Recording start delay - Too long to initiate recording i

Can anyone tell me why when I initiate record it is taking like 30 seconds or longer for the playhead to start moving and recording? I see the swirl processing forever the finally it will catch and start recording my audio. Very frustrating , what do I have set wrong ? I have adjusted the buffers and turned all the plug ins off.

Mark Heupel wrote:
Can anyone tell me why when I initiate record it is taking like 30 seconds or longer for the playhead to start moving and recording? I see the swirl processing forever the finally it will catch and start recording my audio. Very frustrating , what do I have set wrong ? I have adjusted the buffers and turned all the plug ins off.
I think the most common cause for this was using an external drive formatted FAT32. If you are using an external drive for recording audio, use Mac OS Extended with Journaling OFF.
pancenter-

Similar Messages

Trigger delay too long

I'm trying to make a 10ms trigger delay using a PCI-MIO-16E-4. However everytime I use it there seems to be a variable delay of about 50ms before my signal is outputted. Is there anyway to remove this extra delay?
Thanks

Although you are getting a longer delay than you are
wanting, this can be caused by a few things. One large factor in delay times
being slightly off are that, unless you are using a real-time system, your PC
is non-deterministic and will not guarantee your delay being exact and
occurring at the exact same time each iteration.
Another factor, partially building on the one above, is the
code you are running and how long it takes to execute. If you have a 10 ms ‘wiat ms.vi’, but your code takes
20ms, then the delay will be ignored because your code ran longer than the wait
timer. This
KB explains more about the wait functions.
David L.
Systems Engineering
National Instruments

Starting time too long, web-radio stations won't play in 2 FF11 versions...

The third time I saw that Firefox11 was available for d/l I did it. I'm using Puppy Linux 528 &, at the moment was using FF8.x. I was working ok.
After that I started to note the problems stated above, so d/l Chromium & have been using that as an alternative. I thought that as it has already happened before the problem was due to the fact that it was not a PET file (compiled specifically for PL).
About 2 days ago, I searched for the newest pet FF browser available & found that there was an 11 version already, so I d/l it. At installation time it asked me to remove (recommended) some histoy/bookmarks & I thought it was a good idea. After all, I have backups of my bookmarks almost updated. The same problems persisted...
Today, I decided to troubleshoot the issue but, when I opened it it responded normally, showing me the Play button in my web-radio station page & playing the stream without any flaw(util now).
I don't have a clue how it got fixed since I didn't enabled the update feature. Could it be an issue concerning the sites? Could that happen for a span of more than a week?
Thanks for any tips/info on the subject & thank you all for a very splendid project!

Yes, the startup time was reduced to a point where I guess it's now normal as expected. But, what about all the disabled plugins? Thanks for responding, Kadir Topa!
I don't think I've an alternative but to follow the recommendations given somewhere else in this site in relation to troubleshooting plugins..., I'll see what's the outcome of it & post the results below.

How can I download a 18 minute video I recorded from my iPad to either email or youtube or vimeo I keep getting the message the file is too long.

How can I transfer a 18 minute video I recorded on my iPad camera app to email/youtube or vimeo? I keep getting the message the file is too long do want to send clips?
Thanks

Youtube usually had an 8 minute length cap, which may be part of your issue. Also at 18 minutes that is probably a gig+ file size, which will also take a long time to upload and may be another part of the issue.
Edit it down as jim suggested. Or you may need to use something like dropbox, to get it off your ipad and onto a computer where might have more options to edit it down or size it down.
If it's just file size you can transcode it into a smaller file - a lower quality MP4 for example. If it's the length that's an issue for youtube, you'll need to break it up into a couple different files and upload part 1 and part 2

Recording starting too early and also ending too e...

Another problem.....
When recording programmes I am frequently finding that the recording is starting way too early...5-10 minutes....and often ends too early (very annoying as one misses the end of a particular programme).
Any help, gratefully received!
Thanks

Recording should start 2 minutes before the scheduled start time and end 5 minutes after the scheduled stop time (by default - you can increase this).
The box won't automatically cope with programmes which start late. Are the programmes you're having a problem with starting on time?
Is the time displayed on the box correct?

Manage data element UMBSZ in Material Record : Entry too long

Hello
I would like to manage alternatives units of measure with a Numerator defined in more than 5 digits, in the material master record (transactions MM01, MM02).
For example :
A material with a base unit of measure = ST (Items) : view Basic data 1 of the material master record
and the same material must be managed in Pallet : 1 Pallet = 150000 ST
So In additionnal data of the material master record we must assign 1 Pallet (fields UMREN + MEINH) for 150000 ST (fields UMREZ + MEINS)
but when i assign 150000 in the field UMREZ i have the error message
Entry too long (enter in the format __.___)
Message no. 00089
In fact The Field UMREZ is defined as DEC, Length = 5 and Decimal Places = 0
So what could be the Solution? Is it possible to managed this field with more than 5 digits? Is it possible to do something in the transaction CUNI?
Thank you for your answers
Best Regards
Manuel

Did you find a solution for this?

Data record too long to be imported (0 or 5000)

Dear Expert
in LSMW While display the read record this is the error comes
"Data record too long to be imported (0 or >5000)"
how to rectify this?
but system allows for further steps and upload the maser record
Regards
Karan

Hi,
Hope the same question is already answered in the thread: Error in uploading master through LSMW
Please check and revert back if its not solved.
Regards,
AKPT

Moving the 80 Million records from Conversion database to System Test database (Just for one transaction table) taking too long.

Hello Friends,
The background is I am working as conversion manager and we move the data from oracle to SQL Server using SSMA and then we will apply the conversion logic and then move the data to system test ,UAT and Production.
Scenario:
Moving the 80 Million records from Conversion database to System Test database (Just for one transaction table) taking too long. Both the databases are in the same server.
Questions are…
What is best option?
IF we use the SSIS it’s very slow and taking 17 hours (some time it use to stuck and won’t allow us to do any process).
I am using my own script (Stored procedure) and it’s taking only 1 hour 40 Min. I would like know is there any better process to speed up and why the SSIS is taking too long.
When we move the data using SSIS do they commit inside after particular count? (or) is the Microsoft is committing all the records together after writing into Transaction Log
Thanks
Karthikeyan Jothi

http://www.dfarber.com/computer-consulting-blog.aspx?filterby=Copy%20hundreds%20of%20millions%20records%20in%20ms%20sql
Processing
hundreds of millions records can be done in less than an hour.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Nawk message input record too long

I am running a shell script which uses nawk.
I am processing a huge input file.
I get a message that an input record is too long.
What am I supposed to do to indicate to nawk the max record line length ?
My e-mail is [email protected]
Any info will be appreciated

The 6144 limit can be verified with:
% perl -e 'print "A"x6145, "\n"' | nawk '{ print length($0); }'
nawk: input record `AAAAAAAAAAAAAAAAAAAA...' too long
source line number 1
(it works, when you change the perl print statment to
6144 x "A").
Quick solution could be to use gawk instead of nawk
(/opt/sfw/bin/gawk, if you have the Solaris 8 companion
CD installed).

I use my Ipad to record clients and I need to send these recordings to my customers. I am having trouble sending them because it always says that they are too long in length. They run any where from 5 minutes to maybe 15. Can I compress these

I use my Ipad to film my clients and need to send copies to my clients. I am having trouble sending them. When I press share, it only gives me options of sending them as a Message airdrop or Icloud. When I press Icloud nothing happens. The videos are usually 5minutes to maybe 20 minutes. I need to send them insome kind of a compressed manner so it iseasy for my clients to open and watch. Thanks

Have you thought about uploading them to youtube? You can put things there up to 8 minutes long, and up to 15 if you get verified. You can also have them 'unlisted' which means they're not visible to anyone without the link.
I think your issue isn't as much that the videos are too long, it's that the file size is too big. I have a 3 minute video that I shot with my iPod that's 300 megs, and most mail programs max out at 25 megs.
There may also be options with vimeo or other video sharing programs that you can explore.

Hello! Newbie with PROBLEMS! Audio recording majorly DELAYED?!?!?!?? help?

Hello there! I LOVED Logic 7, was very happy to get Logic 8. Then I installed Leopard. Now Logic is F'ed up. At first I had the Coremidiserver not responding issue. I deleted those MIDI drivers as well as Reason and my Melodyne rewire and bridge plugins. But when I want to do an Audio recording, Logic freezes, I get the rainbow death wheel for 60 seconds, and THEN it starts recording. It is really bad for creativity to have to wait to get the audio track to record. Does anyone know what could be going on or how I can fix it? I am using an Mbox2. I have the Line6 Toneport, but that is not working although it works for my boyfriend who has the same computer, logic 8 and leopard. I'm confused!!! what should i do? Can genius bar help me? Sorry for sounding neurotic, I'm just really anxious to make music an d not have all these technical issues! Thank you VERY VERY much for any advice.

Are you recording to a macBook Pro internal hard drive? or to an external drive?
How much memory do you have?. The delay of 60 sec before recording is not normal. Your computer is checking something else, or is forced to do another task before executing the command of recording
logic 8 need a lot of memory the absolute minimum is 1 GB of Ram but 2 GB or more is highly recommended.
best of luck
Eric D

How long long will iPad record for?

Hi, does anyone know how long my iPad 2 will record for if I just leave it recording without touching it for a while? Think its 16gb with very little used up.
If I explain why..... I have to park my car on the street and its been vandalised more than once this week, I want to put the iPad in the window recording it in the hope I'll catch someone in the act. Obviously a little worried a. The capacity might mean it stops recording after a short period of time or b. the iPad hibernates if left on for too long.
Thanks

Recovery Mode Step by Step
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
On Computer
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. iPad Recovery Mode on computer screen
8. Select "Restore iPad"...
9. Select "Restore and Update"
10. Extracting Software.
11. Preparing iPad for restore.
12. Waiting for iPad.
13. Verifying iPad restore...
14.Restoring iPad software.
15. Verifying iPad software.
16. Verifying iPad Restore...
17. Restoring iPad firmware...
18. Your iPad is restored to factory settings; keep iPad connected to computer
19. Activate iPad
20. Enter Apple ID and Password
21. Continue
22. Welcome to Your New iPad
(a) Set up as new iPad (b) Restore from this backup (select from list of backups)
23. Restore from this backup
24. Continue
25. Restoring iPad from backup
26. The settings of your iPad have been restore; keep iPad connected to computer
27. Syncing iPad (Step 1 to 5)
28. Preparing apps to sync
29. Copying 1 of 9
30. Sync apps, movies and music to iPad
31. Finishing syncing
32. Eject iPad

How long I can record a voice memo in my iphone 5s, how long I can record a voice memo in my iphone 5s

how long I can record a voice memo in my iphone 5s, how long I can record a voice memo in my iphone 5s

Thanks Caramby. I actually found another work-around
Here's how to copy the voice memo to your laptop (and then email it if you need to):
With iTunes open on the Voice Memo folder of your device (an iPhone 4s in my case), simply drag the required file from iTunes and onto the desktop of your pc/laptop. It won't remove the file from your device but simply make a copy. Then you can play the file from your pc/laptop (through Quicktime) as the file is in AAC format. You can also attach the file to an email for sending.
Hope this helps someone else.
RB

I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop. I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop. How do I do this?

I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop (which I no longer have). I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop.
How do I do this?
(when I click on the Sync option I get the warning: "Are you sure you want to sync music? All existing songs and playlists on the iPhone will be replaced with songs and playlists from your iTunes library." I fear that if I click this I will lose all of my important Voice Memos as well)

Just to add to what ChrisJ4203 said. You can sync them to your new computer using iTunes by selecting to Include Voice Memos on the Music tab of your iTunes sync settings and syncing. However, you still need to re-establish syncing with the new computer without iTunes erasing all the iTunes media from your phone (as the warning mentioned).
If you copy your entire iTunes folder (not just your music) from your old computer to your new one, along with other non-iTunes media you may be syncing with iTunes (such as contacts, calendars and any photos synced to your phone from your old computer) by using migration assistant of following one of these methods: http://support.apple.com/kb/HT4527, then when you sync again with your new computer it will recognize your phone and sync as it did before. You will still have to authorize the new computer for any Apple IDs used to purchase from the iTunes and App stores (in iTunes>Store>Authorize this computer).
After that you can sync your voice memos to your computer as mentioned earlier.
If you want to archive your voice memos before you do anything with iTunes, you can use a 3rd party program such as PhoneView or Touch Copy.

Iphone 3gs will no longer play my recorded video's

i downloaded just dance autodance app onto my iphone and everything was fine and normal now all of a sudden my recorded video's no longer play but still play the sound to it the just dance app works fine on my boyfriends iphone, i have tried removing it and re-installing it but its still the same, can anyone help please x

These are the symptoms of a loose or detached Flex Cable # 6 at the top of the Logic Board.

Recording start delay - Too long to initiate recording i

Similar Messages

Maybe you are looking for