Recover files after run recovery disk

Hi, i have an a305-s6898 with Xp.
I carry the NB to service and there they run the Recovery Disk (that crash, delete, erase, all my XP system, files, mails, disk partitions, etc)
Does any have an idea if a could recover some files? (mi xp configuration, partitions, files, something?)
Does any have an idea if i should (must or could) call to toshiba center and tell him, that his service center at argentnina sucks!?
Thanks.

The only chance you have of getting anything back is by sending the drive to one of the drive recovery specialist companies and have them see if they can retreive them. There is no guarantee that they will be able to do so and the cost would begin around $1000.00 and go up from there. Unless you have some priceless documents or photos that can't be replaced you might as well just move on.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Similar Messages

Missing partitions after running Recovery from previous System Image Backup in Windows 8.1

After running Recovery from a recent Sytem Image Backup the LRS_ESP partition is now missing and the Used space on the PBR_DRV partition is reported as 95.20MB while it previously reported 9.52GB in use. The WINRE_DRV, SYSTEM_DRV, Windows8_OS and D:LENOVO partions appear to be OK.
I ran the Recover after replacing the original 500GB HDD with a 1TB. Any details/links/recommendations on recreating/correcting the LRS_ESP and PBR_DRV partitions? Thanks!

Here are the before and after partition details obtained through Partition Wizard:
Link to image 1
Link to image 2
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

How do i recover files after being trashed?

how do i recover files after being trashed?

If you emptied the trash, you don't unless they are on your backup disk.

I have a HP Pavilion dv2910us that I am try to recover using the HP recovery disks.

I have a HP Pavilion dv2910us that I am try to recover using the HP Vista Home Premium recovery disks. Recovery disk #1 worked and prompted me to insert disk #2, disk #2 was inserted and ran until only 20% of installing original content was reached. CD/DVD rom light on lower left of the notebook is not lit, wireless light is lit, running. Program ran slowly to reach the 20% mark, over three hours at one or two percentage points at a time. Then for the next 12 hours nothing, no keys or commands on the keyboard have been touched. Please advise next step, thank you.

Hi:
If you can't get the recovery disks to work (I can't help you there), and you can still read all 25 characters of your Vista product key on the bottom of your PC, you can make your own Vista installation disk and use the product key to activate it.
Here's how:
If you're up to a slight but rewarding challenge you can make your own if you can read your 25 character Vista product key on the PC.
Just download the 3 files you need at the link below, and read all of the instructions to create a bootable DVD installation disk using imageburn.
Disregard the part of the text under the first screen shot about "extract the files to the Vista folder."
The files were already extracted to that folder when you ran the X14.exe file by reading the text on top of the first screen shot.
The other thing I noticed is on the 4th screen shot, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in myself, and then the other codes automatically populated.
When I went to compile the ISO file, ImageBurn gave a message that about a WIM file and ISO, and if I wanted to burn it in a different format.
I selected No, make the ISO file.
It was not that hard to do. I burned both the 64 bit disk and the 32 bit disk in case I ever need them.
I tested both of them on my hp dc7100 CMT desktop PC, they worked perfectly.
When you enter the product key, it knows what version of Vista you have.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-v....
After you successfully install Vista, you can then install the drivers from your PC's support and driver page.
Paul

Unable to recover database after rman recovery and database open resetlogs

I am running Oracle 10.2.0.5 on OpenSUSE 9. I have been trying to upgrade the database to 11g, through dbua. I was getting stuck at one point during the Oracle Server install and the upgrade failed and I was forced to restore the database to an earlier backup.
Below is the current place that I am stuck. As you can see I opened the database multiple times and reset the logs. Now I am afraid that my controlfile and redo log backups are out of sync and i can't get them back on track. Before when I actually got the database recovered RMAN would immediately throw:
RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT rows
OPA-00600: ORA-00600: internal error code, arguments: ...
The database would open with ALTER DATABASE RESETLOGS but any query on non-system tables would fail and throw:
ORA-04045: errors during recompilation/revalidation of LCRS_DEV1.FACILITY_REF
ORA-00600: internal error code, arguments: [17069], [0x1158ED180], [], [], [],
I hope I have not dug myself into too deep of a hole here.
Here is the trace from my most recent attempt.
RMAN> startup nomount;
connected to target database (not started)
Oracle instance started
Total System Global Area 3070230528 bytes
Fixed Size 2099424 bytes
Variable Size 301991712 bytes
Database Buffers 2751463424 bytes
Redo Buffers 14675968 bytes
RMAN> list incarnation of database;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 08/02/2011 15:49:04
ORA-01507: database not mounted
RMAN> restore controlfile from autobackup;
Starting restore at 02-AUG-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
recovery area destination: /opt/oracle/flash_recovery_area
database name (or database unique name) used for search: LCRSDEV
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758129928_73jr2s7p_.bkp
channel ORA_DISK_1: control file restore from autobackup complete
output filename=/opt/oracle/oradata/LCRSDEV/control01.ctl
output filename=/opt/oracle/oradata/LCRSDEV/control02.ctl
output filename=/opt/oracle/oradata/LCRSDEV/control03.ctl
Finished restore at 02-AUG-11
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
RMAN> list incarnation of database;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 LCRSDEV 756543625 PARENT 1 22-OCT-05
2 2 LCRSDEV 756543625 PARENT 525876 20-JAN-11
3 3 LCRSDEV 756543625 PARENT 92348137 18-JUL-11
4 4 LCRSDEV 756543625 PARENT 95654931 01-AUG-11
5 5 LCRSDEV 756543625 PARENT 95675699 01-AUG-11
6 6 LCRSDEV 756543625 PARENT 95676699 02-AUG-11
7 7 LCRSDEV 756543625 PARENT 95676700 02-AUG-11
8 8 LCRSDEV 756543625 CURRENT 95676701 02-AUG-11
RMAN> restore database until scn 95676700;
Starting restore at 02-AUG-11
Starting implicit crosscheck backup at 02-AUG-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 6 objects
Finished implicit crosscheck backup at 02-AUG-11
Starting implicit crosscheck copy at 02-AUG-11
using channel ORA_DISK_1
Finished implicit crosscheck copy at 02-AUG-11
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758129928_73jr2s7p_.bkp
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 08/02/2011 15:52:04
RMAN-20208: UNTIL CHANGE is before RESETLOGS change
RMAN> restore database;
Starting restore at 02-AUG-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /opt/oracle/oradata/LCRSDEV/system01.dbf
restoring datafile 00002 to /opt/oracle/oradata/LCRSDEV/undotbs01.dbf
restoring datafile 00003 to /opt/oracle/oradata/LCRSDEV/sysaux01.dbf
restoring datafile 00004 to /opt/oracle/oradata/LCRSDEV/users01.dbf
restoring datafile 00005 to /opt/oracle/oradata/LCRSDEV/LCRS_TBS.dbf
channel ORA_DISK_1: reading from backup piece /opt/oracle/flash_recovery_area/LCRSDEV/backupset/2011_07_22/o1_mf_nnndf_TAG20110722T111922_72m8rc5x_.bkp
channel ORA_DISK_1: restored backup piece 1
piece handle=/opt/oracle/flash_recovery_area/LCRSDEV/backupset/2011_07_22/o1_mf_nnndf_TAG20110722T111922_72m8rc5x_.bkp tag=TAG20110722T111922
channel ORA_DISK_1: restore complete, elapsed time: 00:23:36
Finished restore at 02-AUG-11
RMAN> recover database until scn 95676700;
Starting recover at 02-AUG-11
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/02/2011 16:16:28
RMAN-20208: UNTIL CHANGE is before RESETLOGS change
RMAN> recover database;
Starting recover at 02-AUG-11
using channel ORA_DISK_1
starting media recovery
archive log thread 1 sequence 90 is already on disk as file /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_90_72ml85v3_.arc
archive log filename=/opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73jr20qc_.arc thread=1 sequence=1
unable to find archive log
archive log thread=1 sequence=1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/02/2011 16:25:04
RMAN-06054: media recovery requesting unknown log: thread 1 seq 1 lowscn 95676701

Thanks for the reply Hemant. I have reset the database for the controlfile that I am using as backup and now I am not able to recover until the correct SCN. I am thinking that my recovery catalog is bad. If I mount with the current controlfile I have this list of incarnations:
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
*1 1 LCRSDEV 756543625 PARENT 1 22-OCT-05*
*2 2 LCRSDEV 756543625 PARENT 525876 20-JAN-11*
*3 3 LCRSDEV 756543625 PARENT 92348137 18-JUL-11*
*4 4 LCRSDEV 756543625 PARENT 95654931 01-AUG-11*
*5 5 LCRSDEV 756543625 PARENT 95675699 01-AUG-11*
*6 6 LCRSDEV 756543625 PARENT 95676699 02-AUG-11*
*7 7 LCRSDEV 756543625 PARENT 95676700 02-AUG-11*
*8 8 LCRSDEV 756543625 PARENT 95676701 02-AUG-11*
*9 9 LCRSDEV 756543625 CURRENT 95676702 02-AUG-11*
However if I restore the controlfile to the earlier version I am getting the following output from the process:
RMAN> startup nomount;
connected to target database (not started)
Oracle instance started
Total System Global Area 3070230528 bytes
Fixed Size 2099424 bytes
Variable Size 301991712 bytes
Database Buffers 2751463424 bytes
Redo Buffers 14675968 bytes
RMAN> restore controlfile from '/opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_07_22/o1_mf_s_757164997_72m9rqw3_.bkp';
Starting restore at 03-AUG-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
output filename=/opt/oracle/oradata/LCRSDEV/control01.ctl
output filename=/opt/oracle/oradata/LCRSDEV/control02.ctl
output filename=/opt/oracle/oradata/LCRSDEV/control03.ctl
Finished restore at 03-AUG-11
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
RMAN> list incarnation of database;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 LCRSDEV 756543625 PARENT 1 22-OCT-05
2 2 LCRSDEV 756543625 PARENT 525876 20-JAN-11
3 3 LCRSDEV 756543625 CURRENT 92348137 18-JUL-11
RMAN> restore database until scn 92348137;
Starting restore at 03-AUG-11
Starting implicit crosscheck backup at 03-AUG-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 1 objects
Finished implicit crosscheck backup at 03-AUG-11
Starting implicit crosscheck copy at 03-AUG-11
using channel ORA_DISK_1
Finished implicit crosscheck copy at 03-AUG-11
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_01/o1_mf_1_1_73g3hn6o_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_01/o1_mf_1_2_73g3hnxq_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_01/o1_mf_1_1_73g0rts6_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_134_72v9gv4s_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_138_72v9p4b4_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_120_72v8wwg0_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_121_72v8x5ty_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_131_72v9cnrv_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_139_72v9q5ok_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_137_72v9n4t5_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_136_72v9l88q_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_123_72v8ytm8_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_132_72v9dcxd_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_124_72v8zkg0_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_128_72v96qm1_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_135_72v9jqmx_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_129_72v98q3r_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_125_72v91g3b_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_118_72v8v8r4_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_127_72v9626w_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_130_72v9bqtb_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_141_72vncy6g_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_122_72v8ycd4_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_126_72v94cns_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_133_72v9fb17_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_140_72vn6wgo_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_119_72v8v9hf_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73j3wo01_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_2_73josgf1_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73jr20qc_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_2_73jh223h_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73josflf_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73jvqdqs_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_3_73josh91_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73j91rh9_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_91_72mqlnx9_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_111_72mrdr5m_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_96_72mqx958_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_114_72mrgsf9_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_94_72mqs6gj_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_102_72mr3893_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_99_72mr2h6c_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_104_72mr5hfm_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_109_72mrc83z_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_98_72mr080w_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_93_72mqq36m_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_97_72mqz0mm_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_116_72mrk268_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_101_72mr31yv_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_110_72mrddhg_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_95_72mqv3hp_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_105_72mr5vq4_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_115_72mrjd2s_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_106_72mr7hnt_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_100_72mr2qfc_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_112_72mrfc5j_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_107_72mr909t_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_103_72mr4pol_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_113_72mrfsb9_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_117_72mrl5mf_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_108_72mrb13l_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_90_72ml85v3_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_92_72mqnxz1_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_26/o1_mf_1_143_72y6ww71_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_26/o1_mf_1_144_72ybybps_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_26/o1_mf_1_142_72xt10j7_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_26/o1_mf_1_145_72yccy5z_.arc
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_01/o1_mf_s_758043324_73g3jfxx_.bkp
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_01/o1_mf_s_758035850_73fw6vrc_.bkp
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758133684_73jvr5px_.bkp
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758127608_73jot9x0_.bkp
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758109276_73j3xfom_.bkp
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758129928_73jr2s7p_.bkp
File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_07_22/o1_mf_s_757164997_72m9rqw3_.bkp
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 08/03/2011 12:53:19
RMAN-20208: UNTIL CHANGE is before RESETLOGS change
Edited by: K Doyle on Aug 3, 2011 10:22 AM

How can I recover files from a hard disk that I erased using the Erase Disk command in Disk Utility?

Thanks for your help!

Kappy wrote:
True but a DVD is a lot less expensive than the cost of commercial recovery software. TestDisk is also free but it is a set of Terminal programs.
Yes, it's not for GUI only using folks.
Free Linux alternatives are awkward. First, you have to download a Linux ISO and burn it to a DVD. Then boot the live demo and install Linux. That requires first partitioning the hard drive. And, on and on. It's nice if you already have a Linux installed.
Linux doesn't have to be installed. It can be loaded into RAM for the duration of the recovery.
Even if PartedMagic can be downloaded with a bootable Linux system it must still be burned to a DVD.
Any computer can be used to burn the ISO to disk, which makes it attractive in that regard.
Once PM is burned and booted off of it's loaded into RAM and flushed upon a reboot.
But the data recovery software in PM requires familiarity of the command line. That's it's drawback unfortunately.
However one can transfer files that were not deleted using this method.
...using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
Those "bootable cd's" of Data Rescue, File Salvage, and TechTool are probablly using Linux as it's a free OS.
Apple won't allow their OS to be used, Microsoft charges a huge license fee. So that only leaves Linux.
The user likely won't know that they are using Linux when using the bootable recovery disk, all they see is the recovery GUI.
Data Rescue is likely best downloaded, installed and run from a familiar OS X installed on a new HFS+ formatted external drive, then option booted from.
This would be faster than waiting for bootable disks to arrive in the mails. One has to use a exteranl drive anyway larger than the drive being recovered to hold all the potential recovered data.

My mbpro would not start so re-installed (as instructed by the website) how do i recover files after i re-installed my OS? thank you.

my 13" mbpro would not start so i followed the instructions & turned out i needed to reinstall the OS. can i still recover my files after i erased & reinstalled? if yes, how do i do it? thanks.

If the system partition was erased, recovery of any files previously stored on it as identifiable entities is unlikely.
Keeping an external CarbonCopyClone of the startup disk (free download) gets you a bootable clone (with all applications installed) so you have a chance of cloning back onto the internal disk if you ever need to reformat the partition again.

Is it possible to recover files after reinstalling my whole Mac OS X?

I recently reinstalled my whole Mac OS X in my new iMac. But I realized I forgot to backup some files (my Pictures folder!).
Is there a way I can recover those files? When I reinstalled the software (using the DVD's the iMac came with) I used the option erase and install (I don't remember exactly what it said but it was the complete reinstallation option.
Thank you.

It could be - remember that a folder is really just a special kind of file. The files within it are just additional files, linked to it as contents in the file allocation table. And all of them are not necessarily kept as a discreet contiguous chunk of data on the hard disc. So yes, it is possible that the folder itself is fine, but the files within it are not.
Or, as mentioned, it could be something else, like permissions, or a corrupted iPhoto database, or who knows?
Did you look at the DR3 FAQ? Does it make any sense to you, given whatever was displayed while the recovery software was running?
DR3 online FAQ entry:
I recovered files, but they won’t open. What’s wrong?
The answer to this question depends on whether you’re talking about files recovered from under the “CBR” folder, or other ones.
Files recovered by catalog (i.e. Not from the CBR folder)
It's normal for a small percentage of recovered files to be bad. But if you have checked a number of them and none of them are good, then chances are that they were recovered with wrong ABL setting. Pick out a few files to use as test files, and go back and select a different ABL choice (Expert>Allocation Blocks Layout..menu) and recover and test those few. If you find an ABL setting that gives good results on those files, re-do your big recovery with that setting. For more information, read the material on Allocation Block Layout in section 8.2.1 of the Data Rescue 3 Users Guide.
Files recovered by content (i.e. from the CBR folder)
It's also normal for a small percentage of these files to be bad. If the original file was fragmented (not stored on disk in consecutive blocks), then it can not be properly recovered by content. In most normal situations, most files on a user's disk will not be fragmented. Typical fragmentation rates for files tend to be just a few percent.
Note: The ABL setting plays No role in recovering files under the CBR folder.

[SOLVED] recover files after accidental formatting of zfs

Ok, Let it the 'you are an idiot' comments roll...
Long version:
I wanted to play with zfs, so I was installing freebsd alongside my typical arch installation. During the installation, I was astonished to realize that I must have been confused by the BSD drive naming convention because I had overwritten my data partition with zfs. Of course (I am an idiot) and I had no backup.
short version:
Used to have an ext4 partition that had some files on it. Now I have a zfs partition that has no files on it.
I did not do ANYTHING after I realized the mistake. I didn't even finish the installation. To the best of my knowledge, it has never even been mounted.
What utilities give me the best chance of recovery? Is there anything specific I should know about this specific situation, recovering a journeled file system out of zfs?
Last edited by cory.schwartz (2011-03-15 16:14:48)

Turns out that TestDisk was IS in fact capable of recovering lost partitions after they have been deleted, or sometimes reformatted. According to their wiki, they do not support ZFS filesystem, so I decided to try it in hopes that it would still recover TO a zfs partition.
And, I happen to have a copy of TestDisk handy on my Parted Magic CD.
Steps taken:
-From the main menu on Test disk, Select advanced.
-Select analyze partition data.
-This correctly identified my old linux partitions, and they were marked with a D which means they were 'deleted'. I don't know if it is completely right, because I never bothered to write down the specific Hard Drive geometry before, but it looks right to me.
-hit 'Write' to write the corrected partition table to disk.
-I was able to see recovered files through the testdisk program, but I'll have to reboot for the kernel become aware of the partitions and let me mount them. So I'll be back in 5 minutes to report whether this worked.

Recovering Windows 7 with recovery disks (4)

I had a crash and re-installed Windows Vista HP, but have an upgrade that once contained a Windows 7 Pro upgrade but the packet but is empty. But I do have (4) recovery disks marked Win7Pro and attempted to use these disks to recover Win7 but stopped to loading process because the program indicated that all files would be lost. Can someone help me install these disks and recover Win7? Again, this laptop arrived with an empty packet that once contained Win7Pro; I have a product key number.
This Toshiba P500 laptop arrived with the Windows 7 upgrade offer. The upgrade was ordered but the disk was never received.
Thank you for your help.
James

I'm a little confused. It sounds like you have a few things happening here.
Just to be clear, you'll always want to restore the laptop to factory default conditions using a recovery partition or recovery media and then upgrade to your desired operating system version. Don't install directly to a different OS. Also, doing the recovery procedure will erase all your personal data.
If you ordered something from Toshiba and didn't receive it or received the wrong product, you should definitely call the place of order and let them know!
- Peter

Replaced hard drive cant run recovery disks

I recently replace the hard drive on my pavilion model# g6-1d46dx. I purchased recovery discs from hp but when I try to run them after windows tries to open I get a disc no found error Any Ideas??

Hi:
You have to boot from disk 1 of the recovery disk set.
Please see this guide for assistance...read the Recovery From Recovery Disks section.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&jumpid=reg_r1002_us...

Bootmgr missining after using recovery disks

I bought my laptop a dv7-4278nr a few months back, it was a month old when I got it. The day after I got it, the hard drive failed, so I was sent a new one, with the recovery disks. Once I go through recovery, and I put the 4th disk, the application and driver recovery DvD it takes like 1 minute, before it pops out. Then shuts off computer even though it says it will restart. I turn it bac on click finish, and restarts. It does boot mgr is missing. I downloaded a Windows 7 copy and made an iso of it, but when I go to download drivers on the hp website, most of the programs don't wor at all. Any help is greatly appreciated.

Create a Windows 7 Recovery CD. Download the ISO below.
Windows 7 64bit
Use an app such as ImgBurn to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to cd is Here. Once created, boot from it.
Select the Repair option.
Select "Command Prompt" and type in the following command.
Bootrec.exe /REBUILDBCD
If the command is successful, close the Command Prompt window.
Click “Startup Repair” to perform Windows Startup Repair. After doing these computer will reboot automatically.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

After installing recovery disks

I followed instructions to restore after hard drive crashed, but after the whole process is finished and I just geta teal screen w a cmd prompt what am I doing wrong.

Hi dsibgh3,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see you are having some problems with your notebook after doing a recovery. I would be happy to assist you however you didn't provide enough information. I will need to know what operating system you are attempting to restore. How did you do the restore; recovery disks or using HP Recovery Manager? What is the product number for your notebook? Did you get any error messages at all? What comes up with the command prompt?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Auto_annotation data commented in .ldt file after running fndload download

Hi guys,
After running fndload to download conc program .ldt file created 'afcpprog.lct 115.40' is having auto_annotation code in '/*..*/' that is commented code,contains parameters list inside,I think due to that when .ldt file uploaded it doesn't copy parameters with conc program, can you please suggest solution for this.
BEGIN PROGRAM 'GEONTEUPROFINVXML' 'GEMSONT'...rnSRS_FLEX = 'GEMSONT' '$SRS$.GEONTEUPROFINVXML'rn AUTO_ANNOTATION =rn '/**nrn * @param org_id org_idnrn * @rep:paraminfo {@rep:type OE: Number Zero Precision} {@rep:displayed N} {@rep:required}nrn------* @rep:paraminfo {@rep:type 100 Characters} {@rep:displayed Y}nrn */'....end programrnrnrncan you pl suggest solution for this
Thanks,
varun

Hi guys,
After running fndload to download conc program .ldt file created 'afcpprog.lct 115.40' is having auto_annotation code in '/*..*/' that is commented code,contains parameters list inside,I think due to that when .ldt file uploaded it doesn't copy parameters with conc program, can you please suggest solution for this.
BEGIN PROGRAM 'GEONTEUPROFINVXML' 'GEMSONT'...rnSRS_FLEX = 'GEMSONT' '$SRS$.GEONTEUPROFINVXML'rn AUTO_ANNOTATION =rn '/**nrn * @param org_id org_idnrn * @rep:paraminfo {@rep:type OE: Number Zero Precision} {@rep:displayed N} {@rep:required}nrn------* @rep:paraminfo {@rep:type 100 Characters} {@rep:displayed Y}nrn */'....end programrnrnrncan you pl suggest solution for this
Thanks,
varun

Boot Camp will not work after installing recovery disk

I purchased a refurbished Macbook Pro 2012. I went ahead and installed dual ssds and used the Mac OS X recovery disk from USB flash drive. I wanted to install WIndows 7 through bootcamp. Bootcamp will not start after selecting continue. I'm not sure if boot camp is corrupted or something I did wrong.

Well you'll need to see if that remote app has an update or if it is compatible with IOS 7.
since you didn't state which remote app your using.

Recover files after run recovery disk

Similar Messages

Maybe you are looking for