Recording unexpectedly stopped

p.s. I should have said in my new thread just posted, also as 'recording unexpectedly stopped', that the issue below refers to a recording made in GarageBand :
I was recording the first part of the Ring Cycle from the Proms this evening, from my radio tuner via a Belkin RCA Audio Cable into the 'audio in' port.
I selected a 'basic track' and set the tempo to 80 bpm. The broadcast was 2½ hrs long, and I understood 80 bpm should give me somewhere between 5½ hrs and 11 hrs, which should have been more than enough time.
However, about 2 hrs into the recording it suddenly stopped with a message something to the effect that the file capacity of 2GB had been exceeded.
But when I clicked the 'record' button again, it nevertheless continued to record.
The next opera in the Cycle is tomorrow afternoon. If someone could present a solution before then, I would be extremely grateful !

Thanks : the link you gave for sunflower in your previous post opened a completely different site to the link in your latest post.
I'm afraid your suggestions and what I read on the website are above my competence or comprehension
levels !
If I can't find a way round GB quitting with the message . . .
‘File size limit reached. Audio recordings are limited to a file size of 2 gigabytes. This recording has reached the file size limit. Recording will stop, and the recording up to this point will be preserved'
. . . . then I want an application that is as similar as possible in terms of connecting to a radio broadcast, recording, editing and saving to iTunes or burning to CD.

Similar Messages

All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

Are the songs playing whole in iTunes? if not download them again.
else read this Apple Support Article on your problem
Have a nice day!

How can I avoid this message and the crash that follows? -"the program has unexpectedly stopped working and will close"

I am working on some books that I have had no problem creating in Indesign and this week, I was doing something and got an error message and had the program crash while I was working on something and lose my unsaved work. It happens all of a sudden and has been frustrating. Thought it was an installation issue, but this also happens on the newest version of CS6.
The original files (“books”) were created in CS4.
What I’m doing is copying a template for the appendix that was established in the first book into all subsequent books.
Here is the process that I used on CS4 for the first 10 books –
1.       open a file that already has the completed new appendix.
2.       Open a file that needs the new appendix
3.       Select the appendix pages from the pages menu in the completed file and “move” them to the new file.
4.       Voila!
When I started using CS5 this worked for one book. Now the last book is giving me an error message during step 3. So, I select the pages I want to move and click “move” and then I get a message that says “the program has unexpectedly stopped working and will close”. This is the same message I got with CS6.

Same problem here. Firefox keeps freezing, sometimes for 5 minutes, then either starts working again really slowly or I get the plug-in error crash. This last time I copied what windows said about the error. This is the info:
Problem signature:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 1.9.2.3814
Application Timestamp: 4c12b3be
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6002.18005
Fault Module Timestamp: 49e03821
Exception Code: c0000005
Exception Offset: 00048b02
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: ca4b
Additional Information 2: 0db6cc4f646c2246ddf8a462e3add7af
Additional Information 3: 5b21
Additional Information 4: e5b7e758762c24b02e09abea0b4585f4
Don't know what it means or if it will help solve the issue, but thought I would share it.
All I know is that I am about to do something I never thought I would, switch to Chrome.

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

Good work, thanks for the report.

Sound recorder has stopped working on mini 210-1040

Sound recorder has stopped working after a HP maintenance check

Hi
Try doing a system restore to the date where unit was working fine.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

T4i Rebel error message "movie recording has stopped automatically"

I was recording my client when suddenly I got a this error message "movie recording has stopped automatically" and I could not record video anymore. I am recording on a class 10 sandisk Ultra card. 720/60, EFS18-135mm lens. Never had any problems in the past. First I get a small veterical meter on the frame and then after 5 secs the recording stops with this error message. Please tell me it is opeartor error...I have had this camera for 2 years now and never had a problem. I tried multiple cards.
thanks for the help,
DM

Either you or the person you spoke to at Canon was confused.
What the camera requires for video purposes is a card which is "at least" Class 6 or faster. The class designation is an indicator of the cards data transfer speed. Class 6 actually means the card is capable of transfering data (either reading or writing) at "at least" 6 megabytes per second. A Class 10 card can transfer data at "at least" 10 megabytes per second.
The T4i is also compatible with "UHS-1" cards... which are significantly faster than eithe Class 6 or 10.
The reason for requiring "at least" Class 6 has to do with how fast the camera is attempting to capture and save frames of video to the card. The camera actually has an internal memory buffer which is very fast. When you start recording, the data is being saved to that buffer... and simultaneously the camera also starts taking the data from the buffer and saving it to the memory card (which is slower). If the camera is recording video only slightly faster than the card can record, then it will actually take a few minutes before the buffer is completely filled. But at that point the camera has no choice but to stop recording because it has absolutely no place to save data ... the internal buffer is full and it can't empty the buffer because the memory card can't save data as fast as new frames of video are coming in.
Faster is always better.
Memory cards do actually wear out and develop errors over time. This is normal. A good card will re-map the bad blocks so they aren't used anymore... and this is why you should do a low-level format IN CAMERA (not using the computer). Good cards also have a "memory leveling" technology to try to use all the blocks roughly an equal number amount. This extends the userful life of the card.
When replacing the card, do not skimp on quality! I cannot emphasize that point enough. Most times when someone brings up this issue... it's the card that is having problems and not the camera.
It's easy to produce forgery cards which look like a good brand but are not. Buy GOOD cards from REPUTABLE dealers. Do not shop for the cheapest website on the Internet with a questionable reputation in order to save a couple of bucks.
Lexar brand and SanDisk brand are good.
When buying memory cards, I only buy cards from Lexar and SanDisk. I also buy their highest end cards (by speed performance... not necessarily their biggest capactiy cards). I buy the cards from dealers with a solid reputation. This avoids the unpleasant error messages which always seem to happen at the worst possible time.
Tim Campbell
5D II, 5D III, 60Da

Microsoft Date Picker control unexpectedly stops functioning in Outlook 2010

We have a long-standing Outlook VBA project that has unexpectedly stopped functioning with the error message "Object library invalid or contains references to object definitions that could not be found".
We have traced the problem to the 'Microsoft Date/Time Picker' control. We have successfully unregistered and re-registered both the MSCOMCTL.OCX and MSCOMCT2.OCX files in the C:\Windows\SysWOW64 folder with administrative privileges. However,
when using the free NirSoft RegDLLView utility, neither of the Microsoft common control files above shows as registered. Furthermore, if we try to use the NirSoft RegDLLView utility to register these files, we receive an unknown error
message, unlike the successful registration using the Windows Regsvr32 utility.
Can someone please help us understand why the files appear to register properly, but apparently are not actually registered?
Is there a way to scan these files for corruption or replace them with fresh versions?

Thank you for the reply, Amy. Being a novice and forced into this discussion by our malfunctioning Outlook 2010 project, we have a couple other questions, if you don't mind.
FIRST, both the common control downloads refer to users of Microsoft Visual Basic 6.0, Visual Studio 6.0., or Microsoft Office Developer XP. We don't own any of these standalone packages, so do we have them installed as a result of
being Microsoft Office 2010 users? There is never any mention of Office 2010 in any of the download descriptions or even other office suites.
SECOND, is one file an older file and the other a newer file? Neither shows requirements or makes mention of Microsoft Windows 7.0 (64-bit), which we are using. But the MSCOMCTL.OCX download does list required operating systems
up to Windows XP. Which do we need and why don't they refer to newer operating systems?
THIRD, the downloads also talk about discontinued support for Microsoft Visual Basic 6.0 and that the MSCOMCT2.OCX file is no longer included with Microsoft XP Developer. What is the significance of all this, these files apparently
shipped with our version of Microsoft Office 2010. What replaces these controls if they are out-dated?
As you can tell, we are advanced enough to dabble in some VBA projects, forms, and macros, but are totally confused by the mixed signals sent by these types of articles. If we want to continue developing projects how do know what path to
follow so we don't end up with antiquated controls or other outdated elements? Or, are these files really even outdated? Thank you for any enlightenment.

Icloud has unexpectedly stopped?? Can anyone explain this happens?

Every time i go to to icloud.com i only get the message "icloud has unexpectedly stopped" but in my wife computer it works just fine.
Anyone has any ideas why is this?
Thanks in advance.
Andre

Welcome to the Apple community.
Have you tried restarting your browser and trying again or clearing the cache from your browser and trying again.

TS4003 'icloud has unexpectedly stopped' error message when trying to login to icloud on my PC

I receive an error message that states "icloud has unexpectedly stopped" when trying to log into icloud.com on my PC. Any suggestions on how to fix this?

There are now several threads about this, all starting around 29th June
https://discussions.apple.com/community/icloud/search.jspa?peopleEnabled=true&us erID=&containerType=&container=&spotlight=true&q=Contacts+has+unexpectedly+stop p ed
This is clearly a problem with the service, not our browsers - any idea how to raise Apple's awareness of it?
I've clicked "I have this problem too" on the top four threads, I guess if everyone does likewise....

60-minute recorded program stops at the 49-minute mark

On Tuesday, our DVR (QIP2708)- recorded a regularly-scheduled show from 8:00 to 9:00. In the DVR's recorded programs, it showed as 59 minutes, 45 seconds (roughly). Watched the show until about the 49-minute mark, but the recording stopped abruptly and returned to the DVR menu. Hitting "resume playback" results in the last 2-3 seconds playing, then it just returns to the menu.
I tried fast-forwarding and skipping to the end, with no positive result. Once it gets to this 49-minute mark, it just stops, even though the progress bar shows a 59-minute recording. I manually reset the STB with no luck. Even tried watching on a remote STB but the result was the same. There's no error message displayed; the recording just stops.
It seems, just before the issue happens at the 49-minute mark, that the recorded program starts "skipping frames". I'd almost say that the video frames are "out of sync".
We had no power outage on Tuesday, and as far as I know, everything "FiOS" was working fine, as we were watching another program at the time this recording was taking place and we're constantly using a PC someplace in the house. I'm suspecting the recorded file is just corrupt, but I'm wondering if anybody else has seen this problem....?
I can go back and finish watching the show via the broadcast network's online library, but feel I shouldn't have to do that. I'm also wondering if this is indicative of a hard-drive problem in the DVR. (Certainly, if it appears more often, I'll request a replacement.)
Any insight greatly appreciated. Thanks!

Now is this the only program where you've experienced this issue? Can you test a few other programs and see if you get similar results?If the problem is on-going, then yes we can easily ship you out a replacement DVR. It's possible the channel had an outage and went off the air for a short bit aswell so could be a freak occurance.

HT4972 I can't update my iPhone 4s to iOS 6...it's showin error 3259....n unexpectedly stopping wen Download...please help me

I can't update my iPhone 4s to iOS 6...it's showin error 3259....n unexpectedly stopping wen Download...please help me

try turning off your pc anti virus and firewall. i use kaspersky and i always have to disable it when there is a new apple update other wise i get the same message... dont forget to turn it back on when your finished.

How do i resolve icloud has unexpectedly stopped

how do I resolve "icloud has unexpectedly stopped" on my pc?

Thanks for the reply. Sorry I wasn't clear the version is XI standard. And I did check for updates. The program is current. Still a few times a day the program will crash and my user will have to start over again on the document she is working on. Very frustrating for her and me.
The full error is:
Adobe Acrobat has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

Does anyone else get the error message :iCloud has unexpectedly stopped"?

I am visiting South Africa and realy heavily on access to my iCloud. For the past 48 hours iCloud seems to be down and I keep getting the error message "icloud has unexpectedly stopped". Apple has not acknowledged the problem, yet. Does anyone else experience similar issues? Any suggestions on how to access icloud.com?

I'm having the same problem on my wife's computer. I successfully joined several shared calendars from my account, and suddenly started getting this message on the last one. I've tried again repeatedly over the last 24 hours, including sending a new invitation, logging her out of iCloud website, etc.
Did you find any resolution to the problem?

Icloud has unexpectedly stopped

When I open www.icloud on my pc I receive the followind "icloud has unexpectedly stopped." How do I correct this?

Have you been able to fix this problem of getting "ICloud has unexpectedly stopped". I get it everytime I try to log in to ICloud on my computer. I do not have a problem using my daughters computer. They are both Windows based laptops and running Microsoft 7. I encountered this when we went to try and use the app find my ipod touch. It used to be Mobile Me but now on ICloud. Any help will be greatly appreciated. [email protected]

CME Live Recording Working but get a "Live Record has Stopped" message

Hi All,
I've configured Live Recording and its working perfectly.
However, when you press the LiveRcd button, you briefly get a message "Live Record has Stopped". (It does record the conversation and delivers it to my mailbox).
Is this normal?
Many thanks,
Ernesto
Cisco 2821 IOS 12.4(20)T
Cisco Unity Express 7.0.1

You might be hitting this bug:
CSCsq79034
Wrong Display while using LiveRcd softkey
Symptom:
If the call is active between phone A and phone B and phone A presses
the softkey LiveRcd , then the call is recorded however the display
says " Live Record has stopped" which is mis-leading to the users as
they feel the call is not recording but it actually is recording and
phone A gets a message after the call is disconnected.
Conditions:
its a cosmetic bug
Workaround:
Now if the call is active beween phone A and phone B and phone A presses
conference softkey and dials 9200 and presses conference softkey again ,
the call is recorded and phone A gets a message
HTH
java
if this helps, please rate

Recording unexpectedly stopped

Similar Messages

Maybe you are looking for