Recording using the Line in on my lenovo g550

Hi Guys I have been using the microphone in on my g550 to record music and when I record it any replay it the music sounds quite poor quality. Are there any internal presets I can change to improve this?

There is no Line-in on this notebook. Only an input for the microphone. Buy an external soundcard if you want to record.

Similar Messages

Satellite P300-1GN Cannot record using the line-in audio

Toshiba P300-1GN, win XP SP3, Conexant HD Audio - can not make it record from line-in input, microphone (built-in & external) works OK, but when select Line-In in Recording Control there is no signal anymore!
This is quite fresh install win XP with Toshiba latest drivers.
Any help?

In fact I have Leadtek winfast TV usb II Deluxe card and sound should work through its own USB Audio drivers in Win XP, but have no luck, so I tried to connect it with its line out -> line in (like in Win 2000)....so I will try to find solution for USB audio....
thanx

Identifing duplicate master data records using the MDM Import Manager

hi all
I read the Topis "How to identify duplicate master data records using the MDM Import Manager</b>"
i tried to create import maps and to set rules. but when i import them it creates the new vendor records for each rule with rest of the fields blank.
when i import vendor data all the three fields i.e Match rate , match type and match group are blank.
My Question is :
I am getting vendor data from SAP R/3.
In which source (in lookup xml file or data xml file) do i have to include these above three fields and how all the rules will be reflected in repository?

Hi Sheetal
Here we go when do you Import any data (vendor master) please follow the following steps;
1. First of all apply the map to the source data
2. In the Match Record tab there are 3 possiblities
   a.[Remote Key] : Checks the current source rec with
     repository along with all the fields - This is
     default
   b.Remove [Remote key] - by double click the same; and
     choose any single fields like Vendor Number or
     name - Then the current record will be matched
     with the repository based on the field.
   c.Instead of single field you can choose combination
     also.
3. Based on the Match results, match class will be set
   automatically;
   a. None
   b. Single
   c. Multiple
4. Then Match Type
    a.Exact-All the individual value matches are Equal.
    b.Partial-At least one value match is Equal and at least one Undefined; no value matches are Not Equal.
    c.Conflict-At least one value match is Equal and at least one value match is Not Equal.
5. then chek the Import status and Execute the import.
Hope this helps you.
cheers
Alexander
Note: Pls dont forget reward points.

How to turn off measurements when using the line tool

Hello. I'm sorry to trouble you with this small thing but its driving me nuts. I'm using a shared computer at a university and we just upgraded to CS6. When I use the line tool while making a mask a box pops up which measures the line's length and angle. I want to turn it off, and it blocks being able to see what I am trying to mask. I've tried looking this up online and in Photoshop help but I just don't know the correct terminolgy, i.e. what to call it, to find out how to turn it off. Thank you so much so much for any help!
here is a jpg screenshot: https://www.dropbox.com/s/njena5x9ppajzqq/linetool.jpg

That looks like the on-image displays that were added to photoshop cs6
You should be able to turn that off in Photoshop>Preferences>Interface>Show Transformation Values and set Never as the value.

How do I stop Photoshop CS4 from creating a new layer each time I use the line tool?

How do I stop Photoshop CS4 from creating a new layer each time I use the line tool?
Each time I use the line tool, a new layer is created. How can I stop this? No settings were changed.
Thanks in advance.

Look at the three options in the top bar.

Nasty feedback when trying to record using the internal mic

I get nasty feedback when trying to record using the internal mic on my macbook. I'm running Maverick. Why is this happening?

Note: there may be other issues involved, but without further details I can only suggest that using headphones is the best way to accurately hear what you're recording, adjust gain levels, and avoid feedback. So this should be the first thing to try as you troubleshoot.

Recording using the head phone out

I am sure this question has benn asked before but I couldn't find it on the postings. Is there any way I can record from CD/Tape player using the head phone output? There are no other sources of output. Thanks, Herb Hall

herbhall274,
I've connected the headphone jack of a small handheld cassette player to the line-in of a SoundBlaster card (using a male-male stereo cable). Turn up the CD/Tape player volume slowly until you get a good sound level in your recording software that doesn't clip. That will keep your input voltage in a range that is safe for your soundcard (~v). As long as you're talking about a standard CD/Tape unit that runs on batteries or a low voltage DC adapter, or a deck unit with a low voltage headphone jack, it should work.Message Edited by Katman on 02-29-200805:36 PM

How can I display the length of the yet unfinished line that a user is drawing in the image using the line tool of the IMAQ tool palette.

Is this really not possible using standard Labview/Vision YI`s?

Herbert,
I can't find a way to extract the information you want within the program. However, this information is displayed as part of the IMAQ tool palette while the user is drawing the line. The pallette shows the anchor point, the X and Y offsets, and the line length and angle.
Bruce
Bruce Ammons
Ammons Engineering

Create the user master records using the Enterprise Portal

Hello gurus!!
I'm configuring SRM 7.0 with EP.
I'm configuring the organizational structure, and steps guide (pdf and Solution Manager ) are:
1. Go to transaction SU01 and create an ABAP User. (SRMADMIN)
2. Assign this user the administrator role /SAPSRM/ADMINISTRATOR
3. As the administrator, creater the organizational plan
4. Create the remaining organizational unit
5. Using the Enterprise Portal application, Business Parter:Employee, create the user master records for the departmental managers.
How I must create the user in Enterprise Portal? What user I have to use to log on in the Enterprise Portal application? Has the user to be integrated in the organzational structure??
Thanks in advance!!!!
Best regards.
Maria.

Hi,
You can create users in WebDynpro application. You can also create users in USERS_GEN transaction.
Regards,
Masa

Unable to search for first record using the Preview tree

Post Author: TheBig1980s
CA Forum: General
Hello:
Users are unable to search for the first record in the Preview tab's tree. The reason for this is because the first record is within the first page header of the report. My guess is that, by design, Crystal takes the end user to whatever the first instance of the record iseven if that first record is in a page header. That's not "good". I want the user to be taken to the first record within the details of the reportnot within the page header.
I have suppressed the page header to not print on the first record by using OnFirstRecord. But, I still get the same issue where end users cannot select the first record in the tree without being taken to the page header. Very strange.
Can anybody think of any other ideas?
Thanks!
TheBig1980s

Thank you Dave Merchant and try67 for your responses. As per my previous post, I contacted the company re the catalogue and they have responded favourably. I'll include their response because it gives the reason for the search failure as document compression which you might find interesting. I'll await their new catalogue and see if they have fixed the problem.
Company response:
Thank you very much for your input. And yes, you are correct, the compression we used for the current catalogue's PDF format does strip out text included in the catalogue. We used the compression settings we did with the intention of minimising download time, however I take your point about including text for search purposes (which I also utilise when I'm scanning through PDFs).
We will actually be posting out our new catalogue next week and we'll release the new PDF version on the website at the same time. I've asked our graphic designer to ensure that the PDF we use for the new catalogue includes searchable text.

Why can't I select or update the Record using the PreparedStatement?

the DB is oracle9i,here is the test table
test
id number;
name char(10);
intro char(10);
I have insert a record in the table.
Now I will select or update the record by using the PreparedStatement here is my code:
sqlStr = "update test set intro = ? where name =?";
PreparedStatement stmt = conn.prepareStatement(sqlStr);
stmt.setString(1,"my name is irixwang");
stmt.setString(2,"irixwang");
int is = stmt.executeUpdate();
if (is >=1 )
System.out.println("ok");
It will not work ,but where I change the update condiction as followed:
sqlStr = "update test set intro = ? where id =?";
PreparedStatement stmt = conn.prepareStatement(sqlStr);
stmt.setString(1,"my name is irixwang");
stmt.setInt(2,100);
int is = stmt.executeUpdate();
It works well,why?
please help me!thk!!!!

I doubt it works "well" in either case since you are inserting a string that is longer than 10 characters into a field that only holds 10 characters. But to your question....
A char data type holds a fixed number of characters - in your case 10.
Because it holds 10 characters it will never hold 9, regardless of what you think is in the field it will always have 10 characters in it. The value you are using for query for name is 9 characters. Since 9 characters, regardless of content, will never be equal to 10 characters there is no way that it will update.
So your choice is to either use a varchar, which holds a variable number of characters, or to always use 10 characters for your query (pad it with spaces.)

Want to insert a record using the updatable view object..

Hi, i am trying to create a new record in my first page using the updatable entity..I set the form in creat mode by default so that it will show empty fields for the first time.It works but want to know the following details..
1.Want to set default values to some fields ,so how do i override the create method and where(i mean the view object or entity).
2) internally it is using update query but not insert to insert a new record.
3) if it uses insert internally, how do i manipulate the insert statement at run time.
Guys please share ur experience and knowledge with me.I am awaiting for ur help....
thanks in advance..

From my perspective, you basically have 2 issues going here, the back end (database) and the front end (web page).
To simplify your life, test your overridden methods using the built-in tester. You can use it by right-clicking on your application module and selecting test. You can insert/update/delete rows in any updateable view object you have available in your data model. The only down-side is that you can't step through your code (so far as I've been able to determine, anyway).
As for the web side, there's a commit action in the data control palette. You can drop that onto a page as a button. There's also some tricks you can play so it saves and commits on the same button click, but I don't recall how specifically you do that. I know I've found it searching in here though.

Read infotype records using the classes

Hi All,
In my system i can see many classes with cl_hrpa*
Here i want to read a infotype record using these classes. I want finally the data in PA0008 or a record in P0008 format.
i tried using the various classes like
cl_hrpa_masterdata_factory
if_hrpa_infty_bl
hrpad_infty_container_tab
I tried using the sevaral calsses passing one class type to other. finally i get is the class cl_hrpa_infotype_0008_in.
can any one suggest how i should be reading the data for any infotype.
Pls do not suggest the function module HR_READ_INFOTYPE. I want to use these classes to read the data.
Pls suggest
Regards,
Umesh Chaudhari.

Hi,
Did you get any replies to this or have you found an answer on your own?
Regards,
LC

HCM Process and Forms - Create and End record using the same form scenario

Hi All,
I have the following requirement while using HCM Processes and Forms: Using one form/scenario I need to both create a record or be able to end a record for infotype 841. When looking at the back-end service SAP_PA I have operations Create, Change, Change without delimiting and Delete. My requirement would be to do both a create and a delete I guess, but these two can't be selected at the same time while configuring the form scenario.
I was thinking about doing somethign with the startdate and enddate instead of using the effective date. But I have no clue how to do that.
How would this be possible?
Thanks,
J

You are correct in assuming that you cannot have a create and delete on the same infotype. The config will not allow it. Instead, configure the create and then do the delete via a call to you own method in the workflow or via the advanced generic service
Cheers
Ian

Video recording using the built in iSight camera on a MacBook Pro

Hello,
Where do I find directions to record video using the built in iSight camera on a MacBook Pro?
Thank you,
Deb

Hi macosxlover,
Those are the instructions.
Open iMovie
Move the slider to the camera (use it as a drop down if more than one cam is available)
Press the record button to add the video feed as a clip.
Edit as required.
12:00 AM Monday; June 12, 2006

Recording using the Line in on my lenovo g550

Similar Messages

Maybe you are looking for