Recording two different size windows into one timeline

Hello, I wonder if anyone can help.
I'm trying to capture two different size animations, one 900
x 600 and one much bigger, say 1280 by 700....How can I get them
into the same timeline? It seems captivate only allows one size
frame recording per movie.....
Any hints?
cheers
zig

Hi zig
The only way I can fathom this happening is to take Captivate
and record the larger. Then use the Project > Resize option to
reduce the size of the larger to match the smaller. Then import
that/those slide(s) into the smaller.
Or, you could go the other way around. Record at the larger,
leave it at that size, then import the smaller into the larger via
File > Import > Slides/Objects.
Cheers... Rick

Similar Messages

  • Combining two different Chart types into one graph

    Hi All,
      I am developing a graphical BW report using WAD. I need to place two differnt chart types into one graph.For example, I have Volume and Quantity .Here the volume should be displayed in Bars and Quantity should be displayed in Lines in the same graph. X axis(Country) is same for these two . I am not sure how to achieve this. Please do let me know if anyone has solution for this.
    Thanks for your time.
    Thanks & Regards,
    Raja

    Hi Andreas,
      One word I can say is 'Perfect' . Even though I am out of office now,I hope the example perfectly will solve my problem.I will try it.
    Thanks for Aduri and Pcrao also for their suggestions .
    Thanks again and I assigned points to all to say my thanks
    Regards,
    Raja

  • Two different clip settings on one timeline

    Hello All,
    I am combining clips shot with two different cameras on one timeline.
    For best quality results of the image, what sequence settings and then export choice should I use? It is a 4 min film that I would like to export as QT or MPEG-4 movie file.
    In FCP, both clips look crisp and sharp. I tried various export formats in compressor, but the output always returns the clips from camera 2 de-interlaced (the edges of objects are not smooth but zygzagy).
    Clip settings from camera 1:
    frame size: 1920 x 1080
    video rate: 23.98 and some in 29.97
    compressor: Apple ProRes 422
    Pixel Aspect ratio: square
    Field dominance: None and some have Upper (Odd)
    Clip settings from camera 2:
    Frame size: 720 X 480
    Video Rate: 29.97
    Compressor: DV/DVC PRO- NTSC
    Pixel Aspect: NTSC- CCIR60
    Field dominance: Lower (Even)
    Thank you for any suggestions,
    Izabela

    hazel - if you're making a DVD, then you're going to be using NTSC SD settings - so that's the "send to" compressor - and in compressor you will choose a DVD format, etc.
    But if you are creating a digital file to play from a laptop to a projector, I am suggesting you set your frame size to the most common pixel width of most projectors; 1024 x 576 precisely so you do not have to make any adjustments on the projector. You are basically running VGA out (or DVI) into the PC input of the projector and running a quicktime or wmv file and the projector will not have to re-map the image. All of my editing takes place on a mac, and quicktime is my fav but in the corporate world I often have to produce PC friendly files that they take and project with conference type LCD projectors. I do it all the time - this is a good way to go if you are in a similar position.
    On larger scale productions, we stay mac based and use high-end projectors and switchers, etc. But when you are handing your edits off to normal corporate meeting attendees they often try to embed them into powerpoint or at least run them in windows media players. If this is the case for you, then I am saying create custom frame of 1024 x 576 if your content is 16:9.

  • Compressing Different Sizes/Formats into One

    Hi everyone
    I'm trying to make a video out of clips from three of four different sizes and two formats (.mov and .mp4) into one video.
    The .mp4s are very small files, the .movs very large.
    Any tips to making the end video - smooth. I'm getting break ups and green screen in a couple places.
    Whole video is about a minute long
    Thanks

    Oh look at that... then once you have that you can create your Proxy Media.  i was just trying to figure that out myself.

  • Two different main windows in one form?

    Hello -
    I have a requirement to print a list at the end of an invoice printout.  The invoice can cover multiple pages, and the secondary list can also cover multiple pages, one page per material.  So essentially I need two different definitions of a main window.  I tried defining my form like this:
    Page...............Next Page.......Main Window
    FIRST..............FIRST.............MAIN
    LIST.................LIST...............MAIN_L
    The first part prints fine, but I can't get the second part to print.  I tried adding a command after the first main window to go to page 'LIST', but nothing in window MAIN_L will print.  All the secondary windows on page LIST print, but nothing from MAIN_L. 
    Then I tried changing MAIN_L to be a secondary window and I can see my data, but in this case it will not allow me to enter the command to start a new LIST page. 
    Help!  Is this even possible?
    Edited by: Susanna Kohlmyer on Aug 20, 2008 2:39 PM

    Try to create two Table Nodes in the Same Main window.
    Like:
    FIRST  ... next is FIRST
    .. MAIN
    .... TABLE1
    .......HEADER (table1)
    .......MAIN (table1)
    .......FOOTER (table1)
    .... TABLE2
    .......HEADER (table2)
    .......MAIN (table2)
    .......FOOTER (table2)
    Regards,
    Naimesh Patel

  • Data in two different coulmns merge into one column

    I am using following script to create external table with data.
    CREATE TABLE external_class(
    item_no varchar2(255),
    max_range varchar2(255)
    ORGANIZATION EXTERNAL
    TYPE ORACLE_LOADER
    DEFAULT DIRECTORY DATALOAD
    ACCESS PARAMETERS
    RECORDS DELIMITED BY NEWLINE
    FIELDS TERMINATED BY ','
    MISSING FIELD VALUES ARE NULL
    (item_no,max_range)
    LOCATION ('class_newc.txt')
    REJECT LIMIT UNLIMITED;
    Problem is that its merge both columns into one column.
    I want two seperate columns.
    Data is in microsoft excel spread sheet.
    I saved as txt(TAB DELIMITED) txt
    Data appears in clas.txt file as below:
    "400     "     4177.64
    "404     "     5574.64
    "406     "     5333
    "408     "     
    "409     "     
    "450     "     10.83
    "478     "     
    "482     "     4820
    I ran the above script to create table.
    Table Created
    SQL> desc external_class;
    Name Null? Type
    ITEM_NO VARCHAR2(255)
    MAX_RANGE VARCHAR2(255)
    SQL> select count(*) from external_class;
    COUNT(*)
    3036
    but with
    select * from external_class;
    ITEM_NO MAX_RANGE
    "400"4177.64
    "404"5574.64
    "406"5333
    "408"
    "409"
    "450"10.83
    "478"
    "482"4820

    thanks its work.
    Actually I created other file as below
    Item_no-----max_range
    400     4177.64
    404     5574.64
    406     5333
    408     
    409     
    450     10.83
    and use creation script as below:
    CREATE TABLE external_class(
    item_no varchar2(255),
    max_range varchar2(255)
    ORGANIZATION EXTERNAL
    TYPE ORACLE_LOADER
    DEFAULT DIRECTORY DATALOAD
    ACCESS PARAMETERS
    RECORDS DELIMITED BY NEWLINE
    fields terminated by whitespace
    MISSING FIELD VALUES ARE NULL
    (item_no,max_range)
    LOCATION ('class_newa.txt')
    REJECT LIMIT UNLIMITED;

  • Migration Jobs - two different SCCM sites into one

    Migration Jobs Question.  
    Migrating to SCCM 2012 R2.   I have two different Migration Source sites.    One is 2007 and one is a 2012 R2-Development.   Trying to merge both to one SCCM 2012 -Production site.        
    SCCM 2007  has been moved to 2012 Prod, now I'm looking to move 2012 DEV to prod.   Do I lose the ability to run "Objects modified after Migration" on the 2007 object data?
    As I understand, once I change the source hierarchy, all previous Migration Jobs are removed. 

    Hi Ronni
    When I add a new Source Hierarchy,  It looks like it removes the old.   
    So this is what I just tried:
    *Changed the Source Hierarchy to SCCM 2012DEV
    **Didn't rerun thought the whole process.  Noticed that the 2007 Hierarchy was removed.  Source Site Code 2012DEV,  
    Status Ready for next gathering Process"
    Then I:
    *Clicked "Specify Source Hierarchy" 
    **Noticed  that the 2007 was part of the drop down list
    previous Migration Jobs returned
    I guess the next step is to migrate a item from 2012DEV to 2012PROD and see what happens.  

  • Writing data from two different acquisition rates into one file

    Hi,
    I'm using a compactRIO, and I have an anemometer outputting data at 4Hz to the serial port on the controller, and I am using a 9237 module to read strain from two channels at 40Hz. I would like to record all this data in one file, but I'm unsure how to have the data points match up with respect to time since they are read at different rates. Basically I have 10 strain data points for every one anemometer data point, but that one data point needs to somehow be associated with the other 10 read in the same amount of time. It would be okay to "extend" the slower data to the 10 strain points, and likewise to the next ten when the anemometer refreshes its values.
    Thanks for any input!
    Andrew

    Check out the Queue multi-plexer vi from the examples.  C:\Program Files\National Instruments\LabVIEW 2009\examples\general\queue.llb\Queue Multiplexer.vi
    If each data acquisition loop enqueues data to one file writing loop the data is writen in order.  Queues are really a good way to multiplex data sources 
    Message Edited by Jeff Bohrer on 01-29-2010 09:44 AM
    Jeff

  • Combining two separate libraries (with two different Apple IDs) into one

    My fiance is moving in this weekend, and we hope to get rid of her computer to make space. She has a fairly large iTunes library, some ripped from CD and about 100 purchased from iTunes. I want to move her library and combine it with mine on my computer. I've read through the help files for consolidation, backup, and moving libraries from one computer to another, but none seem to apply to this special case. Once we transfer her files, we plan to cancel her Apple ID account since it wouldn't be authorized on any computers anymore.

    Once we transfer her files, we plan to cancel her Apple ID account since it wouldn't be authorized on any computers anymore.
    You can't cancel the iTunes account.
    Besides, you still need it to authorize your computer to play the songs she purchased.
    To get the music onto your computer, just copy it over to yours, then File -> Add folder to library and select the folder whwenre you put the music.

  • Drag and Drop Swing Components between two different Application Windows

    Hi!!!
    I tried the Dnd feature using the DnD api. It was a simple test, where I ahd two different app windows each made up of a JLabel. One I registered as drag component and the other as a drop component. the drop componenet(JLabel) does not have any text making it invisble to the eyes. When I drag the other JLabel to the drop window, the drop JLAbel takes the text value. I was successful so far.
    But can I do the same for any other Swing component in a scenario where when I drag the component, the component should have physically moved into the other window.
    any help on this with sample code will be greatly apprciated.
    Thanks in advance
    Suja

    Ok I found the answer to your problem. If you download the tutorial they have the code there it's in one folder. I hope this helps.
    http://java.sun.com/docs/books/tutorial/

  • How to merge different comp track into one comp track?

    Hi
    I use logic studio 9
    I have recorded two different comp tracks for lead singing of project
    And now I have two different tracks with a lot of takes to choose from in each one of them
    I would like to merge the two into one comp track with all the takes so it will be easier to edit
    Is there any way to do that?
    By the way, there is no reason why I made 2 tracks for the same singing part. Now it seems to be a mistake...
    Thank you very much

    Hi
    Basically, you need to unpack one (or both) sets of Take Folders, and then merge the two together:
    Working on the basic assumption (for discussion purposes) that you have two tracks, each with Take Folders on them.
    Method 1:
    Select each Take Folder on track 2 and click-hold on the arrow top right of the folder. Choose Upack to new tracks. Carefully select the new regions and drag/drop them onto the Take Folders on Track 1.
    Method 2
    Unpack ALL Take  folders on both tracks, Select all the regions and use the Region:Folder:Pack Take Folder function to re-pack into a new Take.
    CCT

  • I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

    I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
    thank you!

    Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
    This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
    It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Express
    Click Edit in the smaller window that appears
    Click the Wireless tab at the top of the next window
    Click Wireless Options near the bottom of the next window
    Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
    Click Save, then click Update and wait a full minute for the Express to restart
    Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name.  2.4 GHz devices will connect to your "other" network name.

  • How do I combine two or more pictures into one?

    How do I combine two or more pictures into one?

    I found out how to do what I wanted and I'm giving my steps in hopes that it might help someone else.  I wanted to put several photos from a file onto a new blank image.  This is what I did.
    1.  Create a blank page.    File/New/ Blank File.   Put in the size.  I used 8x10.
    2.  Bring the photo  you want to use into Elements as you always do. It will list along the top next to the blank sheet.
    3.  Choose SELECT (top of screen)/ Select All.
    4.  Choose Edit/Copy   or Command "C"
    5.  Click on the Blank File.   Chose Edit/Paste  or Command "V"
    6.  Click on Image/ Transform or Command "T".  There should be a dotted line around your pasted image.  You can then move and adjust the image to how you want it.  When finished, press the check-mark on lower right of photo.
    7.   Repeat this with all the photos you want on the new blank file.
    8.  You will see on lower right of Elements,  the background layer and as many layers as you have photos.  These layers need to be permanently placed on the background layer. Go to Layers and press Merge Visible.  This will merge all layers to the background.
    9.  Save as and you are done.

  • Loading consolodated data from two excel files / cube into one infocube

    Hi Friends,
    I am receiving data from two sources:
    Source 1:
    Customer Product  Location                          Keyfig(Budget)
    C1            P1          L1                                     100
    C2            P1         L1                                      200
    C1           P2          L1                                      300
    Source 2:
    Product     Location                        KeyFig (Actual)
    P1               L1                                           320
    P2               L1                                           350
    I want to combinedata from two sources (or cubes) into one cube as follows:
    Customer      PRoduct       location          Budget            Actual
    C1                 P1                 L1                  100                 320
    C2                 P1                L1                   200                 320
    C1                P2                L1                   300                   350
    I tried by creating multiple data sources / infosources / transformations / updates rules and also tried with both DSO and cube. But the records are always getting updated as follows:
    Customer      PRoduct       location          Budget            Actual
    C1                 P1                 L1                  100                 320
    C2                 P1                L1                   200                 320
    C1                P2                L1                   300                   350
                        P1               L1                                           320
                       P2               L1                                           350
    Can you help me figure out if this is possible? If yes, how can I do it.
    Thanks a lot in advance.

    Hi,
    Please use the below approach.
    Load the budget data in ODS1.
    Load the actual data in ODS2.
    Create a ODS3 with same structure as ODS1 with additional key figure for Actuals,which will get data from ODS1. Here add a look up based product and location to populate actuals.
    Start Routine
    SELECT * FROM ODS2 into ITAB
    FOR ALL ENTRIES in SOURCE_PACKAGE.
    Transformation Routine:
    Read table ITAB  into WATAB
    with key location = <source_fields>-Location
    product =  <source_fields>-Product.
    If sy-subrc = 0.
    RESULT = WATAB-ACTUAL.
    ENDIF.
    -Vikram

  • How can I use the print module to print different size images on one large "canvas"?

    How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
    I was thinking the print module would do this automatically for me.

    You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

Maybe you are looking for