Records missing at DTP execution.

Hi experts,
We have a DTP that should load 30420 records from PSA to DSO.
But only 6069 are ariving.
We found out that high numbers were missing (like only the first 6069 records are loaded), so we made a new PSA with only the high numbers.
This resulted in a PSA with about 12000 records. Only 5700 were loaded in the DSO.
But these 5700 are new records. So it is not a filter problem.
Then We changed the package size from 50.000 to 5.000.
When we look at the DTP monitor we find that about 20% of each package of 5000 records is loaded to DSO.
It happens in the step:
RSDS ZHE_NL_TRANSCRIPT CSPCLNT010 -> ODSO ZHE_EXTT : 5000 -> 996 Data Records
Did anybody of you had a similar problem?
How can we investigate this further?
Any help will be appreciated.
Udo

Hi Paula,
We checked the keys with RSA3, these are all different.
But we just checked the keys in the PSA, and there we find duplicate keys. (sorry, should have done that before)
So the problem is probably a buffer/storage problem in the ECC-system?
The RSA3 outcome is different from the PSA. Do you know what that can be?
(it is a custom extractor, but the programmer is not available now)
Udo

Similar Messages

  • ABAP programming Error in DTP execution

    Hi
    When execute DTP on InfoCube it generate following error after approx 10 to 15 minutes:
    ABAP programming Error in DTP execution
    Screen Shot also attached.
    In PSA is shows all records OK (30 records)
    What is the solutions?

    Hi Imran,
    Good to knew you got resolution for this issue.
    If you are getting output from above replies mark the correct or helpful answers. So that it will be helpful if some one faces the same issue again. http://scn.sap.com/docs/DOC-46006. You marked your answer as correct now.

  • New iPod touch. Error message when trying to sync to iTunes first time: "Pairing record missing. Can't sync." Nothing in Support addresses this. Help!

    I havev a new iPod touch 4th gen. When trying to sync to iTunes first time, I got this error msg: "Pairing record missing. Can't sync." Nothing in Support addresses this. Help!

    See if the previous discussions with the same error will help you. Some of those are listed on the right side of this page under the heading "More Like This".

  • Material control record missing in company code while doing migo OMSY maintained

    Hi All,
              for a new company code when i try to do GR using Migo getting error "Material control record missing in company code" i have maintained the OMSY periods for company.i see other answers for same question suggesting maintain OMSY recored for company code.i am getting the error even entry exist ,any help greatly appriciated,
    Thanks,

    Check in OMS2  whether you maintained the quantity and value update settings for your plant

  • NO DTP EXECUTION FOR 0ASSET_CLAS

    Hi gurus,
    I am executing the DTP for 0ASSET_CLAS infoobject to load text master data ,but it is giving error :
    <b>"Messages for data records saved; request is red acc. to configuration"</b>
    and the error message text is :
    <b>0ASSET_CLAS : Data record 6 ('00001100D ') : Duplicate data record</b>
    The data is loaded properly in the PSA and without any errors.
    regards,
    man

    Hi,
       This is because of Duplicate Records. I want you to change the DTP to handle Duplicate Records.
    Open DTP in Change Mode, in the Update Tab Page, select the Check box "<u>Handle Duplicate Record Keys</u>". That will take of your issue. Activate the DTP.
    Try loading again using DTP. You won't get this issue.
    Look into this thread for clarity : <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/content.htm</a>
    all the best.
    Nagesh Ganisetti.
    *Assign Points if helps.
    Message was edited by:
            Nagesh Ganisetti

  • Record missed in a SQL

    hi experts
    I run a SQL like :
        SELECT UC_POD_EXT
               UC_DATEFRO
               UC_DATETO
               /BIC/ZKWH_MR
               /BIC/ZKWH_BILL
               /BIC/ZBI_MRCON
          FROM /BIC/AZFC_D9900 INTO TABLE LT_BILL
          FOR ALL ENTRIES IN SOURCE_PACKAGE
         WHERE UC_POD_EXT = SOURCE_PACKAGE-UC_POD_EXT.
    SOURCE_PACKAGE only has 1 record, and this reocrd's UC_POD_EXT is 10032789420750421. and it return 31 records.
    and I test another SQL like
        SELECT UC_POD_EXT
               UC_DATEFRO
               UC_DATETO
               /BIC/ZKWH_MR
               /BIC/ZKWH_BILL
               /BIC/ZBI_MRCON
          FROM /BIC/AZFC_D9900 INTO
          corresponding fields of TABLE LT_BILL
         WHERE UC_POD_EXT = '10032789420750421'.
    it return 34 reocrds
    so some records missed in the first SQL, i don't know why.

    Please retrive all the key fields of table /BIC/AZFC_D9900, as this is because of FOR ALL ENTRIES CLAUSE (as mentioned by Neil), which will delete duplicate records from the fields you are selecting.  Since now you'll retrieve all the key fields of the table /BIC/AZFC_D9900, you are assured of getting unique records.
    Regards
    Ranganath

  • IPhone Restore + Pairing record missing.. HELP!!!

    I restored my iPhone 4S and when it restarted, I got an error message stating "iTunes could not connect "iphone" because pairing record is missing"... I have restarted my computer numerous times and reinstalled my itunes twice. My iphone is now blank and won't connect... PLEASE HELP

    I had the same problem (pairing record missing) and was finally able to fix it. My host computer is a Windows 7 64-bit setup. I kept reading where others solved the problem by eliminating the Lockdown folder, but I couldn't find that folder in Windows. But it was there in the following location:  C:\ProgramData\Apple\Lockdown. After closing iTunes, I simply renamed the Lockdown folder to Lockdown.old and restarted iTunes. I then plugged in my iPhone USB connection and it worked. (Changing the folder name required Administrator privilige.)

  • When connecting my iPad a message pops " Pairing record missing"

    When connecting my iPad to my Itune libarry a messages pops "Pairing record missing" how do I solve this error?

    You cannot lose your current projects or events by reinstalling.
    Still, a good rule of thumb is, "If it is important, back it up."

  • Is timed recording missing from CS5.5?

    Is timed recording missing from AA CS5.5?  I use this feature frequently.  If it's called something else now, I'd like to know what.  If it's not in CS5.5, then I fill out a feature request.
    J. D.

    I'm pretty certain I remember reading on the list of features not included that this is one of those!
    Jeff

  • How do I correct this error pairing record missing for iPad in iTunes?

    How do I correct the error pairing record missing in iTunes for my iPad?

    Quit iTunes, restart your computer, restart the iPad and then try again. Try another USB port as well.

  • HT1296 pairing record missing?

    I could not synch my podcast today because I have a pairing record missing.   How do I find a pairing record and replace it?

    I've got this message after upgrading PC to Windows * and reinstalling iTunes. Looked at other similar posts here and simply undocked my iPad (3) and re-docked it and it all worked OK. iTunes went through a 'you need to authorise this PC' routine but then said it's already authorised and then continued to re-sync my iPad OK.

  • Record missing while insertion

    Hi,
    Through my jsp coding i am checking nearly 15 conditions in loop. Each and every loop execution will insert a record on any of the 15 condition, this is going smooth but sometimes it is missing some records to insert. what and why its happening.
    I am using Ms-Sql server 2000. i am using Stored procedure to insert the record.
    Please advice to make this to work efficiently.

    Yes, I have all the 15 conditions belongs to a single transaction and all these conditions will be in a jsp file.

  • Records missing in data load.

    Hi All,
    we have one load(DSO-->CUBE).
    EX: In DSO for customer number 1 there are 20 entries.
          after uploading the data into Cube for this customer only 2 or 3 records loading into cube.
    after applying the delete source package conditions at transformation of DSO-->CUBE also it should load 10 entries.
    but only 2 or 3 records updating.
    But when i debug the DTP Load, after END Routine it is showing the currect number of records., means it is showing 10 records for that customer..
    but it cube only 3 records appearing..
    What might be the reason..?
    after end routine is there any chance to drop the records?
    please share your ideas..
    Thanks
    Krishna.

    Hi Asish,
    The key fig values summation also not matching.
    i tried for that one customer also.
    but it is behaving same(means in debuginng it is showing currect no.of records but not in CUBE)
    and there are no filter conditions used in DTP.
    Thanks
    Krishna
    Edited by: krishnamurthy g on Oct 17, 2008 6:52 PM
    Edited by: krishnamurthy g on Oct 20, 2008 8:30 PM

  • Brand new iPod touch, only synced once. Now showing the pairing record missing notification. Not recognised by iTunes OR computer. Have tried literally everything including reinstalling iTunes, rebooting, etc. Please help.

    As I've said, brand new iPod touch. I only synced it Friday night, put some music on it. This morning tried to connect to iTunes and got a message saying the pairing record was missing? Computer isn't recognising it either, but it charges off the computer just fine. Have tried everything including changing USB port, rebooting, uninstalling and reinstalling iTunes twice, literally everything I've found on forums. Anyone help me out here? I'm so annoyed I could nearly cry.

    Anyone able to help with this?

  • Record Missing in COEP Table

    Hi Experts,
    I tried to display report Internal Order Actual Line Item (KOB1), but when i execute, it said " There is no actual line item".
    Actually i have posted several line item for this Internal Order and I checked the FBL3n, I can see some posted line item to this Internal Order. I also checked from COEP table, the record is also missing there.
    FYI, this issue happened today, and yesterday I can see actual line item in this report and COEP table.
    Please kindly advise
    Thank you

    Btw i can found the CO document in COBK table. Very strange..

Maybe you are looking for