Recording the played audio

How do I record my play back onto a new track, ie recording all the drums to one track.
I have a loop playing and I want to record the loop onto another track so I can use it in the song.
Anyone know how to do that?
Thanks,

Logic 9: Bounce in place
Logic 8: Either Bus recording - assign the Software Instrument to a Bus and use that Bus as an Inut for a new Audio track - then record in realtime. Or bounce the loop and reimport it onto an Audio track.
Logic 7:Bounce and reimport

Similar Messages

  • Recording and playing Audio at the same time

    Hi,
    Having problem with a MMAPI imp.
    The simplest way of doing it is to start one thread playing a audio file of any kind.. As it is playing start a other thread that start a audio recording.
    As soon as the audio recording is allowed to record (Security promt) the audio playback stops. And the playerListstner sends a END_OF_MEDIA event.
    So my question is: Is there a way of doing playback and recording at the same time or is this a limit on the phone or the MMAPI?
    This has been tested on Nokia N90 and SE W550i with same reults
    Cheers
    Kenth

    i also desperately need to record and play audio at the same time.. i have a term project, i am develeoping a karaoke player in j2me and it is supposed to capture the voice at the same time background song is played.. and it is also supposed to grade the singer according to the pitch of voice.. please help me about recording and playing audio at the same time...

  • Recording and playing audio files

    hi, is there a way by which one can record and play an audio file in java ?? I am doing a project in Voip but I can't find any help in this matter(actually i am a newbie in java ) .. can anyone please tell me how to proceed?
    Edited by: streetfi8er on Jun 28, 2009 2:47 AM

    >
    hi, is there a way by which one can record and play an audio file in java ?? I am doing a project in Voip but I can't find any help in this matter(actually i am a newbie in java ) .. can anyone please tell me how to proceed?>You could not find anything on ['java audio'|http://lmgtfy.com/?q=java+audio]? Where did you look, underneath the bed and in the back yard?
    Note that you might help dispel my impression that you are lazy, by applying the shift key once at the start of each sentence.

  • Recording The Sound/Audio

    When I use iMovie 09 to make a video it doesn't record the sound and i know for a fact the built in microphone works. What do I need to do to enable it to record the sound again while I'm recording my videos?

    Hi Life93,
    What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
    See this thread on how to remove the audio from a clip in iMovie -
    Is there a way to separate audio from a video c...
    https://discussions.apple.com/thread/1779767
    To add audio from GarageBand use this article -
    iMovie '11: Add a sound clip to your project
    http://support.apple.com/kb/PH2255
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Please help me with recording and playing audio simultaneously!!!

    Right now I can either play the incoming stream OR record it. I tried making Clones for datasource like :
    DataSource clone1 = Manager.createCloneableDataSource(originalSource);
    Then I pass it to these 2 classes:
    new playThread(clone1).run;
    new recordThread(clone1).run;
    playThread is a Thread class that will take the cloned datasource and then plays it while recordThread will record the incoming datasource. Here is what happens when i run them one after another:
    When I run playThread before recordThread I get ACM driver error. But if I run the recordThread before playThread the playThread's playerWindow shows up and plays for a split second then stops; The recordThread does record all the incoming stream though... Here are my questions....
    1. Anyone know what my problem is? is it resource alocation? Threading problem?
    2. Did I use the clone datasource correctly? I tried making clone1, clone2 but those didnt work well either...Should I do anything to the clones for record and play? all I did was pass them to the 2 classes and those classes just use them straight out without proccessing or anything...
    Please help me out!!!! thanks a bunch!

    i dont think it is... i tried the clone thing but samething happened... it might be a Thread problem since when i put those together sometimes record runs sometimes player runs... and at the end i get "ERROR while querying ACM driver's information" error..... i am really confused...
    DataSource clone1 = Manager.createCloneableDataSource(originalSource);
    DataSource clone2 = Manager.createCloneableDataSource(clone1);
    playerThread play= new playerThread(clone1);
    recordThread record= new recordThread(clone2);
    record.start();
    broad.start();
    anyone can help is appreciated

  • Audio breaks with the "play audio" action

    I have a slide with 3 buttons that trigger 3 seperate .mp3-files from the Library
    I just use the action play audio (name of file)..
    This happens in the preview as in in the published content as well.

    Could you please explain what you mean by Breaks and post a picture of your timeline?

  • Recorded Meeting plays audio from connect url but offline does not

    Hello,
    I recorded my meeting using audio from telephone conference (which is a nice new feature for 7.5 if not using one of the supported phone conferencing systems).  When I play the recording from the adobe connect site URL (or choose edit) the audio plays.  When I do a "make offline" it creates the presentation only with no audio.  Is this a limitation that I did not read about or am I doing something wrong?
    thank you

    use this code "Component control = player.getVisualComponent(); "
    instead of this code " Component control = player.getControlPanelComponent();"
    But if you want show both of them, modify as following
    Component control1 = player.getControlPanelComponent();
    Component control2 = player.getVisualComponent();
    then add the two control (control1 & control2 ) to your JFrame panel

  • When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?

    When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?

    When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?
    You have two basic options. One is to use a commercial screen recording app with access to system audio built into the app and the other is to add a system extension like SoundFlower that allows the QT X screen recorder to access/record the system audio. I use the former so I am not that familiar with SoundFlower but there should be several posts to this forum covering this topic.

  • Recording through the Mac Audio Tracks rather than through the Mic.

    I figured this would be very handy since I'm just recording the sound from a YouTube video, I don't want to have to use the mic to record the sound, If it's possible to save the Mac Audio Tracks, which is basically anything that comes out of the speaker, to a file to be used by Garageband later? Or is there a way to record, not through the mic, but using the Mac Audio Track through Garageband? It would help because I realized when I recorded through the mic that I had to worry about everyone around me being quite for a few seconds only to realize that the fan was running full boar which made the quality terrible. Just looking for an alternative. Maybe a program that records the Mac Audio Tracks? Sorry for the long-winded post.

    I know a way around this as I had the same problem once. I bought a small lead with stereo mini jack to stereo mini jack which enabled me to connect the headphones socket to the line/mic in socket. This means that any sound your computer makes can be recorded directly using any recording application, including Garageband. No fear of extraneous noise as it is a direct connection not microphone. There may well be a purely 'software' method also but I can confirm that this does work anyway.

  • Recording Video and Audio at Same time with simultaneous sync

    I want to record a keyboard performance into garageband and at the same time record the playing of that performance with my video camera. Then I want to create a movie using the music from garageband and the video from the camera. I was thinking that if I can sync the video and audio when I'm recording the session, then that part is taken care of. Or, maybe this is easier than I think it is?
    Is there a way to do this so that I can use the garageband record performance and have it synced to the video on the camera?
    I don't want to use the audio from the video camera because the performance that is captured in Garageband will be much better and I can do editing of the individual notes in GB.
    In the end, I just want to make a movie and/or podcast of the performance.
    I'm a newbie regarding this, but I did search the forums and couldn't find anything specific. Mostly it was about importing video into GB3 and then syncing new audio. I'll basically have audio and video from the same performance in two separate locations and I want to bring them together perfectly in Garageband.
    Thanks for any help you can provide.
    Powerbook G4 - DVI   Mac OS X (10.4.9)  

    Okay. I got the video and audio all together. I told you I'd link to it when it was up.
    http://www.youtube.com/watch?v=FxssYpUNJm8
    There's also a copy of it at http://www.myspace.com/bonjimmy/
    And as a quick side comment, even though I uploaded the same video to both YouTube and MySpace, the MySpace version is much better. YouTube must do something to the video after it's uploaded.
    What I learned doing this project:
    I recorded the video first (which gave me the sequencing of the piano performance) and then I dubbed the audio in later. However, there wasn't a good way to sync the video and the prerecorded piano, so there are some spots where the dubbed audio vocal isn't accurate to the video. I'm not sure what the pros do for this. I was hoping I'd remember how I sang for the video but when a couple weeks go by before re-doing the audio, it's about impossible. I tried, though.
    I remember working with an old 4-track and smpte to a sequencer a long time ago. With the way it is now, it's pretty cool that you can record digitally and mix and match and everything falls together perfectly as long as you have a place to match the video and the audio. It's pretty cool.
    What else???
    Does anyone have suggestions that would have made it better? Also, if you have suggestions on my performance or whatever, I'd love comments, but you can do that on the linked page.
    Thanks again for all your help. (The point of the video is because I'm thinking about getting back out there and doing some more playing... I'm looking for a band or something else interesting...)
    Powerbook G4 - DVI   Mac OS X (10.4.10)  

  • Play audio action doesn't work in Captivate 7

    Hi,
    On the first slide of my course I added a "quick start" guide. It consists of a series of captions containing text. In each caption there's a "Continue" text link triggering an advanced action to hide the current caption and show the next one. This works perfectly.
    Now I wanted to attach audio to each step of the guide. I added a "play audio" action after the show/hide actions for the first step. No audio was playing. When I changed the play audio to be the first action in the script - the script didn't work at all. When I changed it to be between the hide and show, the hide worked and show didn't. What I understand from this is that play audio doesn't work and also halts the whole thing.
    Any advice?
    Thanks

    Just checked it out, created a shared action with almost exactly the same commands, but grouped all the text containers in one group Gr_TC
    to hide:
    It worked perfectly. You don't see a label, because it is a shared action, for which I just filled in some parameters. Attached it to three buttons, had 3 text containers and 3 different audio clips.
    Is the audio clip playing when you use it in another way? The only difference seems to be that you have a VO clip and I used one of the included sounds with Captivate.
    Another way could be to attach the audio to the text container as object audio. Once you show the text, audio will play, when you hide the text it will stop. That was the way to go before CP6:
    http://blog.lilybiri.com/playtime-with-audio-and-widgets
    Lilybiri

  • I have created an I-tunes playlist consisting of audio recordings recorded in Quick Time 7. The play list works fine in the computer and in the I-pod. However; I am unable to burn the playlist to a Cd disc. what am I missing ?

    I have created an I-tunes playlist consisting of audio recordings (AAC) recorded in Quick Time 7 Pro.. The play list works fine in the computer and in the I-pod. However; I am unable to burn the playlist to a Cd disc. What am I missing ?
    Audio recordings created with Quick time Player 7 and installed as playlist in I-tunes . Playlist works fine in Ipod; unable to burn to a disc. 

    Hi ! to Bd Aqua !
    Thank you for your response. :
    1. Audio recordings recorded in Quicktime 7 pro . Eighteen separate short recordings (18 tracks).
    1A. the combined playlist byte is 28.3 Megabytes
    2. Moved to I-tune.
    3. Created playlist in I-tunes.
    4.I go to file dropdown and request "burn playlist to disc"
    5. Burn Settings dialog box appears.  I click burn.
    6."Insert blank disc", appears in top wlindow.
    7. insert blank disc;  the 'Insert blank disc order" disappears but nothing happens after that.
    There is no indication or even a hint of anything happening.
    Hope you can help, Thanks

  • Can i play audio and record video at the same time, disabling the external mike, so the video has that audio?

    can i play  audio while recording a video so that the audio is recorded with the video? .. disabling the inboard mic, ? .. thank you 

    Hi SwedelostinAmerica,
    Welcome to the Apple Support Communities!
    The iPhone can maintain multiple pairing records, but it can only connect to one headset or hands-free device at a time. However, in your situation there may be a solution. You can connect the iPhone via Bluetooth for calls and use the 3.5mm jack on your iPhone and car radio to connect for music.
    The following article explains Bluetooth pairing and usage. Please use it as a reference.
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/HT1664
    Have a great day,
    Joe

  • Quicktime audio recording...records the audio of QTmovie I am playing

    I am triying to create a new audio recording (I am doing a translation). But I need to playback the quicktime movie I am trying to translate. (So, I will know what i am translating), but the new audio recording records the audio of the quicktime movie i am playing not my voice. ...help I am a rookie...XP

    Hello, Brenden. Thanks for taking the time to look at my question.
    What I mean is, whenever I plug my headphones into my computer, it's as if they're not there. I can still hear what I'm playing even though the headphones are plugged in.
    I don't know if that clears up what you didn't understand about my question. I posted a video on Vimeo.com showing what my issue is. I hope watching it will make my question a bit less vague.
    Here's the link to it:
    https://vimeo.com/115614338
    -"apple.asker"

  • I have a issue screen recording on my mac with quick time player. I have a 13' MacBook Air and i am able to screen record perfectly. But when I Plug in my head phones in to the port I am not able to record the audio.Only just the screen rec

    I would like to know If I will be able to record(using quick time player) both audio and video on my mac with head phones connected
    My Mac - OSX Version 10.9.3 , Processor 1.8GHz Intel core i5, Memory 4GB 1600 Mhz DDR3

    Hi Sansony,
    Welcome to the Apple Support Communities!
    I understand you would like to record audio from the headphones you connected to your computer. When recording audio with QuickTime Player, you can choose to use the built-in microphone, an external microphone you’ve connected, or a microphone from a connected Apple display. Please use the following article as a reference.
    Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
    http://support.apple.com/kb/ht4024
    Clicking the triangle icon gives you additional options, such as letting you choose whether to use the built-in microphone on your Mac, an external microphone you've connected to your Mac, a microphone from a connected Apple display, or the option to simply use no microphone at all. The triangle also allows you to adjust the finished quality of your screen recording, select whether or not your mouse clicks are shown during the recording (the pointer is highlighted when you click), and to select what location (on your Mac) to save your screen recording when finished.
    Have a great day,
    Joe

Maybe you are looking for