RecordsLocation Problem When Distributing
Problem: I have installed a Course I've developed but it keeps using the old settings and records from a previous installation.
Everything works fine while I am developing and even after I publish my course. I can save user settings and read them back with no problem. I used FileLocation^"My Records" as the third argument in the JumpFile function so I can store the records where the Authorware file is at.
I used RecordsLocation^"My Records/file.txt" to write and read the files with no problem.
The problem happens after I installed my course using an installation program. While testing the Course, I found it does not write or read from where the Course is at. Hence, if I install and uninstall the course, and reinstall the Course, it reads the old settings I had previously saved.
I want to delete or remove all old settings and records when I do an uninstall of the Course so when I do a reinstallation of the Course, everything is set to its originally values.
I used the RecordsLocation variable in my Course so I can see where the records are stored and it displays local..e.g c:\Program Files (86)\Course\RecordFolder\ so I know it is not supposed to be using the Authorware default of c:\\\A6W_data.
Thanks for your help
Maafi
I finally figured out my Course folder didn't have write permissions when it gets installed. So I changed a setting in my installation program to make the Course folder with user permission of Modify. The course is not web but for installing on a local hard drive. It finally works!!
Thanks for the quick response.
Maafi
Similar Messages
-
Problems when distributing AUC to asset
Hi all,
I have tried to search all the notes and forum but cannot find a solution.
My user tried to post a $2000 account in auc to a fixed asset account using line item distribution rule. The amount in the rule is $2000, exactly the same as the auc account.
But there is this error message when he post,
"Amount to capitalize is lower than 10,000 SGD, please check!
Message no. Z3 002"
But he has posted amount less than 10,000 before and there are no such limitation. I cannot identify where or what causes the limitation.
Anybody can help?
Albert LeeHi,
I have tried t.code oba0 but it is not recognized. I am using 4.0B
oba4 I got the following result
Upper limits for posting procedures
Amount per document 1,000,000,000,000.00
Amount per open item account item 10000,000,000.00
Cash discount per line item 10.000%
Permitted payment differences
Revenue 10%
Expense 10%
It seems that amount is within limit.
My AUC account is $33,300 but my user is posting one of the line item which is $2000, using the distribution rule fixed amount of $2000, which is the same as the amount to post. According to my user, he has posted smaller amount without encountering this problem.
Any other place I can check or what can i do to allow the posting?
Albert Lee -
Nexus 1000V. problem when working with the console VMWare
I have a problem when working with the console VMWare.
Sometimes it is impossible to connect any of the hypervisor to the guest OS managed by them.
I get the message: "Unable connect to the MKS: Host address lookup for server <name of the hypervisor> failed: No such host is known."
This message always appears in conjunction with the reconfiguration of virtual switch: "Reconfigure vNetwork Distributed Switch .... Initiated by Cisco_Nexus_1000V_ ....."
Upon completion of the reconfiguration, Communication console, with guest OS is restored, or on its own or after a reboot srv-vc.
In this time, I do not see any message in Nexus 1000v log.
What is this?
Thanks in advance.Smells of a DNS issue. Are you sure your ESX hosts are reachable from your client via DNS hostname? Try pinging them from a command prompt/terminal. You may have DNS server issues.
As a temp fix, edit your [windowspath]/system32/etc/drivers/hosts file and manually add the ESX host name and IP, then re-test.
Regards,
Robert -
Problem when loading from ODS to the CUBE
Hi Experts,
I am facing an unusual problem when loading data from ODS to the cube.
I have a first level ODS where the delta postings are updated. I have checked the active table of the ODS and the data is accurate.
I have deleted the entire data from the Cube and trying to do a full load from ODS to the CUBE.
I am sure when I run a full load the data goes from Active table of the ODS.
After the full load the the keyfigure values are 0. I have tried doing the testing by loading couple of sales documents and still the keyfigure values are 0.
I wonder when I load the full. The data should be picked exactly the way it is in active table of the ODS.
I also dont have any fancy routines in the update rules.
Please help me in this regard.
Regards
RaghuHi,
Check the procedure did u do that exactly or not. just follow the the laymen steps here:... and let me know ur issue
o First prepare a flat file in Microsoft excel sheet for master data and transaction data and save it in .CSV format and close it.
o First select info objects option and create info area then create info object catalog then char, & key figure. Then create id in Char, Name as attribute activate it then in key figures create no and activate it.
o In info sources create application component then create info source with direct update for master data and flexible update for transaction data. The flat files would be created for master data create info package and execute it.
o For transaction data go to info provider then select the file right click on it then select option create ODS object. Then a new screen opens give the name of the ODS and create other screen opens then drag character to key fields.
o Activate it then update rules it will give error to it then go to communication structure and give 0Record mode then activate it then go to update rules it will activate it.
o Then go to info source then create info package then external data then processing update, Data targets then the scheduling then click start then the monitor.
o Then other screen opens there we can see if we doesnt able to see the records then come back to the info provider right click on it then other screen opens then select the option activate data in ODS then a screen opens.
o so select the option QM where it would be in a yellow co lour then by double click then another screen opens then select green color option then click continue it and it comes to the previous screen then select the option and click save it would be underneath of it just click it up and close it.
o Then come back to the main screen to the info source to the info package go to the package and right click on it then a screen opens then click schedule without distributing any of the tab directly click the monitor tab. Then refresh it until the records come to the green.
o Once it is green the click the data target and see the file executed.
o Now go to the info provider then a right click on the file name then create info cube. Then a new screen opens and gives the name and activates it. The drag the key figures to the other side, time characteristics to the other side, and chacetristics to the other side.
o Then create the dimension table then assign it and activate it .Then go to file name right click on it then select the option create update rules select ODS option and give the file name and activate it .
o Then come back to the main screen and refresh it. Whenever you see 8 file names you will know that it is undergoing the data mart concept.
o In the main screen click ODS file right click then a pop up screen opens select the option update ODS data target. Then another screen opens in that we are able to see 2 options full update, initial update then select initial update.
o Then another screen opens info Package there the external data , data targets , scheduler select the option later in background option then a another screen opens just click immediate then click save automatically it closes then click start option.
o Then select monitor option then the contents then the field to be elected then the file to be executed.
regards
ashwin -
Problem while distribute software via Java Web Start
Hi,
I use JWS to distribute my software to the clients. I use apache 2.2 as webserver.
My Problem:
When i put a update a jar on the webserver, the clients have to start JWS twice to get the new file.
First i thought it is a problem with the webserver. So i have restarted the apache after i�ve put the new jar. ... without success.
Are there any settings in JWS which take affect?
Any ideas?
TomThe default behavior is to timeout if checking for an update takes too much time.
You can add the jnlp element:
<update check="always"/>
and updates will always happen on the forst launch (when client is using Java Web Start 1.6.0 or later, update element will be ignored by earlier versions)
see: http://java.sun.com/javase/6/docs/technotes/guides/javaws/developersguide/syntax.html#security
/Andy -
I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions? Please??? :-)
Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
Every time I click on a web site that has an email option the browser starts making untitled web pages and never stops unless I turn the computer off. It is very frustrating to not be able to use an email option when offered by a web site. The only way I can send email messages on the Firefox browser is to go into my hotmail acct. and copy and paste the addresses. I don't have this problem when I use the Internet Explorer browser.
See [[Firefox keeps opening many tabs or windows]]
-
Firefox gets problems when 2,7 GB of memory is used by Firefox
Firefox gets problems when 2,7 GB of memory is used by Firefox. Or more. Like 2,8 GB.
It started when I read jpost.com with tens of tabs open. I don't remember how many. But I know there was more than 40.
On the tab I that I was reading, the page turned completely black. Pitch black with nothing else, not even the Firefox interface. It was actually a pitch black shape that looked like a web page in shape. The blackness quickly disappeared and the page was normally readable again. But then it happened again - the page turned black again.
The same page turns black happened again later.
One of my browsing sessions had Firefox slow down so much that you could see scrolling happening when I used scrolling.
Still another time I had 60 tabs open and Firefox worked completely fine without freezes, slowdowns, or black shapes. I could close Firefox by just pressing the red X in the title bar.
Yesterday, I had 50 tabs open and I experienced a slowdown when I looked at the Breaking News headlines. The headlines would show slower than usual. The Breaking News headlines at jpost.com show the headlines a few words at a time until the headline is completely shown. Then the headline disappears and the next starts showing a few words at a time. And speed in general was not what you normally have with a computer that has 8 GB of memory. And a Core i5 processor. I opened two more tabs from the Breaking News section I had opened. After I opened a new window, Firefox froze. I had to close Firefox from the Task Manager by pressing End process. I had used Firefox for 6 hours without ever closing any of the tabs I had opened.
In all of these cases, more than 40 tabs were open. In all of these cases, the slow down or freeze meant I had to use Task Manager and then press End process on the Processes tab. In all cases except the two I describe in the next paragraph, I never close any tabs after opening them. No problems have ever happened until Firefox started using 2,7 GB of memory. Until that point, everything is normal with no freezes or slowdowns.
At two times, I tried to reduce memory usage by closing tabs. However, in both cases this would make Firefox freeze. In one of these cases, Firefox would show something bizarre: there would be about 7 tabs, and one of the tabs would be partly shown. Also, Firefox would show the busy cursor. Firefox did not show how many tabs I actually had. The second time, I tried to close the tabs by clicking Close other tabs in the menu that you get when right-click a tab. The tabs would close fine, but I remember that I opened Gmail and then I did this: I clicked on the Promotions tab. Instead of seeing the tab with the Emails, Firefox showed a busy cursor and the title bar said not responding. Firefox froze.
The reason might be Adblock Plus memory usage. In Adblock Plus home page, developer Wladimir Palant writes in his blog about how Adblock Plus uses a lot of memory: https://adblockplus.org/blog/on-the-adblock-plus-memory-consumption .One more bit of information: I have a Geforce 640 GT graphics card. My graphics card drivers are old- version 311.41. The newest version of the drivers is 340.52. Would a new graphics card driver solve the problem?
-
Problem when I execute program SCM in background
Hi experts,
I am with problem when I execute a program (SCM) in background. I inserted a new field (estoque_seg(10)) and the process stopped at execute in background.When I call transaction and press F8, works but for this, I need jump the consistence IF sy-batch IS INITIAL....Dont has any bath imput, only functions. Any idea?
Follow below the code:
Estrutura para tabela ENTRADA
DATA: BEGIN OF st_entrada,
matnr(40) TYPE c,
werks(20) TYPE c,
ponto_abas(10) TYPE c,
estoque_max(10) TYPE c,
cobertura(10) TYPE c,
estoque_seg(10) TYPE c, " Erlon Lourenço 20/01/2011
END OF st_entrada.
Estrutura para tabela de LOG
*TYPES: BEGIN OF st_saida,
pernr(8) TYPE c ,
date(10) TYPE c,
er_contribuition(15) TYPE c,
tax(15) TYPE c,
msg_erro(80) TYPE c,
END OF st_saida.
Tabela para obter descricao da mensagem
*DATA: ti_saida TYPE STANDARD TABLE OF st_saida WITH HEADER LINE
INITIAL SIZE 0.
Tabela que recebera o arquivo texto
DATA: BEGIN OF ti_entrada OCCURS 0.
INCLUDE STRUCTURE st_entrada.
DATA: END OF ti_entrada.
DATA: BEGIN OF it_matid OCCURS 0,
matnr TYPE /sapapo/matkey-matnr,
matid TYPE /sapapo/matkey-matid,
END OF it_matid.
DATA: BEGIN OF it_locid OCCURS 0,
locno TYPE /sapapo/loc-locno,
locid TYPE /sapapo/loc-locid,
END OF it_locid.
DATA: BEGIN OF it_matlotsz OCCURS 0,
target_dur TYPE /sapapo/matlotsz-target_dur,
END OF it_matlotsz.
DATA: wa_matloc LIKE /sapapo/matloc OCCURS 0 WITH HEADER LINE,
wa_matlsim LIKE /sapapo/matlsim OCCURS 0 WITH HEADER LINE,
wa_matlotsz LIKE /sapapo/matlotsz OCCURS 0 WITH HEADER LINE.
Variáveis Globais
DATA: v_tabix TYPE sy-tabix,
v_vrsioid TYPE /sapapo/apo01-vrsioid,
v_tam TYPE i.
Select-Options & Parameters
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_versao TYPE /sapapo/apo01-vrsioex OBLIGATORY DEFAULT '000',
p_abas AS CHECKBOX ,
p_est AS CHECKBOX ,
p_cober AS CHECKBOX ,
p_estsg AS CHECKBOX. " ERLON LOURENCO - 20/01/2012 - Estoque Segurança
SELECTION-SCREEN END OF BLOCK b1.
Start-of-Selection
START-OF-SELECTION.
PERFORM consiste.
PERFORM f_upload.
PERFORM f_processa_batch.
PERFORM f_saida_dados.
MESSAGE i000 WITH 'Processo encerrado com Sucesso'.
END-OF-SELECTION.
*& Form F_UPLOAD
text
--> p1 text
<-- p2 text
FORM f_upload .
DATA: lc_file TYPE string.
TYPES: BEGIN OF st_ent,
cam(80),
END OF st_ent.
DATA: ti_ent TYPE STANDARD TABLE OF st_ent WITH HEADER LINE
INITIAL SIZE 0.
RANGES: r_file FOR zget0001-field_content.
r_file[] = zbs_constantes=>obter( i_bukrs = space i_field = 'FILE' i_process = 'PONTO-REAB' ).
READ TABLE r_file INDEX 1.
lc_file = r_file-low.
CLEAR: ti_entrada,
ti_entrada[],
ti_ent,
ti_ent[].
abrir arquivo para leitura
OPEN DATASET lc_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
MESSAGE i000 WITH text-e01.
STOP.
ENDIF.
Leitura de arquivos
DO.
READ DATASET lc_file INTO ti_ent.
IF sy-subrc <> 0.
EXIT.
ENDIF.
APPEND ti_ent.
ENDDO.
Fechamento do arquivo
CLOSE DATASET lc_file.
LOOP AT ti_ent.
SPLIT ti_ent AT ';' INTO ti_entrada-matnr ti_entrada-werks ti_entrada-ponto_abas ti_entrada-estoque_max ti_entrada-cobertura ti_entrada-estoque_seg.
APPEND ti_entrada.
ENDLOOP.
ENDFORM. " F_UPLOAD
*& Form F_PROCESSA_BATCH
text
--> p1 text
<-- p2 text
FORM f_processa_batch .
LOOP AT ti_entrada.
v_tabix = sy-tabix.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-matnr
IMPORTING
output = ti_entrada-matnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-ponto_abas
IMPORTING
output = ti_entrada-ponto_abas.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-estoque_max
IMPORTING
output = ti_entrada-estoque_max.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-cobertura
IMPORTING
output = ti_entrada-cobertura.
IA - ERLON LOURENCO - 20/01/2012
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-estoque_seg
IMPORTING
output = ti_entrada-estoque_seg.
FA - ERLON LOURENCO - 20/01/2012
MODIFY ti_entrada INDEX v_tabix.
ENDLOOP.
CLEAR: it_matid,
it_matid[],
it_locid,
it_locid[],
wa_matlsim,
wa_matlsim[],
wa_matloc,
wa_matloc[].
SELECT matnr matid INTO TABLE it_matid FROM /sapapo/matkey
FOR ALL ENTRIES IN ti_entrada WHERE matnr = ti_entrada-matnr.
SELECT locno locid INTO TABLE it_locid FROM /sapapo/loc
FOR ALL ENTRIES IN ti_entrada WHERE locno = ti_entrada-werks.
IF p_versao = '000'.
LOOP AT ti_entrada.
READ TABLE it_matid WITH KEY matnr = ti_entrada-matnr.
IF sy-subrc = 0 .
READ TABLE it_locid WITH KEY locno = ti_entrada-werks.
IF sy-subrc = 0.
SELECT SINGLE * INTO wa_matloc FROM /sapapo/matloc WHERE matid = it_matid-matid AND
locid = it_locid-locid.
IF sy-subrc = 0.
IF p_abas = 'X'.
wa_matloc-reord = ti_entrada-ponto_abas.
ENDIF.
IF p_est = 'X'.
wa_matloc-maxstock = ti_entrada-estoque_max.
ENDIF.
" IA - Erlon Lourenço - 23/01/2012
if p_estsg = 'X'.
wa_matloc-safty = ti_entrada-estoque_seg. " Erlon Lourenço - 23/01/2012
endif.
"FA - Erlon Lourenço - 23/01/2012
IF p_abas = 'X' OR
p_est = 'X' OR
p_estsg = 'X'. " Erlon Lourenço - 23/01/2012
APPEND wa_matloc TO wa_matloc.
ENDIF.
SELECT SINGLE * INTO wa_matlotsz FROM /sapapo/matlotsz WHERE lszid = wa_matloc-lszid.
IF sy-subrc = 0.
IF p_cober = 'X'.
wa_matlotsz-target_dur = ti_entrada-cobertura.
APPEND wa_matlotsz TO wa_matlotsz.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP. " LOOP AT ti_entrada.
ELSE.
Verifica versáo para saber se preenche a tabela wa_matlsim
SELECT SINGLE vrsioid INTO v_vrsioid FROM /sapapo/apo01 WHERE vrsioex = p_versao.
IF sy-subrc = 0.
SELECT * INTO TABLE wa_matlsim FROM /sapapo/matlsim WHERE simid = v_vrsioid.
IF wa_matlsim[] IS NOT INITIAL.
LOOP AT ti_entrada.
READ TABLE it_matid WITH KEY matnr = ti_entrada-matnr.
IF sy-subrc = 0 .
READ TABLE it_locid WITH KEY locno = ti_entrada-werks.
IF sy-subrc = 0.
READ TABLE wa_matlsim WITH KEY matid = wa_matloc-matid
locid = wa_matloc-locid.
IF sy-subrc = 0.
wa_matlsim-reord = ti_entrada-ponto_abas.
wa_matlsim-maxstock = ti_entrada-estoque_max.
wa_matlsim-safty = ti_entrada-estoque_seg. " Erlon Lourenço - 23/01/2012
MODIFY wa_matlsim INDEX v_tabix.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP. " LOOP AT ti_entrada.
ENDIF. " IF wa_matlsim[] IS NOT INITIAL.
ENDIF. " IF sy-subrc = 0. 1º
ENDIF. "IF p_versao = '000'
Funcáo que atualiza campos nas bases de dados.
CALL FUNCTION '/SAPAPO/DM_PRODUCTS_POST'
EXPORTING
iv_vb = 'U'
TABLES
it_matloc = wa_matloc
it_matlsim = wa_matlsim
it_matlotsz = wa_matlotsz
EXCEPTIONS
not_qualified = 1
insert_failed = 2
update_failed = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " F_PROCESSA_BATCH
FORM BDC_DYNPRO
*& Form F_SAIDA_DADOS
text
--> p1 text
<-- p2 text
FORM f_saida_dados .
IF ti_saida[] IS NOT INITIAL.
DATA: lc_file TYPE string.
lc_file = p_erros.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = lc_file
FILETYPE = 'ASC'
TABLES
data_tab = ti_saida
FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE i005 WITH 'Error to unload file !'.
STOP.
ENDIF.
ENDIF.
ENDFORM. " F_SAIDA_DADOS
*& Form CONSISTE
text
--> p1 text
<-- p2 text
FORM consiste .
IF p_abas IS INITIAL AND
p_est IS INITIAL AND
p_cober IS INITIAL AND
p_estsg IS INITIAL. " ERLON LOURENCO - 20/01/2012 - Estoque Segurança
MESSAGE i000 WITH text-e03.
STOP.
ENDIF.
IF sy-batch IS INITIAL.
MESSAGE i000 WITH text-e02.
STOP.
ENDIF.
Best regards,
Erlon Lourenço
Edited by: Erlon Louren on Jan 27, 2012 11:09 AMHi Raja,
Check weather there are any enhancements to the datasource.If yes once check the code in CMOD.Seems there is some discrepency in that.
Regards
Karthik -
Design problem when using Area Group Page -- BSP
We have installed MSS ERP2004 and are using the webdynpro based Area Group Page. From this page we have added links to diffrent BSP application (using BSP-iviews in the PCD).
The problem:
When we opens one of these links from the Area Group Page the BSP application is opening but the portal design is not inherited.
The strange thing is that if we refresh the iview the portal design is inherited.
Why did it not work when opened at first?
'Support portal integration' is ticked of in the BSP application.
'Supply Portal Stylesheet' is set to 'Yes' for the iview in the PCD.
We are running ERP2004/WAS6.40.
Anyone with the same experience?
Regards
BjornWe have installed MSS ERP2004 and are using the webdynpro based Area Group Page. From this page we have added links to diffrent BSP application (using BSP-iviews in the PCD).
The problem:
When we opens one of these links from the Area Group Page the BSP application is opening but the portal design is not inherited.
The strange thing is that if we refresh the iview the portal design is inherited.
Why did it not work when opened at first?
'Support portal integration' is ticked of in the BSP application.
'Supply Portal Stylesheet' is set to 'Yes' for the iview in the PCD.
We are running ERP2004/WAS6.40.
Anyone with the same experience?
Regards
Bjorn -
Hello All,
we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
I have checked IP,DNS,Gateway and more each & everything is well.
Pls suggest us.
Pankaj KumarHi,
According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
Please try to enable the option below on the device which has shared folder:
Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN c
I met a problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN clients:
1. Background:
We have two WLAN: staff and student, both of them will use PEAP-MSCHAPv2, ACSE will be the Radius server, it will use Windows AD's user database. In AD, they create two groups: staff and student. The testing account for staff is staff1, the testing account for student is student1.
2. Problem:
If student1 try to associate to staff WLAN, since both staff and student WLAN using the same authentication method, the auth request will be send to AD user database, since student1 is a valid user account in AD, then it will pass the authentication, then it will join the staff WLAN. How to prevent this happen?
3. Potential solution and its limitation:
1) Use group mapping in ACSE(Dynamic VLAN Assignment with WLCs based on ACS to Active Directory Group Mapping), but ACS can only support group mapping for those groups that have no more than 500 users. But the student group will definitely exceed 500 users, how to solve it?
2) Use methods like âRestrict WLAN Access based on SSID with WLC and Cisco Secure ACSâ: Configure DNIS with ssid name in NAR of ACSE, but since DNIS/NAR is only configurable in ACSE, don't know if AD support it or not, is there any options in AD like DNIS/NAR in ACSE?
Thanks for any suggestions!I think the documentation for ACS states:
ACS can only support group mapping for users who belong to 500 or fewer Windows groups
I read that as, If a user belongs to >500 Windows Group, ACS can't map it. The group can have over 500 users, its just those users can't belong to more than 500 groups. -
i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance
i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance
-
Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?
-
Safari problem: when I switch back into safari from another application, the menu bar comes up but no tabs or windows. What's going on? Just started yesterday. I have found a workaround: when I Command Tab back to safari, I hit command T to open a new tab and Command W to close it, and my other tabs are visible.
I have tried shutting down, closing tabs, with no success. What's going on and how can I fix it?
Thanks,
Cindi B
PS: I'm not sure of the actual OS level, but I have not allowed it to upgrade to Maverick yet; concerned about it because of a few things I've read...A Safari extension or third party plugin may be causing the menu bar issue.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
As for which OS X is installed.
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
The version is noted there.
v10.6 Snow Leopard v10.7 Lion v10.8 Mountain Lion
It's your choice whether or not to upgrade to Mavericks. If you decide to do this, make sure your Mac meets the requirements noted here.
Maybe you are looking for
-
With Windows 8.1 i can't select right click on my wi-fi networks
I installed windows 8.1 couple days ago and just realized that i can't right click every time i go to my wifi networks. Any advice on how i should solve that issue?
-
Hi Experts, How can you configure to check enough money in the house bank when you have a outgoing payment?? Pls give me answer a.s.s.p Thanks, DatNH
-
No update server found for context :e:
i have sap netweaver 7.0 abap trial version on my machine. i have navigated to se80 and write a program while walking with this weblog : https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6270 [original link is broken] [original link is broken] [o
-
Hi, I am working in a scenario where I need to receive messages from multiple publishers on different fork branch and sequence it. I have configured the scenario as mentioned in basis namespace example. I but it looks like even in parallel branches f
-
Usual computer crashes during synchronisation. Can I trust my PC to update my iPod anymore?
OK, While my iPod touch 4G is Sync-ing with my netbook (Acer aspire one, Win 7 starter) I get a pop-up error diologue box; "iTunes has crashed and needs to be closed. Sorry for this inconveinience" -Do excuse my spelling ;D Should I trust this PC to