Recover files

i want to recover some files from my MacBook via iCloud, how can i do that?
whats happen if i sign out from my iCloud ID on this MacBook? will i lose my Doc.?

my file is PDF Doc.

Similar Messages

  • How do i Secure & recover file from shared folder

    Hi All,
    I have Windows server 2008 R2 environment and one shared folder created on this with restricted permission by file sharing & security, now 1. I want to add one more restriction that owner of the folder should not able to delete that file? If this is
    not available with Microsoft then
    2. How do i recover file which deleted from MAP drive...
    Please help me to resolve this issue...
    Kalpesh Chauhan

    As to your first problem, I am not so familiar. But, as to the second problem, I think I can help.
    In fact, I have ever also accidentally deleted my hard drive files. In order to re-access them, I have also posted my question in forums, just like you. Fortunately, after browsing many related answers and threads, I just know that a third
    party data recovery program can be a good chance to go on.
    So, I follow some instructions in these forums and select three drive recovery freeware to go on, including Recuva, iCare Data Recovery Free and TestDisk and so on.
    Finally, I have restored all my needed data back successfully with these freeware.
    So, I hope it will also help you out.
    PS: Never forget to back up everything important on different hard drives or places in case of any similar data recovery problems in the future.

  • Is there any way to recover files on a corrupted drive if I can book to Lion Recovery Assistant?

    Is there anyway to recover files from a corrupted drive if I can boot to the on-disk Lion Recovery Assistant?  Unfortunately Apple replaced my screen in December and wiped my hard drive.  I restored my files from Time Machine but have not done a backup since December because Time Machine sees the computer as new.  I started trying to find a way to reconnect to the existing backup with hopes of not having to do a full back up all over again.  There are a number of files that I need from the last 2 months.
    My mid-2009 17" MacBook Pro froze last night and I had to press the power button to turn it off.  When the computer restarted, it boot into Lion Recovery Assistant.  Disk Utility reported errors like "invalid b-tree node size" and "invalid record count". 
    - I restarted and ran fsck overnight.  This morning I looked at the computer and it said that the drive could not be repaired.
    - Genius Bar did a quick scan and said I needed a new hard drive. 
    - I called Apple Care and they had me start in Lion Recovery Assistant and run Disk Utility.  Disk Utility again reported that the drive cannot be repaired. 
    - I tried using target disk mode and connected the MacBook to my iMac.  The iMac can see the drive in Disk Utility but cannot mount it.
    - I tried DiskWarrior from the iMac and it cannot rebuild the drive.  It does not even attempt.
    - I tried the demo of Data Rescue and it could not read the drive (using target disk mode).
    I realized that if I can boot the computer to the Lion Recovery Assistant then the drive is still functional (corrupted but still functional). Disk Utility shows the custom name I assigned to the partition (I changed it from Macintosh HD).
    Any suggestions?

    I was finally able to recover my data using DiskWarrior!
    After taking my laptop to a data recovery company and quoted $449 to recover my data, I decided to try one more time.  The technician did a free diagnosis and said the drive was still functional. I explained everything that I tried.  He said that they normally use Data Rescue and recommended that I wait a few minutes after starting the application before attempting to scan.
    Using another computer, I installed Lion to a 16GB flash drive and installed DiskWarrior, Data Rescue, and Remo Recover.  Remo Recover ran the day before for more than 24 hours and although it "saw" the data, the it only presented a fraction of the data I needed. I booted my laptop from the flash drive and first tried Data Rescue Demo.  It estimated 3500 hours to scan a 500GB drive. That worked out to be about 145 days.  I cancelled and tried DiskWarrior hoping that since I had purchased it, I would get some value.  This time DiskWarror did the scan and in less than 90 minutes it found pretty much everything!  It seems that it does not run properly with highly corrupted drives using target disk mode.  At the end of the scan, it mounted my internal drive so that I could preview the rebuilt directories and copy what I needed to an external drive!

  • What is happening when recovered files show up in my trash everyday.  These files are recovered from my Iweb.

    What is heppening when folder entitled "Recovered Files" show up in my trash daily for the last 3 days?
    They are apparently recovered art thumbnails from my I web.

    Annoying, but nothing to worry about.
    Sometimes the OS just tries to rescue files you've trashed.
    It will happen almost every time if they were built-in templates (but the Application will replace them anyway)
    Just empty the trash.

  • HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

    Hi,
    I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
    So basically here are my 2 questions:
    How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
    How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
    Any solutions are very much apreciated!
    Thanks!
    I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
    And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

    WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
    http://www.twocanoes.com/
    Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
    During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
    http://www.paragon-software.com/downloads/demo.html
    I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
    OS X
    Windows
    Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
    https://support.apple.com/kb/HT1427
    https://support.apple.com/kb/HT1553
    There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
    AppleHFS - the abilty to mount and read HFS volumes can be notorious.
    I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

  • Odd recovered files in trash

    Not sure if I should post this here or in the MBP forum...
    On bootup a couple of days ago, I found another "recovered files" folder in the trash on my MBP; I usually look at the contents and simply empty the trash, but when I checked it this time, it had a strange sub folder "tempfolder aaa" which contains the following:
    DPLib, IMLLib, MacromediaRuntime Lib, ProjLib (all shared libraries) and a folder "xtras" with:
    Animated GIF Asset, Buddy API OSX Xtra, Font Asset PPC, Font Xtra PPC, TextAsset PPC, and TextXtra PPC (all Final Cut Express plugin files, version 9.0 Director MX).
    I've since done a search on all of these, but can't find anything. The one thing they all seem to have in common is the "version 9.0 Director MX". I do have FCE installed, but have not used it at all. The only thing I did at the time these files apparently went into the trash was to uninstall my Epson printer because I purchased a new one. I uninstalled the same printer on my iMac and did not get any of these strange files in the trash.
    I'm hesitant to empty the trash because they are all libraries and some are FCE plugins. The MBP seems to be working fine, but I haven't had a need to really use any application in the last few days.
    Any helpful suggestions are much appreciated!

    Hi Barbara,
    This from the Apple Help Viewer.
    *If Trash contains “Recovered Files”*
    One or more Recovered Files folders may appear in your Trash after restarting your computer.
    The recovered files are temporary files used by Mac OS X applications. Usually temporary files are deleted by an application when it no longer needs them. If an application quits unexpectedly, the temporary files may not be deleted by the application. When you restart your computer, Mac OS X moves these temporary files to the Trash.
    You can retrieve useful files by dragging them out of the Trash. In most cases, however, the temporary files are not important and it is safe to empty your Trash. Check with the manufacturer of the application if you are not sure.
    Carolyn

  • Recovering Files in Trash with Time Machine?

    Hey guys,
    So I have some files that I desperately need to recover that I put in my trash a while ago. I am certain they were still in there when I recently backed up my Macbook Pro to Time Machine, but then a week later I accidentally emptied the trash, forgetting I'd left valuable files in there.
    I've since tried to search through my time machine backup, but however cannot find a folder that contains the files anywhere. I tried making hidden files, but still can't find a folder that would contain the files that were in my trash.
    Is there any way to recover files that were in the trash in a time machine backup?
    Further details (may not all be necessary, just in case):
    Computer: MacBook Pro (13-inch, mid 2012)
    OSX: Was running Mavericks at time of aforementioned events, now running Yosemite
    Type of Files Trying To Find: Videos
    Any suggestions?
    Thanks

    Time Machine doesn't back up the Trash. You would have to recover the files from wherever they were before you put them in the Trash.
    OS X Yosemite: Recover items using Time Machine and Spotlight

  • Recovered files in trash after sleeping

    Upgraded to Tiger 10.4.11 from Panther about 4 weeks ago using Erase & Install, then restoring apps, files, etc. with Migration Assistant from a clone. Flawless & painless--whew! However, I'm now having one minor but annoying issue--after playing Burning Monkey Solitaire, quitting, logging out & putting Mac to sleep, find recovered files in trash on next log in, specifically a couple of BMS text files. The Freeverse support folks are still working with me on this issue (suggesting doing a Secure Empty Trash, which didn't prevent the files from returning). I'm posting here, however, because today there was also an iPhoto folder (empty) in the Recovered files folder in the Trash. Any ideas on why this may be happening and how to stop it? I've used iPhoto since the OS upgrade without this occurring and, so far at least, no other apps (Word, Excel, other games, etc.) have been leaving orphan files on quit/sleep/logout that wind up recovered in the trash.
    As I said, it's a minor annoyance, but hope it's not a symptom of something more serious. Thanks!

    Thanks, but that's not quite what's happening here . . . first, neither Burning Monkey nor iPhoto unexpectedly quit--always were quit normally. Second, recovered files folder shows up after sleeping, not just after restarting.

  • Recovered files in trash

    Ever since I update to Yosemite 10.10.1 when I only shut my computer down and turn it back on in the morning there is a file that says recovered files in my trash do I need to delete these since they are in my trash? Also I notice sometimes around 600pm at night a folder pops up says Nov folder and select ok but then it on desktop i do not know what this is and just move to trash.I do not have a screen shot of this it only happens occasionally please let me know if anyone has these same issue since the update and what to do to fix them.
    Thank you

    The recovered items folder can be safely ignored: http://support.apple.com/kb/TA23371?viewlocale=en_US
    (Often these are cache files from Microsoft Office. If you indeed have this installed, the issue can be solved: see last post in this topic.)

  • Old unreadable hard drives - looking to recover files

    I have two old hard drives - both from my first iMac (Bondi Blue, purchased in early 1999). The first one "died" sometime in 2002 (blinking folder/question mark) so I replaced it with the second one. Eventually the second died the same death (both OS9).
    I moved on and have been with my G5 ever since (2005).
    I've kept the two drives in storage, hoping that someday data recovery at home would be a typical option. Ha.
    Last week, looking to fiddle with the old drives, I bought a slot-loading iMac CRT on craigslist for $25, no keyboard or mouse. It has a working hard drive with OSX installed. The keyboard/mouse from my G5 work fine on it.
    So I removed the hard drive and replaced it with each of my hard drives. Of course, same old story: each drive was unreadable (blinking folder/question mark).
    I don't have the original install discs (in fact I don't have any install discs).
    All I have is a Norton Utilities disc, which the computer will not start up from no matter which hard drive (including the working one) I have attached (I suspect that even though I press 'C', the newer keyboard takes longer to be recognized and is not readable upon startup). I also tried booting from the Norton CD using open firmware with no luck.
    Bottom line is:
    I have 2 "dead" hard drives (blinking folder/question mark):
    - Quantum Fireball EX 3.5 Series
    - Maxtor D540X-4K 3.5" Series
    and I have a slot-loading iMac (CRT) with no install discs and only my G5 keyboard/mouse to use it with.
    I've done a lot of research looking for any possible way of recovering files from these drives, but all information inevitably leads to "see a data recovery specialist'.
    I imagine I will get the same advice here, but I absolutely can't afford the upwards of $1,000 it could cost for that service.
    Am I out of luck completely? Should I put the drives back into storage until I can afford a recovery specialist?
    Thanks.

    Last week, looking to fiddle with the old drives, I bought a slot-loading iMac CRT on craigslist for $25, no keyboard or mouse. It has a working hard drive with OSX installed. The keyboard/mouse from my G5 work fine on it.
    So I removed the hard drive and replaced it with each of my hard drives. Of course, same old story: each drive was unreadable (blinking folder/question mark).
    I doubt this would boot. You do not have the drivers on your version of Mac OS to support newer hardware.
    All I have is a Norton Utilities disc, which the computer will not start up from no matter which hard drive (including the working one) I have attached (I suspect that even though I press 'C', the newer keyboard takes longer to be recognized and is not readable upon startup). I also tried booting from the Norton CD using open firmware with no luck.
    Lots of bad reports about Norton. They stopped updating the utility, so user beware.
    "Stellar Phoenix Macintosh - Mac data recovery software, recovers data from damaged, deleted, or corrupted volumes and even from initialized disks."
    They have a trial version, so I guess you can see if your data can be recovered...
    http://www.stellarinfo.com/mac-data-recovery.htm
    "Data Rescue II is the best data recovery software on the market for recovering files from a problem hard drive. Data Rescue II works when other tools fail. Data Rescue II is also completely safe to use since it does not attempt any risky repairs to the drive while its scanning."
    http://www.prosofteng.com/products/data_rescue.php
    FileSalvage is an extremely powerful Macintosh application for exploring and recovering deleted files from a drive or volume. FileSalvage is designed to restore files that have:
    * been accidentally deleted.
    * become unreadable due to media faults.
    * been stored on a drive before it was re-initialized/formatted.
    http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1

  • How can I recover files from an iPod Touch (4th gen) prior to a required restore?

    How can I recover files from an iPod Touch (4th gen) prior to a required restore?
    The iPod Touch was working perfectly fine.  iTunes suggest that I update the iPod Touch to the latest operating software, and I proceeded to do so.  Then a message popped up stating that the iPod Touch needs to be fully restored - and that all data will be lost.  The iPod Touch now displays the 'plug into iTunes' screen, and is stuck there.  There are irreplaceable family momentos on the iPod Touch.  How can I recover files from an iPod Touch prior to a required restore?  HELP...

    Your only hope is to contact a data recovery company. When it shows the connect to iTunes screen the iPod is essentially deleted.
    You can restore from an existing backup

  • How do I recover files from HP Connected Drive that no longer show up after a factory reset?

    I am trying to recover files that were once visible in HP Connected Drive, after completing a factory reset. The files that I need are no longer showing up. How can I get them back?

    Try using a data recovery product such as the ones listed here. Don't erase the drive or write anything else to it until the files are recovered or you choose not to recover them.
    (117246)

  • I lost a really important file (an iText Express document) randomly and then one day, a "recovered file" folder popped up and I assume it has to do with that, but the file just contains a doc with a bunch of coding. What do I do with that? HELP!!!

    As the title question states, I lost a really important file with iText Express. I've been using iText Express for a year or two now because it's just the one application I downloaded for writing and saving documents. I was working on one for a few months and randomly one day last month, when I went to open it to resume editing my work, the file was gone! I searched my whole laptop and trash. Then one day, a "Recovered Files" folder popped up in the area my file used to be, so I assumed that was the file I lost being recovered and I felt relieved. But when I opened the folder, the document inside was a "SoftwareMap" document with a bunch of coding written in it. I don't understand what I'm supposed to do with that or how it's going to help me recover my file?!? I lost SO much work!!! If anyone has ANY idea what to do, how this happened, or if the coding is supposed to help me recover my file, PLEASE help!!!

    No, I already tried looking at that. The file that recovered was not in the trash, it appeared in my documents folder. I opened it up and inside was an iText Express document with coding. Then inside of there, was and then and this "SoftwareMap" document contained a bunch of coding and symbols and words.

  • How to recover files from a deleted partition?

    Unfortunately, my OSX was not booting and I deleted my partition. Through the Internet Recovery mode I reinstalled the original OSX Mountain Lion it came with. I then upgraded to Maverick. I know that deleting a partition practically means all files are lost. I heard that files can be recovered on a Windows when a partition is deleted. Is there any way I can recover files from a partition that was deleted just a day ago?

    Hi,
    Yes, it is possible to recover deleted partition or volume on Mac. Previously I was able to recover all my data lost due to accidental deletion of partition on my Mac PC by using recover Mac data software. This tool is really helpful, here you can download this tool.

  • Irritating: Recovered Files Folder in Trash after every boot

    I have a clean installation of Snow Leopard on my 2009 iMac. The computer came with Leopard. But I gave uncle Steve $30 and got the Snow Leopard disc.
    I did a clean installation; did not use any time machine recovery or reuse any old data. Just CLEAN.
    Now, after each shut down and restart cycle, the Trash can has crumbled paper. This really bothers me. I thought Macs suppose to work correctly. I did not delete anything and nothing should be in that Trash. If OS deletes something, it should take care of it behind the curtain. I don't want to see trash in the Trash can.
    So I opened the Trash and see what's inside it. Every time, it is a folder called Recovered Files, and it has 0 bytes in it.
    I have no other software installed on the computer. All latest updates applied as of Mar 27.
    Any ideas?

    Exact same problem here as Alex and Bishboria.
    I'm always cleaning my Trash, whatever I reboot, shutdown or wake-up the computer from sleep mode, the previously empty trash get an empty "Recovered Files" folder...
    This happens since Snow Leopard upgrade. Subsequent versions of Snow 10.6.x didn't correct this behavior.
    Same wish than Alex: if the system is performing some auto-cleaning at each restart cycle, fine, I'm glad that the system takes care of itself and of my computer. But don't show me this empty folder... Let me handle MY trash! So that I know when I forget to empty it.
    It should goes to another post, but this "bug" belongs to the (long?) list of Snow's glitches: longer time to boot, slugishness response from internal harddrive. Should I go back to Leopard which was so responsive? The brand new full-64bits-Kernel isn't it supposed to be faster, stronger, more efficient than the 32bits one?!

  • Recovering files external hard drive

    Wasn't sure where to post this.  I haven't been on here for awhile, and I'm not used to the "new" structure.
    My 1TB LaCie external hard drive - which had my Time Machine backups on it (multiple ones unfortunately) no longer mounts.  I downloaded some file recovery software which can manage to find files, but not any file sorting information or names. 
    The first time I ran the software (it runs through Terminal), I let it go about 5.5 hours, and it had recovered approximately 1,100 folders worth of files, each folder holding 500 files (all named generically), and estimated that it had 66+ hours left to go.  Most of the files (around 30,000) were txt files which were useless garbage.  There were also many of the files I wanted (old photos & files from college), however, there is no chance I will ever have time to go through all the files it had at that point, let alone another 66+ hours worth.
    I started recovery over, this time setting limitations on file types (no more txt files), as well as other files I know I don't need.  Once again after the same amount of time, I'm in a similar situation.  Less files, but lots of random pngs and crap from websites I don't even remember. 
    As far as I can tell, a LOT of these files have many many versions.  I'm going to assume maybe from the multiple Time Machines?  There are photos from when I went to college that were classmates pictures, that I don't remember ever having saved to my computer.  There's what I can only imagine are cut up mangled files from the inner workings of Adobe CS3, and tons of crap from what I imagine must be old internet caching.
    Anyway, I'm not sure what my question is, but I'm mostly wondering if anyone else has had a hard drive with their "Time Machine" backups on it fail.  And if so, any advice for sorting out the mess of many duplicated files?  Perhaps I would be better served to use different software...but this was free, and I already spent $92 on a new external hard drive to recover files to.  However, if someone knows of a decent recovery program that might save me a bit of time, I suppose it would be worth it.  It just seems most of them have no guarantees, and I don't want to shell out $100, just to be sitting in the same puddle of files.
    Thanks!

    Kappy wrote:
    In any case if you connect the drive to your computer, then open Disk Utility, does the drive appear on your Desktop? If not, does it appear in DU's device list in the sidebar?
    The new external hard drive appears in disc utility, but not the old external hard drive with which I'm having problems.
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    So, I guess you're saying that any of those you mention are better than Disc Warrior for my problem. Is that right?
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Okay, I have now disconnected the external hard drive. I hadn't realized that there was the possibility of overwriting files on the EXTERNAL hard drive.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.
    Okay, I'll do that, but what about just repairing the external hard drive? Isn't that possible? I mean, couldn't it be something like a loose connection? However, I have certainly noticed that hard drive repair is not mentioned nearly as much as data recovery. There must be a reason for that.

Maybe you are looking for

  • Automatic creation of AuC

    Hi We are going live in next month. We are on SAP ECC6.0 and FICO MM SD are only implemented. PS is not implemented, In one of my BBP document, it is suggested that "The internal order will be changed to investment order and AuC will get created auto

  • HT2490 My System preferences always opens in a small window now.

    Every time I open up system preferences it always opens in a little window.  All lf the text and the icons are all scrunched together.  I'm actually an IT person and have been doing this for years but for some reason I can find nothing on the interne

  • Itunes screen too small

    ok i just got a new ipod nano and i downloaded the new software. when i connect it and it shows up to say register your ipod its too small to see and i can't see it say register now just register later on the left side. what should i do?

  • Can XML publisher hold data source

    Hi XML guru's, I understand that, XML publisher holds templates. Which are used to create XML reports. Could anyone let me know, whether XML server can able to hold data source like stored procedures etc. So it can fetch data with in the XML publishe

  • Using a BitmapImage in a mobile skin

    Hello, Is there a way to use a BitmapImage as a skin part in a mobile skin? Since it does not inherit from DisplayObject, I cannot add it using the addChild method in the skin. I tried the following: override protected function createChildren():void