Recording view in results recording

Hi all,
I have used 89 insp type for manual lot and in results recording i want the tab that unit to be inspected . In develpement it is coming .but in prod sever it is appearing and in production also for some insp types it is coming why .
please suggest settings .
regards
prasad

Hi arun,
alredy i did the setting in IMG for that 89 insp type .even though it is not appearing .
now my query is if we did not do that setting also i think tab should be appear.but curser will go to other tab.
please correct if I am wrong .
plz suggest me how to do get the tab.It is very urgent for me .
regards
prasad
Edited by: prasad.k on Apr 2, 2008 4:08 PM
just now i have seen that message is giving by the system:
*view for characterstic overview was changed *
if you see the details of that message that like follow----
View for characteristic overview was changed
Message no. QE044
Diagnosis
The predefined view from the operation or inspection type has been changed by the program. This may be due to the following:
In the user master, a recording view is assigned to the user parameter 'QER'. If there is no default value for this user parameter, the general view (single values and summarized results) is used.
The determined view is marked as obsolete.
Procedure
The user parameter 'QERSMAL' must be initialized to be able to use obsolete recording views. You cannot delete the user parameter from the user master.

Similar Messages

Displaying only the newest results below. To view all results, narrow your query by adding a filter.

Hi,
In one of my list there are 33,000 records.
It gives message "Displaying only the newest results below. To view all results, narrow your query by adding a filter."
I don't want to change my threshold limit. Can anybody please tell me steps to resolve this issue?
Regards,
Amit Khatri

I have a list of 11,000 items. Even though I have setup filters on it and it shows all 10 records based on that filter, it still shows that warning on top. For some items, even with those filters, I don't see the list items at all. How do I deal with
this situation. I don't want to change my threshold limits from CA either. Please help.
MAK

View requests result should open in new browser window

Hello !
I am new in OAF. And I am tired of looking forsolution...
I have a requrement. In the "Request Monitor" page, requests result should open in a new window. It means that each user's click on "View request result" should open in a new browser window.
I have found url like this in access.log:
OA_CGI/FNDWRR.exe?temp_id=1069558080
This url returned from package : fnd_webfile.get_url. And this package is used in about 30 java files...
And I do not know which one of these files is used in my page...
Finally, I want to add ' target="_blank" ' to result html code. Like this:
Maybe It can be done a more simply way?
Thank you!
P.S. Here java files:
Which one is used in "Monitor Request"???
oracle\apps\az\util\CpLogViewUtil.java
oracle\apps\fnd\cp\fileops\
FileConstants.java
FNDFSFileFetch.java
oracle\apps\fnd\cp\request\
RemoteFile.java
oracle\apps\fnd\cp\util\
RemoteFile.java
oracle\apps\fnd\cp\viewreq\server\ViewRequestAMImpl.java
oracle\apps\fnd\oam\bizexcep\handlers\
BflowContextDetailsHandler
oracle\apps\fnd\oam\bobj\activity\
FRDLog.java
oracle\apps\fnd\oam\bobj\adconfig\
AppsCtxtCompFileList.java
AppsCtxtFiles.java
oracle\apps\fnd\oam\bobj\manager\crm\
CRMProcessLog.java
oracle\apps\fnd\oam\bobj\manager\views\
ICMProcessLog.java
ManagerProcessLog.java
oracle\apps\fnd\oam\bobj\requests\views\
RequestView.java
oracle\apps\fnd\oam\cp\fileops\
FileConstants.java
FNDFSFileFetch.java
oracle\apps\fnd\oam\launchMode\restricted\handlers\
RestrModeHandler.java
oracle\apps\fnd\oam\sdk\util\files\
FNDFSUtil.java
oracle\apps\fnd\oam\sdk\util\log\
LogHandler.java
oracle\apps\fnd\oam\sdk\util\support\
AppsSignatureNode.java
oracle\apps\fnd\oam\servlet\ui\handlers\activity\
DatabaseSessionHandler.java
FRDFilesListHandler.java
FrmSessionHandler.java
oracle\apps\fnd\oam\servlet\ui\handlers\adconfig\adv\
AdvCfgNode.java
oracle\apps\fnd\oam\servlet\ui\handlers\debugwb\
SearchPGHandler.java
oracle\apps\fnd\oam\servlet\ui\handlers\gsc\
SvcCompDetailsHandler.java
oracle\apps\fnd\oam\servlet\ui\handlers\request\
CpRequestHandler.java
oracle\apps\fnd\oam\servlet\ui\handlers\services\
ServiceProcHandler.java
ServiceStsHandler.java
oracle\apps\fnd\wf\oam\bobj\util\
WfQuery.java
oracle\apps\fnd\wf\oam\handlers\
WfComplWorkItemHandler.java
Edited by: rsn on 01.12.2010 15:43
Edited by: rsn on 01.12.2010 15:46
Edited by: rsn on 13.05.2011 11:27

Anand, thank You very much!
"In your page, is "View request result" a link ?
If yes then
click on "Personalize Page" link which is at the top right corner of the page. Select "Complete View" radio button and click on "Expand All" link. Search for item "link". If your page has more than one link then choose the link item which is related to "View request result". Click on "Personalize" pencil icon corresponding to "link" item/region. Change the "Target Frame" property value to "_blank" under "Site" level. Click on "Apply" button.
-Anand"
This is a great power in "Personalize Page"!
I make solution in this steps:
1. Activate personalization to user, by setting profile "Yes" value on user level:
Personalize Self-Service Defn / FND_CUSTOM_OA_DEFINTION
2. Personalize 2 regions items (Image & Link)
( Don't ask me how !!! ;)
Image have not Target Property. I move URI to Link Region Item and remove in step 4 from Image Region Item.
3. Export page and my region
java oracle.jrad.tools.xml.exporter.XMLExporter /oracle/apps/fnd/cp/viewreq/webui/CPViewRequestPG -rootdir $APPL_TOP/personalizations -username apps -password *** -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp) (host = localhost)(port = 1521)))(connect_data = (sid = prod)))"
java oracle.jrad.tools.xml.exporter.XMLExporter /oracle/apps/fnd/cp/viewreq/webui/customizations/site/0/CPViewRequestPG -rootdir $APPL_TOP/personalizations -username apps -password ***-dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp) (host = localhost)(port = 1521)))(connect_data = (sid = prod)))"
4. Modify in notepad /oracle/apps/fnd/cp/viewreq/webui/CPViewRequestPG.xml (remove URI from Image Region Item) from this file.
5. Install script script for PROD like this:
cp -R personalizations $APPL_TOP
java oracle.jrad.tools.xml.importer.XMLImporter $APPL_TOP/personalizations/oracle/apps/fnd/cp/viewreq/webui/CPViewRequestPG.xml -username apps -password *** -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp) (host = localhost)(port = 1521)))(connect_data = (sid = prod)))" -rootdir $APPL_TOP/personalizations
java oracle.jrad.tools.xml.importer.XMLImporter $APPL_TOP/personalizations/oracle/apps/fnd/cp/viewreq/webui/customizations/site/0/CPViewRequestPG.xml -username apps -password *** -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp) (host = localhost)(port = 1521)))(connect_data = (sid = prod)))" -rootdir $APPL_TOP/personalizations
6. After install on PROD, You need to "bounce the apache". Additionally, it need to modify / upply button once on a region link. Right now I can not explain exactly, how it helps... But finnaly changes after 'XMLImporter' command will applyed after modify / upply manipulations.
Edited by: rsn on 13.05.2011 11:16

I'm wondering if there is any way to view the results of the form other than in a spreadsheet? Is it possible to print responses one by one in PDF format, or word, etc? I'd like to create a form for proposal applications, and the spreadsheet format resu

I'm wondering if there is any way to view the results of the form other than in a table? Is it possible to print responses one by one in PDF format, or word, etc? I'd like to create a form for proposal applications, and the spreadsheet format results are nearly unusable for this type of form.

Hi Nalani500 ,
Yes, you can print the response in a PDF by following the steps suggested below.
1) Go to the response file
2) Select the response you want to print
3) Click on Save as PDF button and it would save the selected response in PDF format.
Thanks,
Vikrantt Singh

Getting a "Displaying only the newest results below. To view all results, narrow your query by adding a filter" message in error

I have a list with almost 10000 items. I have a view that should be returning 8 items. For me, the Farm Admin, I see the full set of expected values. The message "Displaying only the newest results below. To view all results, narrow your query by
adding a filter" shows for other users. This makes no sense -
there ARE filters on this view. I'd rather not increase the throttle limit.
Anthony Kelly

Hi Ajk,
Check that the list is not scoped by an audience; but, I'm afraid that either way admin, (e.g. non Farm admin or site collection admin)
I'd recommend exporting to excel, create two new spreadsheets and then import as custom lists.
Best of luck and cheers,
Stacy Anothersharepointblog.blogspot.com

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, and the safe search button is inoperable. Suggestions?

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, the remainder of the results page is blank, and the safe search button is inoperable. When I turn off private browsing and refresh the page, everything works again.
Anyone else having this problem?

I have got the same behaviour after the last Safari Update to 5.1.3. It seems that Safari now handles some scripts in a new way. If you debug the Google Website, you will see, that there is some Javascript Error, that seems to prevent to write into local cache. After some searching I wasn't able to finde a solution for this problem, other then disabling Javascript while private browsing to prevent the script loading. You then are able to use Google with the old layout. The option to disable JavaScript can be found in the Menu "Developer", wich has to be enabled in Safari in the options first.
In my opinion this is a bug that is now occuring, because Apple changed something in private browsing and that has to be fixed by Google now, to run again. Or we will have to wait for 5.1.4, as you can read online Apple will change and bugfix the javascript engine in that version, perhaps this fixes the problem as well. I hope so!
If anyone is in the developer program perhaps you could test this with the beta of 5.1.4 and tell us if it works.

Cannot Display Graphic in Viewing Model Results

In our project, we use a clustering model. After having trained the model, we try to view model result in graphic such as Influence Chart. Unfortunately, this problem occurs.
<u>Note.</u>
when clicking 'Inter and Intra Cluster Distances Information,' we find the error message 'Error displaying additional information about clusters.'
<u>Details of this message</u>
Diagnosis
Error occurred while generating graphs for displaying the additional clustering information.
Procedure
Ensure that the RFC destination IGS_RFC_DEST is configured to 6.2 or above version for the Internet Graphics Server (IGS).

If you have reimported the model or removed/added the controller to view context, the binding would have broken. Make sure you see the outward arrow visible on the model attributes of view context exist, otherwise rebind the context to component controller or custom controller structures.
Another tips is
You can try to display the size of the BAPI return output object, if it's 0 then there is no data returned. I mean in the component controller you would have written retrieve method to fetch data from backend
wdContext.node<your BAPI>_Input().
current<your BAPI>_InputElement().
modelObject().execute();
After executing above code, check your output object return code or message lines or a structure object size information. If nothing is returned then there is a problem, sometimes return code and message lines will return something if your backend BAPI is executed.
Or as above posted suggested put external breakpoints in your BAPI and make sure the input parameters are correct.
Hope this helps
Praveen
Edited by: Praveen11 on Oct 21, 2009 8:58 AM
Edited by: Praveen11 on Oct 21, 2009 9:06 AM

Disable View PDF Results not working

I am using Adobe 9 with Windows 7 and I am trying to disable View PDF Results via printing preferences. Everytime I uncheck the box to View PDF Results, it does not stay unchecked. It is driving me nuts. I have searched this forum and a few others had this issue but there were no solutions posted. I had this issue once before but I cannot remember how I fixed it because I think I fixed it by accident.
Thanks
Justin

Anyone have any idea how to fix this issue?

Viewing the results of a "Data Retrieval Rule"

Viewing the results of a "Data Retrieval Rule"
RC2008.3 SANDBOX
ORACLE 10g
Websphere 6.1
IE6 & 7
Hello:
Does anyone know if there is a log available that will show the SQL that is sent to the server during a DataRetrievalRule?.
I had my rule working at one time, and now my values are returning blank.
So I am hoping that there is a log somewhere so that I can see what is going on.
thank you
Daniel
Safeway Inc.

The idea here is to not drag and drop a datastore as a target, but to create this datastore directly in the interface. You can then use this interface as source of another interface.
here is the doc... Let me know if you need more help.
Target Datastore
An interface can have only one target datastore. There are two possibilities for this datastore:
A permanent datastore, corresponding to a datastore that already exists in a model.
A temporary datastore, that does not yet exist in a model, and which will thus be created dynamically by the interface, in either the work or data schema of the logical schema of the Staging Area specified on the Definition tab of the interface.
The target datastore, with the mapping for each column, is displayed on the right of the Diagram tab.
To edit the properties of the target datastore, click on the datastore title. The properties panel will appear at the bottom of the window.

Tcode to view payroll results....

what is the Tcode to view payroll results(RT n CRT).

Hi,
Try this TCODE: S_AHR_61015890.
Or, you can search other TCODE here:
1. Goto SAP MENU
2. Select Human Resources.
3. Select Payroll
4. Select Your Nation
5. Select Info System
6. Subenu in here different for each country.
After that you can select any TCode that you need.
Notes:
<i>Each Nation/Country has different TCODE.
S_AHR_61015890 for Indonesia
S_AHR_61015969 for Malaysia
PC00_M40_ANN for INDIA</i>
Regards,

Error with View Quality Results in workorder

Hi All
When I do a View Quality Results for a workorder, getting error :
"Error - no data found for region (/oracle/app/qa/region/ )
Please suggest
Thanks,

please post applicaation release Db version and os platform
did you bounse apache?
was this working before or first time?
steps to reporoduce the issue ?
please see this
No Data Found For Region () When Searching Item In IProcurement [ID 1521355.1]
No Data Found for Region IRC_VACANCY_EDIT_REVIEW_PAGE Error When Updating an Approved Vacancy [ID 809593.1]
No Data Found For Region When Entering QA Results From EAM [ID 1327150.1]
Unable to view Quality Results, You have encountered an unexpected error. Please contact the System Administrator for assistance. [ID 799707.1]
AppsMAsti
Sharing Is Caring

Viewing errors resulting from automated user replication

hi guys
pls tel me how to view errors resulting from automated user replication
regards
kamal

Does it not appear in default trace?

Need Tcode for viewing payroll results

what is the Tcode to view payroll results(RT n CRT).

Report RPCEDTx0 prints out payroll results (x=country indicators).
use t-code PT66 to display the cluster details that is results table
reward

Alt ways to view quiz results

Hello, I was wondering if there was an alternative way to view quiz results. I know that you can view data through the app that comes with captivate however I would like to view my data on the web and mabey style it a bit differently. What do you guys think the best solution for that would be?
Thanks

Unless you're willing to implement Moodle or some other web-based LMS, you would need to build your own web-driven database solution. If you're a web developer with database and web scripting skills, this should be doable. If you're an average Captivate user, it's probably outside your abilities.

Inconsistent view object result set (REPOST ... no response since 23/07/2002)

(1)In JSP front-end, I have the following code:
<%
ComUtil c = new ComUtil();
String sAppConfig = c.getAppConfigStr();
%>
<jbo:ApplicationModule id="am" configname="<%=sAppConfig%>" releasemode="Stateless" />
// A datatag is put here to print out a combo box for user selection with all places defined in table
<MyTagLib:PrintSelectForAllPlaces strTagName="v_CheckPlace" strAmId="am" blnDisplayHyphen="false" />
<jbo:ReleasePageResources />
(2) The ComUtil.getAppConfigStr() code is as follows:
// Configurations parameters
String _cfPkg = "MyPkg"; // Configuration package name
String am = cfPkg + ".MyAppMod"; // Fully-qualified application module name
String _cf = "MyPkgAppModLocal"; // Configuration name for connection info
String IP_ADDR = "xxx.xxx.xx.xxx"; // x stands for number
String SID = "MySid";
String PORT = "xxx"; // x stands for number
/** Connection string used by front-end JSP for Jbo to obtain configuration name for
an application module **/
public String getAppConfigStr () {
// Create an instance of the application module by name, using local mode
String sAppConfigStr = am + "." + cf;
return sAppConfigStr;
(3) My data tag code:
public class PrintSelectForAllPlaces extends TagSupport {
public int doStartTag() {
ViewMyPlacesRowImpl r = new ViewMyPlacesRowImpl();
ComUtil c = new ComUtil();
ApplicationModuleRef amRef = Utils.getAMRefFromContext(pageContext, strAmId);
ApplicationModule am = amRef.useApplicationModule();
JspWriter out = pageContext.getOut();
try {
ViewObject vo = am.findViewObject("ViewMyPlaces");
if (vo != null) {
vo.executeQuery();
int j = 0;
out.println("<select name=" + strTagName + " " + strActionList + ">");
if (blnDisplayHyphen) {
out.println("<option value = '' selected>--</option>");
while (vo.hasNext()) {
r = (ViewMyPlacesRowImpl)vo.next();
String sPlaceCode = (String)r.getPlaceCode();
String sPlaceDesc = (String)r.getDescription();
out.print("<option value = '" + sPlaceCode + "' ");
System.out.println("sPlaceCode: " + sPlaceCode);
if (strDefaultValue != null) {
if (strDefaultValue.length() > 0) {
if (sPlaceCode.equals(strDefaultValue)) {
out.print("selected");
out.print(">");
out.print(sPlaceDesc);
out.println("</option>");
out.println("</select>");
} else {
out.println("View object not found! ");
} catch (JboException je) {
je.printStackTrace();
} catch (IOException ioe) {
ioe.printStackTrace();
return SKIP_BODY;
My question:
- When i run my jsp, sometimes 2 rows are retrieved, sometimes 3 row are retrieved, sometimes all are retrieved, which can be simulated by 'Refreshing' the jsp page. I feel quite upset as this affects my whole application seriously. Would anyone give me any idea about my case?
(I have tried to re-make and re-compile the project; synchronizing my table structure; and also tried vo.clearCache(); but still no use. Moreover, The retrieved resultset supposed to be a reference table which will not change frequently, which means that caching is not serious affected.)
My case is quite urgent to me. In case of any ideas, please don't hesitate to let me know.
Thanks a lot for your replies!

Dear Shailesh, would you please give me some guidelines for how to generate diagnostic outputs for BC4J? I don't know how to run the function, which may be very helpful for debugging. ^v^
Regarding the problem I mentioned, more details are listed as follows:
1. My mentioned table has 5 rows in total.
2. My expected result set has 4 rows, which is filtered by the Query statement:
- SELECT PLACE_CODE, PLACE_DESC FROM PLACES WHERE DISPLAY_FLAG = 'Y';
3. Why I know the retrieved row is not equal because the program code line in my first post for this topic:
System.out.println("sPlaceCode: " + sPlaceCode) is embedded in the loop within while (rs.hasNext()). Sometimes the output like this:
sPlaceCode: PLACE1
sPlaceCode: PLACE2
sPlaceCode: PLACE3
Sometimes like this:
sPlaceCode: PLACE1
sPlaceCode: PLACE2
4. It is in random behavior.
The situation has been improved after I have 'Test' the BC4J view, that I have navigated all records. Then, the time of displayed all expected records has been increased. Such a mystery ... What I am feeling worried is that, I can't navigate all the time for my reference tables ~~~ besides, it still shows the same problem until now.
My Requests:
1. Please give me the guidelines for generating the diagnostic output.
2. Please help to investigate my mentioned problem.
Thanks so much for your help and replies!

Recording view in results recording

Similar Messages

Maybe you are looking for