Recording through line in on a v p

hi Alli have just bought the above and i am really pleased with it but i have one question, as i am a certain age i purchased the above so it would be easy to put some of my record collection onto my v plus ( via the line in) i was wondering if anyone knows of any software which will track mark, or do i have to record each track seperately. hope someone can help. Thanks KevBong3405

In Multitrack view, Options, there is a Monitoring option where you should be able to set Audition Mix to Always.
This doesn't appear in Edit View.

Similar Messages

How do I record through Line in on Macbook Pro 13"?

How do I record through Line in on Macbook Pro 13"?
Do I need special software?
How to change the setup?
Shlomo

Shlomofromoh wrote:
How do I record through Line in on Macbook Pro 13"?
Let me be sure I understand what you need. You want to connect an audio device to the Audio In port of your MBP and record its output with the MBP.
If that's correct, what you need is audio editing software. You can use GarageBand, which probably came bundled with your MBP, but it's a bit heavy for that purpose alone. A better tool is the free audio editor Audacity. It's powerful and cross-platform, which means that it's a little rougher around the edges than is usually the case with Mac software, but you can't beat the price. There are others (Sound Studio, Amadeus Pro, TwistedWave, Wave Editor, and more), but you can get going with Audacity.

Cannot record through line-in in bootcamp MBP late summer '09 model

cannot record through line-in in bootcamp MBP late summer '09 model
audio source (mp3 player) <3.5mm male input-------------3.5mm male input> line-in to macbook pro late summer 2009 model bootcamp windows xp sp2
when i select microphone in the audio panel - it works
when i select line-in and plug in the 3.5mm jack input to 3.5mm jack input to a fm radio for ex. it doesn't work
how do i make the line-in work?
i remember that when i first installed mac osx sl and windows xp bootcamp - the first couple of times around when partitioning the hd - the line-in worked a couple of times, in between times somewhere along the line i made some change to the spdif settings ?? or driver / to make the red light that comes on in the line-in jack go away - the other method was to use a toothpick to push a tiny button inside the jack, did that once -but the redlight came back again after a restart on bootcamp side.
thanks in advance,
-r

Although I don't use it, the Line-Input jack should require a signal about 40dB higher than what a microphone alone puts out. If your cable only adapts the connector and does not provide amplification, I'm not surprised you get nothing. If you are lucky, you MIGHT get a low signal by going into System Prefs/Sound/input/line-in and turning the input level slider all the way up. But the real answer to to get a mike preamp or mixer, or a mike with line-level output. Some products take a mike input and convert it to digital into the USB port.

Trying to record through line in no wo

Hey, I am using a sound blaster li've sound card and want to record through the line in port on the back. I have bought a convertor which has allowed me to plug my guitar into the line in however when i play nothing comes out and my recording programs don't reconize the line in. Nothing is muted so that is not the problem. If anyone could help me out i would greatly appreciate it thanks.

yeah i have a similar problem when recording through my microphone. I like to play my little guitar, sing my little songs anre record them via microphone. I noticed, no sound. I had the volume turned down as to prevent the annoying "squuueeeeeeeeeel". but i noticed when i turn my speaker volume up, it records.. but then i get the occational "squeeeeeeeeel" hmm. i'm starting to notice, i'm having all sorts of problems with thsi card. lol

Problem recording through line-in p

I am trying to record some old jazz tracks from vinyl so I can restore the sound using Cool Edit 2000 and have connected my turntable, via an amplifier, to the line-in port on the soundcard. This system worked fine on my old PC which had no sound card but an integrated audio chip. However, it won't work on the 5. card. I get hardly any signal, not enough to show a wave form in CE2k. Turning up the volume on the amp doesn't help.
I have tried recording through Creative Recorder, Windows Recorder an CE2k but with no success.
I don't now if it is significant but the signal on the Creative Recorder monitor is exremely low (one green bar) and will not increase
I have identified the line in port as the blue coded one; I assume this is correct!!
Does anyone have any suggestions ?
Regards
Art Payne

artpayne wrote:
I am trying to record some old jazz tracks from vinyl so I can restore the sound using Cool Edit 2000 and have connected my turntable, via an amplifier, to the line-in port on the soundcard. This system worked fine on my old PC which had no sound card but an integrated audio chip. However, it won't work on the 5. card. I get hardly any signal, not enough to show a wave form in CE2k. Turning up the volume on the amp doesn't help. I have tried recording through Creative Recorder, Windows Recorder an CE2k but with no success. I don't now if it is significant but the signal on the Creative Recorder monitor is exremely low (one green bar) and will not increaseI have identified the line in port as the blue coded one; I assume this is correct!!Does anyone have any suggestions ?RegardsArt Payne
Have you
- set your source level (source: LineIn) to max and
- recording source to AnalogMix(Line,CD,...) (or LineIn) and adjust it's level (can be set by pressing the icon above rec level slider)
on Surround Mixer or/and Control Panel:Sounds and Multimedia -settings panel (see these are egual).
.jtpMessage Edited by jutapa on 09-0-2005 :48 PM

Recording through Line-In causes hum

Hello Apple User,
i want to record my vinyls to my Mac.
I always used the Line-In from my Powerbook and it worked fine.
Now, i got a new iMac Intel and i want to do the same thing, but when i plug the cable in, i get a hum, which i can hear through my headphones at the mixer.
It's like a feedback hum from the computer.
Setup
Technics MKII > Ecler HAK 320 > Cinch-Line-In Adapter > iMac
Is the hard-drive too close to the Audio-in ?
Or any other idea ?

ok, i answered it by myself.
It was the power cable.

High-frequency permanent distortion while recording through Line-In

Hi Everyone!
I'm recording music from my MiniDisc Player connected with Audio Cable to Line-In port. I'm using Real Instrumen track for this. When I record or even only listen to the music I hear permanent High-frequency Tone in background. I can record with no problems but my recordings are always accopanied with this distortion. I've checked it out also on Windows (Boot Camp) and there are no such noices. Somebody knows what could help? Maybe it's something with audio drivers?

In Multitrack view, Options, there is a Monitoring option where you should be able to set Audition Mix to Always.
This doesn't appear in Edit View.

Recording a Line Signal through Motu 828mk3 into Cubase, Please help!

Hello everyone,
So i use Motu 828mk3, pair of m-audio monitors, I have logic but find Cubase more compatible for my style. I want to record a line in signal from my DJ mixer (allen&heath xone 62, pair of Pionner cdjs-1000).
So i connect the main outs (xlr to 1/8") into my Motu analog 1-2 ins. The meter on the Motu reads the signal, i expected the signal to come through my monitors although they are silent. I dont understand what blocks the Main Outs of my Motu.(If i play a song on itunes or a sample in cubase it plays through my monitors)
I set everything correct on my Motu Audio Setup, i put Default input as my Analog 1-2, and default main outs as Main Outs.
The Cue mixer which comes with Motu reads the in signal also. I tried to get it connected though cubase too, but im assuming that once i get motu release the signal through my outs i will be able to connect it through cubase.
Seems like i tried everything in my knowledge, now i need your help. Thank you folks

Yes i checked on My system preferences, everything is there for Motu, it reads the input and it send out sound from itunes youtube etc.
In cubase, well first i feel like the input should come out the Main outs of the Motu even if wouldnt want to record anything right ?
And yes in cubase everything seems to be set to record, drivers are motu on, setting are set, the handle (little speaker) is on to record, in preferences of Device setup motu it set active.

Recording from line-in without Audacity

I've got a bunch of vinyls I'd like to start recording to my computer, and it seems that the best way to do it is through Audacity. But I seem to have the problem where PortMixer isn't included in the version of Audacity that I have, so I can't record from line-in. I've tried other versions of 1.3.x, but I can't get any of them to compile. Apparently 1.2.x would work, but it uses OSS and I have ALSA. So is there any other program that I can use to record from line-in?
Thanks!

Thanks, but when I tried that I hit the "Start Recording" button and it just returned to the main menu. I'm assuming its because I need xmixer installed. I tried finding it on Google, and apparently xmixer is the same as xmix, but I could only find that on Freshmeat and it seems to be broken (when you run it it just spits out some errors and quits).

How to save Custom control records through module pool program ?

Hi guru ,
1. How to save Custom control records through module pool program ?
I wrote multiple lines of record in custom control
Who to save that records ?
thanking you.
Regards,
Subash.

Hi,
can refer following code -
IN PAI , CODE is as follows-
*&      Form editor_output
FORM editor_output .
NARRATION1 is name of custom controller
IF v_editor IS INITIAL.
Create obejct for custom container
    CREATE OBJECT v_custom_container
      EXPORTING
        container_name              = 'NARRATION1'
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Create obejct for the TextEditor control
    CREATE OBJECT v_editor
      EXPORTING
        wordwrap_mode              = cl_gui_textedit=>wordwrap_at_fixed_position
        wordwrap_position          = line_length
        wordwrap_to_linebreak_mode = cl_gui_textedit=>true
        parent                     = v_custom_container
      EXCEPTIONS
        error_cntl_create          = 1
        error_cntl_init            = 2
        error_cntl_link            = 3
        error_dp_create            = 4
        gui_type_not_supported     = 5
        OTHERS                     = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
ENDFORM.                    " editor_output
getting textdata in internal table as follows
*&      Form create_text
FORM create_text .
REFRESH : it_texttable,
            it_text.
IF v_doc_number IS NOT INITIAL.
    IF v_editor IS NOT INITIAL.
      CALL METHOD v_editor->get_text_as_r3table
        IMPORTING
          table                  = it_texttable
        EXCEPTIONS
          error_dp               = 1
          error_cntl_call_method = 2
          error_dp_create        = 3
          potential_data_loss    = 4
          OTHERS                 = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
Now, our final text data is in internal table it_texttable.
pls, Reward if found helpful.

Trying to record through soundboard in Sound Studio?

Hi all-
I have been trying to record an audio clip into Sound Studio 2.2.4. The default is for the MacBook Pro to play the clip through the speakers and for Sound Studio to record through the microphone, in which case I can get good levels but the recording is echo-ey and bad. When I switch to the only other source option, Built-in Input, I get no signal or levels in Sound Studio at all.
Am I doing something foolish? Does SS not have this capacity? Or do Macs not use the soundboard the way a PC does? Any help would be appreciated!
Thanks,
Matthew

I have a very similar problem on my iMac. I've tried 3 sound programs and none of them can record internally, without having to resort to speakers out mic in. Each program has an option for internally recording but the problem appears to be my own sound preferences as they just list the mic, the line in and a blue tooth device called LAVINIA that I know nothing about!

Recording through the Mac Audio Tracks rather than through the Mic.

I figured this would be very handy since I'm just recording the sound from a YouTube video, I don't want to have to use the mic to record the sound, If it's possible to save the Mac Audio Tracks, which is basically anything that comes out of the speaker, to a file to be used by Garageband later? Or is there a way to record, not through the mic, but using the Mac Audio Track through Garageband? It would help because I realized when I recorded through the mic that I had to worry about everyone around me being quite for a few seconds only to realize that the fan was running full boar which made the quality terrible. Just looking for an alternative. Maybe a program that records the Mac Audio Tracks? Sorry for the long-winded post.

I know a way around this as I had the same problem once. I bought a small lead with stereo mini jack to stereo mini jack which enabled me to connect the headphones socket to the line/mic in socket. This means that any sound your computer makes can be recorded directly using any recording application, including Garageband. No fear of extraneous noise as it is a direct connection not microphone. There may well be a purely 'software' method also but I can confirm that this does work anyway.

Equium M70-339 - not possible to record through internal microphone

I have an Equium M70-339 (running XP home) not recording through internal microphone
The internal michrophone is not detecting voice - no wavy line on sound recorder and Skype not picking up my voice, yet the device manager tells me it's working properly and the microphone is selected in sound and audio settings.

Are you really sure that your notebook model has an internal mic? I have Satellite M70-159 and there is no internal mic.

I can record midi data from my Mason & Hamlin Piano Disc Pro Record through my MOTU Traveller into Logic but Logic won't send midi data out to the MOTU Traveller to the Piano Disc player

Hello All,
I can record midi data from my Mason & Hamlin Piano Disc Pro Record through my MOTU Traveller into Logic Pro 9.1.8 but Logic won't send the midi data back out to the MOTU Traveller and thus to the Piano Disc player. I got it to playback one time but have no idea how and when it did it was looping or something because the velocity was way high coming back in and the damper pedal was slamming down. When I play a key on the piano the midi "in" light on the Traveller lights up. When I play the track back on my computer no lights blink on the Traveller and when I did the apple midi studio test in utilities when I play a key I get the confirmation signal noise and the Traveller blinks when I click on the down arrow of the Traveller in the Apple midi studio test the midi out light on the traveller never lights and the signal light on the piano does not blink either. No outbound signal at all...
I have messed with every possible parameter I can find and and have had help from one of Piano Disc's premier editors but no luck. The piano was prepped for me on Logic so it would work with my studio. I'm positive it's my fault and I'm overlooking something really simple and stupid but what!??!
Somebody please help. Thank you all in advance for ANY ideas you might have!

Blues Piano,
I'm not sure if this will be a help or not. I'm so Logic Pro wet behind the ears that I make newbies look experienced. However, I'm not expecting many on the Apple support forums have a PianoDisc system, much less one with the new optical record strip. While I don't have any record strip on my PianoDisc, I do have a PianoDisc iQ that's only a month old. I've been playing converted paper scrolls from hundred year old player pianos through it via the MIDI in port of the PianoDisc CPU. I've found I have to open the MIDI file in Logic Pro (10.0.4) then go to <Track><New External MIDI Track> then copy the existing track to that new external track. Only then can I see in the Track inspector (defaults left side of screen with the Icon for the instrument) the "Port" parameter. Then I can select my external MIDI device in that Port selector.
I've also encountered problems with the PianoDisc not using enough force on the notes or using too much force. To get around this problem, until I understand Logic better, I've been setting minimum and maximum volicities. To do that I right click on the track and select "Select All." Then I right click again and select "MIDI" then "MIDI Transform" then "Velocity Limiter." In the resulting pop up window in the center is a drop down and you can play with the velocity from "MIN" to "MAX" along with "ADD" "SUBTRACT" etc.
I hope this helps. I envy you your Mason & Hamlin. If you need more help on this just email me at pfleischmann at mac dot com.

Some fields are missing while recording through shdb

Dear Abapers,
I am doing bdc for F-27 t.code.Some fields,cobl-gsber(business area),cobl-kostl(Cost center) are missing while recording through SHDB.But when do it manualy the fields are displaying.Also i have ddded those fields manualy in the program,stll the fields are not getting captured.May anyone pls help me,why this problem is happening?What is the solution for this.
Thanks in Advance.

hi
i can tell u that few transactions wont suffice us with BDC,so for such transactions we do bdc with similar kind of transactions.
ie., The transactions FB60 and f-63 both are meant for Parking.
But we cant do bdc for FB60 Parking. So we do bdc for f-63.
similarly when we do bdc for vendor few fields wont appear...in that case, we use bapi for it....
So try to find an appropriate bapi or similar tcode which will suffice ur need
hope its clear.
Regards
Sajid

Recording through line in on a v p

Similar Messages

Maybe you are looking for