Recordset error DW CS4 (URGENT)
When I press the + sign then Recordset in the Server Behaviors Panel I get this error: (actually anywhere in DW I try to create or modify a Recordset I get this error).
http://img193.imageshack.us/img193/2941/errorbfs.jpg
Help Please! How do I fix this?
FOUND 2 SOLUTIONS:
1. First one deleting the Dreamweaver cache file. That didn't work!
2. Second was renaming the entire Dreamweaver configuration file so that Dreamweaver can create another one (or so I've read). Now it works but my extensions are obviously gone! (I suspected one of the 2 extensions I installed yesterday have smth to do with this error, but the extensions worked great can't really complain about them)
So I HAVE OTHER QUESTIONS NOW:
It is ok to leave it like that with the new configuration file? Will Dreamweaver work with its full features?
Hi David. Thank you for your reply to the problem that the original poster and I are having with Dreamweaver CS4. Unfortunately deleting the File Cache did not repair the problem. I am currenty running Windows 7 Retail and have even changed the Compatibility Mode for Dreamweaver to that of Windows Vista SP2. I have also tested with no extra extensions installed and still get the problem. I have used CS4 for over a year and have never seen this problem until I loaded Windows 7.
The original poster was using a Mac from the screenshot and was getting the same problem. I know that Dreamweaver uses javascript. Do you think that this could be part of the problem? The program seems to be working file, but you get this error message everytime you use any server behavior. It's odd. I will look for updates for the application. Any suggestions you may have would be appreciated. Thank you for your time.
Leo McKenzie
Similar Messages
-
Will installing a CS5 trial fix the version cue errors from CS4?
Hi, I was wondering if installing a trial version of CS5 would fix the version cue errors from CS4.
If not, does anyone know a good download of the version cue files? They have all dissappeared from my computer after running the cleanup script and the problem still persists =(Afterr months of pain and one ephiphany later, i have a simple solution to the issue.
Go into the common files, adobe drive, version cue folder, and drag the files into the recycling bin =)
So theres no need to install cs5 =D
Hope this can help others who still have this issue. -
"An unidentified error has occurred" when testing a recordset, asp, vbscript, cs4, with dsn or custm
Hi,
I have created a dsn and a connection string that test fine on my web host (crystaltech), but I get an unidentified error when I test them on DW CS4. Any thoughts?
This is my connection string:
"Provider=Microsoft.Jet.OLEDB.4.0; Data Source=D:\inetpub\bnicrossroadsconnections\dbs\members.mdb;"
which generates this code:
<%
' FileName="Connection_ado_conn_string.htm"
' Type="ADO"
' DesigntimeType="ADO"
' HTTP="true"
' Catalog=""
' Schema=""
Dim MM_testConn_STRING
MM_testConn_STRING = "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=D:\inetpub\bnicrossroadsconnections\dbs\members.mdb;"
%>
The connection include code is here: http://bnicrossroadsconnections.com/connections/testconn.asp
My dsn code is:
<%
' FileName="Connection_odbc_conn_dsn.htm"
' Type="ADO"
' DesigntimeType="ADO"
' HTTP="true"
' Catalog=""
' Schema=""
Dim MM_memberconn_STRING
MM_memberconn_STRING = "dsn=memberdsn;uid=bnixroads;pwd=pass;"
%>
The dsn include code is here: http://bnicrossroadsconnections.com/connections/memberconn.asp
What am I doing wrong?
This is on a Windows server and I have set the file permissions to the dbs folder to allow writes and deletes.
I tried moving a db and dsn from another site, where they work, and I get the same unidentified error on this site. I'm thinking I may have missed something with the host, but don't know what. Crystaltech says everything looks fine at their end, and IE throws no error messages.
Many thanks!!!Thank you. I closed all firewalls and tried it but got the same error. Then I tried rebooting and restarting DW to no avail. So, I started clicking on the commands and on the site>advanced there is a Remove Connection Script command. I clicked that and retried creating the dynamic table and much to my surprise it worked. I think perhaps that it was a combination of your suggestion and getting rid of the old script that left it work. Thanks again for your help.
Best regards,
Clair -
Could not complete your request because of a program error photoshop cs4
My first frustration right now is that I can't search the forums... anyone got an answer to that? on the right hand side (if I'm logged in) I type in a search for anything and it always shows no search results found! Why? is the search function not working?
Anyway, my problem is that when I try to save a multi-layered psd file into psd or jpg I get this error message: "Could not complete your request because of a program error."
What is causing it?
I checked for updates and PS is up-to-date. I restarted, and it worked great for about 3 saves (different pictures). (I'm basically running through some shots and just doing a quick levels and curves adjustment and running an action putting in my name watermark.)
After that quick edit and trying to save - same error message again.
It started suddenly yesterday - after having used PS for about 1.5 years without a problem. I haven't done any changes to it as far as I'm aware.
Any one seen this before, or have a solution to this?
Thanks!
Computer specs:
Windows 7 Pro - 64-bit
12 GB Ram
750 GB OS hdd where PS is installed
2 TB Media drive where the files are being pulled up from/saved to.
Intel i7 x980 3.33 GHz
GeForce GTX 470 with 1280 MB dedicated memory
Logged in as administrator.Did you update or change or plug-in or remove anything else on your computer just before it happened? Photoshop relies on other system libraries to do things and maybe one of those changed.
No, I did not change anything; I was editing pictures - from a quadding trip where they asked me to shoot for them - and suddenly I started getting the message on most pictures.
Hard drives are not nearly full. (.99 TB free on media drive and 588 GB free on OS {C} Drive)
scandisk error check? I probably need that.. (I've had some problems with BSOD and had the BIOS corrupted recently that I had to flash the BIOS again. Could that cause something like this?)
How do you reset preferences? Is it the Ctrl + Shift + Alt key immediately after PS starts? I did that and it didn't fix it.
Saving in odd location? No, I don't think so; I save to the same place I save other stuff and I have a solid directory base and I always follow the same procedures. I save back into the same folder I open the file from and save back to the same filename + "edit". That way I can compare side by side and have a backup copy of the file.
The only USB device plugged into the computer is a logitech wireless combo of keyboard and mouse. (And a wired USB keyboard that sits to the side and that I use only when the batteries in my wireless dies.
I can't think of anything that has changed that would cause PS to act like this.
If I can't get it working soon, I'll re-install. I have the Production Premium CS4 version - can I just reinstall PS or would I have to do the whole suite?
Thanks!
PS. I don't know if I was clear enough on what I'm doing: I open anywhere from 1 - 20 pictures at once, and then do a quick level or curve adjustment and save to a different file name. The confusing thing is - some pictures I have no problem with, but others - even though I do exactly the same thing - this error message comes up. I'd say about half of my 107 pictures from the quadding trip refused to save.
It almost makes it seem like some pictures are corrupt or something - and yet, I'd be really surprised to have soo many corrupted images suddenly. -
Set up error on CS4 Master Collection
I bought and have been running the CS4 Master Collection with no problems for months.
Then suddenly, I got a glitch in my photoshop CS4 and could not repair it. I decided to uninstall the whole CS4 suite only to find that it did not uninstall properly. In the uninstall panel, the suite set up icon remained, even though it showed no more programs in terms of space taken up.
I then tried reinstalling the suite, but got this message:
Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance.
Note this is NOT Internal Error 2739. At least not that I know of.
I have since been on various forums and help sites and tried all kinds of ways to get around this - downloading Java Runtime, doing a regsvr32 jscript.dll command in cd ..\SysWow64 through an elevated command prompt as admin. I have deleted all traces of Adobe programs in my Common files folders and anywhere I could find them, but nothing has worked. http://www.mydigitallife.info/2007/02/17/how-to-open-elevated-command-prompt-with-administ rator-privileges-in-windows-vista/
I know many others have had this issue, but none of their solutions seem to have worked for me. If anyone has any advice on how I can reinstall my legal and legitimate CS4 Suite, please let me know. I have Vista 64bit Business edition running on a Dell Precision T3400.
ThanksI have also run CS4Installer Database Utility, CC
cleaner and done a full registry clean -
Hi new poster here. Quick history of the issues I'm having. I was running CF 8 64bit with Vista and had the MS Access driver issue. SO I downloaded CF 9 32 bit version and can now define my datasource for an Access database. No problems there now so that's good. Now when I go and define a recordset for a select query, I add several records to the Select statement and for some reason a particular record I add, CF always puts this record name in parenthesis. i.e. "Size" My database did not have the parenthesis included, but CF adds them just on this record name. With CF 8 it didn't seem to be a problem, but now with version 9 it throws up an error message: adojni.ComException: invalid use of '.','!', or '()'. in a query expression tblSwimwear."Size" in Microsoft JET database engine code 3092
I know this is a lot to digest, but I'm very confused as to what's going on here. Again CF 8 had no problem with the " " around Size. I can even go and remove the parenthesis around Size before I test the select query, and still get the error. If I leave out the Size record, I get no errors.
I will add this so I make sure ';m covering all the bases, but when I defined my datasource, I had to use Microsoft Access Unicode as my driver. Don't know if that would make a difference, but still letting anyone who may can help know. Thanks in advance!teedoffnewbie wrote:
I am using Dreamweaver cs3 to build CFM templates
. I use the recordset wizard to build my query.
Again when I did the same thing using CF 8, CF 8 also "put" the quotation marks around the word Size(my DB record name) as well, but it was never a problem. In CF 8 I could either leave the quotes around the word, or if I wanted to, take them out. Either way worked with CF 8. CF 9 however doesn't let me do either one. It automatically, for some reason puts " " around Size and gives the error. When I remove the quote marks I still get the same error.
Again sorry if I am not clear enough, I just started learning CF about 2 months ago.
In response to the next poster, I cannot post my code since it wont let me finish defining the query.
Using dreamweaver and using the developer edition of the CF server running locally on my machine. also can upload the cf templates to my schools web server running CF as well.
OK, so first advice is if you're trying to learn CF: stop using all the wizards and what not, and code your templates by hand. You will never get anywhere if you rely on the code that DW generates, and if it's anything like it used to be last time I used it, the code it generates is rubbish anyhow, so it's a very poor CF tutor.
Secondly, if you say you can't post your code because it "won't let you finish defining the query" (in the DW query wizard, yes?) then that's a DW problem, not a CF problem. Anyhow, there's nothing to stop you NOT using that wizard and just coding the SQL by hand (which you should be doing if you're a learner anyhow, IMO).
Adam -
Report Error whiloe opening(Urgent)
Hi All,
Users are facing different kind of error while running the report in Webanalysis 9.3.1
Error:- 1003 Native : 502 Invalid Object Path Specified
App/Appname/cube/cubename/Dim/Time
but when the same reports are runned with admin ID it was opening fine with out any errors.
I'm tried to many ways to solve this issue but not able to find any solution can any one tell me why this error is comming.
Its really urgent for me
Sri......Hi,
thx for your replay,, yes i too noticed tht it was security/filter isuee in Database(Essbase)
if a user is assigned as Database Access in Essbaseand attached a filter to tht user we are facing this kind of error......
and when user is assigned Application Manager in Essbase this error is not comming..... but if we give Application Manger in Essbase we can't attach filter to tht user this is the issuee......
can you suggest me the better way to solve this.... users should a filter and this eror should not come....
Thx.
Sri...... -
BW error. Need urgent Help( I will give out full points).
We have BW version 3.1 and content 3.3.
We are doing loads to ODS and getting oracle partition error. It gives Oracle partition error ORA-14400. inserted partition key doesn't map to any parititon.
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
(FORM)", or declared in the procedure's RAISING clause.
o prevent the exception, note the following:
atabase error text........: "ORA-14400: inserted partition key does not map to
any partition"
nternal call code.........: "[RSQL/INSR//BIC/B0000401000 ]"
lease check the entries in the system log (Transaction SM21).
ou may able to find an interim solution to the problem
n the SAP note system. If you have access to the note system yourself,
se the following search criteria:
The termination occurred in the ABAP program "GP3WRFMGVS1D8IW16LLGSL4QQKH " in
"INSERT_ODS".
he main program was "SAPMSSY1 ".
he termination occurred in line 41 of the source code of the (Include)
program "GP3WRFMGVS1D8IW16LLGSL4QQKH "
f the source code of program "GP3WRFMGVS1D8IW16LLGSL4QQKH " (when calling the
editor 410).
rocessing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
rocedure "INSERT_ODS" "(FORM)" but was not handled locally, not declared in
the
AISING clause of the procedure.
he procedure is in the program "GP3WRFMGVS1D8IW16LLGSL4QQKH ". Its source code
starts in line 21
f the (Include) program "GP3WRFMGVS1D8IW16LLGSL4QQKH ".
Please help me guys. I will award points for good answers.Dear Sir,
Now I have got the problem like yours (load to ODS and ORACLE partition error ORA-14400 with INSERT_ODS). Tell me, please - did you solve this problem?
Can you recommend me something? What did you do with partitions?
Help me, please - I need urgent help too.
GLEB ([email protected])
P.S. Sorry for my English, I havent got any language practice for a long time. -
Installation error - photoshop CS4 on windows vista 64 bit
Hi guys
after doing all the ideas in my previous post , I'm now with this error messege while installing the trial version of Adobe photoshop CS4
then after finishing the installation I've tried to start the software so I've get another msg
please tell me what to doDidn't you read the posts in your other thread? Several people told you what needed to be done.
-
Hi All,Issue regarding bdc for capturing error records,its urgent
Hi All,
My requirement is to capture the error record and download the error record to a flat file .
I have done recording for MM01 transaction .
I am getting a problem like no error records are downloaded into the flat file .It is downloading only the empty records.
Pls see the below code which i developed & modify it for any changes .Its an urgent .Pls provide me the solution ASAP.
My Flat file
M FERT X MATL105 KG
X FERT X MATL106 KG
In the above flat file 'X' is an Industry sector which doesnot exists which is an error record that has to be captured and download it into the flat file .
Source code :
report Z_MM01_MSG_F MESSAGE-ID MSG1
no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case.
DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
'* data element: ' followed with the data element
which describes the field.
If you don't have a data element use the
comment without a data element name
3.) The second line shows the fieldname of the
structure, the fieldname must consist of
a fieldname and optional the character '_' and
three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record occurs 0,
data element: MBRSH
MBRSH_001(001),
data element: MTART
MTART_002(004),
data element: XFELD
KZSEL_01_003(001),
data element: MAKTX
MAKTX_004(040),
data element: MEINS
MEINS_005(003),
data element: MTPOS_MARA
MTPOS_MARA_006(004),
end of record.
*DECLARATION OF BDCDATA STRUCTURE
DATA: IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE .
*declaration to store the message
DATA: IT_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE .
*DECLARATION TO STORE THE MESSAGE
DATA: BEGIN OF IT_STORE_MSG OCCURS 0,
STORE(1000),
END OF IT_STORE_MSG.
*declaration SUCCESS MESG
DATA: BEGIN OF IT_SUCCESS OCCURS 0,
SUCCESS_REC(10),
MBRSH(10),
TABIX LIKE SY-TABIX,
END OF IT_SUCCESS.
*declaration ERROR MESSAGE
DATA: BEGIN OF IT_ERROR OCCURS 0,
ERROR_REC(10),
MBRSH(10),
TABIX LIKE SY-TABIX,
END OF IT_ERROR.
DATA:TABIX LIKE SY-TABIX.
*validating Material type(mtart) field data with table T134
data : v_type like T134-mtart.
DATA: V_INDSECT LIKE MARA-MBRSH.
End generated data section ***
start-of-selection.
CALL FUNCTION 'UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = ' '
FILETYPE = ' '
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
TABLES
data_tab = record
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_dataset using dataset.
perform open_group.
LOOP AT RECORD.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
*- Validating industry sector(MBRSH) from the master table(MARA)
select single MBRSH from T137 into V_INDSECT where MBRSH eq
record-MBRSH_001.
IF SY-SUBRC EQ 0.
perform bdc_field using 'RMMG1-MBRSH'
record-MBRSH_001.
*endif.
perform bdc_field using 'RMMG1-MTART'
record-MTART_002.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
record-KZSEL_01_003.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX_004.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
record-MEINS_005.
perform bdc_field using 'MARA-MTPOS_MARA'
record-MTPOS_MARA_006.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM01'.
*ELSE.
*message E000 WITH 'Industry sector does not Exist' .
*endif.
LOOP AT MESSTAB.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = MESSTAB-MSGID
LANG = MESSTAB-MSGSPRA
NO = MESSTAB-MSGNR
V1 = MESSTAB-MSGV1
V2 = MESSTAB-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = IT_STORE_MSG-STORE
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 0.
IF MESSTAB-MSGTYP = 'S'.
IT_SUCCESS-SUCCESS_REC = IT_STORE_MSG-STORE.
IT_SUCCESS-MBRSH = record-MBRSH_001.
IT_SUCCESS-TABIX = TABIX.
APPEND IT_SUCCESS.
ELSEIF MESSTAB-MSGTYP = 'E'.
IT_ERROR-ERROR_REC = IT_STORE_MSG-STORE.
IT_ERROR-MBRSH = record-MBRSH_001.
IT_ERROR-TABIX = TABIX.
APPEND IT_ERROR.
ENDIF.
endloop.
endif.
ENDLOOP.
CALL FUNCTION 'DOWNLOAD'
TABLES
DATA_TAB = IT_error
FIELDNAMES =
EXCEPTIONS
INVALID_FILESIZE = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform close_group.
*perform close_dataset using dataset.Hi,
DATA: IT_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE .
CALL FUNCTION 'DOWNLOAD'
TABLES
DATA_TAB = IT_error
FIELDNAMES =
EXCEPTIONS
INVALID_FILESIZE = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
instead of using IT_error ion tables use IT_MESSTAB.
<REMOVED BY MODERATOR>
Code Formatted by: Alvaro Tejada Galindo on Apr 9, 2008 5:07 PM -
I can´t start photoshop cs4 error: Photoshop CS4 stopped working.
Hay,
My computer is a new computer that I bought 12/26/2008
PC CONFIGS: 3GBs RAM DDR3, Core i7 920, Radeon HD4870, Windows Vista Ultimate x64, 1 TB of HD 600 GB free
, and when i try to run the Adobe Photoshop CS4 32bits it says to me that it stopped working so it show me this problem:
Assinatura do problem:
Nome do Evento de Problema: APPCRASH
Nome do Aplicativo: Photoshop.exe
Versão do Aplicativo: 11.0.0.0
Carimbo de Data/Hora do Aplicativo: 48d3882e
Nome do Módulo de Falhas: StackHash_fd00
Versão do Módulo de Falhas: 0.0.0.0
Carimbo de Data/Hora do Módulo de Falhas: 00000000
Código de Exceção: c0000005
Deslocamento de Exceção: 00000000
Versão do sistema operacional: 6.0.6001.2.1.0.256.1
Identificação da Localidade: 1046
Informações Adicionais 1: fd00
Informações Adicionais 2: ea6f5fe8924aaa756324d57f87834160
Informações Adicionais 3: fd00
Informações Adicionais 4: ea6f5fe8924aaa756324d57f87834160
Leia nossa declaração de privacidade:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0416
Im brazilian and the it is in portuguese.
additional: (im using the trial version, 30 days for use)Hi All
Am having the same problem with (Roft) with the same computer specs.
Problem signature
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 11.0.0.0
Application Timestamp: 48d3882e
Fault Module Name: StackHash_f4b6
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 00000000
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 1033
Additional Information 1: f4b6
Additional Information 2: 9227a0f2bedc12733cd08560b33a6046
Additional Information 3: 271e
Additional Information 4: f9344aa6e003b5e529741a1c1f77ed75
Extra information about the problemBucket ID: 971725909
My account is an admin account but this the error occured.
Checked and all the drivers and all seems to be fine.
Please help!!!
Thank you, -
Preview versus Real View Not the Same, Site Definition Errors - Dreamweaver CS4
I am having trouble working on sites where it seems that Dreamweaver wants me to specify different file locations for various "includes" depending on whether I want to view the site as a preview (F12) vs. on a local test server vs. on the real website server. Note I am using Dreamweaver CS4 (ver. 10) on Windows, my local test server is Apache running via an Xampp installation on Windows, and my production server is also Apache, running at Hostgator. I am building a fairly basic html site using SSI via SHTML files, rather than PHP or a more sophisticated method. Here is what seems to be happening:
1. In my index.shtml file I call, for example, a subheader file called "header-nosub-menu.inc.htm." I have my site definitions set to "relative to document root." Using the insert -> SSI command, Dreamweaver links to the file with the following: My first problem is that, as specified, the subheader.menu.inc.htm file is not found and the preview gives me an error. I get the same error if i try to display the file on my local test server (http://localhost/domainname). However, if I upload the file to my production server, it seems to work fine. If I change the include command to: #include virtual="./includes/subheader.menu.inc.htm," by manually inserting the "./" to change the directory reference, then the file seems to work in all three situations Which is the correct directory specification, and why is Dreamweaver not generating it automatically?
While I can make the manual changes in the directory specifications, I am concerned that if Dreamweaver is making an error in this instance, it may generate more serious problems that are harder to find later.
2. The second issue seems to involve the Site Definition file configuration.I get an error message when I set up my site definition in what seems to be the correct way, specifically, using the following specifications:
Local Root folder: "C:\htdocs\domainname-dev\"
http address: "http://www.domainname/"
testing server folder: "C:\htdocs\domainname-dev"
url prefix: "http://localhost/domainname-dev"
The error message is: "The site url prefix for the testing server does not match the site url prefix specified in the http address for the site."
However, when I change the testing server url prefix to one that does not yield an error message ("http://localhost") I then have problems with the preview (F12) display. Specifically, instead of a preview request generating the following url: "http://localhost/domainname-dev/TMPm393xnclqu.shtml" I find that it generates the following: "http://localhost/TMPm393xnclqu.shtml" The so called incorrect definition seems to be the correct one, but why is Dreamweaver not recognizing it as such? Am I making a error somewhere else in my configuration?
I would appreciate any assistance that anyone here can provide,
Thanks,
http://localhost/except for the Apache virtual host configuration, which I do not see a need for
I wasn't suggesting that you use virtual hosts (although I have defined about 50 virtual hosts on my own development machine). I was trying to understand the url you listed:
http://www.domainname/
Without a virtual host definition, that would have no meaning and could not point to anything, unless you simply were leaving off the TLD in the example. (.com, .net, etc)
I often use the PHP $_SERVER superglobal to define paths and handle differences between the development environment and the remote server environment. Examples:
DOCUMENT_ROOT: D:/ZendServer/Apache2/htdocs/website/ranch (machine path)
REQUEST_URI: /topic/calendar (url parameters)
SCRIPT_NAME: index.php
HTTP_REFERER: (the url of the script preceding the current script)
HTTP_HOST: (this is the domain name. It is very useful for distinguishing between the local and remote environments)
COMPLETE EXAMPLE:
echo "<p><a class='noPrint' href='".$_SERVER['HTTP_REFERER']."'>RETURN TO PREVIOUS PAGE</a></p>"; -
Invalid Number Error Please help Urgent
Hi,
I am trying to create a report in discoverer where in I get an invalid number error for the statement
,DECODE(final.TYP,'Sales',to_char(final.future_supplpy),'B/O','B/O') sale_type.
We have the requirement that when TYP is Sales i need to display future supply and when the TYP is B/O i need to display B/O.
The query runs perfectly fine in TOAD but in Discoverer Desktop when i run the report i get an error message
invalid number.
Please help its urgent
Thanks
AshwiniHi Ashwani
First of all, your statement appears to not be handling anything other than Sales or B/O. Is that deliberate? If not, you need a default, catch all value at the end like this:
DECODE(final.TYP,'Sales',NVL(final.future_supply,to_char(final.future_supply),'B/O','B/O', default_value) sale_type
You also might want to make sure there aren't any NULL values in future_supply or in TYP and if there are you might want to consider using an NVL for these, like this:
DECODE(final.TYP,'Sales',NVL(to_char(final.future_supply,NULL),'B/O','B/O', default_value) sale_type
Also, when using DECODE you don't always need to use TO_CHAR as the DECODE conversion to a string typically takes place automatically. CASE is different as it insists that all results are of the same data type.
Hope this helps
Best wishes
Michael -
CREATING A RECORDSET ERROR "UNIDENTIFED ERROR HAS OCURRED
I am trying to create a record set which is for a mysql database containing images and details about the images.
When using the Create RecordsSet in Dreamweaver CS4 I get this error whenever I include the filed which holds the image data.
Mysql Database is as follows
CREATE TABLE IF NOT EXISTS `phpriot_demo`.`images` (
`image_id` BIGINT(20) UNSIGNED NOT NULL AUTO_INCREMENT ,
`filename` VARCHAR(255) NOT NULL ,
`mime_type` VARCHAR(255) NOT NULL ,
`file_size` INT(11) NOT NULL ,
`file_data` LONGBLOB NOT NULL ,
PRIMARY KEY (`image_id`) ,
UNIQUE INDEX `image_id` (`image_id` ASC) ,
INDEX `filename` (`filename` ASC) )
ENGINE = MyISAM
AUTO_INCREMENT = 2
DEFAULT CHARACTER SET = latin1
It doesn't throw up an error with any of the other fields? Is there something I am doing wrong?Horsemad Gilly wrote:
I had looked at the arguments and had gone with this option but cant get the images to display back in the webpage, I am having problems in understanding the proxy script correct to enable the image to show,
I agree with Murray that storing images in a database is a bad idea, but if you really want to do it, you can find instructions here: http://cookbooks.adobe.com/post_Upload_images_to_a_MySQL_database__PHP_-16609.html. Dreamweaver doesn't handle file uploads automatically, so you need to edit the script manually.
You can also learn how to display an image using a proxy script in this article: http://cookbooks.adobe.com/post_Display_an_image_stored_in_a_database__PHP_-16637.html. -
Whenever I try to create a recordset I get an error, i
reinstalled still
there:
"While executing applyServerBehaivor in Recordset.htm, a
Javaqscript error
occurred."
Any ideas ? I cant work !!!
AleksAleks wrote:
> Whenever I try to create a recordset I get an error, i
reinstalled still
> there:
>
> "While executing applyServerBehaivor in Recordset.htm, a
Javaqscript error
> occurred."
http://www.adobe.com/go/tn_19105
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/
Maybe you are looking for
-
Separate Cost of Goods Sold accounts
Hi, How can I have separate Cost of Goods Sold GL accounts to track my Export and Domestic Sales ? Regards, Manoj
-
Report and Notification Settings don't work anymore
I click on Customize Settings and get: I can't configure anything! Also all my reports have stopped being emailed to me! Did the website 'redo' mess something up?
-
Autorun PDF on CD in Acrobat 7 and above
I have a large problem. I am trying to autorun a PDF file (created in Acrobat Pro 9) to Autorun on a CD in Reader 7 and above. I have tried having reader on the CD and it doesnt work. My computer has autorun enabled. I have tested the CD on multiple
-
I am currently in the process of porting an existing application (Biztalk 2004) to a newer version of Biztalk. The current solution takes multiple types of EDI documents, modifies it if its necessary and sends it to our legacy system to be loaded and
-
I upgraded my Iphone 4s with the new operating system. After the upgrade was performed all my contacts were lost. How do I recover my phone contacts?