Recording using Aurora Igniter ... doesn't work

Hi Folks -
I have been trying to get STP to record with my Aurora Igniter card and it seems to hang immediately once I hit the record button. I get the first split second of what I am trying to record and then it just loops.
Does anyone have any idea what could be the problem here? I have downloaded the latest drivers from Aurora and I can record through FCP if necessary.
Thanks in advance for any help.
Eric

Aurora doesn't support simultaneous use of the built-in audio and the break out box.

Similar Messages

During video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

during video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

I know. Same issue here. When I'm not recording but have the video camera on, the autofocus works fine. As soon as I tap the record button and recording starts, the focus is locked until I tap on the screen to focus. I haven't used the camera all that much because of this problem.

Many programs I used to use in Tiger doesn't work in Leopard

Here are the ones I've noticed have not been working or have errors:
iMovie
iChat
Yahoo Messenger
Adium
VisualHub
There are probably like 10 more but I haven't seen it yet. Why are so many programs are acting like this. I was thinking it was becasuse it wasn't ugpraded enough but I did install the newer version and it doesn't work.

Well, haven't we had to deal with a slew of updates every two years?
And at least Vista x64 is probably more secure, supports EFI (UEFI 2.).
The same people that would need a Mac Pro (dual cpu, 8GB RAM, etc) would be looking at 64-bit.
Did not Apple tout the G5 from IBM as finally being a 64-bit system? But yes, even Adobe CS3 is still 32-bit and limited to 3.5GB of user space, which there are work arounds for.
One person I tried to help was using Maya but his version doesn't work with Leopard, and blames Apple and 10.5 it seems, rather than realize he needs to consider an 8-core system rather than 4-core, more memory, make better use of disk and RAID, and of course... upgrade software or... WAIT FOR MAYA AND 10.5.x to catch up to each other!
People assume you have to wait for SP1 for Windows, but think they should jump rigtht in, when we all have seen that X.3 is usually the first "sweet spot" in any release.

Two Finger Scrolling using track pad doesn't work.

You know how you can drag 2 fingers down the track pad to sroll down a page. Well, it doesn't work for me using Vista through Boot Camp. I tried the update, but it wouldn't install.
Is this as good as it gets?
Hypnoguy

Hypnoguy,
Sorry I haven't used boot camp for a long time my memory is a little fuzzy. Also note I used it with XP and not Vista, but don't use it at the moment anymore.
Here is a list of Supported Macs for 64-bit windows: http://support.apple.com/kb/HT1846
As per your trackpad problems after the drives have been installed I would try to install the update again: http://support.apple.com/kb/HT3336
Here are the boot camp updates and also may help with errors:
64 bit: http://support.apple.com/downloads/BootCamp_Update_2_1_for_Windows_Vista64
32 bit: http://support.apple.com/downloads/BootCamp_Update_2_1_for_Windows_Vista32
Also I would look in the boot camp system tray tool to see if there are settings related to your function keys.
Sorry I don't know of a function key that changes the startup volume, I only know of the select from the boot camp system tray (Windows)/Startup disk preference pane (Mac) or the hold option during startup. More on that here http://docs.info.apple.com/article.html?path=Mac/10.5/en/11892.html
A good place to find a lot of Bootcamp support would be here: http://www.apple.com/support/bootcamp/
Hope that helps,
Weston

Programmatic security using isCallerInRole(roleName) doesn't work

Hi,
I am developing an EJB application on WebAS 6.40 SP16 and try to use declarative and programmatic security combined. I have conducted the following steps to map a UME group to an j2ee ejb role:
- Mapped a new Security Role (SR_ProductAdmin) to the UME Administrators group using the Visual Administrator(Services/Security Provider/Security Roles).
- Mapped the Security Role to an EJB Application Security Role in ejb-j2ee-engine.xml
<ejb-j2ee-engine>
<security-permission>
    <security-role-map>
      <role-name>ProductAdmin</role-name>
      <server-role-name>SR_ProductAdmin</server-role-name>
    </security-role-map>
</security-permission>
</ejb-j2ee-engine>
- Added the role in ejb-jar.xml/Assembly/security-role
- Enforced descriptive security in ejb-jar.xml/Assembly/method-permission on my EJB. This works as expected, only members of the administrators group can access the EJB.
- Added another role mapped to the J2EE Security Role "all" and added it to ejb-jar.xml/Assembly/method-permission to allow some methods of the EJB to be invoked by everyone, security checking is based on parameters and done programmatically at runtime.
- I have mapped the ProductAdmin in ejb-jar.xml/Enterprise Beans/session beans/security-role-ref as described in the Developer Studio manual.
<security-role-ref>
<role-name>ProductAdminInternal</role-name>
<role-link>ProductAdmin</role-link>
</security-role-ref>
- I should be able to check the role of the caller using the Context.isCallerInRole(String roleName) but it always returns false for roleName="ProductAdminInternal". In the same context I can invoke Context.getCallerPrincipal().getName() and get (correctly) the user name "Administrator".
Thanks in advance,
Stefan

Hi Frank,
When using the Must value authentication worked but when using the Auth value it didn't.
Now I've found what the problem was.
I had to define the users and role in %JDEV_HOME%\j2ee\home\config\system-jazn-data.xml. I had setup my users in several jazn files but this one. It's pretty hard to find in which xml file you have to define users and roles. I don't understand either why switching from Must to Auth makes the authentication using different jazn files...
Now I have to test in an OC4J standalone instance.
Thanks,
Seb.

Help. iPhone 5, calendar sync issues using Outlook. Doesn't work. Does any kind soul have a solution

At my wits end. iPhone 5, OS 7.1.1, using Outlook as mail, contacts and calendar but unable to find a solution to sync everything. I have my own domain and use a small ISP. It's not an Exchange server account. I've trawled countless forums but to no avail. Can anyone help? Steve.

Mavericks doesn't sync contacts or calendar via iTunes anymore. Apple removed 'sync services' so Outlook doesn't have the sync engine to move data between iOS & the Mac. It will still work on iTunes 11 on earlier OS X's.
On 10.9 you can either use iCloud, setup your own contacts & calendar server (OS X server, Biakal, Owncloud & many others) or you can find another online service to use to sync data, like Google apps.
There is a 200 page thread on the issue…
https://discussions.apple.com/thread/5460803?start=0&tstart=0
There is also a user tip on how to setup Baikal…
Hosting your own CalDAV and CardDAV server using Baïkal Server
You should also look for apps that may help like SyncMate http://www.eltima.com or maybe missing sync? http://www.markspace.com/
<Edited by Host>

Audio capture (recording) from sound card doesn't work

I have a Asus Xonar DS sound card that uses CMI8788 chip, AV200 kernel driver and snd-virtuoso kernel module. The card is recognised on installation (i686) and there are no issues with the sound output.
This is a new installation to try to fix the (lack of) recording problem. I know the card can be used to capture sound being played from a web browser, Youtube and internet radio, as I previously had it working with audacity, gnome-recorder and mhwaveedit, but some months ago, after an upgrade it stopped working.
Alsamixer shows the card as AV200 and I have toggled all the capture options and raised levels to no avail.
The card is not broken as the capture works fine on Kubuntu and even Win7. I have tried pasting asound.state from Kubuntu but there was no diference.
Does anybody know a good troubleshooting guide that deals with the capture side, not output.

"volume: can't open /dev/mixer " is for the users who use OSS so there; you should find out what uses OSS and change it if it is possible and not solely on oss.
and the error I am having is because I defined the specific software to hwd:0,0. so what i should do is to check my softwares and set the audio output to "default"
So in another word use you sound card and in output option of your sound card choose "default over hwd:0,0"

IPad to tv using av cable doesn't work since update

II've used a av cable to connect iPad to tv via hdmi to watch you tube etc but since os update it says not compatible when I plug into the iPad and doesn't work

You need to get a new cable. Suggest you try out the cable in the store before buying. Do not know if any third party cables work. Goto apple store and buy new cable. Try in store. Older apple cables do not work either.
This problems has come up with 8.x.
Robert

What component Should I use?, Jpanel doesn't work

Hi
I need a program that has a window that can go fullscreen and windowed (I did that with a Jframe in fullscreen mode with a jpnale and a 800x600 Jpanel and destroying them with an object that maneges them), I did it with a jframe that contained a Jpanel, I used a Jpanel to avoid the flickering on the screen but I also need to change the font type and the font size, but the setFont on the Jpanel doesn't change the font (as I have realized and also read here [http://forum.java.sun.com/thread.jspa?forumID=257&threadID=150588] ), so I'm lost, I might have to redo the whole thing, but I just wanted to know what component should I use for a window that is going to have custom graphics and need diffrent fonts and diffrent font sizes and work in fullscreen without flickering
Thank you for your attention, I would aprecciate any help given

for example:
import java.awt.BorderLayout;
import java.awt.Dimension;
import java.awt.Font;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.RenderingHints;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JSlider;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ChangeListener;
public class JPanelFont extends JPanel
private Font font = getFont();
private String myString = "Fubars Rule";
private int fontSize = font.getSize();
private JSlider slider = new JSlider(0, 100, fontSize);
public JPanelFont()
    setPreferredSize(new Dimension(620, 250));
    setLayout(new BorderLayout());
    JPanel inputPanel = createInputPanel();
    add(inputPanel, BorderLayout.SOUTH);
private JPanel createInputPanel()
    JPanel ip = new JPanel();
    slider.setMajorTickSpacing(20);
    slider.setMinorTickSpacing(5);
    slider.setPaintTicks(true);
    slider.setPaintLabels(true);
    ip.add(slider);
    slider.addChangeListener(new ChangeListener()
      public void stateChanged(ChangeEvent evt)
        fontSize = (Integer)slider.getValue();
        repaint();
    return ip;
@Override
protected void paintComponent(Graphics g)
    Graphics2D g2 = (Graphics2D)g;
    Object originalHint = g2.getRenderingHint(RenderingHints.KEY_TEXT_ANTIALIASING);
    g2.setRenderingHint(RenderingHints.KEY_TEXT_ANTIALIASING, RenderingHints.VALUE_TEXT_ANTIALIAS_ON);
    super.paintComponent(g2);
    myPaint(g2);
    g2.setRenderingHint(RenderingHints.KEY_TEXT_ANTIALIASING, originalHint);
private void myPaint(Graphics2D g2)
    font = font.deriveFont(Font.BOLD, fontSize);
    g2.setFont(font);
    g2.drawString(myString, 20, 100);
private static void createAndShowUI()
    JFrame frame = new JFrame("Dynamic JPanel Font");
    frame.getContentPane().add(new JPanelFont());
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    frame.pack();
    frame.setLocationRelativeTo(null);
    frame.setVisible(true);
public static void main(String[] args)
    java.awt.EventQueue.invokeLater(new Runnable()
      public void run()
        createAndShowUI();
}Edited by: Encephalopathic on May 21, 2008 9:18 PM

Auto Query in Master Detail Form using dynamic page doesn't work

I created a Master-Detail form, and implement AutoQuery using a dynamic page
with the following code :
<HTML>
<BODY>
<ORACLE>DECLARE
nre_ VARCHAR2(100);
BEGIN
nre_ := emp_nre;
if nre_ is not null then
net_portal.Popula_Agregados(nre_);
net_portal.Popula_Docs_Agregados (nre_);
htp.p('<iframe id=myFrame name="myFrame" frameborder=0 width="250%"
height="300"
src="/pls/portal/PORTAL.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=
3
388118140&p_arg_names=_show_header&p_arg_values=NO&p_arg_names=_cad_nre_cond&p_a
rg_values=%3D&p_arg_names=cad_nre&p_arg_values='||nre_||'">
</iframe>');
end if;
EXCEPTION
WHEN OTHERS THEN
htp.p(SQLERRM);
END;
</ORACLE>
</BODY>
</HTML>
It works fine when we access the first time to the page, but if i press the
save button after inserting or updating a detail record, the header record is
lost. How can i avoid this situation ?

I changed query:
select
Replace(
'<img src="#IMAGE_PREFIX#ed-item.gif" border="0" alt="EditMap" usemap="#editmap***id***"></img>
<map name="editmap***id***">
<area shape="rect" coords="0,0,16,16" href="http://apex.oracle.com/pls/otn/f?p=&APP_ID.:'
|| decode ( type, 'FOLDER', '33', '22' )
|| ':&APP_SESSION.::&DEBUG.::P'
|| decode ( type, 'FOLDER', '33', '22' )
|| '_ID,P'
|| decode ( type, 'FOLDER', '33', '22' )
|| '_CALLING_PAGE:' || id || ',&APP_PAGE_ID." ></area></map>' ,
'***id***', id
) Edit,
id,
type,
name,
decode ( type, 'FOLDER', 33, 22 ) target
from tThe idea is - each img uses its own map.
It works now.
Check:
http://apex.oracle.com/pls/otn/f?p=20980:13
Lev
Edited by: le on Nov 3, 2010 11:11 AM

CUSTOM ROW FETCH USING PLSQL BLOCK DOESN'T WORK

Hello,
I'm using Apex 3.0, and I'm trying to use a anonymous block to populate page items instead of automatic row fetch. Apparently the block works fine but the page doesn't display the items with the values that I fetched.
I'm using something like:
Declare
v_test varchar2(10);
begin
select name into v_test from emp where emp_no=:p10_id;
:p10_name:=v_test;
end;
Does anyone have a clue ? The process is defined to run on "OnLoad - After header", but I've tried other options, but the results are the same: P10_name appears blank.
thank you for your help
JAV

But there is a catch.....on the item definition, the "SOURCE USED" must be set to "Only when current value in session is null", otherwise, it doesn't show what you want.
Cheers
JAV

Exporting MJPEG from FCP using aurora igniter

Hi,
I'm using final cut pro 4.5 HD with an DVC PRO source file captured via firewire, and a watermark element on another video track. I'm trying to export the file as a quicktime movie using current settings, but I'm getting interlacing or field order problems on the exported video.
My settings are as follows:
Sequence Settings
frame size 720x480 NTSC DV 3:2
pixel aspect ratio NTSC/CCIR 601 DV
Field DOminace: Upper Odd
COmpressor: Aurora Mjpeg A
Aurora Advanced preferences: field order also set to upper
Any idea on why this happens? I've tried some other codecs in the compressor tab of the sequence settings (such as DVC Pro) and they export without any interlacing issues, but the quality is not as good.
Brian
Mac OS X (10.4.6)

Thanks James- simple enough and it worked.
A bit of a mystery why even the pro version of QT Player wouldn't just automatically pick up the anamorphic flag, as it does when you give it a file created using QT conversion from FCP?
Little things like this cause headaches. I find the documentation on this basic area of aspect ratio, that everyone has to deal with all the time, to be quite evasive or unclear on the whole and the terminology bizarre.
I assume once saved once with 'conform aperture' set to 'clean' it will always play in 16:9 on any QT player? The client won't have the Pro version of QT- that's for sure.
Thanks again very much for your quick help,
Andrew

Voice recording on the ios7 doesn't work as well as previous version

in the previous version whatever recording was made was kept even if the battery ran out, in the new version whatever has been recording doesn't get stored if your battery runs out before the end of the recording. Very disappointing

By "google voice search" do you mean that you are using the Google Search app and are unable to tap on the little microphone and search by speaking? If so, go to Settings>Privacy>Microphone and make sure that Google Search has permission to do use the microphone.

Viewing a report from BW SAP GUI using report_view.aspx doesn't work

Hello,
when viewing reports in SAP GUI from our BW system no report as an output is showed. I can only see Infoview page and it doesn't matter whether I insert whole URL with report ID, client etc. or only report basic page.
http://<server_name>:8080/businessobjects/enterprise115/sap/infoview/report/report_view.aspx?bw_id=<report_id>&sap_sysid=<SID>&sap_client=<client>&language=EN&cmsname=<crystal_server_name>
http://<server_name>:8080/businessobjects/enterprise115/sap/infoview/report/report_view.aspx
This URL will prompt for password and then redirect me to Infoview .NET page only without report output. When I click on the report from InfoView everything is working well I can see the report output. Only from SAP GUI the URL link is not working. I configured /crystal/rptadmin details as per SDN Ingo's blog. I also configured SAP roles for folders in InfoView under path /SAP/2.0/. And all other post steps from Installation guide.
One OSS note 1219551 which refers to this problem doesn't help me either, altough I patched BOE XI R2 with latest SP6.
Version of Crystal report is BOE XI R2 with SP6. SAP system is NW 04 with BW component.
Does anyone have the same problem ?
Thanks.

Problem solved.

Email with attachments QPAC: setting "From" using process data doesn't work

Hi,
I trying to set the "From" in the Email with attachments QPAC from a process variable, let's call it "mailagent", which is of type xs:string.
So I use a set value QPAC, which sets the "mailagent" variable to "[email protected]". The workflow then continous with the Email QPAC.
Which stalls and throws the following exception:
javax.mail.MessagingException: 501 Syntax error, parameters in command "MAIL FROM:<{$/process_data/@mailagent$}>" unrecognized or missing
Hrm. I thought, I had already used the Email QPAC this way.
Is there some kind of magic to apply to the Email with attachments QPAC in order for it to accept process data in the "From"?
Steve

Yes, I'm sure, it worked for us to. But it obviously no longer does.
Yes, "mailagent" definitely is a variable of type string, though it's of type
xs:string. I'm no longer able to create variables, which don't feature the
xs namespace. Which is quite confusing as I've got absolutely no idea, what the
xs is used for.
We are using LiveCycle Workflow 7.2.1, the Email QPAC is 7.0.2. Is this the latest version?
Steve

Recording using Aurora Igniter ... doesn't work

Similar Messages

Maybe you are looking for