Recover anything in recovery mode
hi
is there any suggested third-party tool for recovery ios in recovery mode ?
thanks
No. Once you're in Recovery Mode, the only thing you can do is try restarting the iPhone (which might clear out Recovery Mode, but unlikely). If that doesn't work, then you'll need to finish Recovery Mode, and then restore fro your most recent backup.
Similar Messages
-
HT4623 How to recover form Ipad recovery mode?
How can I recoverd my Ipad from the recovery mode?
It does not restart or restor no functions at all.Did you try restarting by holding down the on/off and home buttons at the same time until you see the Apple logo? Take a look at this link, http://support.apple.com/kb/ts1275
-
HT1338 Recovering ipad from recovery mode
MY pc cant connect for the recovery mode in my ipad
You were redirected here from a help article unrelated to what you're describing. Click the link below and follow the instructions VERY carefully:
If you can't update or restore your iOS device -
How to recover iPhone from recovery mode?
Hi
I tried to Update my iPhone 3G.after update it turned off and asked for Restore. I tried to restor but error occured.
Now my iPhone is not getting started
when i switch it off and then on only an image appears (SHOWING DATA CABLE HEADING TOWARDS ITUNES) for few seconds and then screen turns off.
when i hit the itune it gives me msg " iTUNES HAS DETECTED AN IPHONE IN RECOVERY MODE.YOU MUST RESTORE THIS IPHONE BEFORE IT CAN BE USED WITH iTUNES"
but when i try to restore again an error occures.
CaN anybody help me please as im new user of this phone.Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. Very rarely this error is caused by a hardware issue and requires service.
Specific update-and-restore error messages and advanced troubleshooting -
Recover photos from iPad 2 that's stuck in recovery mode (no backup)
My iPad 2 is stuck in recovery mode (genius bar can't get it out). This happened while I was on vacation and unfortunately some of the videos and photos are not backed up/synced. Before I "restore" through itunes (and erase everything), is there any way to rescue the photos and videos? I've googled third party software and it doesn't look like anything will let you back up your data while the device is in recovery mode.
If I can't rescue anything while the device is in recovery mode, does anyone know if there's a way to retrieve photos from the device directly (not through itunes or icloud) *after* a "restore" (which has wiped the device)? I don't care about anything else on it and I don't care if it has to be put on another device (computer, thumbdrive, etc). The guy at the genius bar said you can't, but I see there are software programs (unfamiliar to me) that promise to do that. I don't know if they really work, though. I wish I understood whether the "restore" process really has the ability to permanently delete photos on the device or whether the photos remain there, but are inaccessible.
I know it's a longshot and it's my own fault for not backing up, but before I do anything irreversible I want to be sure I've exhausted the possibilities. I'm willing to pay for a program/service to retrieve the photos but I am not sure if there's anything out there that will work.
Thanks in advance for anyone's help.No doubt this is too late for you, but it might help others. My 2 1/2 year old iPad 2 running iOS 7.1.1 (I believe) just started having the same problem last night. Til now, it's been running fine with iOS 7, though the battery life seems to be shorter than with iOS 6 & before. Right now, the iPad just keeps recycling through the startup procedure, white apple icon on black screen, then black screen, repeated indefinitely. Tried everything. Google searches gave me this thread/result, that I have to go through the recovery process, and thereby lose all my unsaved photos (my most recent backup is a month old), and others that say I might be able to recover files if I connect to a Windows machine. But I only have Macs. I was about to do the hard reset, recovery procedure, when it occurred to me to just open iPhoto & see if it recognized the iPad. It did--even though iTunes doesn't-- it showed me all of the photos, including the one's between my last iPad backup and now, AND I was able to successfully download all of the photos. YMMV, but this worked for me.
-
How to recover a datafile in recovery mode
Hi,
We have a datafile that's 0 bytes in size and is in recovery mode. I see that the datafile is showing as available in dba_data_files but in v$datafile, it's showing the status as recover. This is in Production and the tablespace has been in this mode since last november. We are not able to offline drop the datafile as it is in recovery mode. How can this be corrected without bringing the instance down? Any thoughts?
Thanks.I would definitely contact Oracle support for something like this on my production database.
Here are some ideas, but some will require some production downtime to complete.
1) Export everything that is in the tablespace that contains the datafile. Drop the tablespace including contents, create the tablespace and import everything back in......Not a good solution but it is a solution...of course there are a lot of things to consider like triggers, foreign keys and similar. This should be tested a lot.
2) Create logical standby with corrected structure and switch to logical standby for production when complete. This will take a lot of work and testing on a test system.
3) Another possibility would be to move tables within this tablespace to a new tablespace and then drop the old tablespace. (Performance hit but safe and no down time).
4) If indexes then drop and recreate new indexes (Performance hit but safe and no down time.)
Once you get everything cleared out of the tablespace you should be able to drop it including contents and storage.
Of course I would try any thing I do out on a test environment before doing anything to my production environment.
Regards -
My iphone is in recovery mode, the itunes and usb cable symble displayed, does this mean that all data is lost or is there some way to recover the data on the phone.
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414 -
Disk Managment cannot recover Macintosh HD in recovery mode
Hi,
Today I used my iMac in Bootcamp and after I was done I tried to restart in Mountain Lion. But it didn't go as expected.
Instead of the normal loading animation I was shown a loading bar that slowly filled. After the loading bar was full I got the normal loading
animation, but it kept going for hours without anything happening.
I decided to turn my iMac off and check the disk in recovery mode. After checking it with disk mamagment it showed some problems and recommended me to recover/repair the disk. That's the point where it goes wrong ,because it can't recover/repair the disk after trying multiple times.
So is there anyone familiair with this problem and if so do you know how to counter it?Your best bet is DiskWarrior, you need the CD/DVD though.
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83 -
HT201263 what if when you put recovery mode it says it cant recover it?
my phone keeps saying activation required. then it says activation error for the beta developer issue. I had this issue before and i followed the steps to recover my phone and it worked fine. but now when i follow the same steps it doesnt let me. itunes gives me an error message, or if i do it the other way it says i have to turn off Find My Phone from iCloud but i cant do that since i cant do anything on my phone. Im so frustrated im thinking about leaving apple. im going to the Genius bar on Thursday but if they cant fix it....forget apple.
Try DFU mode:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current ios 6.0.1. plese send me some thing that is useful
Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.
RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
I tried to update my iPhone 4S but I now keep getting an error saying I need to restore my phone before it can be used because it's in recovery mode! But if I restore it I lose all my media and data and I don't want to do that! Is there anything I can do?? Somone please help, i'm freaking out over here!
Anything that was on the phone is already gone. You have no choice but to restore. If you were backing up and syncing the phone on a regular basis, you should be able to restore your backup with minimal data loss.
-
ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help and my itunes will not see that its connected. i also tried going though control panel and restarting the service and nothing happens. also i tried redoing the driver but its saying it cannot find any drivers for it
lol ok nvm i fixed it
-
i just tried updating my iphone 4 and now my phone is in recovery mode and i dont want to loose anything on my fone someone help please!!!!!
If its stuck in recovery mode then you have to restore it. Hopefully you had a recent backup on Icloud or on your computer that you can apply after restoring it. If so then you shouldn't loose your data.
Just connect it to Itunes and restore it. After it will promt you when your done to restore from backup or as new. If its on icloud unplug the phone and go through the intro screen till you get the same prompt. Sign into icloud and restore backup. -
I see the "Connect to iTunes" screen and the device appears in iTunes. Every time I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete. I have a iPod touch 64gb. I have no idea what OS is on it now that iTunes has tried to recover it and erased all info.
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Maybe you are looking for
-
How do I scan more than one page into a single document? The option seems to have disapperared.
I have a Mac OS X Version 10.6.8 and am trying to scan several pages into one file, but the option to combine pages seems to have disappeared?
-
I just logged in to my itunes and theres an app purchase that I didn't make? What do I do?
Hi, got some itunes gift cards for my birthday. I still had like $24 left when I opened up my itunes today it showed that and then outta nowhere it said I only has $2 and change left. I didn't spend any of it. Check my email and there was apparently
-
One Message Two Possibles receivers (iDoc or BAPI) in an System
Hi All, My Scenario is: JDBC - > BAPI or IDOC the legacy system sends customers to SAP XI... and those customers could be old or new... so... in my interface... I ask with a RFC LookUp.. if the customer exists or have to create a new one. for create
-
in Oracle 10g I want to hide the icon image of the windows. I want the windows shows only the title bar not the icon. Anyone can help me. Yeahia
-
Can I play multiple clips (sequentially) in QuickTime?
For a sports event, I often shoot about 30 video clips, totaling an hour or so, pausing during timeouts etc. My camera is a HD Panasonic, shooting AVCHD onto a SD card. Is it possible to later put the SD card into my laptop and play the whole game?