Recording vocals and guitar at the same time, using the Alesis IO dock!

Hi there!
I have an Ipad 2 with the newest OS installed etc. And I rea the other posts in here.
I bought an IO dock from Alesis the other day and was full of exspectations, but I got a bit disappointed -> Garageband! When I bought the Ipad dock I exspected that I would be able to record (or just play and hear the inputsound from two devices) at the same time in my headphones! But I wasn't... Now I'm wondering if this is going to be fixed in an update or not? I think it would be a shame if this issue isnt adressed, due to the huge abilities the Ipad/garageband/Ipad docks withhold.
So anyone know anything? I went to my musicstore and spent about an hour or so with the tech dude there trying dfferent setups, but unfortunatly without luck! Just to clarify that I didt just plugged in my guitar and got mad that it wasnt apple intuative!
Hope someone can help :)

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Similar Messages

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?... or could I chain the the current mac pro to a mac mini to make that happen?

How do I read and write at the same time using the NI-CAN channel API?

Here's the situation. I have one CAN bus, and I need to read and write channel data (using the channel API) at the same time both at an interval of 20 ms. It's easy to do one or the other using the channel API, but you can't setup a channel task to do both. It's either input or output, not both. Is this even possible?

Hi,
yes , this is possible. But you have to create two tasks, one for input and one for output. see the attached example for LabVIEW.
If you download and install NI-CAN 2.4 you will get this example and one for C and VB as well.
DirkW
Attachments:
Single Sample Input Output same Port.vi ‏79 KB

How can i connect to a LAN and external display at the same time using the mini-displayport?

Hi all,
At work i'm connected to the Lan via an adapter and the mini displayport. I want to use my external display at the same time, which use the same mini displayport. Are there any splitters available to use both at the same time? Are there any other alternatives?
Thanks,
Dennis

There are USB to ethernet dongles:
http://store.apple.com/us/product/MC704ZM/A/apple-usb-ethernet-adapter?afid=p219 %7CGOUS&cid=AOS-US-KWG-PLA

I can't measure many signals at the same time using the DAQCard-AI-16XE-50.

I'm using a Compaq Presario 1655 laptop with a DAQCard-AI-16XE-50 on the PCMCIA slot, and LabVIEW 6i and MAX 2.0.
I have a SCXI-1001 Chassis with SCXI-1122 and its terminal block SCXI-1322 installed (I have others too).
I'm trying to measure some signals at the same time, for instance, measuring 2 load cells signals, and a frequency of an indutive sensor (using the analog way with the "Extract Single Tone Information.vi").
I realized that I can't measure at the same time my signals, neither the load cells - a 10608 error occurrs "NI-DAQ LV: No transfer in progress for the specified resource".
What's the problem?
Some DAQCard limitation? Configuration?
Thanks!

Hello;
By your description I'm assuming you are trying to read those analog inputs in parallel. The SCXI-1122 doesn't have that feature. All the analog inputs will be multiplexed to one single Analog Input channel on your DAQ board. If you need to make measurements in parallel, you need to use one of the SCXI modules that allows that operation. For more information on what modules support that operation, you can always refer to our home page at www.ni.com.
Hope this helps.
Filipe
Applications Engineer
National Instruments

Is there a way of resizing the contents of multiple bounding boxes at the same time using the number fields in the tool bar?

I'musing cs6 and need to resize an image and two text boxes to a specific pixel width.
I try selecting all of the boxes and punching in 960 px in the resizing field in the tool bar but only the bounding boxes and not their contents get resized...

Use the horizontal scale field (and include the units) rather than the width field.

If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

Hi John,
I think the only way is to get an iMic...
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=797644&is=REG&Q=&A=detail s

Am trying to record a basic guitar track while I sing along. I don't want my vocals to be recorded at the same time but the internal mic seems to be picking up the vocal and guitar sounds. I tried System Preferences, Sound, Line In - Audio Line Input.

I am trying to record a basic guitar track while I sing along. I don't want my vocals to be recorded at the same time but the internal mic seems to be picking up the vocal and guitar sounds. I tried System Preferences, Sound, Line In - Audio Line Input. It seems to be a common problem in Garageband for the Mac, ipad and iphone.

for me it turned out that the jack into the iMac was loose. Once I fiddled with it everything worked okay

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of A

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of Adobe InDesign CC (10.1). You must use that version or later to open the file." AARRGGHH! So how do I access the file?

Sounds like you opened and saved it in CC, so now you need to go back to CC and either complete the project there, or export to IDML to take it back into CS6.

Is there a way I can stream video from my 2012 AirMac to the Apple TV using airplay and at the same time stream the audio to an air speaker?

Is there a way stream video from a 2012 MacBook Air to a TV using Apple TV and at the same time steam the audio to an air speaker. Also the same question but using an ipad

You can try one thing. Follow these steps:
1. On your Mac, turn on AirPlay Mirroring and connect it to the Apple TV, so audio and video will stream from the Apple TV.
2. Turn off the sound of the TV where you have connected the Apple TV.
3. Then, make sure that you have turned on the AirPlay speakers. Then, open System Preferences > Sound > Output, and choose the external speakers, so sound will stream from these external speakers.
This should work correctly

I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

Please post (a relevant section of) it right on this Forum.

How i can wacht video clips in my mac and the tv at the same time trough the apple tv

how i can wacht video clips in my mac and the tv at the same time trough the apple tv

Welcome to the Apple Community.
Unfortunately you can't do that.

Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track.

Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track. i don't know if anyone has the same problem, but i haven't sync my ipod touch 4 gen to my i-tune playlist for the longest time, cus i was afraid to transfer the problem to it since i have a pc (win 7) but not MAC.

i am sorry, guys, but I really really really need you guys' help. if u know ANYTHING...

How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

Go to the Info inspector for the still image and in settings select the alpha type.

How to bind to a dataset and at the same time trim the text?

Hi,
I want to bind a listbox to a dataset, and the text value in the dataset is not always trimmed.
Dim dsCity as dataset = GetListOfCity()
ListBoxCity.DataSource = dsCity
ListBoxCity.DataTextField = "CityName"
ListBoxCity.DataValueField = "CityID"
ListBoxCity.DataBind()
I would like to ask if there is any handy way for me to bind to the dataset and at the same time, trim the text "CityName" when we are binding to it?
Regards,
Xavier

Hi Xavier,
Just as Uri Dimant said, we can use the Trim or Replace function in the textbox to trim leading or trailing spaces of any string. For example, we can use those functions as below:
=Trim(Fields!FieldName.Value)
=Replace(Fields!FieldName.Value, " ", "")
Besides, those two functions can also be done in the query with SQL.
Reference:
http://venkateswarlu.co.in/MSBI/ssrs/SSRS_Common_Functions__Text.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Recording vocals and guitar at the same time, using the Alesis IO dock!

Similar Messages

Maybe you are looking for