Recording using line 2 and line 3 xfi

i have asked the tech for help on this but didnt come up with anything,
is there a solution to this or has anyone managed it's
im trying to record from 2 devices (micraphone and
?guitar) at the same time but i would like to record these onto 2
seperate channels using eg Reason or Abelton li've,
the only way i can see doing this is if i can plug into line
and line 2 and record from both similtaniously, is it possible to
?activate line and line 2 at the same time?

I don't know X-Fi cards but supposed you need to work on Audio Creation Mode + ASIO driver mode. On your recording software, check what input ports are available, enable those ports you need (normally through <software> options audio ... ) and select each port for tracks properly.
Remember that instrument/vocal is 'normally' recorded as mono source -> you don't necessarily need more than one stereo input channel for this task (if you have pre-amp for mic/both) or one mic input + one mono channel (from stereo input).
jutapa

Similar Messages

Recording using line out j

My daughter has a Zen Nano Plus and I have tried to record direct off CD player with the line out jack (one of the reasons for buying this product). The recording worked but it is a little distorted - a kind of crackle keeps appearing over the otherwise ok sound quality at regular intervals.
Anyone any ideas why?

I don't think any N200 or Nano Plus owners in here would recommend buying one specifically for the line-in (not line-out) recording feature. It has been mentioned before that it is of poor quality.
One of the reasons is that the CD player needs to have a line-out socket - if it only has a headphone socket then you need to set the correct volume level before encoding or you get distortion (if it is too loud) or quiet music (if it is too quiet).
You'll need trial and error to get the correct level.
PB

Parse JSON records using PL/SQL and store the output in Oracle Database.

We have JSON data/record stored in a Oracle table as CLOB(database version 10g). We need to read/parse this JSON data and recognize the relevant tags and corresponding values in this JSON data and then insert these id/values into a separate Oracle staging table.
Please let me know if there is any re-usable code available for this.
We are looking for solution that does this manipulation in pl/sql. If this is not feasible, even Java code approach is fine.
Regards,
Kiranmayi.

Hello,
PL/JSON | Free software downloads at SourceForge.net
ERASME - pl/sql library for JSON
Regards
Marcus

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

How can i use PCIe 1433 and basler line camera to construct image and pocess it?

hello! every one ,I am new to machine vision.i have two problems to ask.First,how can i use line camera and 1433 to acquire 2-D image?second,if i want to pocess the 1-D signal ,how can i do it ?i expect for your answer ,thank you!

What you are trying to do is not something you can easily do in a forum, but I can give you the basics.
You have a CameraLink frame Grabber (PCIe 1433) and a LineScan Camera
The framegrabber needs to be configured to understand how to communicate with the camera. You need a file from the camera vendor. This file might already be installed. You can use MAX to check if it is, under Devices/IMAQ.
Assuming you can get to the point where you can communicate with the camera, you need to configure your acquisition.
Since the camera is a line scan camera, it captures image data one pixel ine at a time. You will need to configure the frame grabber to determine how many lines per image you want. The low limit is usually 1, and the high limit is either based on the framegrabber's internal memory, or that of the computer.
If you are using labview, you will need to open a sessing to the camera, acquire the image(s), and then close the session when you are done.
Once the image(s) are captured, you can performa analysis using the NI Vision Toolkit.
Sorry, but there is no way to condense years into one post.
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions

CLOSING A PATH MADE UP OF CURVES USING PEN TOOL AND STRAIGHT LINES USING LINE TOOL

Hi,
I have just started using Fireworks and am unable to close a
figure made up of curves using pen tool and line segments using pen
/ line tools. How do I plot points on any given shape and close it
so that i can colour the shape . Right now I am not able to give
colour to the shapes I have created.
Please help
Regards
Sanjish

SANJISH wrote:
> Hi,
> I have just started using Fireworks and am unable to
close a figure
> made up of curves using pen tool and line segments using
pen / line tools. How
> do I plot points on any given shape and close it so that
i can colour the shape
> . Right now I am not able to give colour to the shapes I
have created.
>
> Please help
>
> Regards
>
> Sanjish
>
A link to the file would be helpful.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
See my work on Flickr
http://www.flickr.com/photos/jim_babbage/

How to use line wrapping and line spacing in java?how to use line wrapping

how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?how to use line wrapping and line spacing in java?

Hello,
You should post your question at:
http://java.forum.sun.com
Thanks
- Rose

Satellite P300-1GN Cannot record using the line-in audio

Toshiba P300-1GN, win XP SP3, Conexant HD Audio - can not make it record from line-in input, microphone (built-in & external) works OK, but when select Line-In in Recording Control there is no signal anymore!
This is quite fresh install win XP with Toshiba latest drivers.
Any help?

In fact I have Leadtek winfast TV usb II Deluxe card and sound should work through its own USB Audio drivers in Win XP, but have no luck, so I tried to connect it with its line out -> line in (like in Win 2000)....so I will try to find solution for USB audio....
thanx

Cannot record using Audio Line In

Using my Mac Book Air, I cannot record (in Garage Band) using Line In. When I go to System Preferences, Sound, Input... LINE IN is not an option. The only input source is an internal microphone.
Does Mac Book Air have a LINE IN option? If so, how do I switch to that?

Hi,
according to the specs http://support.apple.com/kb/SP8 a MacBook Air does not have an Audio Line-In only the internal microphone.
Only chance you have is to get an USB-connected audio device like iMic from Griffin for example http://www.griffintechnology.com/products/imic
Regards
Stefan

How to use line wrapping and line spacing in java?

how to use line wrapping and line spacing in java?

Hi,
This is explained in the java Tutorial. Please see the link:
http://java.sun.com/docs/books/tutorial/i18n/text/line.html
and find some sample examples.
Hope this helps,
--Sun/DTS

HT201263 My iphone started freezing 2 days ago while taking a picture and again while using an application and then restart but the battery was never low. today it froze,restarted then showed white static looking lines and won't turn on at all. Please Hel

My iphone started freezing 2 days ago while taking a picture and again while using an application and then restart but the battery was never low. today it froze,restarted then showed white static looking lines and won't turn on at all. Please Help

I can't restart the iphone to reset or restore. I held the homebutton down and the homebutton + sleepbutton down at the same time. The apple doesn't even appear.
I've also tried connecting it to the charger. It's not charging and dosn't recongize it.
I tried connecting the phone to itunes on the computer to see if it registered and charged it but that didn't work either.

Change Scheduling Agreement and Info Record using Bapi

Hi Experts,
Can anybody say how to change the Scheduling agreement and Info Record using Bapi.
I use BAPI_AGREEMENT_MAINTAIN to change Scheduling Agreement .
But it does not changing Scheduling lines.

Hi,
Please find the below link check the setting are correct or not
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02cb00a-bfb4-2c10-98aa-e33e7f64ba28?quicklink=index&overridelayout=true
Reagrds,
Pramod

How do I record through Line in on Macbook Pro 13"?

How do I record through Line in on Macbook Pro 13"?
Do I need special software?
How to change the setup?
Shlomo

Shlomofromoh wrote:
How do I record through Line in on Macbook Pro 13"?
Let me be sure I understand what you need. You want to connect an audio device to the Audio In port of your MBP and record its output with the MBP.
If that's correct, what you need is audio editing software. You can use GarageBand, which probably came bundled with your MBP, but it's a bit heavy for that purpose alone. A better tool is the free audio editor Audacity. It's powerful and cross-platform, which means that it's a little rougher around the edges than is usually the case with Mac software, but you can't beat the price. There are others (Sound Studio, Amadeus Pro, TwistedWave, Wave Editor, and more), but you can get going with Audacity.

Can't use LINE IN audio with iSight Camera on iMovie 08

I want to record a video, using the internal iSight camera of my iMac, but I want to use the "line in" audio instead of the internal microphone of my iMac. I have tried for hours, and done the obvious things (selecting "line in" under System Preferences). I can record audio perfectly using Sound Studio or other programs, so it's not like the Mac isn't getting the audio. The problem is convincing iMovie to accept the audio of the Line In rather than the internal microphone of the iSight camera.
Thanks to all who would reply.

I've had the same problem, and it seems that this is simply not possible in iMovie... Disappointed!
Instead, having set 'line in' as input under System Preferences, fire up Quicktime Player and choose New Movie Recording under the File menu.
The movie will be recorded using system sound input, i.e. line in. It can then be opened / imported in iMovie for editing et c.
This works for me with the built in iSight on an intel Penryn Macbook Pro.
hth,
/m

Cannot record through line-in in bootcamp MBP late summer '09 model

cannot record through line-in in bootcamp MBP late summer '09 model
audio source (mp3 player) <3.5mm male input-------------3.5mm male input> line-in to macbook pro late summer 2009 model bootcamp windows xp sp2
when i select microphone in the audio panel - it works
when i select line-in and plug in the 3.5mm jack input to 3.5mm jack input to a fm radio for ex. it doesn't work
how do i make the line-in work?
i remember that when i first installed mac osx sl and windows xp bootcamp - the first couple of times around when partitioning the hd - the line-in worked a couple of times, in between times somewhere along the line i made some change to the spdif settings ?? or driver / to make the red light that comes on in the line-in jack go away - the other method was to use a toothpick to push a tiny button inside the jack, did that once -but the redlight came back again after a restart on bootcamp side.
thanks in advance,
-r

Although I don't use it, the Line-Input jack should require a signal about 40dB higher than what a microphone alone puts out. If your cable only adapts the connector and does not provide amplification, I'm not surprised you get nothing. If you are lucky, you MIGHT get a low signal by going into System Prefs/Sound/input/line-in and turning the input level slider all the way up. But the real answer to to get a mike preamp or mixer, or a mike with line-level output. Some products take a mike input and convert it to digital into the USB port.

Recording using line 2 and line 3 xfi

Similar Messages

Maybe you are looking for