Recording with video

Hi, I am trying to do a recording on my computer with Garageband. I have a m-audio fast track pro audio interface, and i hooked it up and it works fine.
But now i want to figure out a way to hook up my camera and take a video with the moving picture from the camera but the music from my audio interface. If you dont understand, i want something like funtwo on youtube. how does he get the good quality?
thanks...

You just sync the video and audio together in a video editing program like iMovie.
So you can play live while recording the audio and recording the video at the same time.
Capture the video you shot in your editor. iMovie, Final Cut, etc...export the audio and drop it into your video editor timeline and line the audio up with with the video.
If your cam records audio that can help you line it up. Or you can clap your hands on camera and sync the video hand clap with the audio hand clap. Or just visually line it up with your playing.
Or use what you have recorded and then like lip syncing play along with the piece while video recording. Then sync it in your editor.

Similar Messages

How do you sync sound from a digital recorder with video?

Can anyone tell me how to sync sound with video? Not a voice over but Voice recorded when video was shot. Voice was recorded on hand held digital recorder.

When you're shooting use the ciak , then when in imovie, sync the sound of ciak with the closing of it and you're done
If u havent's used , just seek for a sound or a part of speech witch is very evident to sing
Do it before cut video
hope helps
J

The sound is not recorded with video, Why?

I recently recorded a video for the first time and found no sound does anyone know what I have missed out on I have notused it since upgrading to OS7

Hi Phlupman,
If you are having issues with no sound on your videos, you may find the following article helpful:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Regards,
- Brenden

Ridiculously Awesome Sound Recording with Video

Although I was aware that the mic's on the 928 were touted to be better at recording loud music than most other phones out there, I never had a chance to put it to the test.
Last week I was at a small bar and recorded my friends band playing. I was really close to the speakers and they were fairly loud. I made sure to turn off the sound filter in the recording setting of the video. Just for comparison, I had my brother record with me on his Razr Maxx. The next morning I played the video back from my phone and plugged in some good earphones.
OMG! No distortion at all!!! Full clean bass!!! Full mids and highs!!! Crisp and Clear! My brothers sound on his recording was a huge distorted mess! Anyone else have similar experiences? TI wanna make sure this wasnt just some freak luck with video recording...

First, what is the file format, and its specs. for the remote recorder?
Though the rates of modern cameras and digital recorders SHOULD match 100%, in the real-world, they seldom do. This make perfect syncing a labor intensive process.
One should do tests between the cameras and the recorders, to find out the % or error. Then, adjust their Audio to match first. As an example, one user in the PrPro Forum tested his Panasonic cameras, and his Zoom recorders, and found that the Zooms were off by 0.04% constantly. To correct this, he used the Time Remapping (with Maintain Pitch checked), and would apply that adjustment to all of the Zooms' files - perfect sync.
As for the Waveform not displaying for your remote recorder, did you allow those files to completely Conform (creation of the CFA and PEK files, the latter is the Waveform Display)? See this article: http://forums.adobe.com/thread/726693?tstart=30
Also, you should be able to increase the vertical zoom of your Audio Tracks, and hence any Clips on them, by hovering the Cursor over the junction between Tracks, in the Track Header, and when it turns into a = sign, with up/down arrows, click+drag. Then, you should be able to find commonality in the beginning, to sync up to. Tip: for this critical work, toggle the Snap feature OFF, with the S key.
Good luck,
Hunt

Isight audio does not record with video

isight audio does not record with video

Welcome to the forum.
Can you provide us with a bit more information, please?
What OS version are you using?
What are the full specs. of the AV file, that is not Importing with Audio?
What Project did you set up, at New Project?
Exactly what steps were used to Import that AV file?
Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
Good luck,
Hunt

How do I sync a audio recording with video?

Hi,
I recorded a concert using my DSLR and a separate sound recorder. What is the easiest way to sync these two up in PE10? I had hoped that at the least I could compare the wave files of both the original recording on the camera with the separate recording. But PE10 only shows the wave file of the recording from the camera. The wav file from the recorder is just shown as a green bar. Any ideas?
cheers
bill

First, what is the file format, and its specs. for the remote recorder?
Though the rates of modern cameras and digital recorders SHOULD match 100%, in the real-world, they seldom do. This make perfect syncing a labor intensive process.
One should do tests between the cameras and the recorders, to find out the % or error. Then, adjust their Audio to match first. As an example, one user in the PrPro Forum tested his Panasonic cameras, and his Zoom recorders, and found that the Zooms were off by 0.04% constantly. To correct this, he used the Time Remapping (with Maintain Pitch checked), and would apply that adjustment to all of the Zooms' files - perfect sync.
As for the Waveform not displaying for your remote recorder, did you allow those files to completely Conform (creation of the CFA and PEK files, the latter is the Waveform Display)? See this article: http://forums.adobe.com/thread/726693?tstart=30
Also, you should be able to increase the vertical zoom of your Audio Tracks, and hence any Clips on them, by hovering the Cursor over the junction between Tracks, in the Track Header, and when it turns into a = sign, with up/down arrows, click+drag. Then, you should be able to find commonality in the beginning, to sync up to. Tip: for this critical work, toggle the Snap feature OFF, with the S key.
Good luck,
Hunt

Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

Read this
http://support.apple.com/kb/ts1583

Recording Camcorder video to DVD with Satellite 1900

I have just tried to record a video from my camcorder to a DVD-R but kept getting the message 'drive not found' My computer is a Satellite 1900 and happily plays DVD's. but would appear not to want to record them.
Does the type of DVD make any difference, is there a way to make the computer recognise the disc in drive E:
The video happily transfers from the camera to the computer and I can play it on the computer but cannot transfer it to a DVD disc, anyone with any ideas??

Hi
One question; do you have an DVD writer or only the DVD reader!?
Please be sure that you can also burn DVD with your notebook and not only view.
Second question; what burning applications did you use?
I use Nero and its my favorite burning program. It supports many burning modes and burns the medium with best performance.
Check it!

How can I record a video with LAbview?

Hi,
I have a question: How can I record a video with labview?
I have a camera (AXIS 221) connected via rj45 on PC. I see the video of the camera in a browser.
And I would to acquire the video in labview.
Could someone help me?
Thanks
Raf

Unfortunately I haven't any experience with this camera. Iguess, you should install API, then crete new VI, place ActiveX container (palette Container->ActiveX) on the Front Panel, then right mouse click, then choose Insert ActiveX object..., then found you camera object and select it and press OK. Then you probably can see image from the on the front panel. Also probably you will be able to get image data in array (how easy is it - depends from the camera API).
If you able to see image from camera in the Internet Explorer, then another method - you can put Microsoft Web Browser as ActiveX object, then you should also see the image. Disadvantage of this method - you will be not able to get image data.
Andrey.

Why my videos recorded with the camera are not saved in the video app? It is saved like a photo.

Like the title says, why when I record a video, it is saved like a photo and not like a video. I mean that if I go in video app, I can't see my video that I just recorded, I have to search in my photos, but this is a video. I don't understand.
Thanks

Pictures and videos you take on the pad are saved in the camera roll. That's just where they go. If you select it, it should show with a play button to play the video.
If you sync it back to your computer, edit it and change it, then save it as a video, it will sync back to the pad as a video.

Turning on/off the flash while is recording a video in iOS 6 with an iPhone 4?

As the title says, from iOS 6 the turn on and turn off flash while I'm recording a video is gone.
I have an iPhone 4, but I think the problem is with the iPhone 4S too.
Could someone confirm that is a "new feature" of the magical and beautiful iOS 6? (sarcastic)
Thanks

Sorry for being insistent, but are you sure that you can turn it on and off WHILE you're recording the video??? Since I'm able to enable or disable it before start recording, after that, the opcion in the corner disappears.

No audio with video recordered by camera

Hello!
I have problem with recording a video by camera, there is no audio or any clear sound for the video i have recorded!!
Help please!

Note that there are a lot of popular extensions that can cause issues with videos not working apart from issues with the Flash plugin.
In what way is the navigation not working properly?
Can you give some examples?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

Recording streaming videos with sound

Can I use quicktime for recording streaming videos with sound? If not which Apple software can do it?
Bye Christof

You can use Quicktime to record streaming video +with it's audio+ by using a very simple trick. Using the same cable you connect your iPod/iPhone to your car's stereo system, connect your Mac's Audio OUT to its MIKE IN jack. I used FILE / OPEN URL to select the video stream source, then selected FILE / NEW SCREEN RECORDING. In the resulting 'Screen Recording' dialog box, I set the AUDIO slider all the way to the right, and under the arrow to the right, selected "Built-in Input Line In" for the microphone. I then used the appropriate controls to play the stream and record it. The resultant file was very acceptable. Good luck.

I have adobe creative suite 5.5 and have just bought a Sony Video Recorder with 4K. What preset should I use for importing video footage? Alternatively do I need a more recent version of the software?

I have adobe creative suite 5.5 and have just bought a Sony Video Recorder with 4K. What preset should I use for importing video footage? Alternatively do I need a more recent version of the software? If so, what version do I need and can I download it from Adobe.

I have adobe creative suite 5.5 and have just bought a Sony Video Recorder with 4K. What preset should I use for importing video footage? Alternatively do I need a more recent version of the software? If so, what version do I need and can I download it from Adobe.

I have 3 DVDs with videos recorded in mpg format. My Mac will not play them and says I may need to download software. Does anyone know what to do to play the DVDs.

I have 3 DVDs with videos recorded in mpg format. My Mac says it cannot play them and I may need to download additional software. Does anyone have any suggestions on what to download or do to play them?
naomifromnewyork

VideoLAN - Official download of VLC media player for Mac OS X

Recording with video

Similar Messages

Maybe you are looking for