Records not visible in FAGLL03

I am trying to generate G/L report through FAGLL03 but its not working for a certain company code. For other company codes, it is working fine. Is there any mapping that is missing? Please help

Hi SD,
Please check your GL account master data, whether the line item display check box selected or not?
Regards,
Mukthar

Similar Messages

Records not visible in application if loaded into database

Hi all, please can guide me to an incident ..
in my company we have two massive load custom programs .. is that in both cases it is possible to make massive loads .. but are not visible in the application ... this is human resources R12.1.1
Thanks

And what is your question or issue?
If the question is related to R12 and human resources you should mark this thread ANSWERED and create a thread in the E-Business Suite - HRMS forum.
https://forums.oracle.com/thread/2492902

Records not visible in SE16N are shown in SELECT

Hi, I have a select statement, without any restrictions/conditions on the table ERDK.This fetches some records.
But when I try to get the same records through SE16n or SE11, it says no data found. Any idea why. Because I dont want the records to show in the select statement. These records mess up the calculations.

Hi Suhas, Below is the select statement i use
SELECT opbel
           stokz
           intopbel
           vkont
           abrvorg
           FROM erdk
           INTO CORRESPONDING FIELDS OF TABLE i_erdk
           FOR ALL ENTRIES IN i_ever
           WHERE vkont = i_ever-vkonto
             AND loevm = ' '
             AND stokz = ' '
             AND ergrd NE '03'
             AND simulated = ' '.
My question is, this statement fetched a line with opbel = '61007232'.
When I try to get the line in SE16N/SE11, it says 'No values found'. I would like to know, why the line is not showing in SE16N but shows in the select statement.
Dhiraj, while running SE16N, i mention only the opbel field [61007232] for selection criteria.
In case you need further information on my queries, please do let know.

Reporting Flag is not visible in the manage screen

Hi BI Experts, Good morning.
We load the inventory data daily in the night time which is delta load.
5 days back, we got 0 records and the request is in red.Then i rerun the infopackage manually and got the total records in to the cube.
From that day onwards its running successfully.
Yesterday i deleted the bad request from infocube.
But the Reporting flag is not visible.
Today i didnot get the records.
Please can anyone tell me the process.
Thanks in advance.
Regards
Anjali

Hi Nagesh,
Still i am not getting reporting flag.
I tried what did u say.
And today i did not get the records. Infopackages didnot run. It shows in red.
I tried to run it manually but it gives error.
The error message is:
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program 'SAPLRRMS' has to be
    terminated.
Please give me the reply.
Thanks in advance
Regards
Anjali

Currency Conversion type not visible in the query

Hi ,
I created one currency type conversion   Z_INR
exchange rate type : M
Exchange rate from infoobject : zexch_rate(key fig)
source curr from data record
Fixed target curr : INR
Variable time reference : A to Exact Day
Special info object : Ztr_date (Transaction date)
it got saved succesfully but wen i try to include this in the query its not visible there . can anyone let me know why this problem is coming
help will be appreciated .
i also included rate and date in the query still not visible

Hi,
Create Currency conversion type using Trans: RRC1.
1.Specify your Exchange rate type.
2.Dynamic Exchange rate type
3.Source curency from data rec.
4.Fixed currency say USD.
5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
Secondly In the key figure field to be converted in the query,   select properties - select the currency conversion key name .
Thanks,
Nagesh
Sony Singapore

Project Commitment Cost not visible for Purchase Orders with Item Categry Q

Hello All
I have a problem. My project commitment cost is not visible for PO's with Item Category Q. I assume that as the stock can be issued against any WBS elements I might not be able to see the cost against a single WBS element. But the cost should get recorded against the project right? If so where can I see it?
Request your help with this problem
Regards
Renjith

Hello
Could you please explain how to maintain that?
Best Regards
Renjith

Execution Plan Run is not visible in Current Run tab

Hi,
I have created the EP and I have build the EP successfully. After that I am clicking on the Run tab. It says the task has been submitted succesfully to the DAC server.
But, when I am seeing the status in the Current Run tab and also in the Informatica Monitor, My EP run was not visible. There is no record created for this run in the Current Run tab.
Anyone has faced this kind of issue earlier. Please advice me how to resolve this issue.
Regards,
Saleem

Saleem its strange. I did not came across this any time. Is it happening for all the Execution Plan's. By restarting the DAC server is it working. Sometimes we may face these kind of problems with DAC and with restart most of them will be resolved. If it gives problem always then there is somthg wrong i believe.

UWL - Records not getting into LeaveRequestApproval web dynpro screen

Hi,
We are on EP7 sp9 and ECC 6.0. We are working with UWL. In UWL, we downloaded the standard XML file and done changes for removing the other tabs except the 'Tasks' tab and also placed the refresh button on main screen. It looks fine. Now, the problem is the web dynpro screen is not pulling data from backend. Previously, when we click on 'LeaveRequestApproval' work item, we use to get ITS screen. at backend we did changes in SWFVISU transaction to get web dynpro popup screen when user clicks on 'LeaveRequestApproval' work item. We could able to get the popup web dynpro screen, but it is not pulling any records from backend.
Now, let us know where we are doing mistake? do we need any more configuration at backend? If so, let us know the work around for it.
Thanks in advance.
Kind regards,
Raj.

Hi,
But are you able to see the labels, buttons etc ? Or is it that the entire page itself is not visible ?
Please check the log file and see what is the error you get there ? Or probably check on the backend side if there is a dump.
You can also check with the debugger on the backend side...see what exactly happens on the backend when the page is getting loaded.
Cheers,
Sunil
PS: Reward points for helpful answers.

Navigational attribute data not visible in BEx Report

Hello All,
I am facing following problem in one of my BEx reports:
I am fetching data from an ODS. With other columns of ODS, I have also to show few navigational attributes( which are master data of some info-object) . In report the corresponding data in navigational attributes is not visible for few records, although when I see the master data of this Info-object (whose navigational attributes I have to include), in Adm. Wrkbench the data is visible. I wonder what step is missing.
Many Thanks for helping me out.
Best Regards,
Sumita

Hi Roberto,
While trying to activate the Infoobject's master data (by right-click) I get the following message,
"Lock NOT set for: Loading master data attributes"
And the data is not activated.
Can you please suggest what needs to be done.
Thanks & Regards,
Sumita

(Harmful) edit not visible in WkiHistory in "Feature Requests"

Maybe this should be a discussion.
I've just removed a porn link from the Forums table in "Feature Requests for..."
The disturbing part is that the edit I removed first appeared in Rev.233, but was not visible in the WikiHistory. I can construct a lot of scenarios here (but I won't!) and all of them are scary. I cannot construct a scenario with a "harmless"
rating.
I'm only a newbie, it's not for me to take this further. But I am sufficiently experienced to know that a revision of best practise access control should be undertaken. Yesterday would be a good time to initiate it.
Gordon.

Hi Richard -
Thanks for answering. It's the comment to the edit that's missing.
I believe (I have not tested) that blank comments are not listed as part of the edit, so all we get is the user's edit listing, but no clue of what was done in the edit.
I draw your attention to Wikipedia, where all parts of the edit are summarized in the History List. I don't believe the Technet Wiki History needs that amount of data, but OTOH that is the sort of thing computers excel at. But I do believe Technet
Wiki should record blank comments as well as filled comments. Maybe a blank comment could be filled with the first 10 or 20 words of the edit?
Gordon.
Okay, please add the feature request to the Wiki section:
http://social.technet.microsoft.com/wiki/contents/articles/4703.feature-requests-for-technet-and-msdn-profiles-and-social-platform-tools.aspx#TechNet_Wiki
Hey, thanks for your edits here:
http://social.technet.microsoft.com/wiki/contents/articles/4703.feature-requests-for-technet-and-msdn-profiles-and-social-platform-tools/compare.aspx?revB=0&revA=234
You removed a dead link and a spam link!
And the history tab showed me all that!
We're actually thinking of migrating to the Wikimedia platform. Then that would give us your feature request. But it's best to capture it on our list so we don't lose sight of it.
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Goods are not visible on the Web Shop main page (RUMP UP)

Hi colleagues.
Help please anybody :)
There was the problem with the goods in Web Shop.
Goods are not visible on the page Web Shop.
Below you can see actions performed by us and Prerequisites:
1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
3. Manually created root node in Product Catalogs table in MDM
4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
5. Fill another necessary fields in Product Catalog module in WCEM.
6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
Best regardn,
Andrey

Hi Denis
Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
But on the WebChannel web shop page this products are not visible.
I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
But this role does not exist in the system (SAP MDM, SAP NW).
Please give me advice about this.

Some images are not visible

Hi,
I have a recordset which has 79 records with images. Report not showing last 9 images (sometime 10 images). Even I changed to display records in descending order then last 10 are visible as these images are at start, now i am unable to see
again last 9 images, which were visible when these were at start.

Hi Mahendra,
According to your description that you always go the last ten record not display in the report, right?
I have tested on my local environment and can't reproduce the issue, please try to answer and check the information according to the question below to help us better analysis about the issue:
Please Execute the query in the query designer to see if you can get all the 79 records.
How many columns in the reports? Did the field of the image comes from Database - select a row that contains the image from a database table?
So, you got the entire 10 rows with multiple columns not shown in the report,right?
As
yosedesh mentioned that please make sure you have checked all the pages and you can also export the report to HTML or MHTML to see if you can see all the record display.
I recommend you to recreate the tablix or redesign an new report the same as this to see if you still have the same issue.
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Printers are not visible in Print management

Installed print server feature in Windows server 2012 .We have added few printers in server, but these printers are not visible in printers section of Print management console.Even the default Microsoft XPS writer is not showing up.
Restarted Spooler service and reinstalled print management console.Server DNS record looks good too.
Able to view the printers in "Device and printers" .They are not visible only in print management console.
Thanks

Hi Daemon_Joker,
Please check if some necessary updates need to be installed. Please run
sfc /scannow command to scan all protected system files.
Meanwhile, please use
Get-Printer PowerShell cmdlet retrieves a list of printers installed on the computer. Did all printers display correctly?
In addition, please open Print Management, click Printer Servers, expand
your printer server, then right click Printers and select “Add Printer…”. Please check if you will be able to find printers via this wizard.
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Custom subtype not visible in ESS benefits

Hi Experts,
in erp2005, i created a custom subtype 9B for IT0021 (family members). defined a use case to maintain records through ESS personal information workset. so, a new button with name beneficiaries is seen on portal. however, these beneficiaries are not visible when employee wants to add them in the benefits plans as a beneficiary in certain plans. in the backend system, they are visible however. they can be added to a plan.
thanks for reading, i appreciate your help.

Kumarpal,
did you check this thread
https://forums.sdn.sap.com/click.jspa?searchID=17218337&messageID=6299502
Thanks
Bala Duvvuri

SAP RM: How can I create a Node when the node is not visible for the user

Hi,
Product: SAP records Management for Public Sector
Version: 7.00
is it possible to create a instance node when the model not is not visible for the active user?
I looked in the CL_SRM_XML_REC_MODEL but every methode I used gave me no results with the special user.
Regards and thanks for every beginning
Fanninger Thomas

Hi,
here an example.
When I use the method CL_SRM_XML_REC_INSTANCE->IF_SRM_XML_POID~GET_ALL( POID_TAB COUNT_USER_REST COUNT_POID_AUTH ).
When I used the user with no right for viewing the invisible nodes I get no elements in the tabelle POID_TAB and 38 in the value COUNT_USER_REST.
So did any one know a solution you can I create a nodes and change the restriction for the new node with the normal user?
Regards
Fanninger Thomas
Edited by: Thomas Fanninger on Feb 5, 2008 8:15 AM

Records not visible in FAGLL03

Similar Messages

Maybe you are looking for