Recording to tape from the timeline

I'm trying to get my sequence onto tape by recording from the timeline. I'm able to capture footage from camera (Canon XLH1), but when I try to export to tape, my cam is not recognized. I've checked the manual settings and have checked the control panel and the cam is recognized by my computer. Any thoughts?

Thanks for the link to that thread!
My computer is ok but not great.
Dell Inspiron 530:
1 TB 7200 rpm dedicated video drive recently bought.
3 gigs of ram ( machine only holds 4).
CPU is an Intel Core 2 Quad Q6600 @2.4 Ghz
OS is Vista Home Premium 32-bit with service pack 2 installed.
My OS drive is on the small side (250 gigs).
All my drives were just defragged today.
Graphics card is ATI Radeon 2400 HD Pro.
Have front and back firewire ports
I'm wondering if I may be sucessfull with a Canon HV 30 or 40 in lieu of using an A1.
Maybe my firewire cord is not up to the task.
Something is interupting the flow of data while it exports as it transcodes fine!

Similar Messages

Feature Request: Modify Audio Channels from the Timeline in Premiere CC.1

Why have we never been able to modify audio channels once a clip is added to a sequence? I'm guessing there's a good reason Adobe has never had this feature. The lack of this feature is explicitly mentioned a few times in the audio section of the Premiere Pro CC manual, as if it's a benefit NOT to have it. But the benefit is entirely lost on me.
In my workflow, I synchronize my double-system video and audio before anything else. I do this in PluralEyes (and unfortunately I'll have to keep doing it this way, until PPr's sync on sound feature gets fixed—for me it's never worked).
Once PluralEyes has synched hours of footage and audio and placed it on a PLURALEYES GENERATED sequence, I import that sequence into Premiere. Note: Since I haven't gone through the step of creating a blank New Sequence, I don't get the opportunity to setup my audio channels the way I'd like in my sequence (i.e. Stereo recordings should occupy ONE track, not two. Typically these tracks come from a camcorder and are used for reference sound, or ambient noise at best, so I don't need them taking up precious real estate in my sequence).
Since PluralEyes doesn't merge my clips for me (or rather I don't want it to since I'm usually doing multi-cam sequences where I want to keep all 14, or so, tracks of audio), I have to go through the clips one by one and do a Merge Clip action once I've adjusted any minor sync issues, or determined which tracks I actually want to keep. But, and here's the key, at this stage I'm not yet 100% certain whether I'll use the nat sound or the wireless mic sound (separate audio recorder, etc). Furthermore, I don't really want to think about that at this point. After I've spent a few mind-numbing hours just ingesting files, sync and merges, I want to jump into the edit as soon as possible, before I lose all will to finish this edit. If I modify my audio channels right now, I'll lose the ability to make some creative decisions later on.
I'd like to start whacking out an assembly edit. And then after I have a rough program, I can start looking at which audio tracks (nat or double-system) I like better in each circumstance. This is where I become stumped that at this stage, I'm locked into whatever audio channels I've setup (or not) in the earliest stage of the edit, back before any media was actually on the timeline! It's at this stage, and usually only at this stage that I want to start Modifying Channels—FROM THE TIMELINE!
Does anyone else feel the same? If not, what is your workflow?
Feature Summary: Right-click on any clip, (master clip, sub-clip, merged, nested or otherwise) in the timeline and choose Modify > Audio Channels.
I've submitted a feature request, with a link back to this discussion, so please pipe in—especially if you want this feature.

Maybe its your specific workflow, asset mangement and use of a 3rd party application that runs you into an issue.
Take Pluraleyes out of the equation, I would imagine my workflow is the same as most everyone else. Find footage in the Media Browser. Import it. Create a Sequence and start editing. Use the Source Monitor to set Ins and Outs and then Insert the clip on the timeline.
At this point, if the audio needs to be modified, it cannot be done on the Timeline. The workaround, of course, is to Find Clip in Project; Modify Audio in the Project panel; then do a Matchframe to replace the audio clip. This works, but requires many steps per clip. Also, Matchframe in Premiere Pro CC is not reliable.
Introducing a new Modify Audio (from Timeline) feature as seen in the fantasy screenshot above would solve it.
I dont use Pluraleyse ...which I understand to be a synching aid...so I dont know the workflow it imposes on one .
Returning to Pluraleyes workflow, this issue is compounded by the need to Modify almost ALL audio. Every stereo track is separated and placed on two MONO tracks taking up precious real estate. This is not something Pluraleyes imposes. It is due to the way Premiere imports XML timelines. This would apply to sequences imported from Final Cut as well.
In this case it would be ideal to select both the LEFT and RIGHT mono tracks and choose "Modify > Audio Channels > Merge L/R Mono to a Single Stereo track." Ideal? No. I guess Ideal would be if Premiere would interpret XML files properly in the first place.
What actually is the issue with Premieres synch and merge workflow in your case?
Audio Sync in Premiere Pro doesn't work. Period.

How to recapture from the timeline?

I had a hard drive crash with 6 hours of footage on it. I need to re-capture the footage from the timeline. The project is only 2 min long but when I try and re-capture FCP wants to digitize all 6 hours of footage. How can I make it only capture what is in the timeline and not entire tapes?

I media managed the project using copy which kept all of the render files. Then I media managed the project as offline. I'm recapturing the segments that were lost with the offline and copy/pasting them into the copied sequence. Seems to be working. I just need to get 2 Betas out and then I can ditch the entire project!

Is there a way to copy & paste a clip from the timeline in one project in to another project?

Hello Popular Premiere Pontificaters,
I am using Premiere 6 on a Windows 7 machine.
Is there a way to copy and paste a clip from the timeline in one project in to another project?... I can copy my clip, but when I open the other project, it will not allow me to paste it in there... but I am able to copy and paste a clip within a single project. I tried everything... pasting in to a new video track and pasting in to an existing video track in the second project, but the paste option simply isn't there when I open the second project.
And if Premiere itself will not allow me to do this in any way, will a copy-paste clipboard type of accessory app allow me to do this?... if so, which is the best, trustworthy copy-paste app that is malware free?
Thanks,
digi

Hi Bill Hunt,
I just read the page that you provided about "Handles"... thanks allot for that ARTICLE. In your article and the subsequent article HANDLES, "Transitions Overview: applying transitions" linked from your article, it indicates (in PrE and PrPro anyway - I'm in Premiere 6) that transitions can be applied to non-Video 1 tracks... the paragraph below is a quote from that "Transitions Overview: applying transitions" article...
"Whatever is below the transition in a Timeline panel appears in the transparent portion of the transition (the portion of the effect that would display frames from the adjacent clip in a two-sided transition). If the clip is on Video 1 or has no clips beneath it, the transparent portions display black. If the clip is on a track above another clip, the lower clip is shown through the transition, making it look like a double-sided transition."
So this indicates that transitions can be applied to non-Video 1 tracks since it is referring to content in tracks beneath a transparent fade that would show through... and only non-Video 1 tracks can be transparent and have other clips "beneath" them in the timeline, right?
In the screenshot sample in your article at this LINK, I see the handles (referred to as B and E) and I can see in my monitor window how those handles would be represented by the two little bracket symbols { } ... you can see how they appear in my monitor window in Premiere 6 in this screenshot, and below, from a different thread that isn't related to this topic.
But I'm still trying to figure out how the handles can be applied in the non-Video 1 tracks in the timeline to insert a transition (cross-dissolve) between two clips.
Can you advise me on this?... I posted a separate thread HERE on this topic, but I haven't got any further with finding an answer.
Thanks so much for your article,
digi

Error while unloading a tape from the drive

I get the error - interrupted system call when I try to unload the tape from the drive. The lsvol command shows that the tape is in the drive.
in dte1: volume FS-ONSITE-000008, barcode HL1937L3, 386481152 kb remaining, expires 2009/12/05.16:05, lastse 31
ob> unloadvol -D tape1
Error: can't execute command - Interrupted system call
The sg_map command shows that the device is not being seen. We replaced the controller of the library. It is an HP MSL6060 with 2 tape drives - Fibre Channel connected.
[root@prsabkp01m-ebsd logs]# sg_map -i -x
Strange, could not find device /dev/nst0 mapped to sg device??
/dev/sg0 0 0 0 0 8 HP MSL6000 Series 0520
/dev/sg1 -2 -2 -2 -2 -2
/dev/sg2 0 0 0 2 12 HP NS E1200-160 5687
/dev/sg3 0 0 1 0 1 /dev/nst1 HP Ultrium 3-SCSI G65W
/dev/sg4 0 0 1 1 12 HP NS E1200-160 5687
The device /dev/sg1 represents tape1. The device /dev/sg3 is tape2 and /dev/sg0 is lib0 in OSB.
Edited by: user12199230 on Nov 14, 2009 7:41 AM

ob> lsvol -L lib0
Inventory of library lib0:
in 1: volume DB-ONSITE-000007, barcode HL1920L3, full, expires 2009/12/04.09:40
in 2: volume FS-ONSITE-000009, barcode HL1926L3, 400570368 kb remaining, expires 2009/12/06.00:19
in 4: barcode HL1955L3
in 5: barcode HL1940L3
in 15: volume OSB-CATALOG-MF-000010, barcode HL1923L3, 409670656 kb remaining, expires 2009/11/25.08:00
in 30: barcode HL1958L3
in 31: volume FS-ONSITE-000008, barcode HL1937L3, 386481152 kb remaining, expires 2009/12/05.16:05
in 32: volume DB-ONSITE-000011, barcode HL1932L3, 32879616 kb remaining, expires 2009/12/04.09:40
in 34: volume DB-ONSITE-000010, barcode HL1931L3, full, expires 2009/12/04.09:41
in 36: volume DB-ONSITE-000008, barcode HL1927L3, full, expires 2009/12/04.09:41
in 38: barcode HL1952L3
in 39: volume FS-ONSITE-000001, barcode HL1928L3, 351962112 kb remaining, expires 2010/01/11.14:28
in 40: volume RMAN-DEFAULT-000016, barcode HL1934L3, 409699328 kb remaining, content manages reuse
in 41: barcode HL1956L3
in 42: volume RMAN-DEFAULT-000015, barcode HL1935L3, 409670656 kb remaining, content manages reuse
in 44: barcode HL1925L3
in 45: barcode HL1938L3
in 46: barcode HL1953L3
in 47: volume OSB-CATALOG-MF-000008, barcode HL1924L3, 409886720 kb remaining, expired
in 48: barcode HL1959L3
in 49: volume FS-ONSITE-000002, barcode HL1930L3, 385258496 kb remaining, expires 2010/01/18.14:58
in 50: barcode HL1951L3
in 51: barcode HL1957L3
in 52: barcode HL1950L3
in 53: volume DB-ONSITE-000012, barcode HL1933L3, expires 2009/12/04.09:41
in 54: volume OSB-CATALOG-MF-000011, barcode HL1936L3, 409843712 kb remaining, expires 2009/12/02.08:01
in 55: barcode HL1939L3
in 56: volume DB-ONSITE-000009, barcode HL1929L3, full, expires 2009/12/04.09:40
in 57: volume FS-ONSITE-000006, barcode HL1922L3, 364110848 kb remaining, expires 2009/12/04.00:09
in 58: barcode CLN000L1
in dte1: barcode HL1921L3, 409915392 kb remaining, lastse 33
ob> unloadvol -D tape1 33
Error: can't execute command - Interrupted system call
I keep getting this error. What logs should I submit?
[root@prsabkp01m-ebsd ~]# service observiced stop
Stopping Oracle Secure Backup services: [ OK ]
[root@prsabkp01m-ebsd ~]# ps -ef | grep ob
root 15119 3942 0 18:17 pts/0 00:00:00 grep ob
This is the output of sg_map command.
[root@prsabkp01m-ebsd ~]# sg_map -i -x
/dev/sg0 0 0 0 0 8 HP MSL6000 Series 0520
/dev/sg1 0 0 0 1 1 /dev/nst0 HP Ultrium 3-SCSI G65W
/dev/sg2 0 0 0 2 1 /dev/nst1 HP Ultrium 3-SCSI G65W
/dev/sg3 0 0 0 3 12 HP NS E1200-160 5687
/dev/sg4 0 0 1 0 12 HP NS E1200-160 5687
Edited by: user12199230 on Nov 17, 2009 12:38 PM
Edited by: user12199230 on Nov 17, 2009 3:14 PM
Edited by: user12199230 on Nov 17, 2009 3:18 PM

How do you mark a section from the timeline to send to Compressor 4 using Final Cut Pro X?

I am trying to send just a certain piece from the Timeline to Compressor 4 using Final Cut Pro X and I can't figure it out. Please help!

jakelovesanna wrote:
The video itself is intirely 5 minutes, but the timeline goes to 24 hrs.
24 hours?
If you select the timeline and press Shift+Z do you see a lot of black space in the timeline? If so, you may have a huge gap clip (although I fail to understand how you achieved it). Click on it and if it can be selected, delete it with the Backspace Key (next to the = key).
Then press Shift+Z again.
If I've got this wrong, can you post a screen grab of your timeline?
Andy

Can the recording you make from the Dictaphone App be transcribed directly to your ipad?

can the recording you make from the Dictaphone App be transcribed directly to your ipad?

No it appears to simply be an audio recorder from the description in the App store.
You could try out Dragon Dictation as it scribes as you record.

Audio won't play in the Viewer but will in the Canvas from the timeline.

If I select a clip from the timeline to open in the viewer, I cannot hear the audio even though both video and audio are selected. This only happens in certain projects. Anyone know why?

In the View menu, make sure the Audio Playback is set correctly.

When I export from the timeline in Final Cut Pro HD, I get a general error message

When I export from the timeline in Final Cut Pro HD, I get a general error message and the export quits. Any ideas on a fix?

Also, if I remember correctly, Final Cut Pro HD was version 4.5. Is this what you are running?
If so, what version of OSX and Quicktime are you running?
x

Next button in symbol, start animation from the timeline and after 3 sec playReverse

Hello,
I have a next button in a symbol. When I click on the button I would like to start the animation from the timeline.
It wil starts at one second. But if the timeline is after 3 seconds I would like to play the animation backwards (if you click on the same button).
I tried it with the code below but it starts always at 1 second.
var pos = sym.getPosition() //
if (pos <= '1000'){
sym.getComposition().getStage().play(1001);
else if (pos <= '3000'){
sym.getComposition().getStage().playReverse(2999);
Can anybody help me with the code?
Thanks!

Hello,
Thanks for the demo file, I checked it, tried it in my project and it works.
But I think I have to explain better.
I have a button in the symbol. When I am between 0 and 1 second on the stage timeline
and I click on the button. The stage timeline (slider) will start from 1 second till 2.
But when I'm in the timeline after 3 seconds (doesn't matter if its at 10 sec) and I click on the button,
I would like to play the stage timeline from 3 seconds till 2.
Is this possible and how do I do that?
Thanks

How do I completely remove a clip from the timeline?

I just bought a mac pro and final cut pro x to go with it (after a couple of years of being used to using adobe on a pc) so apologies if this sounds like a stupid question, but how do I completely delete/remove a clip from the timeline instead of merely 'disabling' it?

If you have a keyboard without the numerical keypad, then FN delete will delete the clip and replace it with a gap if it's on the primary storyline. If it's a normal Mac keyboard, then the back delete will do the trick.
You can also lift a clip from the primary storyline by right-clicking and choosing lift from primary storyline, then just delete.

Does Premier Elements allow me to record video streaming from the internet?

Does Premier Elements allow me to record video streaming from the internet? If so which version and how?

kc42k
Although Premiere Elements is not going to record streaming video from the Internet but there are other programs that can, you should consider the terms of service for the web site that is the source for the streaming video.
Online, there are very comprehensive articles on numerous programs that will do the recording.
But, even those articles point out that many of the Internet web sites that you target for their videos have terms of service that would legally prohibit the recording of streaming video from the named web sites, one example, YouTube, if no download button and depending on the terms of service.
Please consider. Any questions about the above, I can point you to the appropriate documentation on the matter.
Thank you.
ATR

No playback from the timeline.

What is up with Premiere Pro CC 2014 today? It was working just fine after the update and now I get no playback from the timeline. And I can't preview my edits on clips. Is this a recent issue? It seems I'm not the only one with it.
[Please choose only a short description for the thread title.]
Message was edited by: Jim Simon

VIEW>Video Playback>Digital Cinema Preview.
Then VIEW>External>All frames. Or CMD-F12.
Shane

Crystal Report Alerts not firing when no records are fetched from the DB

Hello,
The crystal report alert i have created in the report in the event of no records being fetched from the query is not firing. The condition used is isnull ( count(DB Field ) ).
Is there a limitation with alerts that they would be fired only when some records are fetched in the report.
Appreciate any pointers
-Jayakrishnan

hi Jayakrishnan,
as alerts require records to be returned here's what you will need to do:
1) delete your current alert
2) create a new formula with syntax like
isnull(DistinctCount ()) or DistinctCount () = 0
3) create a new Subreport (which you will put in a report header)
4) the subreport can be based off of any table
5) have the subreport record selection always return only 1 record...for performance reasons
6) change the subreport link to be based on the new formula
7) the link will be a one way link in that you will not use the "Select data in subreport based on field" option
8) now in the subreport, create the Alert based on the parameter created by the subreport link
i have tested this and it works great.
jamie

Why does iMovie stop importing my tape from the camcorder even though it says it is still importing?

Why does iMovie stop importing my tape from the camcorder even though it says it is still importing?

It's difficult to be sure without doing some network packet sniffing, but if it were another app syncing, it would be an awful coincidence, since it seems to happen only while I'm in Reminders.app -- as soon as I click the home button and go back to the home screen, it stops; when I launch Reminders again, it starts again.
Moreover, it happens when I am not in the house, which rules out iTunes syncing.
Note that it's not the syncing spinner (i.e. two arrows chasing each other in a circle) -- it's the data access spinner (like the wait spinner in many apps and the apple.com search box).

Recording to tape from the timeline

Similar Messages

Maybe you are looking for