Recording tv programs on-line

I am trying to record tv shows on-line. I go to tv listings and click on a show but the 'record' and 'record series' buttons do not appear. I just installed FIOS 3 days ago with DVR service. Do I need to activate or register the DVR somewhere?
Thanks

Yes under the main menu, FiOS TV Remote DVR, Web Access.

Similar Messages

MessageTransformBean - SimplePlain2XML - Multiple records on a single line

Hi,
I am trying to convert multiple record from a single line to multipe rows in an XML message with the MessageTransformBean.
If the record look like this it's working:
RECORD1textETC
RECORD2textETC
But the incoming message are all on a single line:
RECORD1textETCRECORD2textETC
Is there a way to add a linefeed to my incoming message after X characters, or to tell the adapter to split by length instead of spliting on the end of line?
Thanks,
Martin

I had to code a custom Module Adapter to do it.
Here's the main part of the module adapter EOLConvertBean...
Message msg = (Message) inputModuleData.getPrincipalData();
XMLPayload xmlpayload = msg.getDocument();
byte[] content = xmlpayload.getContent();
byte crlf = 0x0A; // end of line char
int current = 0; // current bytes read
ByteArrayOutputStream baos = new ByteArrayOutputStream();
int lines = content.length / recordLen; // record len = insert EOL after X recordLen
// TODO change for do while for 1x line record
for (int i = 0; i <= lines; i++) {
     baos.write(content, current, recordLen);
     baos.write(crlf);
     current += recordLen;
xmlpayload.setContent(baos.toByteArray());
inputModuleData.setPrincipalData(msg);
Edited by: Martin Lavoie Rousseau on Oct 6, 2010 9:08 PM

Displaying of 2 records in a single line in report

Hi Experts,
I have PO item data and PO schedule line items being stored in a Cube.
I developed a report which is a combination of fields from both the datasources. so i am getting 2 records for the same line item Of a purchase order.Now my requirement is to Display the line item details in a single line.How can i achieve this.
please help me Out in sorting this issue.
thanks in Advance.
Regards,
Sandeep

Hi
make sure you have proper common fields or matching fields in both datasources.
Regards
Sudeep

Capture recorded tv programs on my sky+ with imovie

Hi
I have a sky+ (pvr) box which has a function to allow a dvd recorder to record programs on it's hard drive. From what I can see the box simply plays them for the dvd recorder to record.
My question is this - is it possible to wire a sky+ box to my mac to record the program to my hard drive to the import into imovie?
I would have to use an RF cable so any advice on necessary hardware would good too.
Hope you can help!
Mark

I believe iMovie only supports direct importing of video via Firewire from a camera capable of machine control from that output. I think you would have to capture the video from your sky thing, with something like Snapz Pro, then convert it to a compatible format for iMovie, but by that time, you may not need to import it into iMovie if your intention is to simply capture the video for viewing on your Mac.

NiScope EX Multi Record vi program

Hi,
I have a question in niScope EX Multi Record.vi program. I was not explaining it well in my previous mail. That is why people can not answer my question. This time, I will explain clear.
Attached "abc" is my prgram with niScope EX Multi Record.vi prgram. This is my question. How come I can not get the waveform when I do the same action in the seond time? Here is how my prgram work. First, I press "reset" push button, the light will go off and press it again the light turn off. The prgram do nothing, just reset the value of the voltmeter and current meter. Second, I press the "enable" button, the voltmeter and current meter get reading since I have a subprgram under timeout in the event structure. Then, I press the "enable button" again to turn on the light. Third, I press the "bark button", my hardware will be shocked and output waveform, since I have a subprogram, niScope EX Multi Record.vi, I set the right parameter, I will get the "shock pulse waveform".
Everything looks good and working. Then I press the "bark" push button again to turn the light off. I want to do the same action the second time to see if the waveform of niScope EX Multi Record will generate again because normally I tried the same action the second time. the waveform will generate again. Here I am talking about I use the niScope EX Multi Record.vi prgram without anything and event structure and I did the same action as what I said in the above procedure. But, I did the same action in the second time in this "abc" vi program with niScope EX Multi Record. vi prgram, I could not get a new waveform, I don't understand why? could you please tell me what I did wrong? my niscope EX Multi Record.vi prgram is out of the event structure, what I see is like this prgram is alone just like the one I tried without event structure before. I am not sure if this single prgram mixed with event structure, it will be what? will it be different like I put two subprgrams in one block diagram even though I tried two subprgram put it together and it will work what it suppose to do. I am not very sure if ni scope EX Multi Record.vi prgram mixed with other prgrams with event struturem, what will happen? Will it be the same like two subprgram put it together? Could you please tell me exactly what if I put niScope EX multi record.vi with event structure including another program, what will happen? I would like to understand.
Attachments:
abc.vi ‏227 KB

Hi Nyborn,
The changes of the graph color are controlled by the Waveform Graph property node on your block diagram. In the niScope EX Multi Record.vi example the Plot.Fill/PtColor value of the waveform graph property node is connected to a random generating number which changes the color on every execution. If you want to assign just one color, remove the random number vi and just wire a acii constant for the color you'd like. You can find listing of all acii color codes here.
I hope this helps.
Regards,
Natasa

Playing back Recorded TV Programs using Windows Media Player and only hearing Sound from Front Speakers

Hi All,
I have Windows 7 Ultimate 64-Bit Service Pack 1 with Windows Media Player 11 installed.
When I click on one of my Recorded TV Programs to watch and hear, I can only hear the Sound coming from the Front Speakers.
When I right-click on the Program and open it up in Real Player Cloud. I can indeed watch the program and hear Clear Sound coming from all 5 Speakers plus the Subwoofer.
What setting do I change to use Windows Media Player and have sound coming from all 5 Speakers and the Subwoofer?
Thank you!
thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

Hi Andreas,
Thanks for the reply.
The link you put up, takes me to the page, but
"The requested URL /surround/www_lynnemusic_com_surround_test.wma was not found on this server."
That was WaterFox.
The webpage cannot be found
This in Internet Explorer 11.0
The Files in question were Recorded by Beyond TV to my Local Hard Drive.
When I open the recording in Real Player Cloud, installed on my computer, not streaming over the Internet, I hear it correctly played.
When I use Windows Media Player, nothing can be heard from the Rear Speakers.
Speakers and Hardware are working fine.
thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

I frequently use Lightroom 3.6 for tethered capture on location. If I sign up for Adobe cloud and upgrade to Lightroom 5, do I have to be online all the time to use it? In other words, can I still use the program off-line?

I frequently use Lightroom 3.6 for tethered capture on location. If I sign up for Adobe cloud and upgrade to Lightroom 5, do I have to be online all the time to use it? In other words, can I still use the program off-line?

Yes.
The only difference is the installation method and the ownership verification. The program still is installed on and runs from your local machine. You only have to hook up to the internet every 60-90 days to verify ownership.
From the FAQ
Do I need to be online to access my desktop apps?
No, the desktop applications in Creative Cloud, such as Photoshop and Illustrator, are installed directly on your computer, so you don’t need an ongoing Internet connection to use them.
An Internet connection is required the first time you install and license your apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
Annual members can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode."

Does anyone know if Apple has any plans to create an electronic medical records (EMR) program? And if not, who do I email to suggest just that as a new market in desperate need of some new innovation?

Does anyone know if Apple has any plans to create an electronic medical records (EMR) program? And if not, who do I email to suggest just that as a new market in desperate need of some new innovation?

There already are some tools in the App Store (eg. My Medical - https://itunes.apple.com/us/app/my-medical/id347860026?mt=8).
If you mean something that would interact directly with a Hospitals main system or such, I don't know of any. There are numerous companies now selling and setting up central records systems around the country, but I don't know of any that are working on companion patient tools yet.
Some charity and non-profit companies, like MedicAlert Foundation are working on such things and may have mobile apps on their radar, as funds allow them to develop such thing. MedicAlert already offers an EMIR service online, but no standalone mobile app for it yet (you manage it via their web portal).
Epocrates (owned by Athena Health) might also have something in the works, or at least an interest in such a thing.

TX BDLS - Syntax error in program SBDLS21020100127145818 line SELECT SINGLE

Hi All,
I am in the process of configuring a QAS system taken from a copy of th production system, I am going into TX BDLS and getting the following error message Syntax error in program SBDLS21020100127145818 line SELECT SINGLE AWSYS FROM DFKKKO has anyone got any ideas about this issue?
Thanks
Jay

Force manual activation in se11 this tables: (SE11 -> display -> menu 'table' -> actívate)
DFKKKO
DFKKCOLFILE_P_W
DFKKMKO
DFKKREP06
DFKKREP06_S
DFKKREP07
DFKKREV06
DFKKREV07
Try again the BDLS.
Regards.

Who uses his Mega 180 to record TV programs

Hello there,
I just placed my order for the Mega 180.
One feature that interesses me is the recording capabilities in combination with the MSI TV card.
I read somewhere that you can program the mega 180 to start recording a TV program.
Another feature that interesses me is... can you for example browse images/picture with only connected to a TV screen and not a computer monitor?
Thx,
Koen

Hi Koen,
I too have just ordered the MEGA 180, and received the base unit. According to the users manual the MSI media software will allow you to record TV programs, with the optional TV tuner, time shift, ie buffer record for quick review, and also set scheduled events for recording. Goto the msi.com.tw website and download the manual while you are waiting, and do some interesting reading. I hope to use the unit as a PVR [personal video recorder] just like the new Panasonic Digital Video Recorders can do.
As far as the viewing of pictures, the manual on the Media Software indicates that this is possible using the Full Screen option [ viewable from across the room] to play a slide show [with/out music] play media files, even possibly stream them to another workstation. Proof is in the pudding!
If only 1/2 of the claims work out, I'll be happy.....
Regards.....
Larry

Can't Record Specific Programs/Channel

I've had FIOS TV for less than 2 weeks. I try to record some programs on WUSA 9 (CBS, in DC) and get a message "DVR Alert - This program can't be recorded.) Is CBS blocking this capability? Is this a by product of the Dish hopper issue? or do I have a unique problem. Haven't been able to find any reference to this issue on the internet.
Thanks,
JG

Hubrisnxs wrote:
what model set top box do you have. This sounds real wierd.
Maybe try a DVR auto correct.
Click dvr and there should a fix dvr functionality feature.
MENU > CUSTOMER SUPPORT> In-Home Agent.
A few options that might help..
-Set-Top Box Auto Correction
-Auto-Fix MRDVRY issues
-Reboot STB

Record tv programs

What can i buy at Best Buy if I would like to record tv programs without a subscription?
I have a PC laptop and a verizon set-top box . I would need either a tuner usb card or dvr.
The
Hauppauge - PCTV HD Stick USB 2.0 TV Tuner with PVRsold at best buy- i was told by the manufacturer Hauppauge
does not change channels.

dustinjohnson wrote:
Did you ever get an answer to your question? It sounds like we are in the same situation. We currently have satellite service, but don't want to pay for the dvr equipment and service. We are hoping to find some way to use a pc with a hauppauge card to solve the problem, but are having trouble finding anyone that knows enough to answer our questions and explain things to us. Thanks!
Welcome to the forum, dustin.
It may be possible with an analog connection from the Direct TV box to a capture card. Quality will be moderate to poor. Digital copies are not possible for reasons that should be obvious. The Hauppauge unit you speak of will not help you.
Disclosure: Former BBY employee.

Recording two programs whilst watching a previousl...

Until a few weeks ago I have been able to record two programs AND watch a previous recording without difficultly. Now, for example, if I have set up two recordings to start at 9pm and before that time I start to watch a recording come 9pm the recording I am watching stops and I get the black screen with the blue 'continue' box. I press continue and it just keeps popping up. (This would have happened previously but as soon as I pressed 'continue' the recording would indeed continue). Now if I want to continue watching the recording I have to go in and delete one of the recordings that has just started. I hope that all makes sense! It is really annoying and I don't understand what has changed to make this happen? anyone got any ideas?

How annoying is that. I haven't cone across this myself has anyone else?
I hope it is not another "feature"
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

LSMW Recording source program editing

Hi All,
Can we edit LSMW recording source program so that i can implement program logic? if so how can we do that.
Thanx,
GUNA

Hi Guna,
U can edit source program (but remember whenever u r executing the program its get changed), so my sincere request is dont go for that.
and if u want to write any logic best method is go for Mapping step(5th step)
in that there is Display variant icon , press that
u find pop-up screen in that check bottom three boxes and enter,
afterwards u find functions where u can write logic there what ever u want as per the requirement.
Reward for useful answers.
Thanks
Naveen khan

Placing multiple records on a single line (variables)

Post Author: AeroProg
CA Forum: Formula
Hi, I am new to Crystal Reports, but I know Basic and other programming. I have Crystal Reports XI and am pulling data from our ERP/MRP system, Epicor Vista (Progress DB).I've been asked to figure out a Crystal Reports for our company (I get thrown into these projects). I know what the report should look like and I know how I would go about some VB code in a macro in Excel if all the data was in worksheets(i.e. like tables).Below is the data. Any help would be SO appreciated. So far I'm loving Crystal Reports and I can't wait to get some reports our company can start using but I'm stuck on understanding the timing and connection of formulas with the records.Table1 "JobMtl"Field "JobComplete":StringField "JobNum":StringTable2 "JobOper"Field "OpComplete":BooleanField "OprSeq":Number{JobMtl.JobComplete}FalseTrue{JobMtl.JobNum}20102011{JobOper.Complete}FalseTrue{JobOper.OprSeq}10203040Let's say I dragged all 4 fields into a report. It would look like this.JobNum JobComplete OprSeq OpComplete2010       False          10          True2010       False          20          True2010       False          30          False2010       False          40          False2011       False          10          True2011       False          20          False2011       False          30          FalseI would it to read like thisJobNum JobComplete PrevOp CurrOp NextOp2010       False          20          30        402011       False          10          20        30**Note: {JobMtl.JobComplete} will be used so I am only reporting jobs that are "not complete". I guess it means nothing to you guys, but I put it here because I was not sure if this will be involved in a formula.Thanks,AnthonyMy email is ls1z282002_at_yahoo.com (replace "_at_" => "@") if you would a *.RPT with the data I've shown.

Post Author: GraemeG
CA Forum: Formula
I don't know if you can attach files... if you can I'll attach the sample. In the mean time, here's the rub...
(By the way, I use basic syntax in my formulae... old habits and all that!)
I created two tables (actually they were two sheets in a spreadsheet) called JobMtl and JobOper and put some records in in the format AeroProg described above.
Create a formula called aResetVariables:
'Define shared variables
shared CurrOpNo as number
shared PrevOpNo as number
shared NextOpNo as number
'Set Variables to zero
CurrOpNo = 0
PrevOpNo = 0
NextOpNo = 0
'This next line is just to keep Crystal happy
formula = 0
Create one called bCurrentOp:
'Define shared variables
shared CurrOpNo as number
shared PrevOpNo as number
shared NextOpNo as number
if CurrOpNo = 0 and {JobOper_.JobComplete} = "false" then
    CurrOpNo = {JobOper_.OprSeq}
end if
formula = CurrOpNo
Create one called cPreviousOp
'Define shared variables
shared CurrOpNo as number
shared PrevOpNo as number
shared NextOpNo as number
if {JobOper_.OprSeq} < CurrOpNo or CurrOpNo = 0 then
    PrevOpNo = {JobOper_.OprSeq}
end if
formula = PrevOpNo
Create one called cNextOp
'Define shared variables
shared CurrOpNo as number
shared PrevOpNo as number
shared NextOpNo as number
if {JobOper_.OprSeq} > CurrOpNo and CurrOpNo <> 0 and NextOpNo = 0 then
    NextOpNo = {JobOper_.OprSeq}
end if
formula = NextOpNo
In your Crystal report, group by the JobNum and put the aResetVariables formula into the group header. This will make sure that the variable are set back to zero every time the Job No changes. Suppress the group header.
Plonk what ever you want into the detail line but suppress that too.
Put the JobNum, JobComplete, cPreviousOp, bCurrentOp and dNextOp formulae into the footer. (Donu2019t suppress this section!)
Run the report and you should get a line for each job showing the previous, current and next operation. If you tinker with the status' it seems to work everything out okay.

Recording tv programs on-line

Similar Messages

Maybe you are looking for