Recording using Delay Designer

I am new to logic, so please forgive me if this is obvious. I am using Delay Designer to play with tape looping, using one if the simple infinite repeat presets. When I record i only get the exact notes that I am playing, not the delay sounds. I tried bouncing the track to audio but that didn't help, the same exact notes were recorded. On the same track i am using Space Designer and all of that information seems to be captured in the recording. Is there any way to do what I am trying to do? Or is Delay Deisgner only provided for performance in MainStage?

Sorry it has taken me so long to get back to this. You English is not at all the problem! I finally was able to make this work. It took me quite a while to realize that the volume knob next to the bus had to be up to get the aux track effects. Thanks alot, this is great to know and it got me going with using a bus.
But I still have the original question. Now I have three instrument tracks and I have recorded a set of staggered bits on each one. When I hit play I hear the delay and reverb effects just like I want. What I am still not getting is how to I record what that sounds like if I let it play for a full minute? Do I have to do some kind of routing to an audio track and record that for a full minute or something? I am not seeing how to do this.

Similar Messages

Can I map a drum pad to Tap Pad in Delay Designer?

Hello Everyone,
I am trying to map a drum pad (M-Audio Trigger Finger) to the Tap Pad in Delay Designer using MainStage. For some reason MainStage will not let me map a Drum Pad screen control to the Tap Pad on the plugin. The screen control inspector won't show the Map Parameter button when a drum pad is selected but it will if a button is selected. The Trigger Finger is set up to send a note when the pad is hit. I would like to be able to tap out a rhythm on the drum pad and have that rhythm be recorded by Delay Designer - like what happens when you click out a rhythm on the tap pad with a mouse. It seems like this should work but I must be missing something. Can anyone help me out with this? Many Thanks in advance.

Hi Koan22,
In my experience, Drum Pad objects can only be mapped to either MIDI notes, or items in the action menu (located in the parameter mapping browser). This looks as if you would not be able to map a Drum Pad object to this parameter in Delay Designer.
However, I believe I may have found a work-around.
Simply add a button object to your layout, assign that object to the incoming trigger pad (MIDI Note Message), then map the button to the desired parameter. ( in this case Tap Record for Delay Designer).
** One more thing to note (Delay Designer specific): Don't forget to add a button for the "Last Tap" parameter to stop the tap clock.

Maximum number of records displayed on the browser using Query Designer.

When you display a query on the web using Query Designer is there a maximum limit of how many records (rows) it can display? For example, can it handle 25 million records?
Thanks.

Hi Sebastian,
I still find such a requirement weird as one cannot definitely go thru' so much of data at a time - it would thus always make sense to perhaps filter on some criteria which would make analysis & perhaps even download much faster. The limit as I understand is approx 750,000 data cells. Maybe the below link & SAP notes can help validate
Limitation in No. Of data cells displayed in BEx Analyzer
SAP Notes :-
Note 1040454 - Front-end memory requirement of the BEx Analyzer
Note 1030279 - Reports with very large result sets/BI Java
Note 1411545 - BExAnalyzer: safety belt for large resultsets
--Priya

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

Delay Designer problem issue troubleshoot ... It shouldn't be doing this.

I have about 8 delays on varying levels (decreasing on each point on the Delay Designer timeline).
When I Render to Action, there is an exact repeart/echo of what is being said, very loudly, very annoying.
When I delete Render to Action, my effect has been altered and the last point has moved levels, back up to 0 dbs when it was originally at -50.
I've deleted and altered the Effect, re-rendered, and it still does the same thing, even when I delete that point, it just changes the next one.
I'm also using Pitch Shifter II and Exciter Effects in that order before Delay Designer.
On Delay Designer, I have changed the Pan, Trans (pitch), and the rest of the mods on all points.
Any thoughts?
I have yet to find an answer for this.
10 points to the house for whichever guru finds an answer! Woot!
(My guess, the problem is Snow Leopard.)

this really deserves a response

Design Time Connection of SAP Server failure using TIBCO Designer

Hi All,
While Connection to SAP Server using TIBCO Designer using Design Connection Configuration followed error we are facing.
Connection Error. Unable to Create a Connection with the target application bdhn4973.na.pg.com using connection parameters
programID=BWAH-IFS-L6A430 gatewayService=sapgw00 and the target application error is 102RFC_ERROR_COMMUNICATIONConnect to SAP gateway failedConnect_PM TPNAME=BWAH-IFS-L6A430, GWHOST=bhdn4973.na.pg.com, GWSERV=3300LOCATION CPIC (TCP/IP) on local ost with Unicode ERROR partner 'bdhn4973.na.pg.com:3300' not reached TIME Mon Jul 18 03:28:21 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40RC - 10 MODULE nixxi.cppLINE 3284DETAIL NiPConnect2: 155.125.167.58:3300SYSTEM CALL connectERRNO 239 ERRNO TEXT Connection refusedCOUNTER 6
Note: SAP Server is running but still we are not able to connect from TIBCO Designer. Few times it's able to connect and few time it will throw an error while connecting to SAP Server.
Can you please help me if any one you have any idea regarding this.
Regards,
Vijaya

Hi,
Since you are able to connect, seems the issue with network instability.
1) Create an RFC connection and perform the connection test. Note down the time taken (milli seconds), a notable delay also can be the cause of the issue.
2) Do the ping from Tibco system to SAP and note down the time taken
3)Also check the firewalls in between the two systems and check the valid access
You may need Nework admin teams help to cross check these.
Regards,
Syed

Delay Designer manual?

I can't seem to find any information for using the new Delay Designer under Apple Help (Soundtrack Pro 2).
Does anyone know if I'm missing something?
Thanks
2GHz dual G5 (rev2) Mac OS X (10.4.10)

Thanks for the info link Chris.
However, I'm still in search of a real manual from Apple so I can learn how to use it instead of playing and stumbling around with the interface.
Not sure why Apple hasn't posted an updated STP user manual yet...maybe when they're done with all this iPhone junk they can get back to work.
2GHz dual G5 (rev2)

Help w/STP Delay Designer..... NLEdit are you gone?

So I am trying to acheive a loudspeaker sounding voice
(like when were in elementary and the principal would talk over the loudspeaker)...
I used the high pass and gain filter.... For a bit of echo, I added the Delay Designer...
But I guess it vibrates or resonates too much? (Not sure if that is the correct description)...
I've tweaked it, but there are so many options, not sure how to get rid of....
Thanks

Are you getting too many reflections? Check to see if you have Feedback turned on (will have a red line on the button), just to the right of the window. If so, try turning it off or turn down the level knob right below the button to see if that helps.
If it's not feedback, how many taps do you have going (in the Level tab window, they will be lettered A through whatever number)? you can select one or several taps at a time, right-click and select delete tap(s).
If you're not talking about echoes or reflections, is some particular frequency resonating? Click the Reso tab to see the resonance of your taps, which will add a resonance to the cutoff frequency of a filter, if you're using one on any/all of the taps.
I'm guessing it's one of the first two.
Hope that helps!
Matt
PS - I just played around with delay a little, and I got a pretty good result using the built-in MacOS Delay, which has pretty simple controls. I used a delay time of 0.25 sec, feedback of 7.5%, and wet/dry mix of 19.6%. This is of course on my voice, with no context. But food for thought!

Using Delayed Locking Mode along with Serializable Isolation Mode - problem

hi all,
I have a form that includes 2 blocks (master-detail) and I've set locking mode to delayed cause I don't want records to be locked while user is changing them but only when a COMMIT is issued.. Along with that I set Isolation Mode to Serializable as online help dictates.
Problem is that since I've done this, record seems to be saved correctly but it actually does not when i issue a COMMIT (tried it with commit_form and do_key('commit_form') and with post and then commit). I get no error message and transaction seems to be completed but nothing happens on the db.
What I've noticed is that when I issue a COMMIT with delayed locking mode on, the ON-LOCK trigger does not fire at all while it should (cause that's what delayed locking mode is supposed to do lock the record only while commiting). Does it have anything to do with my problem?
please send any ideas you might have on this
thanks in advance,
teo

Why you use Isolation Mode = Serializable?
Forms help says:
"Use delayed locking if the form's Isolation Mode property has the value Serializable."
not
"Set Isolation Mode to Serializable if Locking Mode property has the value Delayed".
Regards,
Zlatko Sirotic

How do I select more records using data blocks, set_block_property

Hi, I am new in oracle forms builder. I want to fetch more then one records using set_block_property and data block. please help me. How do I select more then one data? I don't have any Idea about Oracle
Please Help its urgent

What is your Forms version? Is your form in "Form" (single record) or "Tabular" (multi-record) layout? You can't use the SET_BLOCK_PROPERTY() built-in to change the number of records that are displayed - this must be done during design through the Forms Builder.
What exactly are you needing to do?
Craig...

Workflow created using sharepoint designer 2013 is not getting started and the initiator is Anonymous.

Hi All,
I have created a Site and List Workflow using SharePoint designer 2013, its a simple list workflow with one stage init on creating an item.
When i verified the status of workflow its showing as initiator = Anonymous and Internal Status - Not started. Please a screen shot below
Looking forward for your help.
Thanks in Advance.
Sunitha

Below is the solution.
Solution:.
check
list in workflow manager server :
1. Check https://[wfms]:12290 or http://[wfms]:12291 if they are responding 2. Check
”WorkflowMgmtPool” is started 3. Following services are running
Workflow Manager Backend
Service Bus Message Broker
Service Bus Gateway
Windows Fabric Host Service (FabricHostSvc)
4. Get workflow farm information , workflow database by Start Workflow
Manager PowerShell get-WFfarm 5. Check if the Workflow Manager farm running(workflow service backend and front end should be rennin) by Start Workflow Manager
PowerShell get-WFfarmStatus
6. Check oAut in accessible by http:// [wfms]:12291/$SYSTEM/$Metadata/json/1
7. Restart the WorkflowServiceBackend service
net stop WorkflowServiceBackend
net start WorkflowServiceBackend
Reference Link
http://blogs.msdn.com/b/laleh/archive/2014/09/03/sharepoint-2013-workflow-troublehsooting.aspx
Thanks all.
Sunitha

How can I save a file using In Design 6.0 and open it in 5.5

We have Creative Suite 6.0 and 5.5. How can we read a file created using In Design 6.0 on another computer that has version 5.5?

The file needs to be saved to IDML from CS6.
Mylenium

Change Scheduling Agreement and Info Record using Bapi

Hi Experts,
Can anybody say how to change the Scheduling agreement and Info Record using Bapi.
I use BAPI_AGREEMENT_MAINTAIN to change Scheduling Agreement .
But it does not changing Scheduling lines.

Hi,
Please find the below link check the setting are correct or not
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02cb00a-bfb4-2c10-98aa-e33e7f64ba28?quicklink=index&overridelayout=true
Reagrds,
Pramod

How to get multiple records using fn-bea:execute-sql()

Hi,
I created Proxy service(ALSB3.0) to get records from DB table. I have used Xquery function(fn-bea:execute-sql()). Using simple SQL query I got single record, but my table having multiple records. Please suggest how to get multiple records using fn-bea:execute-sql() and how to assign them in ALSB variable.
Regards,
Nagaraju
Edited by: user10373980 on Sep 29, 2008 6:11 AM

Hi,
Am facing the same issue stated above that I couldnt get all the records in the table that am querying in the Proxyservice.
For example:
fn-bea:execute-sql('EsbDataSource', 'student', 'select Name from StudentList' ) is the query that am using to fetch the records from the table called StudentList which contains more than one records like
Id Name
01 XXX
02 YYY
03 ZZZ
I tried to assign the result of the above query in a variable and while trying to log the variable, I can see the below
<student>
<Name>XXX</Name>
</student>
I want to have all the records from my table in xml format but it's not coming up. I get the value only from the first row of my table.
Please suggest.
regards,
Venkat

How to create a new record using a custom method?

Hi I want to create Jdev 11 a new record using the contructor following in the footsteps of http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.4/navSetId._/vtAnchor.CACCIJAG/vtTopicFile.adfdevguide%7Cweb_adv~htm/.
My problem is the following.
Messages for this page are listed below.
Error
JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
Error
java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
Error
Object: null is not a known entity type.
Someone can help me?
Cristian.

Hello Frank, this tutorial make it and was successful but, what I am trying to do is add a new record in the table departments. The steps undertaken are suguientes
drag over page the contructor department, with a submit, this will drag on the button, the method presistencia, set binding action with "$ (bindings.Departments.result)", and when running the application gives me the error
Nov 2, 2007 10:06:22 PM oracle.adf.controller.faces.lifecycle.FacesPageLifecycle addMessage
WARNING: ADFc: JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
I need to know if what I am doing is right, because I followed the steps of the tutorials and it is not functioning the insertion of a new record.
Thank you thank you.

Recording using Delay Designer

Similar Messages

Maybe you are looking for