figure out how to do this.
Most podcasters I know do zero post production. I can't understand why Apple wouldn't provide this feature.
Thanks,
Bry

Seems like we both have the same problem! I figured out how to assign an mp3 to a track then drag it to the "Musical Typing Keyboard" See this thread for details:
http://discussions.apple.com/thread.jspa?messageID=1512131��
You can also see my thread too, I appear to be asking for the same thing but dragging in each audio track seems way too complicated. I just want to play my audio clips from iTunes (from a little tempary playlist) during my show aka Daily Source Code. Let's figure this ***** out!
Here is my thread:
http://discussions.apple.com/message.jspa?messageID=1707459#1707459
Cheers
Richard

When I make call I cannot hear the sound from the built in speaker. I need to switch on the loudspeaker or I have to plug in the headphone. What is the solution?

When I make call I cannot hear the sound from the built in speaker. I need to switch on the loudspeaker or I have to plug in the headphone. Due to this I cannot even use Siri, Voice message recorder or even Tom Cat applications. What is the solution?

http://support.apple.com/kb/TS1630

Is there a way to record sound from mac ????

using a mbp with snowleopard ... can I record mac output ?
Using microphone is ridicolus and let a lot of noise
Using soundflower I could not hear nothing while recording.
I nedd to hear and record sound outup from my mac like I did on windows... Is it possible without installing 3rd party software ?
And with 3rd softwares ?

I've tried both suggested software but I think I was not so clear.
I need to use sound from mac as an input while I could hear it.
I do not need a software that record sound from mac.
For example... if on windows i set input "wave out mix" instead of "microphone" I could use system sound as input... for example record a lot of error message's sound (PING!) with quicktime pro...
I would do the same thing with macosx...
I am surprised that such a simple thing could not be done with this OS but now I am looking for a 3rd party software that could solve this problem...
Both Audacity and Wiretap can record sound... but not let select me system sound as input.
I need to select system sound as input in order to record it (while I hear it) with every software I want to use... QT pro for example...
Is this so difficult?

Is there a way i can record sound from my computer?

i am trying to record sound from a dvd. can this be done using garage band or itunes?

I heartily agree with the use of the "WireTap" software--it records CD quality AIFF files (saves them as QuickTime) of any sound playing through your computer and is verrrrry easy to use. It used to be free (which is how I got it via versiontracker awhile back) but it is now available in a "pay" version. Free versions are readily available on old MacAddict software discs from a year or so ago. If you need that version, feel free to email me and I'll send you a spare.
Best,
Yusuf Lamont
G4 Dual 800 Quicksilver 1.5 GB RAM, SuperDrive Mac OS X (10.3.9) 3 HDs (80GB-system, 160GB scratch, 160GB media)

How can I silence the sounds from the Camera, "klick (camera" and "ping (video)"?

I need some help. How can I silence the sounds from the Camera, "klick" (camera) and "ping" (video)? Sometimes you'd like not to let others know that you're taking a picture/recording.

Recording sound from the PC

Similar Messages

Maybe you are looking for