Recording to removable media

Is it possible to transfer recorded programs from the DVR to a DVD or VHS tape? Is it possible to record directly to my computer hard drive and/or DVD?

To DVD or VCR sure, I transfer to DVD all the time.
To computer. This is complicated. For most, the answer will be no. But there are ways if you want to work at it.
But the easy one.
If you have a DVD burner, Then you just connect your DVR to the DVD recorder. Then you play on the dvr and record on the dvd. The only issue with this kind of transfer is that you have to watch the program while recording it. I usually do it at night when I'm sleeping. Just set the timers but it works well
====================================================================================
Error exists between keyboard and chair.

Similar Messages

Stability of Removable Media support in Linux?

Hey all, I'd previously thought support for removable media in linux was very good, and everthing I've used has been detected and mounted correctly and such, however I have experienced some corruption on them, especially on my microSD, as I've recently lost a few photos.
I'm wondering the current status of the support in linux, is it stable, are there any problems, or is it my configuration?
I use Thunar+Hal to manage my removable media.
Thanks

I have found one "odd" issue with Linux: sometimes it delays writing to some external usb card readers. It might be an issue with the reader but it seems absent in XP. I have a kingston multi card reader. I started using it to run my live Arch (Chakra-Live) because it was faster than an ide sd card adapter (odd); however, if I saved my overlay, the drive would show little activity while it was using squashfs on the overlay, and right at the end, the reader light would start flashing but the machine would shut down while the light was still going... and it always botched the save and lost data. It only happened with the external reader; if the card was mounted on the internal reader on my eee-box, or in the ide adapter, it was fine.
Do make sure you do unmount / safely remove the drive, and maybe wait a few seconds. I know my sandisk micromate has no light, so there is no way of telling if has stopped or not.

JCVS condition not coming in PO, Condition record exists (removed manually)

Hi Gurus,
I have created a new tax procedure which has the condition type JCVS.
Condition type has no routines attached to it and the condition record is maintained which is also valid.
I have also assigned the tax code to the company code in SPRO > Logictics general > Tax on goods mvmt > India > Determination of excise duty > Asssign tax code to company code.
However when the tax code is applied to a PO the condition type JCVS is not appearing and in analysis it shows Condition record exists (removed manually).
Please advice what will be the reason.
Thanks,
Prakash

No response.

USB card reader working, but not showing up in removable media... why?

For some reason lately, my USB mounts, but doesn't show up in the Finder left-hand area with the other removable media, such as DVDs. I have to access it via My Computer, where it does show up. And I have to eject it in Disk Utility.
It does show up normally in iPhoto.
Any idea why this might happen?
Thanks,
doug

Welcome! ...I would try Apple's 'Troubleshooting Assistant' first : )
http://www.apple.com/support/ipod/five_rs/

Shipment cost :Cond. type FS00 - condition record exists (removed manualy)

hey all ,
my requirement is to charge for every container (packing material) in the shipment .
i coped condition FS00 (container) and called it Z100 .
the condition is defined with following parameters :
cond.class : B - prices
calc.type : S -number of shipping units
calc base : C -handling units
the condition opens in a pricing procedure under item category ZK01 which is defined the shipment header as cost relevant.
AND the problem :
when i opens the shipment cost document the condition doesn't appears .
in the analysis i get this message :
" condition record exists ( removed manually ) "
when i add the condition manually and double click on him there is a field that
specify that the condition is inactive because : " inactive due to calculation basis (shipping)
after checking the relevant notes :
i don't have a requirement in the procedure or the access to this condition .
i didnt delete is manually
so the above isn't the reasons that the condition isn't showing .
other condition types ( old condition types ) is active in this procedure ( new procedure )
does any body have an idea ?
Best Regards
ASA

hey RP ,
no exclusion and no formulas in this pricing procedure ?
any other ideas ?
i post this in an other forum and got this :
Hi,
There should not be two or more conditions with the condition class B in the
same pricing procedure.If there are two coditionswith the condition class B
in the same pricing procedure then it will invalidate all other conditions
in the pricing procedure.Check if any other condition(other than Z100) has
the same condition class. If yes use some other condition class for it.
Regards
Avinash Gyale
is it make any sense ?

Debit memo Condition record exists (removed manually) MWBO Italy

Currently I am working on an Italian pricing issue.
Pricing V/08
Cond     Description            Fr. To. P Req. Calc. BasT.
LCIT     VAT license Italy      900     S 33   37
MWST     Output Tax                     S 10         904
BOLL     Bollo in Fattura       900     S       903   26
MWBO     Opt.tax Bollo in Fat   924     S 924 903   26
The requirments, calculation type and are all based on SAP notes regarding the LCIT, BOLL. eg. 715399 and 593672
The main requirement here is that 924 is only to activate the MWBO condition in the invoice.
This means that for a normal order (TAN) item the LCIT, MWST and BOLL is shown. If we create a delivery - invoice, the pricing in the invoice shows LCIT, MWST, BOLL and MWBO. This is correct. MWBO is a tax condition.
But if we create a debit memo request the behavior is different and would appreciate some insight.
Debit memo request created, LCIT, MWST and BOLL is shown (as expected). MWBO not shown due to requirement, that's correct.
But when I create a debit memo from this one, the LCIT, MWST, BOLL are shown. If I go into the pricing analysis then I see that the condition record for MWBO has been found but with message: Condition record exists (removed manually). Saving the document does not trigger it afterwards.
I have looked on OSS (example note 859876) to determine the cause of not triggering it.
We are not using the user exits for these conditons in example: user_exit_pricing_prepare_tkomp, user_exit_pricing_prepare_tkomk, mv45afzz or rv60afzz.
The standard copy control of L2N to the invoice is set to D. If I change this for example to G (copy unchanged, redetermine taxes), then it works. But not sure if this causes disturbtion of the regular behavior of the L2N.
In best case I would only do the G pricing type for the MWBO condition so I do not disturb the existing process. Any suggestions? I know there is RV61AFZA for manipulating the pricing type (in case you want to have user defined pricing type eg. Y). But this can not be handled per condition type, or is that possible?

Routine 924 is a altered routine provided by SAP to suppress the condition in the order - not in the invoice.
http://service.sap.com/sap/support/notes/715399
quote:
"In this case, the bollo should only be reported on billing documents, not on the
order. However, pricing condition '24' delivered in the standard system
only partially covers this requirement."
The issue here is that it is triggered with normal order - delivery - invoice. But not with credit memo, it gives message that condition is removed manually. The L2N item category is set to D (copy pricing elements unchanged). When changing it to G (copy pricing elements unchanged - redetermine taxes), it works. But that has an effect on all standard usage of the L2N and I only want to actually fix it for that condition type.

How to catalogue "old" removable media

Hi, I shoot photos, download them from my SD memory into my hard disk, and import them using LR 1.3.
Soon my hard disk gets full and so I can export them burning them onto dvds, retaining all related metadata.
But, what if I want to import from optical media I burned 1 year ago? I have tens of dvd plenty of photos I wished to import in LR, so that in future I could find what I search for using LR good filters.
I don't want to spend time telling LR where the orphan photos are, I simply want LR to answer me 'this photo was on a removable media named "PHOTOS_13".' when I search for a particular keyword.
If I don't go wrong, simpler applications like ACDSee or ThumbsPlus allow this...
Nino

There isn't a way to do this yet in LR, but it sure has been discussed a lot in this forum. Do a forum search for "offline" to find some of what people have been asking for.

Removable media

For some reason I cannot unmount removable media (in my case a USB flash drive) from Thunar using HAL. I believe it is saying that I do not have permission to unmount it. I've tried putting my user in the groups "hal" and "storage". I can't seem to find a solution.
What's strange to me is the fact that it unmounts sometimes but other times not...
Anyone got an idea?

That sounds right! I feel so stupid, it's just when I seen the word "permission" in the error dialog I thought I didn't have sufficient privelages to unmount the media.
Thanks.

Gnome: Add custom command to Removable Media application

I'm trying to setup cvlc to run a DVD when inserted into the drive. I created a cvlc.desktop so it is seen when I go to to the Removable Media menu but it doesn't work because a custom command is required. How do I configure it so that one can be run? The cvlc command to run a DVD is:
cvlc dvd://
Any ideas?

Try modify /etc/PolicyKit/PolicyKit.conf as root:
<match user="$USER">
<match action="org.freedesktop.hal.storage.*">
<return result="yes"/>
</match>
<match action="hal-storage-mount-fixed-extra-options">
<return result="yes" />
</match>
<match action="hal-storage-mount-removable-extra-options">
<return result="yes" />
</match>
</match>
Change $USER for your username... then /etc/rc.d/hal restart as root

Saving Messages to removable media

A user has messages that they would like to transfer to CD or USB Memory stick or some other form of removable media. I understand that the messages are wave files, but how do I get access to them so that I can copy over for them!?

Hi Janis,
I remembered seeing this thread some time ago. Maybe it will give you what you need. The answer is from Hin@Cisco Systems;
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Unified%20Communications%20Applications&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dd9cedd/3#selected_message
Hope this helps!
Rob

Copy Keychain to Removable Media

Hello All:
I wish to 'copy' my Keychain to removable media, just in case something untoward happens. Of course, the backup is in Time Machine, however without another 'Mac' around I cannot access the data. So, I figured I copy Keychain to removable media (iPod Classic set up as hard drive).
Now, Mac Help says to "Copy your keychain to a location... or copy it to your removable media."
Great! Now for the daft question: How do I (exactly) copy my keychain to removable media?
Many, many thanks in advance!

V.K.:
Many Thanks for the reply. I should have thought it would be as easy as that. Although you are absolutely right that removable media is no better than a TM back-up, considering I will still need a Mac to access Keychain, it is more useful to me. It is easier to travel with the iPod (Classic) and have the info available than to carry a TM, even if I will need to locate a Mac to access.
Many thanks again,
Bill

Kingston DataTraveler shown as having removable media.

I have tried two new Kingston HyperX 3.0 DataTraveler DTHX30/256GB USB Flash drives in my Lenovo T500 2081 with Windows 7 Professional 64-bit, but both show up in Explorer and Storage Disk Management as a device with removable media--as opposed to being a removable drive. It therefore has 0 capacity and cannot be accessed for reading or writing, nor formatting. I have checked that I have the latest Microsoft and Lenovo drivers, but nothing I have tried or that has been suggested by Kingston or other sources fixes this issue. The DTHX30/256GB works fine on computers with Windows 7 32-bit and Windows XP, just not on my Lenovo T500. I have used Diskpart on another computer to clean, partition, and reformat the DTHX30/256GB without any affect on how the T500 sees the drive. I also used a software utility on another computer to "flip" the removable bit without apparent affect in how the T500 sees the drive. What is causing this issue and how to fix it?

could you try the testing repo?
there is the new udev along with new initscripts that should fix it.
other fix would be to change the udev.rules rule according to this:
# never access removable ide devices, the drivers are causing event loops on open()
BUS=="ide", DRIVER!="ide-cdrom", SYSFS{block/removable}="1", GOTO="persistent_end"

Vold Manager never detects the cd rom and any other removable media

Hi,
I have installed solaris 10(i86pc i386 i86pc) on my PC through Oracle Virtual box but I am stucked in a problem that the vold manager never detects the cd rom and any other removable media devices. I have tried many documented methods but could not get solution to this problem. I also stopped the volume manager (vold) and tried to mount the cd rom manually but still could not mount the cd rom.
I don't know how to configure solaris in such a way that it could detect cd rom and any other removable media.
Any help in this regard will be highly appreciated.
Regards,
Anees

Is it an IDE or SCSI CD-ROM? Can you post back the output of the following command?
ls -l /dev/dsk/c*

Condition record exists (removed manually)

Hi
I have created one RFQ w.r.t PR. In ME47 transaction am not getting one condition type (ZNVS)automatically, though it is selected as "automatic display has high priority" in condition type.When analysis is selected system is showing the message "condition record exists (removed manually)
I have maintained condition record in MEK1 for ZNVS.ZNVS is negative value of NAVS (Non deductable condition type)
So that I can deduct the value from JEXS and only excise will be displayed.
how can I get that ZNVS condition type in RFQ conditions Automatically.
Need Help.

What the pricing analysis is saying is that a condition record has been found but it has been removed manually. It can happen in the following cases
1. If a user manually deleted it from the pricing screen, this seems unlikely in your case
2. There is a requirement on condition type K007 level or its access sequence K007 level in the pricing procedure, which removes the retrieved condition record. Check this in the pricing procedure-condition type assignment and access sequence definition
3. There is a formula (alternative calculation type) where there is some code written to remove the retrieve condition type
4. A user-exit is used during condition access and which removes specific condition records from the set retrieved for the pricing procedure
IMG Path : Sales & Distribution -> Basic functions -> Pricing -> Pricing control -> Define and assign pricing procedures (use this to check requirements and formulas at condition type K007 level)
IMG Path : Sales & Distribution -> Basic functions -> Pricing -> Pricing control -> Define access sequences (use this to check if there is any requirement at access sequence K007 level)

Windows 7 GPO - Disable All Removable Media then Re-enable, now CD/DVD drive is inaccessible

Ok, this might be better placed in the Windows 7 forum, but we're having some issues with limiting access to removable media via GPO.
We've set up a GPO for Computer Policy, Admin Templates, System, Removable Storage Access, All Removable Storage classes: Deny all access - Enabled
After finding that this was a bit too restrictive we reset it back to Not Configured (and later Disabled to try and force it) but it seems to break our DVD drives on all Win7 x64 machines (the gpo is limited to apply only to these machines). Instead
of the usual icon in my computer it shows a description of the CD/DVD in the drive and the usual "unknown file type" icon. if you take the cd out it shows the usual cd rom icon, but still gives "access denied"
There is one workaround, and that is to set the GPO back to not configured and manually remove the CD/DVD device via device manager, restart, and allow windows to re-install the device drivers.
This is 100% repeatable by applying the same local computer policy (All Removable Storage classes: Deny all access - Enabled" and restarting the machine.
Has anyone else run into this problem before? And how can we fix it without having to go to every machine to remove the DVD drive from device manager?
Thanks,
-Nick

Hi,
after looking on many pages for a solution i always found the same workarounds - but for me deleting the device is no option because you aren't allowed to delete devices without administrative rights. Also I can't expect that our users always have to reinstall
the device.
So i analyzed whats going on in the registry when the key "Deny_All" for blocking RemovableStorageAccess is set to 1 - with the running of gpupdate i realized that Windows is writing a registry key to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE\Device\
named "security". The problem is that windows doesn't delete this key after setting the key "Deny_All" back to 0. Only sometimes it will be deleted, for example when you apply the policy for blocking devices and reverse this setting immediatly without a restart
of windows.
I made a little script which I integrated in the user-gpo (as logon script) for granting access to the removable storage devices:
'****SCRIPT START****
' this script searches for all "security"-keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE\ and deletes them
Option Explicit
Const HKEY_LOCAL_MACHINE = &H80000002
Dim oReg : Set oReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\default:StdRegProv")
Dim oShell : Set oShell = CreateObject("WScript.Shell")
Dim sPath, aSub, sKey, aSubToo, sKeyToo, dwValue
' Get all keys within sPath
sPath = "SYSTEM\CurrentControlSet\Enum\IDE"
oReg.EnumKey HKEY_LOCAL_MACHINE, sPath, aSub
' Loop through each key
For Each sKey In aSub
    'Get all subkeys within the key 'sKey'
    oReg.EnumKey HKEY_LOCAL_MACHINE, sPath & "\" & sKey, aSubToo
    For Each sKeyToo In aSubToo
        oReg.deleteValue HKEY_LOCAL_MACHINE, sPath & "\" & sKey & "\" & sKeyToo , "Security"
        if Err.Number<>0 then
            Err.Clear
        end if
    Next
Next
'****SCRIPT END****
The policy for giving access to removable storage looks like this now:
- a logon script is executed which searches for all "security"-keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE\ and deletes them
- the setting "All Removable Storage classes: Deny all access" ist set to "Disabled"
I hope this helps...
Regards
Swanson

Recording to removable media

Similar Messages

Maybe you are looking for