Recording without reference to tempo and quantising later?

Hi,
Can you record a software instrument (piano mainly) without referring to the project tempo, and then use this track as template from which all subsequent midi and audio will be quantised.
I ask because my best takes are always when I record in 'free form', without reference to a click track. I have tried writing in tempo changes and playing to them, but it is not ideal, as you end up listening to the tempo track instead of what you're playing.
I'm not sure, but I don't think a groove template is what I'm needing, because other tracks must lock to the initial track - with all its various tempo variations - from the start of the song to the finnish.
Penny for your thoughts folks.
Stormyboy

Hi,
I'm told by people on the Logic forum that the initial track has to be 'Beat Mapped'. Subsequent tracks should lock to this with a bit of fiddling.
Cheers,
Stormy

Similar Messages

  • Invoicing without reference to PO and contract?

    Hi all,
    We are implementing Invoicing without PO (direct to contract) in SRM 7 with ECS and ECC Ehp5, with the functionality Central Contract Management.
    While testing this scenario, we noted that:
    - It's possible to create invoices with no reference to any document at all, which includes contract and PO. In our scenario the selection of a contract would be mandatory, and by filling the contract all the associated fields would be filled in invoice.
    - When we create an invoice, with reference to contract, in ERP side no invoicing document is created at logistic side, only at financial side (document type RE). In our scenario the invoicing document would be created at both sides.
    Is it normal to get these results? The results that we anticipated in our scenario are viable to implement?
    Thanks in advance.
    Best regards,
    João Salgado

    Hello,
    João Salgado wrote:
    We are implementing Invoicing without PO (direct to contract) in SRM 7 with ECS and ECC Ehp5, with the functionality Central Contract Management.
    This means MM module is implemented?
    If MM is implemented, it is not possible to post billing without reference to MM document directly in ECC (MIRO transaction).
    João Salgado wrote:
    - It's possible to create invoices with no reference to any document at all, which includes contract and PO. In our scenario the selection of a contract would be mandatory, and by filling the contract all the associated fields would be filled in invoice.
    - When we create an invoice, with reference to contract, in ERP side no invoicing document is created at logistic side, only at financial side (document type RE). In our scenario the invoicing document would be created at both sides.
    On ECC side, for me, creation of MM invoice in direct reference to a contract (this means, without a PO) is not possible. Maybe enhancement package covers this need?
    So, i guess you use Central Contracts?
    Regards.
    Laurent.

  • Outbound delivery without reference and customer-material info record

    We use outbound deliveries without reference (L0). Several customers want their own material number printed on the delivery notes.
    So we considered using customer material info records. Unfortunately, the customer material number is not copied from the customer material info record into the outbound delivery position.
    Do any customizing settings exist that we might have overlooked? Or is this behavior a "feature"? Any hint would be highly appreciated.
    Best regards,
    Gerald

    Hi Gerald,
    have you ever figured a solution for this issue?
    I'm now facing the same issue and could need some support. I found some documentation for the USEREXIT_CUST_MATERIAL_READ, but I don't know whether that could be used as a solution.
    Please let me know or if anybody else knows something, please feel free to chip in your knowledge!
    Thx & regards,
    Bobby

  • How can I change the tempo (and the snap grid) of the project without altering the duration of the original audio clips?

    This question is for Logic Express.
    I have many very short audio clips that I recorded into my project.
    I want to adjust the project tempo so that I can use the snap grid to make a beat out of my short audio clips. But when I change the project tempo, it automatically adjusts the lengths of my audio clips.
    So how can I change the tempo (and the snap grid) of the project without altering the original audio clips?

    The reason some files sound funny and others don't is because audio is handled a few different in Garageband depending on it's source (audio your recorded vs Apple Loops vs non Apple Loop pre recorded audio). Each of these have different color regions with different properties.  I just found this thread that might better explain it:
    http://hintsforums.macworld.com/archive/index.php/t-67538.html
    I hope that helps!

  • Create delivery without reference and without movement

    Dear All,
    I have a requirement to create an outbound delivery without reference (the easy bit) but also without movement for normal "FERT" stock items.
    The reason for the requirement is we have a production planning plant set up and the receiving plant is s short distance from the manufacturing plant. The transport between locations involves public roads and the products being shipped can contain hazardous materials.
    The thought is to create a delivery without reference assign the materials and pack within the delivery, the problem is that as the movement has already taken place this delivery line item must not be relevant for movement.
    I have tried assigning text and non stock item categories without success so I am hoping someone out there can give me some pointers on possible solutions
    Many Thanks
    Brian

    In case I have understod u correctly then u need to create a OBD with material with stock but no goods movement shoudl happen
    can u create a new item category which is not relevant to picking and no sloc is requried and when u create the delivery then system will mark it as complete even w/o PGI.
    tcode 0VLP

  • I recently inherited a restored iPhone 5 from my uncle and its needs a sim to be activated, could i use my friends sim just to activate my iPhone and then give the sim back once its activated without affecting his contract and later on get a sim ?

    I recently inherited a restored iPhone 5 from my uncle and its needs a sim to be activated, could i use my friends sim just to activate my iPhone and then give the sim back once its activated without affecting his contract and later on get a sim for myself and a contract for me and it all be normal??? Thanks

    The phone MUST have a SIM present in order for activation to complete. The process will not finish otherwise.
    For the OP:
    If the iPhone 5 is locked to a carrier, you must use a SIM from that same carrier. Otherwise I think you would be OK borrowing the SIM to activate the phone.
    ~Lyssa

  • Is it possible to record and play at same time in swift, is there a option to record without storing the file

    I am making a microphone, is it possible to record and play at same time in swift, is there a option to record without storing the file

    Its pretty simple with FMS. You just need to do following things:
    Publish using FMLE with following settings: (just telling which are needed , rest you configure based on your needs)
    Video codec: H.264
    Audio Codec: <of your choice>
    Server ip: rtmp://<server-uri>/<app-name>
    Stream Name: mp4:<stream-name>.f4v
    Application : Server-side code
    application.onPublish = function(myclient,mystream){
         mystream.record();
    application.onUnpublish = function(myclient,mystream){
         mystream.record(false);
    Have a client , which subscribes in following live mode:-
    ns.play("mp4:<stream-name>.f4v",-1,0,true);   // this is subscribing in live mode
    In this way even if file is recorded, your clients are subscribing in live mode so all will be in sync.
    Now if you want to disallow any clients who will try to subscribe to "recorded" file when live event is going on, you can achieve using auth adaptor. (let me know if you want to enforce such requirement)
    But i think above solution solves your primary problem. Also please let me know if there are any issues in getting it work , i have given bare minimum which is required.

  • How to update and insert the records without using Table_comparison and Map_operation?

    How to update and insert the records without using Table_comparison and Map_operation?

    Use either join or MERGE see this Inserting, Updating, and Deleting Data by Using MERGE

  • Find debit and credit memos created without reference

    Hi Experts
    Could you please tell the easy way to find out credit memos and debit memos created without reference to oringinal order.
    Regards,
    Santosh

    hello, friend.
    try a query using table VBFA.  specify the document category in both preceding (sales invoice) and subsequent documents (debit/credit memos).
    this should help you.
    regards.
    p.s.
    in this particular case, in VBFA only credit/debit memos with reference to invoices will be displayed.  this can be compared to VA05.
    Edited by: jonathan y on Mar 27, 2009 1:22 PM

  • Hello, I have an iPod touch 4 generation. I have a problem that my PC is broken and I later forgot my password. How can I restore the system without a PC. Because I have receipts from the rest because I POD and

    Hello,
    I have an iPod touch 4 generation. I have a problem that my PC is broken and I later forgot my password. How can I restore the system without a PC. Because I have receipts from the rest because I POD and

    You need a computer with iTunes installed to regain use of your iPod.  Unless you have the iPod backup file from the syncing computer all you can do is to restore the iPod to factoery defaults/new iPod.  You will also need to place the iPod in recovery mode is you restore the iPod on other than on its syncing computer.  For reoverymode see:
    iPhone and iPod touch: Unable to update or restore
    Remember the passcode is a security feature.

  • Multiple recording without comping and/or cycling

    hello: i've recently upgraded to 8.0.2 and some important things have changed.
    for example: i record and edit around 12 drum tracks at the same time and for every song section i record more than 20 takes each. that is for many purposes. now before upgrading i usually enabled every track record button, cycle, punch in and replace buttons that way i could stack takes over and choose and edit what i wanted and with ease. now replace button is for destructive takes and i don't use it anymore, just cycle and punch in or just cycle but the problem is eitherway logic compiles takes and is a nightmare! for every compiled track there are a big number of takes, edit them or just erase them is a huge waste of time. it is useful if i record one track only as bass or guitar players do. can you help me out on this? i don't want comping or any weird pseudoupgraded tools. logic platinum 6.3.3 is way better than this......thank you....

    What you are wanting to accomplish, can be done, but it is not necessarily a simple task and is going to require at least a modicum of programming skill. Filemaker comes first to my mind as offering reasonably powerful data extraction and analysis capabiity as well as the ability to store the transactions in a database and analyze the data in an almost infinite variety of ways. However, this will require the services of a Filemaker analyst and programmer to create and maintain the system. Don't forget the system will need almost continuous maintenance and enhancement.
    If you can change the way you receive the orders, there is a large number of shopping cart systems offered by virtually every internet hosting firm that can be adapted to a wide variety of marketing activities and they maintain staffs of programmers to handle the adaptation and maintenance -- at a price. 

  • Downpayments with and without reference to PO

    Hi,
    Can anyone please give me business implications of Processing downpayments without reference to PO in PO field.
    In our system we have observed that many users are following practice of entereing PO number in Text field instead of PO field ( if downpayment has to be processed for multiple PO items).
    What could be cons of such practice?
    Thanks
    Manoj

    Hi Atif,
    Thanks for reply.
    We need to process some non PO downpayments as well so we cant make PO mandatory .
    But we see that this is resulting in users not giving PO reference for PO related downpayments as well.
    We want to know if this can cause some trouble in future?
    Thanks
    Manoj

  • Automatic PO form goods receipt without reference Movement type 501

    Hi,
    My client receive sample material from the vendor that is without reference to PO, but upon approval of sample the vendor has to make the payment for which i do not have the reference document number.
    To arive at the solution i wanted to generate automatic PO for movement type 501, for which i have checked the movement type settings, 501- automatic PO, i ahve maintained the info record, and during GR for movement type 501 i enter the vendor even than system is not generating any PO in backend, I have centraalised purchase organization assigned to the plant.
    can anyone suggest me if i am missing any settings,
    Suggestions willbe worth appreciating..\
    Thanks
    Sarf

    Hi,
    You need to configure the following steps for creating automatic PO in MIGO transaction.
    1.Activate the auto PO in Material and Vendor Master.
    2. Maintain the Info record.
    3.Assign the Standard Purchase organisation for the plant you want to create auto Po.
       Path: ENTERPRISE STRUCTURE-ASSIGNMENT-MATERIALS MANAGEMENT-ASSIGN STANDARD PURCHASE ORG FOR PLANT.
    4. Activate create PO automatically for movement type (101,501).
    Path: MM-INVENTORY MANAGEMENT AND PHYSICAL INVENTORY-GOODS RECEIPT-CREATE PURCHASE ORDER AUTOMATICALLY - here you can activate for the mvt type you want.
    5.In MIGO screen, goto menu Settings and click default values , you will get a screen where you can check the mvt type 101,501... are maintained in mvt type column. if not you just enter the mvt type which you want. and click adopt tab.
    6. Now you do GR using 501 mvt type and give the material and vendor ..
    It will work.
    Regards,
    abi

  • How movement type will be determined in Delivery without reference order

    hi gurus,
    i want to know what movement type will be determined in delivery type LO(Without reference of order) . i think in a normal delivery with referance to sales order movement type will be taken from the sales order schedule lines.  Incase of delivery without referencing an order whether system will use any movement type? if yes what movement type and from where the movement type will be picked up?

    When you create a delivery without referring to a preceding document, the system copies the following data into the document from the appropriate master records:
    Data from the customer master record of the ship-to party
    Data from the material master records of the delivery items
    normally schedulelines are determined by item category mrp type and schedule line.
    so it is determined by mrp type of the material

  • Navigate previous record,next record by entering key-up and key-down

    Hi ,
    JDeveloper11g_
    I am trying to solve of how to navigate previous record,next record by entering key-up and key-down in ADF Table.
    If any of you have this solution by JScript of Backing Bean please help me.
    Thanks
    zakir
    ===

    Hi zakir,
    I hope I understood your requirements correctly. You have an editable ADF table. You would like to use the up/down arrow keys to move from one row to the next/prev row of the same column. Since the Tab key moves the cursor to the right and Shift+Tab moves it to the left, now you want to implement the same thing but just up and down, correct? If so, try this.
    /** Javascript **/
    function detectKey(evt) {
        var inputText = evt.getSource();
        var id = inputText.getClientId();
        var start2 = id.indexOf(":") + 1;
        var end2 = id.lastIndexOf(":");
        var numValue = parseInt(id.substring(start2, end2));
        var evt2 = evt.getNativeEvent();
        arrows=((evt2.which)||(evt2.keyCode));
        switch(arrows) {
            // Up arrow
            case 38:
            numValue = numValue - 1;
            break;
            // Down arrow
            case 40:
            numValue = numValue + 1;
            break;
        var newStr = id.replace(/:\d:/, ':' + numValue + ':');
        var comp = AdfPage.PAGE.findComponent(newStr);
        if (comp != undefined) {
            comp.focus();
    /** Jspx. (Place a client listener on each inputText in the ADF table) **/
    <af:column .....>
      <af:inputText value="#{row.bindings.price.inputValue}" .....>
        <af:clientListener type="keyDown" method="detectKey"/>
      </af:inputText>
    </af:column>With this, you get to move Up/Right/Down/Left in the editable ADF table without using the mouse.
    References:
    http://thepeninsulasedge.com/blog/?cat=29
    af:clientListener attributes and methodes of event object in java script
    Regards,
    Chan Kelwin

Maybe you are looking for