Recording video issue

Anyone else having issue with recording a video.Just tested out after update and it seems like the audio keeps playing but the image stops.Any help or solution would be appreciated.

Wildman wrote:
No issues here, have you tried to clear data from camera app at Settings / Apps / All Tab / Camera / Clear Data..  Also clearing the Media Storage also under same directory...

Similar Messages

  • My ipod is only a month old, i am having trouble with recording video and  volume issues when i oovoo, i can not hear or be heard

    Please help! my ipod touch 4g is less than a month old...when i first got it i was able to record video ...in addition i could oovoo but now there is no volume coming or going when i try to oovoo. i can not get screen to open either to record video...what to do?

    If the camera shutter is stuck shut, try restoring the iPod to factory defaults/new iPod.  If that does not work you have to get the iPod replced by Apple under yur warranty.  this is a know problem.  See this ongoing discussion:
    Camera shutter issue: Apple Support Communities

  • Video issues in mac os 10.6.4 and windows 7 64x

    To start with, my computer is the late 2008 model Imac, has 3g of memory, and wasn't experiencing any video problems until earlier this month. I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
    I'm thinking, Ok, perhaps this is a bad install of windows, since it happened in a windows program (everquest 2, an online game), and rebooted into Mac. Almost immediately, I saw video problems (snow, pixels, lines, distortion)on the mac side, which had occurred with the windows side.
    My husband is angry, I'm angry, so I decide that I'm going to trash everything and start off completely fresh. I intended to reinstall mac 10.6.4 after erasing everything, so I removed the windows partition, and attempted to reinstall snow leapard, without using the original leapard disc that came with the system. I didn't realize until too late that I had forgotten to erase the original os, but I figured I'd see if there were any problems and go from there. I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side. I was able to fully update the mac side before attempting any installation of the windows os.
    I started having video problems really quickly in the windows side after the full installation and update, but the system disabled the initial nvidia drivers and went to plug and play drivers. The only thing that displayed any further problems was the ISight camera, but that was to be expected without the apple updates.
    I did read the bootcamp manual afterwards, and saw that my IMac, being an earlier version, might not properly install bootcamp drivers for windows 7 64x, although we had successfully located and manually installed the drivers earlier when first installing windows 7 64x. Keep in mind, I'd had the os installed for several months without any video problems, and in fact, it worked like a dream in both os after the computer had a previous repair of the hard drive, sound card, and logic board.
    Anyway, to continue, after the video symptoms occurred on windows, I switched back over to mac to look for and install a video firmware download that I had located through these same forums. I had to change os because it was a dmg, so I did so. Now, I still had the snow leapard install disc in the computer, so that's the first thing I saw on the screen when booting into mac. I immediately started also seeing the pixels and some distortion, but it stopped briefly. I tried bringing up Firefox to get to the download, but the computer froze (showed the little round ball)and wouldn't respond further. I tried several reboots, and could usually at least get into snow leapard, but the computer froze each time.
    Finally, after several attempts, the computer won't boot into either os, and won't go into the install disc either. I'm completely at a loss, because I'm told this IS NOT a hardware issue, and the problem was resolved with simply resetting everything. The problem was NOT resolved with that reset, because I'm able to reproduce this issue consistently with multiple reboots, and have even recorded it with a camera I have. I'm at my wit's end, because I'm on a fixed income, and this costs me time and money I just don't have. It's caused me to get behind on one of my bills, because I have to have a computer, and further repairs, while covered under warranty, are going to cost me further money to get to and from the service center. Not to mention the fact that it's going to take another month for me to wait for my money to become available so that I can pay for the ride back and forth for the repair.
    Anyone, anyone at all, have any suggestions that may help? I have access to another computer, and can try using that computer to help me boot the other computer up, if I know how. Please, this is so frustrating to me, so I'm hoping someone can suggest something that may help.
    I know I mentioned in the post what type of video issues I'm experiencing, but I figured I'd reiterate to make it easy. The computer will display a distorted image on bootup, like a pixelated off-center image. You know, kinda like 2 punch cards held up to each other, with the same holes, but off center. You also get snow, when able to boot up, with the screen sometimes showing half the screen, flickering. Like the screen is broken, but it's not even scratched. And it's not all the time either, if it was, I would think maybe an internal screen was broken or cracked (I've worked tech support for devices with internal screens, so I understand you can have a perfectly good outer screen, but a cracked inner screen). Right now, on bootup, I get that punch card effect, then the screen goes blank. I should mention that sometimes the system will show that, but then boot into windows with no immediate distortion, but will show distortion in the mac side if I'm able to boot into snow leapard. Hope this information helps someone give me an answer that helps.

    To start with, my computer is the late 2008 model Imac, has 3g of memory …
    I'm assuming you mean the Early 2008 iMac since there is no "late 2008" one. AFAIK, it came with 2 GB of RAM standard & the common BTO option would have been 4 GB, so can we assume that you have installed an aftermarket memory module to get to 3 GB?
    I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
    What repair and setup? Is this something you did after getting the iMac back from service? If so, what exactly did you do?
    I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side.
    Do you mean the Windows drivers or something else? Did you follow the Bootcamp install procedure exactly when reinstalling Windows or not?
    I switched back over to mac to look for and install a video firmware download that I had located through these same forums.
    What video firmware download do you mean? AKAIK, there are none for early 2008 iMacs.
    No offense intended, but it is hard to understand exactly what you have done because while you mention much, you don't say a lot about the specifics for a lot of that. In general, it is best to concentrate on those things & keep the commentary to a minimum.

  • Video Issues in Adobe Presenter 9

    Video issues - I have inserted a 3 minute video in a Presenter 9  file and it plays fine when previewing but only 6 seconds when published. Plays 6 seconds and then buffers.  I have tried inserting  different formats and still get the same results.  Anyone else have this issue or ideas on how to resolve?

    Hi there,
    I got a solution from the Adobe Captivate technical team.
    As an attempt to resolve your issue
    Uncheck the option “Accelerate 3D graphics” under VM Settings by going to VM >> Settings >> Display>> 3D graphics
    Once done please try capturing and hopefully this must resolve your issue
    I did this and it worked, yeah. However, it is still incredibly frustrating using VMWare, when I am recording using Presenter it keeps freezing and I have to shut the entire system down. Guess I'll try the Partition!!!
    Thanks again

  • Just Static Instead of Audio When Recording Videos

    Just updated to 4.1 and no dice. Whenever I record videos it does not record audio as well, just static. When I first had the phone it worked fine. I've read other forum posts about it and not found anything useful to attempt. Fairly annoyed that I spend $200 and have to put up with crap like this. I'm taking it to an Apple repair place today to see what they can tell me. Hopefully it won't be that, "It just works," because quite apparently it does not.

    I use a PC for syncing, not sure what you mean by create a new user. I took it to the local Apple Authorized Dealer/Repair place yesterday (the nearest Apple store to me is in Orlando, about an hour's drive) and they informed me that I would most likely have to A: Send it back, B: Take it back to Apple and get a new phone.
    I'm fairly certain it is a software issue though, just from my experience in audio technology. The more I listen to it, the more I realize it's actually hiss and not static. Something like you'd get if your preamp was turned way down on a mic, but your main's were at 100%. You get all that low-end hiss and crap that's normal covered up by the audio, and the audio itself is very faint. It seems like it also might have something to do with the bluetooth setup too.
    I'm still fairly surprised that this issue is not being addressed by Apple directly. With as many PR disasters as they've had with this phone you'd think they would try and head something like this off at the pass. Oh well...

  • Photo Booth has stopped recording Videos all of a sudden??

    Hi all,
    on my iMac only 6 months old, all of a sudden after working fine Photo Booth today has decided to stop recording videos.
    The app launches, green light comes on and the picture/video shows, i press record and it counts down but the counter doesnt move although the picture is still there.
    Press stop and it loads a black screen and plonks it in the library thing at the bottom of the picture..  Very odd.
    I have trashed the Preferences and this does nothing,
    Have deleted the other videos so its not a space issue?
    Wondering if anyone else has the same thing???
    Any help greatly accepted,,
    Many thanks

    Does anyone know where you can get a version of Photobooth? I didnt have any disks of the OSX lion that shipped with my iMac?

  • No sound when recording videos iphone4

    Hello,
    When i record videos with my Iphone 4 there is no sound when i read them and, when i try to use the speaker during calls my correspondants don't hear me.
    Any clue about this ?
    Thanks

    Hello Kboum,
    It sounds like the microphone on your phone is not functioning correctly in either the Camera app or the Phone app. I recommend the troubleshooting for it in the article named:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Make sure nothing is plugged in to the jack connector.
    Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
    Make sure none of the microphones is obstructed by dirt or debris.
    Turn the iPhone off and then on.
    Make sure that the latest version of iOS is installed.
    If necessary, find general iPhone hardware troubleshooting suggestions.
    For further assistance, contact Apple Support.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Useless microphone while recording videos.-.

    My iPhones microphone is not working when I play the recorded videos from my device all I hear is loud cracking sounds and faint voices, while doing Skype and regular cellular calls and voice memos it works absolutely normal but when it comes to recording videos it becomes useless.

    Hi Dcypha13,
    Thanks for visiting Apple Support Communities.
    If one of the microphones on your iPhone is not working, I recommend these troubleshooting steps:
    Make sure nothing is plugged in to the jack connector.
    Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
    Make sure none of the microphones is obstructed by dirt or debris.
    Turn the iPhone off and then on.
    Make sure that the latest version of iOS is installed.
    If necessary, find general iPhone hardware troubleshooting suggestions.
    For further assistance, contact Apple Support.
    You can find these steps and more information here:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Best,
    Jeremy

  • No sound when recording videos with iphone 4s - ios7

    Since I have downloaded ios7 to my iphone 4s I am no longer getting any sounds when recording videos. When looking back at past videos I have recorded, they still have sound in the playback. I have tried resetting my phone and reseting it to factory settings. Any recommendations?

    Hey Bryan3939!
    If I'm reading this correctly, it sounds like you might be experiencing an issue with your microphone recording during videos. I have an article for you that can help you troubleshoot this issue:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • No sound while recording videos

    Side note: I am not familiar with Windows 7 or 8. I am a novice with Windows programs, but I am pretty handy at locating the necessary information and programs needed to complete Tier 1 troubleshooting. Forgive me if I have used the incorrect verbiage.
    I have a HP Charcoal Gray 15.6" 2000-bf69WM notebook that is running Windows 8, AMD E-300 EPU HD Graphics 1.30 GHz, 4.00 usable gigs, 64 -bit and I cannot get the pre-installed camera application to record sound. The notebook is running the original software loaded by HP with the exception of MS Word.  I am able to successfully record HD videos minus the audio/sound. I have checked the drivers, device manager, hardware settings, ensured that the default IDT Hi-def audio (speakers and headphones) are set to default under the playback tab (only other option available is communications headphones). The device manager does not indicate that any issues with any component.
    Under the recording tab there are external mic (not selected), internal mic (selected as default) and stereo mx (indicates it is set to ready). All the test ran produce ample sound under the sound tab and the recording tab. I have since completed a few sound/audio checks and I have noticed an annoying new development. Each key stroke and movement on and within inches of the notebook emits a shallow echo. I realize that the outer edge of the monitor is a speaker and as I run my hand over and around the outer edge of the notebook, I can hear the muffled sounds you would hear if you ran your hand over a microphone. The only way to get this to stop is to mute the volume completely.
    Side note, when I access the pre-installed Cyber Link YouCam, I am able to record videos and playback the clips which include the sound. Should this issue be isolated to the pre-installed camera program, how would I go about uninstalling/removing that and reinstalling it?
    I would truly welcome any assistance with this concern. Should more details be required with regards to my system, I am obliged to provide them.
    Thank you.

    FOLLOW MY STEP ONCE HOPE THAT WILL HELP YOU,IF YOU ARE USING WINDOWS 8
    Control Panel\All Control Panel Items\Troubleshooting\Hardware and Sound
    THEIR YOU CAN SEE RECORDING AUDIO   CLICK ON THAT AND FOLLOW THE STEPS
    BEST OF LUCK
    MAKE SURE THAT YOUR SYSTEM IS CONNECTED TO INTERNET AND WINDOWS UPDATION IS TURNED ON
    <<<------DONT 4GET TO CLICK ON THE KUDO STAR ON THE RYT SIDE TO SAY THANKS IF I HELPED YOU .
    I AM NOT AN HP EMPLOYE ,SO  YOUR RESPONDS GIVE ME INSPIRATION TO CONTINUE IN THE FORM.......

  • No sound when recording videos

    Hi,
    I m facing problem with my lumia 820, it's not recording sound with videos. When video is played, it gives buzzing sound. Its similar for any App which uses MIC for sound recording....
    Any help.

    Hi, TejinderPS. Did something happen to your Lumia 820 before this audio issue came up? Do you also experience the same thing during calls? Are you being heard by the person you're speaking with?
    If your phone has a body cover that might block the microphone, try removing it and see if the you'll be able to record videos with clear audio quality. You can also try rebooting your phone by simultaneously pressing and holding the volume down and power keys until it vibrates and restarts. 
    Let us know how it will go. BTW, congratulations on your first post! 

  • While recording videos in iPhone 5, I am not getting sound playback.

    While recording videos in iPhone 5, I am not getting sound while playing it. How to resolve this issue? Please help. Thank you.

    Hi manu1982,
    Welcome to Apple Support Communities.
    It sounds like your iPhone has a no sound from the speaker issue. The article linked below provides a lot of great troubleshooting tips that may be able to resolve the issue.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    I hope this helps.
    -Jason

  • Audio from a recorded video

    I record a video with my playbook and the only audio is pulsating static. My son's playbook is doing the same thing. Restarting it doesn't help. How do we fix this?

    Hello tdmjesmom,
    Welcome to the BlackBerry Support Community.
    Thank you for your question regarding static audio for recorded video on your BlackBerry PlayBook tablet.
    Does this occur on any newly recorded video? Have you also tried powering the device off and back on by holding the red power button for 10-15 seconds?
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • I work for a teaching hospital. We are using groups of 20 to 30 iPads for access to patient electronic records, video conferencing software, and other, HIPPA compliant apps. I need to be able to access the iPads to shut down and erase in case of loss.

    I work for a teaching hospital. I have started a program to place Physicians and key support personnel on iPads for electonic medical records, video conferencing software, and other HIPPA compliant issue. I have a need to have one central program that can push out updates, other information, but most importantly, can erase the iPad in cases of loss or stolen. Can anyone direct me to such software.
    Thanks,
    Wayne Hodges

    The Mac mini does have somewhat powerful specs at top end.
    Mac mini with OS X Server features a 2.3GHz quad-core Intel Core i7 processor that delivers incredible speed and performance, thanks to innovations like Turbo Boost 2.0, Hyper-Threading, and an integrated memory controller. Add in 6MB of L3 cache, and you’ll find that Mac mini with OS X Server is packed with power.
    http://www.apple.com/mac-mini/server/
    Here is  a list of  mdm's:
    MDMs
    Airwatch, Meraki, MobileIron, OS X Server, or Zenprise
    Airwatch
      http://www.air-watch.com/
    Meraki -- A free MDM   [ expect lots of email and phone calls about upgrades ]
      http://www.meraki.com/products/systems-manager/
      https://discussions.apple.com/thread/4067210?tstart=0
      Good howto by Sergio Sosa.
      https://discussions.apple.com/thread/2594001?start=15&tstart=0
    MobileIron
      http://www.mobileiron.com/
    Zenprise
      http://www.zenprise.com/

  • IPhone showing crazy colors on screen when recording video?

    I seem to be having a problem with my iPhone when I go to record video. I get this crazy colored looking screen (it shows up in the video and you can see it on screen when recording). Any ideas as to how to fix this?
    Thanks in advance,
    David

    Hi David 14,
    Thanks for using the Apple Support Communities. I understand that you are experiencing issues recording video on your iPhone. If you haven’t already done so, I would recommend forcing the camera application to close and restarting your device:
    Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/HT203040
    2. Force the app to close, then open the Camera app again.
    3. Restart your device, then open the Camera app again.
    - Matt M.

Maybe you are looking for