Recording

I know there are programs such as snapz pro that capture whats on the screen, but ive heard that connecting a video camera to your macbook and opening Quicktime Pro allows you to record...
^ i dont know if this is true, but anyway--
Is it possible to connect a video camera to a macbook and record?
if so please tell me how.

I never try to record directly the screen to iMovie, but I try (on my eMac) to use the mini vga adapter to video (mini dvi to video on for your macbook $19.99), connect that to my handycam (set to video, not camera) and it will record everything that displayed on the handycam screen, and since I set the external monitor to mirror, it capture exactly what on my eMac screen.
After that, I open iMovie, and connect the handycam using firewire and import the clip to be edited, and add couple track of explanation words on audio track and I have a "tutorial" movie project for my friend that need it.
Good Luck.

Similar Messages

Error in creation of a condition record

Hi to all, I've this error when I try to create a condition record :
Implementation of Method FIELD_CHECK/DEFAULT_VALUE_SUGGESTION for BAdI /SAPCND/ROLLNAME for filter ZIUSERSTATUS is missing
Message no. /SAPCND/MAINTENANCE719
Diagnosis
Implementation of BADI /SAPCND/ROLLNAME or method FIELD_CHECK/DEFAULT_VALUE_SUGGESTION is missing for the filter characteristic ZIUSERSTATUS.
If, however, the implementation is correct (see BADI Interface Documentation) and active, there is an error in the condition maintenance layer.
System Response
An exception or error occurred because condition maintenance cannot check, convert or lock/unlock the fields of a condition record.
Procedure
Contact the department responsible for carrying out the missing implementation in the case of application fields in the customer namespace. SAP is responsible for SAP fields which are set in the field catalog (/SAPCND/CTFC) and delivered, and if the field is supported as a possible field in a condition table. SAP is also responsible for the implementation of usage fields for SAP applications, just as with condition technique fields.
In cases where SAP is responsible, contact your responsible support organization.
Could someone help me please ?

Hi I just put the coding:
e_was_executed = 'X'.
into every method and however it worked.
Best Regards

Whenever a record is Edited the rows are not getting displayed in the repor

Hi all,
When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
Please Any body faced this situation...
Help me to identify what error i am doing........
thanks in advance
kavitha L

Hi KChamarti,
I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
My item renderer is:
          <mx:DataGridColumn headerText="Type">
               <mx:itemRenderer>
                 <mx:Component>
                  <mx:HBox verticalGap="2">
                      <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                      <mx:Label text="{data.type}"/>
                    </mx:HBox>
                 </mx:Component>
               </mx:itemRenderer>
            </mx:DataGridColumn>
Am i mentioning the source of the image in the right way?

How do I use my web cam to record audio and video? I can get the video to work but no sound.

I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

PwmBoat,
This made me smile, because things like this do make me smile... I never make videos on YouCam, but I did this time, so I could test this one out.
You did not say what webcam software you are using...
======================================================================
Video and audio recording works on YouCam V3.5.1.4606
Make sure you have turned on a working microphone in Settings:
YouCam > Right-Side Settings >
Right-Side, Lower-Right, Select a working Microphone from the Drop down list
AND
CHECK "Capture with audio"
OK
You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too. (They have 3.x as well, but why buy what HP already gives you?)
==========================================================================
I hope this helps!
We work hard to help!
Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

CUBE Not getting All records from DSO

Hi Experts ,
We have a situation where we have to load data from a DSO to a Cube . The DSO contains only 9 records and while we r loading the data into cube , the cube is only getting 2 records . Thus 7 records are missing. Also The Cube contains more Fields than DSO. in the transformations , for the extra fields we have written end routine and those extra fields will get data by reading master data .. Any pointers how to get the missing records or what is the error ...
Sam

Why multiple threads ????

Pension payment period record issue in Retiree Payroll

Dear Experts,
We are implementing Retiree payroll with new set of wagetypes and payroll area. Now requirement is that there needs to be a provision of recording the balance period of pension payment and further it should be displayed in the form of report. That means say employee has the eligibility of receiving pension from 01.12.1998 to 14.11.2015 and he has received it till Oct, 2010, remaining balance period needs to be projected in month and days like 60.14/98.12 etc.
Now please suggest how to achieve it, should we create a custom infotype for storing it or any other way is there.
Thanks and regards
Tan

It is Indian payroll.
Requirement is to store the balance period of pension payment, like if one employee is eligible to get pension ( as per our pension benefit scheme) for 10 years 3months 15 days since his retirement date and has already received for 36 months i.e. 3years, we need to store and display that he is eligible to get pension for another 7years 3months 15 days in 87.15 format (i.e. 7*12+3= 87months and 15days) on monthly basis.
This will be also captured in a report later on.
Please suggest
Regards
Tan

RECORDING DVD FROM VCR

HOW DO I RECORD A DVD FROM A VCR? I BOUGHT A APPLE MINI-DVI TO VIDEO ADAPTER AND A S CABLE ADAPTER, IT ALL HOOKS UP, BUT IT DOESN'T SHOW UP AS BEING THERE. HELP! ANYBODY! I WOULD LIKE TO DUB MY CHILDS MOVIES OF WHEN SHE WAS YOUNG BEFORE THEY ROT AWAY ON VCR TAPE. ANY SUGGESTIONS?
imac G5 20" Mac OS X (10.4.5) just received

FYI.
I recently purchased the EyeTV 200 (Firewire).
A refurb direct from Elgato for $200.
(http://www.elgato.com/indexfr.php?file=shoponlinesh
opeyetv200refurb)
Yeah, I got the "200" because I'm transferring 300 training sessions from VHS to DVD. I use the RCA inputs (three wire plug type - white & red (sound) and yellow (video)). EyeTV200 does a fine job.
I also use our Canon GL2 to pass the video through the camera via firewire into my Intel iMac. I find EyeTV 200 easier (and I can watch and record TV!) while at work! (WaaHOO!)
This is for the analog signal. TEh EyeTV 500 is for
digital cable.
Didn't know that. Saw the "500" but thought it was for HDTV only. Thanks for the info.
Comes with EyeTV software which allows you to view a
TV guide (titantv.com) and click what you want to
record.
True! You can even schedule it to record like a VCR. I set it up to record "Amazing Race" before leaving work because the program comes on late and I wanted to see it. Got to work and there it was!
Has S-Video as well as Composite video and stereo
audio inputs.
So true. I also have a VCR with S-Video and it works just dandy with EyeTV 200.
I'm in the process of putting my videos onto DVD with
it.
Let's you save directly as MPEG 1, 2, or 4.
Also exports to DV, iPod, H.264, DIVX, HD720, HD1080.
etc.
Between this and iDVD and iMovie HD, it's some pretty
wicked stuff.
Ain't it so! Two happy EyeTV users playing on their Macs!

How can I display all records as a end user?

I am applying for jobs with the state and every week they publish a list of new positions that have just been posted on the following link: https://forms.spb.ca.gov/bulletins/weekly.cfm
and also at http://jobs.spb.ca.gov/wvpos/search_p_ejv.cfm?classcode=5393&criteria=associate%20governme ntal
It is a .cfm but only displays 15 records at a time, I was wondering if there is a tag or way to have it display all 300 something records at once? My ultimate goal is to get just the full table into a excel spreadsheet while retaining the HTML formatting so the links still work.
My thought is that the state has set it up this way to only display a set number of records at a time, the data is not private or protected, I am simply seeking a easier way to access it in aggregate.
Thank you in advance for your suggestions and help!

I think your best hope is to ask the author of the CFM whether they provide any web service that can get you that data when you call it. like.
https://forms.spb.ca.gov/webservice.cfc?method=getJobsPostings&key={key_goes_here}
There's a chance they may be regulating performance on the resultset, and don't want to return that many records at a time, pagination or not.

How to delete the double records connected to one or more than one tables in SQL 2008?

Hi
Can anyone please help me with the SQL query. I Im having a table called People with columns names: personno., lastname, firstname and so on. The personno. is having duplicate records,so all the duplicate records i have written with "double" in
the beginning of the numbers. I tried deleting these double records but they are linked to one or more than one tables. I have to find out, all the tables blocking the deleting of double person. And then create select statements which creates update statements
in order to replace the current id of double person with substitute id. (The personno. is in the form of id's in the database)
Thanks

You should not append "double" in the personno. When we append it will not be able to join or relate to other table. Keep the id as it is and use another field(STATUS) to mark as duplicate. Also we will require another field(PRIMARYID) against
those duplicate rows i.e the main or the primary personno.
SELECT * FROM OtherTable a INNER JOIN
(SELECT personno, status, primaryid FROM PEOPLE WHERE status = 'Duplicate') b
ON a.personno = b.personno
UPDATE OtherTable SET personno = b.primaryid
FROM OtherTable a INNER JOIN
(SELECT personno, status, primaryid FROM PEOPLE WHERE status = 'Duplicate') b
ON a.personno = b.personno
NOTE: Please take backup before applying the query. This is not tested.
Regards, RSingh

How to delete the record in Table

Hi Guru's,
i have Table which contain no.of Records.
i want to deleted one record. if i go to Table maint.Generator....from table itself..
how to do that... when we deleting the record. can we create new TR for that?
can anybody tell me.
Thanks in Advance,
venkat

Hi,
it is answered, here for my table there is no Table Maint.Generator.
i just explained how i have done it.
i just simply gone into Debug mode. there
code = Dele.
i have given. then i came out from debug mode to Table. there i just got Delete button on application tool bar.
i selected the record then icliked on Delete button.
it is got deleted.
But it is not asking for any new Transport Request.
Regards,
Venkat

How to delete the records in BI for deleted reocrds in R/3

Hi ,
We have a scenarion described below...
We have a table in R/3 and updates happen to the table every week with a ZPROGRAM which deletes some of the records and recreates with some logic.
Assuming :
Initially, We did the load to BI and we got 200 records for last week (Initial Load)
After R/3 prgram is ran, it deletes some of the reocrds in those table , say we only have 150.
Now, Can BW somehow know , what are those records and delete those 50 records from the request which has already been loaded ?
FYI, we just have an indicator marked with X on the R/3 table if the program in R/3 has run.
I know, one solution is "selective deletion".
As we have to selectively delete every week, we do not want to take that approach.
Second is "full load" but we do not want to do full load also as the data volume is huge.
We would like to delete those 50 reocrds in BI dynamically with some ABAP code/some logic. Does anyone have any suggestions ???
Regards,
Kumar

Hi Kumar,
I will try to explain it, but at the moment I am unable to take a look at the code.
I have set up a generic function module which will do the trick for more than one specific datasource. This function module is placed in the startroutine and only executed for the first datapackage.
Within the startroutine of the transformation, you have the possibility to use the p_r_request class. This class contains all necessary information about the current DTP load.
I use the get_source and get_target methods to determine the correct database tables dynamically. The t_h_sel (or somthing) contains the current DTP selections. This will include the RequestID and all other selections like fiscal year for example.
Because the write optimized DSO only has a technical key, we can use the RequestID to do the selection on the source table. After that you can compare the source selection with the active table of the second DSO and add all records from the second DSO that are not available in the source selection.
Please note that the key of the second DSO should be the same as the semantic key of the first DSO in order to do the compare.
Best regards and good luck!
Steven Groot

How to delete the record in the file present in the application server?

Hi,
I have two questions.
i) How can I delete a record based on some condition in the recordx in the file that is present in the application server?
ii) How can I lock the users whiel one user is accessing the file on the application server?
Thanks in advance.
Suvan

Hi,
If u want a frequent deletion this approach to delete a record from a file will havee unnecesary copy of records from one file to another and deletion of one file and renaming activities.
Instead what u can do is Add and field del_flag to ur record structure.
If u want to delete the record from a file just mark this del_flag as 'X'.
While processing u can have a loop like
loop at it_XXX where del_flag <> 'X'.
endloop.
This will logically delete the record.
When u r to finish the application at that time only perform this copying / deleting / and renaing activity
Hope this helps.
Cheers,
Nitin

How to Delete the condition record in CRM

HI,
Can you please help me how to delete the condition record from condition table in CRM.
Please explain the usage of FM CRMXIF_CONDITION_SEL_DELETE with examples.
I have also read the documention of the function module. How to use this FM for custom defined condition table.
(this is the code given in Documentation)
DATA-OBJECT_REPRESENTATION         = 'E'
DATA-SEL_OPT-CT_APPLICATION              = 'CRM'
DATA-SEL_OPT-OBJECT_TASK                    = 'D'
DATA-SEL_OPT-RANGE-FIELDNAME        = 'PRODUCT_ID'
DATA-SEL_OPT-RANGE-R_SIGN                  = 'I'    (Including)
DATA-SEL_OPT-RANGE-R_OPTION           = 'EQ'
DATA-SEL_OPT-RANGE-R_VALUE_LOW = 'PROD_1'
Thanks
Shankar

Hi Shankar,
I am using the same CRMXIF_CONDITION_SEL_DELETE function module to delete condition record present in CRM.
But it is giving me below error in the return table of the FM after i run the program. Can you please correct me if I am doing any thing wrong?
Error in lt_return: SMW3     CND_MAST_SEL_DEL_EXT_VALIDATE     CND_M_SD
code:
ls_range-fieldname = 'PRODUCT_ID''.
ls_range-R_SIGN = 'I'.
ls_range-R_OPTION = 'EQ'.
ls_range-R_VALUE_LOW = '123456'.
APPEND ls_range TO lt_range.
MOVE lt_range TO ls_entry-SEL_OPT-range.
ls_data-SEL_OPT-object_task = 'D'.
ls_data-SEL_OPT-ct_application = 'CRM'.
ls_data-object_representation = 'E'.
CALL FUNCTION 'CRMXIF_CONDITION_SEL_DELETE'
EXPORTING
    DATA          = ls_date
IMPORTING
   RETURN        = lt_return
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
IMPORTING
    return = lt_ret.
Edited by: Saravanaprasad Nadar on Jul 7, 2010 1:27 AM

Combining multiple records into a single record (View)

Okay so here is my scenerio:
There is a table I have made that details SQL jobs and the various details about them. What i wan't to do is make a view with specific logic implemented. Fields that will be taken across to this view will be: LastRunDate, LastRunTime and Step_Status.
JobName will also be used to define the logic but will not be a column in itself.
What i wan't is an additional column using this logic, called 'DataSet'. For each Dataset there are multiple jobs that are unique to it, so there are multiple records being brought over from the table to view for one particular dataset. For example,
for 'ExampleDataSet' there are three jobs, i wan't it so these jobs are combined and named as 'ExampleDataSet' under a calculated column called 'Dataset'. For the following fields i would like it so that LastRunDate and LastRunTime are the time in whichever
job was last to be intitiated is the date and time set. For Step_Status, there are three possible results, 'Running', 'Failed' or 'Succeeded'. If any of the three jobs are 'Running', then 'Running'. If neither are running yet one has failed then 'Failed'.
Only when all three have succeeded should it then be set to 'Succeeded'.
I hope i have made that clear enough, please feel free to ask any questions if not. I am relatively new to SQL but i thought to at least try least try (I knew it wouldn't work) and it didn't work. But it may give you a better idea of
what i wan't:
CREATE VIEW [dbo].[vw_DataAvailabilityAnalysts] AS
SELECT CASE
WHEN JobName in ('Job1','Job2','Job3') and step_status='Running' THEN 'Running'
WHEN JobName in ('Job1','Job2','Job3') and step_status='Failed' THEN 'Failed'
WHEN JobName in ('Job1','Job2','Job3) and step_status='Succeeded' THEN 'Succeeded'
END as StatusCheck,
CASE WHEN JobName in ('Job1','Job2','Job3') THEN 'ExampleDataSet'
END as DATASET,
LastRunDate,
lastruntime,
step_status,
FROM [CDS_Common].[dbo].[DataAvailability]
Many Thanks,
Plain_Clueless
Plain_Clueless

Okay so here is what my table looks like (Simplified). There are four columns and the data within is extracted via a Stored Procedure.
JobName
LastRunDate
LastRunTime
Step_Status
Job1
11/06/2014
09:30:00
Succeeded
Job1
10/06/2014
09:37:20
Succeeded
Job2
11/06/2014
04:05:00
Succeeded
Job1
09/06/2014
02:17:41
Succeeded
As you can see there are 3 jobs which are all 'Job1'. This jobs are obviously different within the table however this represents that they are jobs which all update the same DataSet within our local warehouse. Whereas Job2 updates a different dataset alltogether.
I wan't to create a view which will alagmate the jobs that are of the same DataSet, which will disclude the column JobName but would create a whole new column that looks like this:
DataSet
LastRunDate
LastRunTime
Step_Status
DataSet2
11/06/2014
04:05:00
Succeeded
DataSet1
11/06/2014
09:30:00
Succeeded
Bascically what this shows you is all the Job 1's combined so they are one record, Amaglamated. The last time any of these jobs were run is the LastRunDate & LastRunTime, which was the first record in the first table provided. Again for Step_Status,
there are three possible results, 'Running', 'Failed' or 'Succeeded'. If any of the three jobs are 'Running', then 'Running' (Absolute). If none of the three jobs are running yet one has failed then 'Failed'. If one has failed yet another is also running then
'Running'.Only when all three have succeeded should it then be set to 'Succeeded'. (This last bit isn't as important).
Hope this clears it up a bit,
Plain_Clueless
Plain_Clueless

Why can't I open a GarageBand recording on my iPhone in GarageBand on Mac OSX?

I recorded an acoustic performance of my vocal quart last night on an iPhone running GarageBand 2.0.1 on iOS 7.1.2. But I can't open it in GarageBand 11 (6.0.5) on Mac OSX 10.9.5. What gives?
Not only will it not open (and the software on my Mac platform is way more recent than on my iPhone, so you'd think it would be upward compatible), but when I try to open this iOS-created file on the Mac, it asks me where I want to save it ... it's already saved, I'm just trying to open it.
I've looked at the reviews for the latest GarageBand, which it tells me I need to upgrade to, and they are terrible! Many report that they wish they hadn't upgraded and that they could get back to an older version of GarageBand on their Mac.
Does this mean I'm stuck and the two GarageBand platforms are not compatible and that I won't be able to open this file? ... other thanes an mp3 in iTunes ...
Thanks for any insights you can give me.

BigMacUser wrote:
I recorded an acoustic performance of my vocal quart last night on an iPhone running GarageBand 2.0.1 on iOS 7.1.2. But I can't open it in GarageBand 11 (6.0.5) on Mac OSX 10.9.5.
[...] when I try to open this iOS-created file on the Mac, it asks me where I want to save it
it sounds like it's opening fine, but you're just not letting it finish.
it's asking you to save a version of the song for the mac; if it saved over the original file, it could no longer be opened on the iOS device, if you needed to alter something later

Validating records into a maintenance view

Hi folks!
I have a simple Z table (say ZTABLE) and a Z view based on it with some related description (say ZVIEW). The ZTABLE has a DEC field (called COEF) with 2 decimals and it should have only numbers between 0 and 1.
I set the valid interval from 0 to 1 but, as help says, it's only checked for CHAR, NUMC, DEC, INT1, INT2 and INT4 data types. Not for DEC.
Then I use an event on ZVIEW. On SE11 I went to "Table maintenance generator" - Environment - Modification - Events. So there I put the 05 event (Creating a new entry) and I programed the check. It works fine for new entries, but if you have a record on table and you want to change the COEF field you can put there any number, even outside the 0-1 range.
I tried with the 01 event (Before saving the data in the database) but it seams to be called only for last record.
Could anybody tell me what can I do?
Thanks!

Hi,
Since it is a Z TABLE..
You can directly modify the flow logic in SE51.
Go to SE51
Give the program name - SAPL + Function group name
Screen number
Press change..
In the flow logic..
Add a module after the FIELD ztable-number, in the PAI event..
Ex..
FIELD ZTABLE-NUMBER MODULE NUMBER_CHECK.
And in the module validate the number..
MODULE NUMBER_CHECK INPUT.
IF ZTABLE-NUMBER <> '0' OR
ZTABLE-NUMBER <> '1'.
MESSAGE E208(00) WITH 'Not a valid number'.
ENDIF.
ENDMODULE.
Thanks,
Naren

Recording

Similar Messages

Maybe you are looking for