Recording stereo audio and only getting one side - what gives?

Recording audio in stereo mode in logic and only getting one side showing on the meter and same side showing on the audio file - I've checked the interface - is there a logic setting I'm missing?

Is Universal Track Mode enabled?

Similar Messages

  • My iPhone 5 only charges with my lightning port cable and only on one side. I've tried buying a new cable but that doesn't work.

    My iPhone 5 only charges with my lightning port cable and only on one side. I've tried buying a new cable but that doesn't work.

    Since there's no one side on a lightning cable, make an appointment with genius bar for an evaluation.

  • Is there a way in iTunes to separate the stereo tracks and play just one side?

    Files that I have can be played so that you hear one of the two stereo tracks of a song. So far I have not been able to figure out a way to do this in iTunes. Does anyone know how to do this? Is this a lost cause?

    It's a lost cause.
    I sould add that Quicktime has a left/ right control.
    Window>>Show AV control.

  • Logic won't let me record stereo style! Only the left channel.

    I was recording just fine with my keyboard connected to my TASCAM US-122 USB interface with an instrument cable today then all of the sudden I could only hear the keyboard in the left side of my headphones. I tried the other line-in and then I could only hear myself on the right side. What went wrong here? Keep in mind, it was working just fine but in between takes it cuts one side out. And all of my pan adjustments are equal.

    If you are using a single, jack to jack cable you are effectively recording in mono, on one channel. When you are monitoring your recording signal you will only hear one side because your tascam is only sending it to one logic channel...
    Your tascam has a mono direct monitoring switch - you should switch it on when recording with only one jack to jack cable - it will allow you to monitor directly through the interface whilst hearing your sound on both sides. You should record to a mono logic track and you will then be able to pan it afterwards as desired.
    For a true stereo keyboard recording you would need to connect two jack to jack cables from your keyboard (if it has left and right outputs) into two separate mono channels on your interface. You could then record to a stereo track on logic, or two separate mono tracks panned hard left and right.
    I may be wrong, but I reckon your problem stems from not properly understanding how the stereo field corresponds to recording channels.

  • Hi I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

    I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

    What device?
    What format?
    How are you importing it?
    Can you find the external audio with Finder?
    Where is your destination file when you import it?
    Andy

  • Only getting one channel of audio with mic HELP

    I had been using Garageband with the built in mic to do my podcasts. I just got some real gear.
    Here is what I got... M Audio USB fast track, MXL V63MBP running on 10.3.9
    I am only getting one channel of audio through the mic. I have the settings on the mixer right and I have gone in the sound preferences and made sure it was right.
    On the track in garageband, I made sure that the real instrument settings were set to Stereo. I have been messing around with this thing for an HOUR and I am still only getting one channel of audio. I've done everything I've been able to come up with in google and still nothing works. If anyone has any ideas ,that would be swell because I'm beginning to think that the crappy built in mic on my mac is looking really good about now.

    You're welcome.
    The common confusion is that 'Stereo" means two speakers and "mono" means one. Stereo actually means two different signals going to the two speakers. Since a Mic is a mono input device, you set the track to mono so that the same sound comes out of both speakers. Enjoy --Hang

  • How do I get my printer to print only on one side of the paper?

    I want to print only on one side of the papger.  But machine prints out on both sides.  When I remove the duplexer at back of machine, the paper flies out the back and printing error says no paper.  I'm going nuts.   I am a writer and can only submit material on one side of the paper.   I just got this machine and hate that it has no manual and the manual on line is beyond me.  I need simple easy to understand instructions for my simple brain. thanks

    Hi,
    Follow these steps to disable two sided printing:
    Open the file you would like to print. From the File menu select Print. The Print window appears.
    NOTE: The Print window might be minimized. Click the Show Details button to see all available settings.
    Click the settings drop down, it will usually appear as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.
    Select Layout from the drop-down menu.
    Set the Two-Sided option as Off.
    You may save the settings as a preset by clicking Presets > Save Current Settings as Preset...
    By doing so and completing the print job these settings will remain default till another preset will be used in the future.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I am using elements 10 and only getting audio not video.  Can anyone please explain why? I am a total newbie to video.

    I am using elements 10 and only getting audio not video.  Can anyone please explain why? I am a total newbie to video.

    greenfrogstone
    Just saw your thread, and it looked like a candidate for the Premiere Elements 10 NVIDIA GeForce Roll Back the Driver issue. If your computer uses a NVIDIA GeForce video card/graphics card, then the following applies to you. You do not want to update the driver. Rather you want to roll back the driver version, probably to about May 2013. For your convenience I have done a copy/paste of the forum announcement which gives all the details and fix of the matter.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    This matter has been very specific to the Premiere Elements 10 NVIDIA GeForce card user. So, if your computer is using other than a NVIDIA GeForce card, it is likely that the message does not apply to you, and we can then explore other troubleshooting possibities.
    Looking forward to your follow up. Do not hesitate to ask for clarification on anything written here.
    Thanks.
    ATR

  • Mt iPhoto library has disappeared from my laptop after syncing my new iPhone with the laptop. I now have a new iPhoto library with no photos. I have tried pressing option when opening iPhoto but I only get one library option and can't find my old one

    My iPhone4s was recently replaced by apple due to grey out on wifi. when I went to sync with my laptop my iPhoto library disapeared and I was left with an empty library. I cannot find my old library on my laptop. I only get one option for a library when i open iPhoto while holding down option key. I am worried I have lost all my photos. there seems ot be no iPhoto library on my iCloud either.
    Any suggestions?

    Syncing with an iPhone should not delete the iPhoto library on your mac. It only will upload photos to the phone (iTunes sync) or import (connecting by USB). How did you sync your phone?
    TD, do you know of any way, that a sync could delete an iPhoto Library on a Mac?
    You may have opened a wrong library or may be working from a different user account. Are you using the same user name and Apple ID as before?
    How have you searched for iPhoto libraries? Have you searched with Spotlight?
    Each iPhoto library contains a file called "Library6.iPhoto" - even if your iPhoto library should no longer be recognisable as photolibrary, this file should be found:
    Type "Library6" into the "Spotlight" search field in the upper right corner of your screen, like this:
    When you see a list of files, select one of them and hold down the key combination ⌥⌘ to reveal the path to the file.
    If Spotlight cannot find the file in the packages, use "FindAnyFile"  http://apps.tempel.org/FindAnyFile
    Regards
    Léonie

  • I signed up for 20 bucks a month to use photoshop and only got one day of use.  Where does that get

    I signed up for 20 bucks a month and only got one day of use of Photoshop.  Where does that get off?

    What error are you receiving?  Do you have a subscription to Photoshop CS6?

  • When using bbbc I player the screen goes black after 30 secs and only get audio. I have latest version of the app and also tried via web browser. Any advice it is so frustrating

    When using bbbc I player the screen goes black after 30 secs and only get audio. I have latest version of the app and also tried via web browser. Any advice it is so frustrating

    Is this an app bbbc?  IF it is I would contact the app developer and see if they can resolve the issue for you.
    also take a look at the reviews and see if other users are having the same issue and see if they have a resolution.

  • When creating a PDF from the scanner, it only scans one side despite the settings.

    When creating a PDF from the scanner, it only scans one side. I am using a fi-7160 that supports scanning both sides at once. The Scanner software is configured to scan both sides, and so are the presets in Adobe Acrobat Pro. I've only gotten the setting to work with the Custom Scan setting. Has anyone else had this problem, and what is the solution?
    Additionally, the software bundled with the scanner with automatically omit the back sides of a page if it is blank. I am scanning large files with occasional double sided pages. Is there a way to avoid having to manually delete blank pages when creating a new PDF from the scanner? It takes twice as long because I'm using the OCR stabilization.

    Hi anne,
    Could you please let me know what Acrobat and OS version are you using.
    Does this happen in case of any particular PDF or all PDF files?
    Try repairing Acrobat and then again check.
    Hope to get your response.
    Regards,
    Anubha

  • Does the iphone 3GS record stereo audio?

    Does the iphone 3GS record stereo audio? or is there a way to record the audio in stereo

    The iPhone is not capable of recording stereo audio, stock. There is only one microphone.
    See my post above for what you need.

  • Why only gets one node when select many nodes of tree in DWCS4 on Mac OS

    I use tag <mm:treecontrol> to create tree in DWCS4 on Mac OS.
    When I select many nodes in tree, but I only get one node by method: selectedNodes.
    codes of created tree as following:
    <mm:treecontrol name='tree' size='20' multiple noheaders>
         <mm:treecolumn state='hidden'>
              <mm:treenode value='A' state='expanded'></mm:treenode>
              <mm:treenode value='B' state='expanded'></mm:treenode>
              <mm:treenode value='C' state='expanded'></mm:treenode>
    </mm:treecontrol>
    Who can  tell me reasons?
    Thanks!
    comments: if don't use tag <mm:treecolumn>, tree will not show on Mac OS.

    Hi macbig,
    I finally got to look at my sister's computer. The HDD "Repair Disk" found missing threads, missing directory records, etc. and ended with:
    Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-
    up files.
    Then, I tried "Verify Disk" and it found invalid volume file count and ended with:
    The volume Macintosh HD was found corrupted and needs to be repaired.
    Error: This disk needs to be repaired. Click Repair Disk
    I guess running Apple Hardware Test is not going to happen. :/
    I've ordered online a new 2.5 disk, make a Maverick boot USB, and start from scratch. Do you have any other suggestions?
    As for the corrupted old hard drive, do you have any suggestions of how to get out the data somehow?
    Thank you so much!

  • Why do my audio and video get out of synch?

    No matter what sort of video I'm trying to play: Youtube, a movie on DVD, a movie on an external hard drive, etc, after a short time the audio and video get out of synch with each other.  This is often, though not always, signaled by a short audio phrase being repeated (eg: "I don't know, Scully, how about you? about you?").  I can solve the problem by quitting the app and starting it back up but it will eventually screw up again.
    I'm using a MacBook running OS 10.6.8 with a 2.26 GHz Intel Core 2 Duo processor and 4 GB 1067 MHz DDR3 memory.

    MASMAS
    The first thing that we need to know are the properties of what you are putting on the Timeline. What works in another software does not necessarily work in Premiere Elements. Each program has its own supported formats.
    a. What is the file extension for this file? .MOV or .MP4?
    b. Does the iPad describe it as 1080p or 720p?
    c. If you open Premiere Elements 12 and go to Edit Menu/Project Settings/General, what do you see for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio, even if those field appear to be grayed out.
    Two immediate troubleshooting avenues are going to be in the direction of...
    a. Project settings not set up to match the properties of the source from the iPad. Then we would start a new project and set the project setting manually before importing your video. Details for manually setting the project preset are in the following.
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    b. The iPad video being recorded with a variable frame rate instead of a constant one...the remedy then would probably be to take your video in a program like HandBrake to change the variable to a constant frame rate. And after that, import the corrected video into the Premiere Elements project which has the correct project preset (preferably set manual to assure the correct result).
    Please see what you can put together in the way of video details, and we will sort this out.
    Thanks.
    ATR

Maybe you are looking for