Recording stops when alt-tab to another program (win7 64 bit)

I recently upgraded to Audition 3.0 so I could use Audition on my new Win7 64 bit setup.
Everything seems to work pretty good except..........
While recording, if I leave the Audition program (for instance, to use my browser while making a recording) recording immediately stops.
Has anyone else run into this?
Is there a setting someplace that I've overlooked?
I'm sure this is not the way it should work - Win XP & Audition 1.1 worked fine while multitasking.
Suggestion much appreciated. Thanks in advance.

Edit->Audio Hardware Setup
Uncheck 'Release ASIO Driver in Background'

Similar Messages

Very frequently I am unable to click on anything within the brower, I need to alt-tab to another program or minimize firefox in order to click on any links. This is only within firefox and no other program or browser that I have having this problem.

Very frequently I cannot click on any links within firefox. I have to either alt-tab or minimize the browser in order for me to navigate through website.
This appears to be only issue with firefox and nothing else on my computer as I don't have this problem with any other program or web broswer.
I needed to alt tab 5 times just to get this question submitted, very annoying!

That problem can be caused by the Yahoo! Toolbar or the Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

When alt + tab between applications firefox freezes to a black blank screen and will not move. The only response it will allow is the close option after right clicking on the task bar in English

I normally have several applications running at the same time, some of them are running 24/7/365.
When accessing the applications its easier to alt+tab between them. On the occasions that I can actually get Firefox to open and stay open it always freezes and remains immovable on the screen after switching to another program.
Firefox goes black except for the border and the close button at the top right. The other buttons disappear. Even after waiting for a period of time it does not clear.
The freeze can occur either on the first switch or second switch. However, it always happens.

Have also since found out that to start FF4 in safe mode you just hold shift whilst double-clicking the icon. We only find these things out after the event, murphy's law!

Repeated Delays when Alt-Tabbing Back to Premiere Pro CS4

I'm experiencing a lengthy delay every time I switch away from Premiere Pro CS4 to another app and then switch back. Every time I Alt-tab back I get the hourglass cursor for 35 sec. Then, it goes through a generating peak file phase for each of the clips in the project. This goes more quickly, maybe 5-15 sec. But it does this EVERY SINGLE TIME I return to PP from another app.
This is on a newly built Windows XP 64 system based on the brand new Core i7 940 with 12 GB of RAM and four 500 GB+ hard disks. I've set the two media caches to each be on different disks. The system disk is a third disk and the project is on the fourth disk. There's no way this system should be slow with this material. The project is a lynda.com beginner's tutorial; we're talking half a dozen 15-second sequences.
How can I stop PP from going through this lengthy delay each and every time I switch back to it?
David Salahi

>brand new Core i7 940

Recording stopping when changing windows

I do the occasional podcast for my friend's site, and a friend gave me his copy of Audition to try, as he swore by it.
Now, I've not had any problems as such so far, but for one annoying thing. I make notes on what I'm going to say in notepad, and when I clicked out of the Audition window and into Notepad, the recording stopped. Same thing happens if I click out the window at all.
Is there a way to have the program keep recording even if the window isn't on top, as they say, or do I have to tell my friend "Thanks, but it's not for me"...

Edit>Audio Hardware Setup, and take the check out of the 'Release ASIO Driver in Background' box.

Pressing alt+tab to change program or pressing tab to move to next entry cell in a web page is causing Firefox to open a new tab

A new tab is being opened in Firefox (started only today) when I do any of the following
1. pressing alt+tab when in Firefox
2. pressing tab to change data entry cell in a web page
3. pressing direction keys (any of up - down - left - right)

Upgrade Firefox to Firefox 13 (released today) and then try to Reset Firefox. This will fix most problems with Firefox that people experience. [[Reset Firefox – easily fix most problems]]

Why does my recording stop when I navigate away from AA3?

I noticed recently that when I navigate away from AA3, my recording stops. This is extremely inconvenient. How do I fix it?

Well, the first thing to do is go to Edit/Audio Hardware Setup and make sure the box beside "Release ASIO Driver in Background" is NOT ticked.
However, when using ASIO drivers remember that you can't have mutliple pieces of software trying to use the driver at the same time. This is a restriction of ASIO itself and not an Audition restriction.
Bob

Recording stops when headphones are unplugged

I'm the FOH guy at my church, and I typically record the stereo output from the console for archival purposes. I'm using Audition CS6 on my Macbook Pro running Lion 10.7.5.
I'm recording the stereo track in edit (waveform) mode with headphones plugged into the MBP's built-in headphone port to monitor the recording. When I unplug my headphones, the recording automatically stops.
A quick check of the preferences didn't show me anything, so I'm wondering if anybody else knows of a solution to this?
Thanks!

My Lenovo laptop would do the same...it appears to send a message that the audio devices have changed when the computer switches from speaker to headphone or back.
One cure I know (but which might not be popular) is to forget using the rubbish in-built sound card in your Mac or PC and get an external USB (or Firewire or Thunderbold but USB is cheapest) audio interface. Even the cheapest, nastiest external interface will sound tons better than the built in and also eliminate sillyness like this.
That said, I just tried something on my built in Realtek sound destroyer and may have a suggestion. When I plug or unplug the headphones, I get a warning saying that the list of sound devices has changed and do I want to re-set my preferences. There's a tick box on that that says "Don't show me this message again" and, after ticking the next trial recording kept going as I plugged and unplugged my headphones multiple times.
I have no idea if this would help on other computer/soundcard combinations (and have even less idea about Macs) but, if you see that message, it's worth a try.

Audio stream stops when I switch to another tab in Safari

I've got this radio station website which links to a live stream so you can hear the station online. It worked fine a couple of weeks ago, on my Powerbook G4 running 10.4.9. Then my Powerbook died.
Enter my new MacBook Pro, still running 10.4.9. I try to listen to the same station, but everytime I start the stream, then switch to another tab to browse the internet, the audio stream stops.
BTW, the audio stream behaves properly when I use Firefox. Is there a reason why Safari can't keep on playing the audio stream when it's not in the active tab? Or have I got a bad configuration?
Many thanks, as always.

Nah, forget it; I just remembered what really used to happen (which still happens):
I used to open a new Safari window (not a new tab), open the radio stream in that new window, then switch to my previous Safari window with all my tabs. Then it works.
For some reason, I don't have to do this (i.e. open two different windows as opposed to two tabs) in Firefox.
I really like and prefer Safari to most browsers, but I have to admit, it's rather flaky in a number of ways. This is one of them.

Playback pauses when tabbing to another program

Is there any way to disable this feature? I need it to keep playing regardless of what program I'm using.
Right now placyback halts if I click anywhere out of the program.

I didn't know it was already released.
So it can be disabled in CS6? In what menu and what's the option named?

Violin Recording in Garage Band 3 (or another program?)

I'm a recent convert from PC user to Mac lover. Would it be possible for someone to tell me a good set up for recording? I do not own my own pre-amp or microphone so I will need to plan on purchasing these. I'm not yet sure of how much money I'll be able to spend, but I could use a good nudge in the right direction so I can at least know what to look for.
In the past I had been using an Alienware 51m with a Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA card where I was connecting the cable to the optical in port. Since I had only one line in to the card I used a Y cable to connect to the pre-amp to the sound card. Then I had the mic set up on a stand somewhat near the area I would be playing. When I had been recording I had been just using Creative Mediasource.
My main concern in finding a way to duplicate this setup on my Mac is two-fold. I need to have a setup that allows a wide range of dynamics and pitches and can accurately capture tone quality. Nearly everything I will be recording will be Classical music (pre-Bach through contemporary). Another concern I face is that I am not allowed to edit recordings in any way. So I need to have a program that focuses on recording vs. editing.
As I've been looking through the forums here I've noticed that Garage Band 3 only records 16 bit sound, is there a better alternative for me to use? When I was doing this on PC I was able to record in 24 bit because of the soundcard I was using.
Any suggestions or nudges would be greatly appreciated. Thank you in advance.
15.4" MacBook Pro 2.16GHz Mac OS X (10.4.6) 1GB of RAM

The best thing about grareband is the ability to do great sounding multitrack recording with the least amount of learning curve and a super simple user interface, oh and the price. For almost any recording from podcast to writing songs, recording demos and recording online or mp3 music GB does the job nicely. If your recording sound that need the best possible quality and control then you may want to look into logic or Logic Express. Especially if you plan to make a living at this.
Now you may find GB to be all you need but only you can decide this. As for getting high quality sound into your computer you will need a usb or firewire interface. So for some to help you we need to know how many tracks you will be recording at a time and a ballpark figure of what you would like to spend.

Premiere stops when opening tab "Adobe Media Encoder"

Working with Premiere CS3
When I want to export movie to flv, I open File-> Export-> Adobe Media Encoder
Then I have to select, but since a few days when I click the Adobe Media Encoder button, Premiere stops and is out of service.
When I start up Premiere again, it repeats.
Yesterday I've downloaded Quicktime (of a CD which needed it for playing).
But after uninstall Quicktime, the problem is still there.
So I've set back the date to Wednesday (two days ago) but nothing will help.
How can I solve this problem?

More information would be very useful. This ARTICLE will give you tips on what types of info are needed, and how to gather some of it.
Good luck,
Hunt

Recording stops when I turn the box on.

Help! Am I the only person suffering this problem? Got my BT Vision box in December and generally happy apart from this really annoying problem. Before going out yesterday morning I set the box to record 4 consecutive Sky Sports 1 programmes, ending with the 2 live Sunday matches.
Came home at 12.50 and turned the BT box on to watch the first of the 4 programmes. Recording had finished and was fine. Turned the box on again at 16.50 to watch the Liverpool v Man Utd game. Recording had started at about 12.30 and finished at 15.30 but all that had actually recorded was the first 20 minutes (i.e. the period before I had turned the box on at 12.50). I then checked the recording in progress (the second match) to find a blank screen: nothing actually recorded. I switched to live tv - channel 41 (Sky Sports) - and as usual when the problem occurs, the screen was blank. The only way I could restore 41 was to switch the box off and on again. The problem isn't unique to channel 41, it happens with BBC channels as well.
I know there have been lots of posts here about programmes not recording fully but has anyone else encountered the problem caused by switching the box on and using it whilst it's recording?

That happened to me once back in January. When the box came on the screen of the channel it came on at was blank and the recording in progress went blank at the moment the box was turned on. Other users reported similar. It was cured by a reboot of the box and hasn't ocurred since. Some users reported that pressing the standby button on the front for the box for 10 seconds was enough, but others reported that they needed to unplug, count to 30 and then put the plug back in again for it to clear the issue.

I can no longer see my task bar when I am in another program. How do I get it back?

Lost the menu bar too, but I fixed that. Still do not know how I did it. I want my task bar back so I can adjust volume and see the time. Only time i see it now is when I am on the desktop and all icons are showing.

As you can see from a brand-new virgin install of Firefox, no addons, no pre-existing profile, version 29 DOES put the menu bar on the taskbar. And Firefox, configured as I have it, on a system configured with High-Contrast colors (black in my case) turned on, Firefox is unthemeable.
But never mind, I solver this one myself. I booted into XP and used an un-updated Firefox to find a new addon named "Classic Theme Restorer". That did the trick. Mark this one as solved. But....
I wish developers (not just Firefox) who wish to fancy up their user interfaces would think about how it would affect the visually impaired. We use computers too.

How do I change the default email to hotmail? There is no "webmail" optioin in applications and no program available when I select "choose another program" when I follow the instructions.

I want to change my default email to hotmail (currently it goes to Outlook, which I don't use). Firefox instructions say to choose "webmail" in applications, but when I do, the only webmail account that shows up is gmail, which I don't use. The other option in the instructions says to select "use other" and then "browse", but again, when I open the browse file, there is nothing there for hotmail. How do I add hotmail to become the default?
Thanks

Setting Hotmail as the (default) mail provider involves doing some steps.
See:
*[[/questions/871548]]
Set the pref gecko.handlerService.allowRegisterFromDifferentHost to true on the about:config page. 
In Firefox 6+ you can no longer run JavaScript code via the location bar. 
You can run the JavaScript code in the "Firefox/Tools > Web Developer > Scratchpad" (Shift + F4). 
Paste the full JavaScript code in the code window and run the code via "Execute > Run" 
Do not forget to reset the pref gecko.handlerService.allowRegisterFromDifferentHost to false after you have added that mail provider.

Recording stops when alt-tab to another program (win7 64 bit)

Similar Messages

Maybe you are looking for