Recording TV shows on my computer

Here is my computer:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03135882&lc=en&jumpid=reg_r1002_us...
I don't know what I need to record and store/save TV shows on my computer. Also, which TV tuner is the best, brand wise? If I were to install an internal tv tuner, can the tv tuner also record/save digital tv broadcasts? My cable and internet service provider is Cox. I press the "Display" button on the remote and this is came up: "QAM". I don't have a set-top box/DVR/cable reciever. I only have digital cable. Please help. Sorry if I'm not making any sense. Thanks!

Jack, welcome to the forum.
Here is the brand of TV Tuner that I recommend.  I quickly read through the literature and it appears that all of them will record to your computer.  I suggest reading about each one to see which will work best for you.  Once you have made your choice, it would be good to contact Cox Customer Support to make certain that it will work with their equipment.
Please click "Thumbs Up" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

  • I have an earlier generation of Apple TV, one with a hard drive.  I just recently purchased a movie thru iTunes.  When syncing the atv with iTunes the movie is not recording on my computer drive.  Also, just noticed that my recently recorded tv shows are

    Old aptv is no longer syncing purchased movies and tv shows with my computer.  well it syncs, but does not record the movie/tv on the computer hd.  Is this a matter of obselesence of is there something I can do to restore the backup?

    I disabled all my computer's firewalls and sure enough, IT WORKED!! My iPod is updated and just now finishing restoring! Thank you SOOOO SOOO much. : D

  • Recording TV Shows directly from cable...

    With Windows Media Center, I was able to hook my cable up directly to my computer and record tv shows for later viewing. Am I able to do the same with Apple TV? Or does it only allow me to purchase tv shows?

    Depends on what you mean by "used in conjunction with".
    http://www.equinux.com/us/products/tubestick/appletv.html
    The ATV should play any mpeg4 content iTunes can load. it appears that the TubeStick can record a Mac and export in an ATV friendly format for later syncing.
    I don't think it is possible to record directly to the ATV.

  • Import button to import recorded tv shows missing?

    I record shows with EyeTV on other networked computers in my house.  I can watch the shows, but I can't import them from one of the other Macs.  When I see the shared shows on that computer there is no import button.  On a third Mac I have recorded shows.  When looking at that shared library I see in the lower right corner and import button.  Why does one allow me to import and the other Mac doesn't?  The main Computer is now running  Yosemite .  The other computers are Mac Minis running 10.6.8.  The one that I can import from is shared over a ethernet and the non-importing machine is over wireless network connection.  Syst Pref allow sharing on the machines and iTunes preferences allow sharing.

    I figured it out I think.  The computer that would not allow me to import from was not an Authorized Computer (iTunes > Store > Authorize).  I had too many devices authorized so I deauthorized them all first and then authorized the devices I use most often including the computers that are doing the EyeTV recordings.  Now the "import" button appears on the shared library lists.  Problem fixed, I think.  I love it when I answer my own questions, but then again others might benefit from my learning and sharing.  Cheers!

  • DVR stops recording before show has completed

    I occasionally record a PBS TV show from my computer to my DVR box. When I watch the recorded show, the recording stops before the show has ended and I miss the ending of the program I have recorded.

    brorrell wrote:
    I occasionally record a PBS TV show from my computer to my DVR box. When I watch the recorded show, the recording stops before the show has ended and I miss the ending of the program I have recorded.Comcast has no control over when networks start or stop shows...  you can begin the recording earlier and stop it later if you so desire.... -=Ray=-

  • IPod Touch 1st Gen is showing up in Computer but not in iTunes

    I recently updated to iTunes 10.3 I didn't try to sync my iPod immediatly though so I didn't notice this problem until just now. I went into iTunes to sync my ipod and the ipod would show up in Computer or in iTunes, I uninstalled it and downgraded to iTunes 10.2, then my iPod would show up in Computer but still not in iTunes and in Computer it said it was and "Apple iPod" instead of "<My Name Here>'s iPod Touch". Just now I updated to iTunes 10.4 and it iis still showing up in Computer as "Apple iPod" but it isn't showing up in iTunes.
    I don't know if this will effect anything but I am running Windows 7 Home Premium.

    Would someone please at least give me some advice like microwave my laptop or something?

  • Purchasing Cube -- 0PUR_C01.. "Added record" is showing zero in request

    When i try to load the data to this cube, my trasfer record is showing values while Added Record is showing zero values. Whats the problem. Please advise !!

    Hi,
    Check whether do you have defined the industry sector in R/3. This has to be done before filling the setup table. search the forums with note no 353042.
    This is done with the help of Transaction MCB_ which you can find in the OLTP IMG for BW (Transaction SBIW) in your attached R/3 source system.
    Here you can choose your industry sector. 'Standard' and 'Consumer products' are for R/3 standard customers, whereas 'Retail' is intended for customers with R/3 Retail only.
    You can display the characteristics of the process key (R/3 field BWVORG, BW field 0PROCESSKEY) by using Transaction MCB0.
    If you have already set up historical data (for example for testing purposes) by using the setup transactions (Statistical Setup Programs) (for example: Purchasing: Tx OLI3BW, material movements: OLI1BW) into the provided setup tables (for example: MC02M_0SCLSETUP, MC03BF0SETUP), you unfortunately have to delete this data (Tx LBWG). After you have chosen the industry sector by using  MCB_, perform the setup again, so that the system fills a valid transaction key for each data record generated. Then load this data into your connected BW by using 'Full update' or 'Initialization of the delta process'. Check, whether the system updates data into the involved InfoCubes now.
    If all this is not successful, please see Note 315880, and set the application indicator 'BW' to active using Transaction 'BF11'.
    Regards,
    Anil Kumar Sharma .P

  • When I connect my ipod to computer and open itunes, the songs on my ipod do not show up on the itunes library...it is blank...songs are still on my ipod but don't seem to show up on computer..help??

    When I connect my ipod to computer and open itunes, the songs on my ipod do not show up on the itunes library...it is blank...songs are still on my ipod but don't seem to show up on computer..help??

               Download this for getting media off your ipod!http://www.macupdate.com/app/mac/19890/ipoddisk
    Hope this helped!

  • Credit master records are showing the wrong credit exposure?

    Hi,
    Some credit master records are showing the wrong credit exposure and therefore orders are being credit blocked when they should have been approved.
    The problems occur after the credit limit has changed in the credit master record
    Please Help.
    Regards,
    Chamandeep

    Dear Chamandeep,
    Trust you have reviewed the open documents that would constitute to credit exposure, and have turned a blank.
    In such cases, it is possible to reorganise the credit master data of customers by using the programmes RVKRED77 and RVKRED07.
    Kindly prefer the latter as it permits greater flexibility especially in selection of dates of data reorganisation.
    In either case, the data  re-organisation is resource intensive and is best run when all other users are cleared from the system.
    Regards,
    K Gopidas

  • Records Not Showing Up On Report

    I'm using Crystal XI
    I can take the query from "Show SQL Query..." and paste it into a query screen in SQL Server 2008 management studio and retrieve the correct records.  However, the report itself does not contain all the records the should have been returned.
    To the best that I can figure, the records where a transaction date (date/time field) is null is not showing up on the report.  I only display the field, do not do any calculations based on the field. 
    It is part of the record selection formula, where I test for the field to be between start/end parameters or is null (which produces the correct SQL query as I stated above)
    So why are the records not showing up on the report, and more importantly, how do I get them to show up?
    TIA

    It already was set to "Exception for Nulls"
    On the other hand, just on a whim, I tried reversing the order of the query from what it was:
    {MyQuery.Company = {?Company}
        And
        {MyQuery.Transaction_Date} In {?Start/End Date}
        Or
        IsNull({MyQuery.Transaction_Date})
    To:
    {MyQuery.Company = {?Company}
        And
        IsNull({MyQuery.Transaction_Date})
        Or
        {MyQuery.Transaction_Date} In {?Start/End Date}
    And that seemed to work.  I'm not sure why it will work in the Mangement Studio, but not in Crystal Reports, but at least it works.
    Thanks for the tug in the right direction.

  • My iPod nano g7 isn't showing up on iTunes although i plug it in. it shows on the computer but not on iTunes. also it won't sync , accept new songs and doesn't  put on podcasts. it is new, i got it for christmas. PLEASE HELP

    my iPod nano g7 isn't showing up on iTunes although i plug it in. it shows on the computer but not on iTunes. also it won't sync , accept new songs and doesn't  put on podcasts. it is new, i got it for christmas. PLEASE HELP

    Hi avmary11,
    If your are having issues with your iPod not being recognized by iTunes (but it is being recognized by the computer), you may find the following article helpful:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    Regards,
    - Brenden

  • How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

    How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

    Photos that were synced from a computer won't show for copying to a computer. If you want to copy them back then you will need a third-party app on your phone such as Simple Transfer which can copy them off via your wifi network. But photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer (e.g. their dimensions might be different and their colours may look a bit different).

  • Why is Apple TV showing the same computer multiple times for Home Sharing?

    Why is my Apple TV showing the same computer multiple times for Home Sharing? Also have connectivity issues. Sometimes will lose signal.
    JonRod's music
    JonRod's music
    JonRod's music
    JonRod's music
    JonRod's music
    I recently updated to Yosemite and never had this issue before.

    I'm not 100% sure of the ins and outs, but it's some sort of known issue between Yosemite, Airport and wifi. All you can do is wait for a fix and keep restarting your equipment as and when needed, unless you have the ability to connect your Mac via ethernet.

  • How can I get my iTouch to show on my computer screen? What cable is needed and where I can get it. (Apple to female VGA)

    Trying to get my iTouch to show on my computer screen NOT A TV.
    Please help I think I need a female VGA to a apple connector anyone know?

    Media was moved via external hard disk, and I think I moved the iTunes Media folder after consolidating it.

  • Why isn't there an option to record future shows using the HD box linked to a Multi room DVR setup?

    I have a multi room DVR in my livingroom and HD boxes in my 2 bedrooms. Currently if you are viewing a program on one of the HD boxes you are able to record the live program you are viewing as the HD box will enable your DVR to record that show.
    Why hasn't FIOS enabled the settop boxes that are part of a multi room DVR setup to be able to record future shows? Needless to say, if I am lying in bed at night and see something in the program guide airing at a future date I really don't want to get out of bed and walk to the living room, turn on the TV and DVR and then program that new recording.
    If I have missed something and you can do this please let me know. Otherwise FIOS should add this to their customer's wish list and enable recording for future times on the HD boxes that are part of your multi room DVR system!

    You can already do that.  Highlight the show in the guide and press the record button.  You should get a pop up with the option to Set Reminder or Record on your DVR.   If it doesn't check your DVR to ensure that availability is extended to the STB you are using.

Maybe you are looking for

  • How to get the Query output to Excel

    Hi , Can you tell me how to get the Query output to excel with out using any third party tool? Can you tell me how to write the code in Webservice and call it.. Please explain it Elaboartly.. Thanks in Advance!!! Mini

  • How to create several fast loading big albums in iWeb using your own templates

    hi guys - here comes one for the real cracks. i am trying to create a nice PICTURES page containing about 100 albums with each of it containing up to 100 individual pictures on my website, where i also have several videos online and (soon) audio file

  • If I have Logic Pro 7, can I install it on a Snow leopard system?

    I may be considering buying a Macbook Pro and I want to upgrade to Logic 9. However i don't want to have to shewll out £400 if I can just install Logic 7 and then upgrade to Logic Pro 9 for £163. Please let me know if this is possible with Snow Leopa

  • Report builder doesn't connect

    Hi All, I ran into a problem where I can not connect the report builder and forms runtime to database. I am using oracle 10g 10.1.0.2.0 and forms and reports 6.0. and I am trying to connect through NT 4.0. I am able to connect to database through for

  • Javascript in Java Browser

    Hi! I would like to create a Java Browser who is able to deal with the Javascript. (Right now I see error messages). Is this possible? Please help.