Recover mails from Exchange 2010 EDB File

Hi,
We had a issue with our Exchange 2010 and had to restore to a different server.
There Is some mails that went missing.
i Need to restore from another backup but cant drop the existing mailboxes.
So i was thinking of exporting mailboxes with issues to PST files and import on users outlook to sync or if i can merge the mailboxed with EDB file....
Exporting to pst would prob be safer...
Thanks

It is all documented on Technet. First hit on a Google search for Recovery Database Exchange 2010 takes you here:
http://technet.microsoft.com/en-us/library/dd876954.aspx
Simon.
Simon Butler, Exchange MVP
Blog |
Exchange Resources | In the UK?
Hire Me.

Similar Messages

Mail from Exchange 2010 mailbox - BCC to Hotmail addresses with blank To: field not hounoured

Hi
This feels related to a previous question
http://social.technet.microsoft.com/Forums/exchange/en-US/bec88844-79c1-4d17-bf73-9425842b22de/problem-sending-mail-with-bcc-and-without-to?forum=exchangesvrgenerallegacy but is slightly different - it just applies to Hotmail and related addresses (e.g.
hotmail.com, hotmail.co.uk, outlook.com, live.co.uk).
Sending from our Exchange 2010 to BCC addresses with blank To: field, the BCC is not being honoured, but just by Hotmail-related addresses. Any Hotmail-related recipient sent to in this fashion sees all their and other Hotmail-related addresses in the To:
field. But any other addresses to other mail hosts (gmail, yahoo etc) in the same BCC list aren't shown, and recipients at the other mail hosts have a fully hidden BCC list (i.e. see no To addresses at all).
If the To: field has an address then there is no problem - all BCC addresses are hidden for all recipients as expected.
It feels like it is the way the header is being handled by the Hotmail MTAs. But I only see this behaviour from our Exchange 2010 servers (including test servers).
Below are message headers from examples - anyone any ideas on this?
Thanks,
Gordon
Headers from the same message sent as a BCC to a "@live.co.uk" address and "@gmail.com" address with no To: field, and below that a header of similar with a To: field.
First message, sent from [email protected] (gets translated to
[email protected]) BCCd to
[email protected] and [email protected] with no To: address.
Seen in mailbox of [email protected] (note the "to:" field at the bottom - this is what is being shown in the UI):
x-store-info:J++/JTCzmObr++wNraA4Pa4f5Xd6uensaUSop/gUCq9urBwwSF/6FOwwl1Py7H+wW1z5lc55JnUJDXNvxmGUxkw/bnnWJePWYXWzuS5Ywv2HQzl2GD+3A6SoaKpjD5JlShFHg3JE6so=
Authentication-Results: hotmail.com; spf=pass (sender IP is 143.52.X.XX)
[email protected]; dkim=none header.d=shu.ac.uk; x-hmca=pass
[email protected]
X-SID-PRA: [email protected]
X-AUTH-Result: PASS
X-SID-Result: PASS
X-Message-Status: n:n
X-Message-Delivery: Vj0xLjE7dXM9MDtsPTE7YT0xO0Q9MTtHRD0xO1NDTD0w
X-Message-Info: NhFq/7gR1vQRHV6jbdvQfibhgw1iwvrSqdhXuaSscqGalY1BHnH2KCdI+PRBKCQiYnAlF/zI6HIxnd9XTtPz9XHPDwg5mATFcpFtv9WV5ImszG0/OtQaSIg5iX4MbuVLCVo+t2VN/SyhCbwRod9LNPet1UXZtp+Oho5aLYTKlYQVRQ8OWRHqxMCUhgER4oHof+Be4v85/e3u59xr9Q2GEVPOpY/FDKse
Received: from MTA2.shu.ac.uk ([143.52.X.XX]) by SNT004-MC4F19.hotmail.com with Microsoft SMTPSVC(7.5.7601.22712);
Wed, 10 Sep 2014 03:56:32 -0700
Received: from MTA1 ([10.14.XXX.XXX])
by MTA2.shu.ac.uk with esmtp (Exim 4.76)
(envelope-from <[email protected]>)
id 1XRfZg-0004Kn-9C
for [email protected]; Wed, 10 Sep 2014 11:56:32 +0100
Received: from CAS1.shu.ac.uk ([10.14.XX.XX])
by MTA1 with esmtp (Exim 4.80.1)
(envelope-from <[email protected]>)
id 1XRfZg-0002cz-2q; Wed, 10 Sep 2014 11:56:32 +0100
Received: from MBX1.shu.ac.uk ([xxxx::xxxx:xxxx:xxxx:xxxx]) by
CAS1.shu.ac.uk ([xxxx::xxxx:10.14.XX.XX%12]) with mapi id
14.03.0174.001; Wed, 10 Sep 2014 11:56:29 +0100
From: "user1" <[email protected]>
Subject: RE: PLease ignore yet again! testing Bcc again - no "to" field
Thread-Topic: PLease ignore yet again! testing Bcc again - no "to" field
Thread-Index: Ac/M5d+WfHZZ5GLGRsCfXxvcxsjnbw==
Date: Wed, 10 Sep 2014 10:56:28 +0000
Message-ID: <[email protected]>
Accept-Language: en-GB, en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [10.14.XXX.XXX]
Content-Type: multipart/alternative;
boundary="_000_24BACA8040C3054487601DFC4087062C8C013974mbx1sh_"
MIME-Version: 1.0
to: [email protected]
Return-Path: [email protected]
X-OriginalArrivalTime: 10 Sep 2014 10:56:33.0151 (UTC) FILETIME=[E23190F0:01CFCCE5]
Seen in mailbox of [email protected]:
Delivered-To: [email protected]
Received: by 10.25.156.200 with SMTP id f191csp386624lfe;
        Wed, 10 Sep 2014 03:56:32 -0700 (PDT)
X-Received: by 10.194.200.137 with SMTP id js9mr48633666wjc.90.1410346592418;
        Wed, 10 Sep 2014 03:56:32 -0700 (PDT)
Return-Path: <[email protected]>
Received: from MTA1 (MTA1. [143.52.X.XXX])
        by mx.google.com with ESMTPS id cg3si20369633wjc.56.2014.09.10.03.56.32
        for <[email protected]>
        (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128);
        Wed, 10 Sep 2014 03:56:32 -0700 (PDT)
Received-SPF: pass (google.com: domain of [email protected] designates 143.52.X.XXX as permitted sender) client-ip=143.52.X.XXX;
Authentication-Results: mx.google.com;
       spf=pass (google.com: domain of
[email protected] designates 143.52.X.XXX as permitted sender)
[email protected]
Received: from CAS1.shu.ac.uk ([10.14.XX.XX])
by MTA1 with esmtp (Exim 4.80.1)
(envelope-from <[email protected]>)
id 1XRfZg-0002cz-2q; Wed, 10 Sep 2014 11:56:32 +0100
Received: from MBX1.shu.ac.uk ([xxxx::xxxx:xxxx:xxxx:xxxx]) by
CAS1.shu.ac.uk ([xxxx::xxxx:10.14.XX.XX%12]) with mapi id
14.03.0174.001; Wed, 10 Sep 2014 11:56:29 +0100
From: "user1" <[email protected]>
Subject: RE: PLease ignore yet again! testing Bcc again - no "to" field
Thread-Topic: PLease ignore yet again! testing Bcc again - no "to" field
Thread-Index: Ac/M5d+WfHZZ5GLGRsCfXxvcxsjnbw==
Date: Wed, 10 Sep 2014 10:56:28 +0000
Message-ID: <[email protected]>
Accept-Language: en-GB, en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [10.14.XXX.XXX]
Content-Type: multipart/alternative;
boundary="_000_24BACA8040C3054487601DFC4087062C8C013974mbx1sh_"
MIME-Version: 1.0
Similar message sent with [email protected] in To: field: from
[email protected]/[email protected] BCCd to
[email protected] and
[email protected] as seen in mailbox of [email protected]
x-store-info:J++/JTCzmObr++wNraA4Pa4f5Xd6uensaUSop/gUCq9v81cBAiz99O+8SxkfBVJ9NjbAXH8xe1rjvemR/ciBJT5MdkHvi8JYPj0vgDySrSfVnSG2OjgyyKNgjV2QF5PyGqXgRRVkQVM=
Authentication-Results: hotmail.com; spf=pass (sender IP is 143.52.X.XX)
[email protected]; dkim=none header.d=shu.ac.uk; x-hmca=pass
[email protected]
X-SID-PRA: [email protected]
X-AUTH-Result: PASS
X-SID-Result: PASS
X-Message-Status: n:n
X-Message-Delivery: Vj0xLjE7dXM9MDtsPTE7YT0xO0Q9MTtHRD0xO1NDTD0w
X-Message-Info: NhFq/7gR1vTvTqmPqDcS3ZKVZ4zJXdbe/WQhPCDn6U7TYJxfLAm+gALYf9z8EvjEIPauVTBwIF/uNFwreEfp3wgBZYYA8nUP8PFhNAMvRkDwCAnqdyWkFMZlNIQlCYkX84PJFTI7+qoRwxyIjAr2dfuXuj/qYYgN8IbRFD0FftK7d85hSKx/muFfL/1x713Efp1R2ztH/sUzvcxbXl+i8zHWvMqqF945
Received: from MTA2.shu.ac.uk ([143.52.X.XX]) by BAY004-MC6F14.hotmail.com with Microsoft SMTPSVC(7.5.7601.22712);
Wed, 10 Sep 2014 05:22:06 -0700
Received: from MTA1 ([10.14.XXX.XXX])
by MTA2.shu.ac.uk with esmtp (Exim 4.76)
(envelope-from <[email protected]>)
id 1XRguU-0006jA-4s
for [email protected]; Wed, 10 Sep 2014 13:22:06 +0100
Received: from CAS2.shu.ac.uk ([10.14.XX.XX])
by MTA1.shu.ac.uk with esmtp (Exim 4.80.1)
(envelope-from <[email protected]>)
id 1XRguU-0001YY-0a; Wed, 10 Sep 2014 13:22:06 +0100
Received: from MBX1.shu.ac.uk ([xxxx::xxxx:xxxx:xxxx:xxxx]) by
CAS2.shu.ac.uk ([xxxx::xxxx:10.14.XX.XX%15]) with mapi id
14.03.0174.001; Wed, 10 Sep 2014 13:22:00 +0100
From: "user1" <[email protected]>
Subject: test BCC - using own name in To
Thread-Topic: test BCC - using own name in To
Thread-Index: Ac/M8dJDWdvoIxoORH2RMAqNKM2m1w==
Date: Wed, 10 Sep 2014 12:22:00 +0000
Message-ID: <[email protected]>
Accept-Language: en-GB, en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [10.14.XXX.XXX]
Content-Type: multipart/alternative;
boundary="_000_24BACA8040C3054487601DFC4087062C8C013A65mbx1sh_"
MIME-Version: 1.0
To: [email protected]
Return-Path: [email protected]
X-OriginalArrivalTime: 10 Sep 2014 12:22:07.0005 (UTC) FILETIME=[D63584D0:01CFCCF1]

I'm guessing that they're using something other than Exchange for the MTA's. I don't recall seeing this in the "Received:" headers ever since Exchange stopped using the MS Windows SMTP service:
Microsoft SMTPSVC(7.5.7601.22712)
--- Rich Matheisen MCSE&I, Exchange MVP

Export Outlook E-mail From Exchange 2010

The easiest way would be to setup his/her profile on your computer and export the email.

I have a need to export e-mail from a user sent items. The search must return all e-mails sent every day between the hours of 17:00 and 06:30 (5:00 PM to 6:30 AM following day) to any recipient.
I need to export all the message into a PST file for review, how do I go about this?
This topic first appeared in the Spiceworks Community

Apple Mail can't send or receive messages from Exchange 2010, Mountain Lion

Over the last several weeks, I have been unable to send or recieve e-mails from Exchange 2010 in a corprate environment. I have deleted and re-added the account several times, and sometimes it will fix the issue. Other times it won't. I have also tried deleting the account, clearing the cache in ~/Library/Mail/V2/EWS*, and then re-adding the account. It resolves the issue temporarily, but then returns to not being able to sync. I've tested it with a number of other users accounts on the same Exchange system, and it's working as expected. OSX is version 10.8.4 with current patches as of 10/7/2013.
The connection doctor shows that the connection to EWS is green. The activity monitor looks like it's updating the folders properly on sync.
Here is the message I get in the logs in high volume when Console logging is turned on:
*** Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1508/Message/EWS/EWSConnection.m:555
Received an unexpected error: Error Domain=EWSExchangeWebServicesErrorDomain Code=277 "The operation couldn’t be completed. (EWSExchangeWebServicesErrorDomain error 277.)" UserInfo=0x7fd1c9a97e70 {EWSErrorMessage=The request failed schema validation., NSUnderlyingError=0x7fd1c85106f0 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -1000.)"}, response: (null)
          0   CoreMessage                         0x00007fff86a4a517 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 141
          1   CoreMessage                         0x00007fff86a4a388 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 215
          2   Message                             0x00007fff8daa5a8e -[EWSConnection sendMessage:forRequest:] + 762
          3   Message                             0x00007fff8daaeab3 -[EWSGateway sendMessage:forRequest:] + 69
          4   Message                             0x00007fff8dac543a -[EWSRequestOperation executeOperation] + 110
          5   CoreMessage                         0x00007fff86a65b80 -[MonitoredOperation main] + 219
          6   Foundation                          0x00007fff92475926 -[__NSOperationInternal start] + 684
          7   Foundation                          0x00007fff9247d0f1 __block_global_6 + 129
          8   libdispatch.dylib                   0x00007fff87f4af01 _dispatch_call_block_and_release + 15
          9   libdispatch.dylib                   0x00007fff87f470b6 _dispatch_client_callout + 8
          10 libdispatch.dylib                   0x00007fff87f481fa _dispatch_worker_thread2 + 304
          11 libsystem_c.dylib                   0x00007fff9068ad0b _pthread_wqthread + 404
          12 libsystem_c.dylib                   0x00007fff906751d1 start_wqthread + 13

Over the last several weeks, I have been unable to send or recieve e-mails from Exchange 2010 in a corprate environment. I have deleted and re-added the account several times, and sometimes it will fix the issue. Other times it won't. I have also tried deleting the account, clearing the cache in ~/Library/Mail/V2/EWS*, and then re-adding the account. It resolves the issue temporarily, but then returns to not being able to sync. I've tested it with a number of other users accounts on the same Exchange system, and it's working as expected. OSX is version 10.8.4 with current patches as of 10/7/2013.
The connection doctor shows that the connection to EWS is green. The activity monitor looks like it's updating the folders properly on sync.
Here is the message I get in the logs in high volume when Console logging is turned on:
*** Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1508/Message/EWS/EWSConnection.m:555
Received an unexpected error: Error Domain=EWSExchangeWebServicesErrorDomain Code=277 "The operation couldn’t be completed. (EWSExchangeWebServicesErrorDomain error 277.)" UserInfo=0x7fd1c9a97e70 {EWSErrorMessage=The request failed schema validation., NSUnderlyingError=0x7fd1c85106f0 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -1000.)"}, response: (null)
          0   CoreMessage                         0x00007fff86a4a517 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 141
          1   CoreMessage                         0x00007fff86a4a388 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 215
          2   Message                             0x00007fff8daa5a8e -[EWSConnection sendMessage:forRequest:] + 762
          3   Message                             0x00007fff8daaeab3 -[EWSGateway sendMessage:forRequest:] + 69
          4   Message                             0x00007fff8dac543a -[EWSRequestOperation executeOperation] + 110
          5   CoreMessage                         0x00007fff86a65b80 -[MonitoredOperation main] + 219
          6   Foundation                          0x00007fff92475926 -[__NSOperationInternal start] + 684
          7   Foundation                          0x00007fff9247d0f1 __block_global_6 + 129
          8   libdispatch.dylib                   0x00007fff87f4af01 _dispatch_call_block_and_release + 15
          9   libdispatch.dylib                   0x00007fff87f470b6 _dispatch_client_callout + 8
          10 libdispatch.dylib                   0x00007fff87f481fa _dispatch_worker_thread2 + 304
          11 libsystem_c.dylib                   0x00007fff9068ad0b _pthread_wqthread + 404
          12 libsystem_c.dylib                   0x00007fff906751d1 start_wqthread + 13

Send and receive from Exchange 2010

Hello,I have a doubt about sending and receiving mail from Exchange 2010. I have an Exchange 2010 organization, with antispam product between Exchange and Internet.I have a receive conector in my Exchange. In the Network tab, I have 0.0.0.0 255.255.255.255, and in the permission tabs, I have all checked (Anonymous, the 3 for Exchange and Partners).This way, I can send and receive all mail, from - to my organization. If I connect from outside and try to send mail without identification (telnet and try a dummy email address without any credentials), the antispam server blocks the rely. But if from inside the company I telnet the Exchange server, I can send mail from any non existing account, to any account inside my Exchange Organization.If I uncheck the Anonymous tick in the permission tab, I stop receive mail from outside.What have I...
This topic first appeared in the Spiceworks Community

Hi,
What’s the user impact? If the issue only occur on specific users, I suggest we firstly take the troubleshooting from the client side.
If the issue occurs to all the users, it’s seems the Outlook sync issue with the CAS server, not like a database issue. Do you configure the NLB for the CAS server?
Thanks,
Simon Wu
TechNet Community Support

Appointments from Exchange 2010 show as Mail in Mailbox

I have a very frustrating issue with a single user on one of our post offices. For reasons unknown appointments sent to the user from Exchange 2010 appear as mail items instead of appointments within the mailbox. Other users on the same post office do not get the same issue. I have tried resetting the user's views and a full client reset via maintenance. I have set the user's client settings to be the same as another user who does not get the issue without any luck either. Maintenance checks on the account does not flag any errors. I'm pretty certain I'm missing something very simple, but alas I can not think what.
Software wise we're running client 8.0.1 on post office agent version 8.0.2. We seem to get the same results regardless of the Client version of outlook, (we have tried the web version and 2003 and 2010 of the client). Anything else I could try would be greatly appreciated.
Kind Regards
Rob

In article <[email protected]>, Rob naylor
wrote:
> Software wise we're running client 8.0.1 on post office agent version
> 8.0.2.
>
How about updating those as they are a bit old.
Try looking at that user's account from another machine and from
WebAccess (if installed).
It is good to separate the PC from the user account as sometimes an odd
problem can be from some funky issue on the PC.
I'm not surprised that different versions of the Exchange 2010 client
doesn't make a difference as there is the formatting is set when
Exchange formats the outgoing to the internet.
A thought there, is your user setup as a contact on the Exchange
system, there have been settings in the past that caused invalid
formatting of internet messages. Something to the effect that 'this
user is on OutLook/Exchange vs regular internet standards'.
Has there been a single appointment sent from a user on that Exchange
system to two of your users?
Andy Konecny
Konecny Consulting Inc. in Toronto
"Give more than others think is wise
Challenge yourself beyond what others think is right"
Michael 'Pinball' Clemens

Error: Not able send mail from OWA 2010. When I send mail, the mails go to Drafts Folder.

Error: Not able to send mail from OWA 2010. When I send mail, the mails go to Drafts Folder. I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot: http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
Scenario: I have below configuration of exchange 2010 server Setup:
1. Windows Domain Controller with Global Catalog on Windows Server 2008 which only for Windows 2008 Server Native.
Server Name: WDC2010
Domain: Blazex.Com
2. Hub/Client Access Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Hub/Client Access Exchange role servers.
Server Name: HC2010.blazex.com (This is not a Addition Member server or ADC)
Role: Hub and Client Access Server.
3. Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
4. 2nd Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: 2MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
5. Client Windows 7: It is installed on Windows 7 Ultimate Workstation. As per Microsoft recommendation, I have just installed Windows 7 and then join this computer to Blazex.com.
Workstation Name: WIN7.blazex.com
Role: Workstation
Error Description: I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot (Same As Above): http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
I don't know what I am missing but I think there is some configuration I need to do on Hub/Client Access Server (HC2010). I tried to access the mailbox on XP Client system through OWA. I get the same problem as Win7.
Can someone please help me on this?
Thanks and Regards
Shambhu

Hi Subhash,
I have done the troubleshooting but I didn't find any problem at server side. I will send you mail also with all EXBPA report and as well DC, HC and Mailbox servers' Application Log and System Log.
Below are the questions's answers which was asked by you:
1.     Please check whether you can send email via Outlook.
I am not able to open the MS Outlook. Please check all details in this thread : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
2.     Please run EXBPA to have a health scan.
I have run the EXBPA and didn't see any critical Problem. I have took the screen shot and report. Please have a look in below screen shot link:
a. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/EXBPA.docx                                                                            - Final Report
b. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.BaseLine.200906270226501077.data.xml                        - Baseline Health Check
c. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Connectivity%20Test.200906270223318201.data.xml      - Connectivity Check
d. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Health%20Check.200906270125477730.data.xml            - Health Check with 2 Hr. Baseline option
e. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Permission%20Check.200906270224343377.data.xml      - Permission Report
The error which I received in EXBPA, that allready ignored by you and told that it is bug in EXBPA. Have a look here: http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/d4bb03bb-db84-4a8b-83ba-19937d7dcacf
3.     Please check application log, whether any error event logged there. They could come from ADAccess related error or etc.
I didn't see any ADAccess event on the server. For this I have left my lab PC open and I will check again.
4.     We find that if mail .que gets corrupt, then this issue will occur, please try to move the affected user to another store and then test the issue.
I am facing this problem with all users (7 users). Anyway I moved one user from one server Mailbox Database (2mbx2010) to Other Server Mailbox Database (mbx2010). After that
a) Rebooted the Workstation
b) Login successfully with same user.
c) Delete the Old MS Outlook Profile
d) Create New profile for same user without any problem.
e) Tried to login in MS Outlook and got the same error. : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
f) Open the OWA successfully for Same user.
g) Tried to send mail but again mail went to Drafts Folder.
5.     I noticed that you test the issue after you close outlook. I recommend you to reboot your pc and then access
mailbox via OWA to test the issue.
I tried you suggested option, but sorry it also couldn't help.
6. You also check your disk space.
     All Servers have Enough Disk Space. Check the EXBPA Report.
7. You may run EXTRA to get log information for further troubleshooting.
Need more time for this.
8. Please save application log, system log as *.evt file, then send them with EXTRA,EXBPA report to [email protected] .
   I have sent it as your mentioned mail address OR, you can get the mentioned log from below link also:
   a) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_APPLICATION.evtx           - DC/GC Application Log
   b) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_SYSTEMEVENT.evtx          - DC/GC System Log
   c) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_APPLICATION.evtx              - Hub/Client Application Log
   d) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_SYSTEM.evtx                      - Hub/Client System Log
   e) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_Application.evtx                - Mailbox Application Log
   f) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_System.evtx                      - Mailbox System Log
There will be some error log you will be that the system is not able to communicate with DC/DC, MBX or HC at everyday around 3 AM or some time 6 PM Evening also. These error came because I have installed VM on Windows 7 Workstation and after 45 min or one hrs. if I don't work on PC, then pc goes to sleep. so you may ignore these alerts.
I hope my answer will give you some clue and I expect more help from your side.
With Best Regards
Shambhu Sharma

How to import PST to Exchange 2007 from Exchange 2010

Hello everyone,
I have a problem with importing PSTs to Exchange 2007 mailboxes.
I exported PSTs without problem on Exchange 2010 using New-MailboxExportRequest but I run in several problems with importing PSTs on Exchange 2007.
I created VM with Windows XP, 32bit Exchange Management tools and Outlook 2007 because it's needed for importing/exporting in Ex2007 Envinroment. I created separate account for imporing PSTs, grant him rights to Exchange server and specific mailbox but I still
got this error while importing: Error occurred in the step: Approving object. An unknown error has occurred., error code: -2147219968 or sometimes import run without any error but no messages are imported (also it is processed very fast).
I use Import-Mailbox -identity <user> -PSTFolderPath <Path>
Do you know what causing this issue and how to fix it or how to import PST to Exchange using different aproach?
Thank you

Hi,
Please make sure that your account has proper permissions
Exchange Server Administrators role
Local Administrators group for the target server
Full access to the target mailbox
In addition. what’s size of that PST file? If it is too large, it might be corrupted and we may need to export it again from Exchange 2010.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Export Mailbox from Exchange 2010 and Import to Exchange 2007

Hello,
I exported mailbox (1GB in size) from Exchange 2010 to *.pst file; I need to import it into
Exchange 2007 mailbox. Is it supported ?
The operation completed successfully (no errors) but no items were imported; is it due to unsupported backward compatibility or some other issue ?
Thank you,
Luca
Disclaimer: This posting is provided AS IS with no warranties or guarantees, and confers no rights. Whenever you see a helpful reply, click on [Vote As Help] and click on [Mark As Answer] if a post answers your question.

I also have the same issue. Exported mailboxes on Exchange 2010 SP3 latest updates using
New-MailboxExportRequest and then tried to import into mailbox on Exchange 2007 SP3 with latest updates. The 32-bit client machine used for the import has Outlook 2010 SP1 (SP2 and later updates causes a different error). I used Outlook 2010 because the E2K10
New-MailboxExportRequest documentation states that you have to use Outlook 2010 or later. The PST files created can be opened and imported via Outlook but not with the
Import-Mailbox cmdlet (with no error as stated in this thread). Other PSTs, not created from E2K10 export do import just fine. I also ran ScanPST.exe against the exported PST and then ran the import again and it worked, everything got imported. Interestingly
the test mailbox PST file I was using was 761 KB but after the ScanPST it was 1,257 KB - must be some difference in the PST format that the Import-Mailbox cmdlet can't deal with.
Does anyone have any other solutions or
workarounds to this. I've got over 900 mailboxes I need this for due to an
acquisition? Has anyone tried using Outlook 2013 on the machine used for doing
the Exchange 2007 imports or does Outlook 2013 also have the same issue as later versions of Outlook 2010 (Exchange Mailbox import failed with error code 2147221233)?

OWA still lands at Exchange 2010 for users migrated from Exchange 2010 to 2013

I never had any issues with OWA redirection for a few users that I migrated from Exchange 2010-2013 initially. For users that I am migrating in the past few days, the OWA 2013 is landing on Exchange 2010 despite the mailbox being successfully migrated to
Exchange 2013.
Troubleshooting:
1. I have restarted the IIS Services
2. I have restarted MSExchangeOWAAppPool.
3. I have also checked the homeMDB attribute of the 2013 migrated user with the Exchange 2013 database.
I would really appreciate if anyone could share their experiences on similar issues.

I have checked it, the migration status is completed. In regard to the namespaces, both CAS 2010 and 2013 are set to mail.domain.com; CAS 2013 is the internet facing. I have also checked the internal access for OWA, it's the same scenario. Migrating them
back to 2010 and 2013 won't resolve the issue in my case, because the issue persists for every new user that I am migrating.
I recently found the following when I login with a user who is not effected and then logout:
1. Login in back with the affected user without closing the browser or clearing the cache, it lands at CAS 2013 OWA.
2. However, I get the below listed error message when I logout.
Your request couldn't be completed.
Click here to continue working.
This may have occurred for security reasons or because your session timed out.

Copy UM settings and prompts from Exchange 2010 to Exchange Online

When I migrated UM from Exchange 2007 to Exchange 2010, there is a script called "MigrateUMCustomPrompts.ps1"
that would copy over all the customized greeting files.
We are now migrating from Exchange 2010 to Exchange Online and will be using Exchange Online UM. Is there a similar script to copy over the files just like
the on-prem?

Sorry, I don't share code examples in most cases because they're generally one-off customer-specific scripts and I'm not in a position to answer lots of follow-up questions about them.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Comparing-the-differences-between-anti-spam-agents-from-exchange-2010-to-exchange-2013

http://social.technet.microsoft.com/wiki/contents/articles/23582.comparing-the-differences-between-antispam-agents-from-exchange-2010-to-exchange-2013.aspx
Sathish

Hello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Exchange 2013 - can no longer move mailboxes from Exchange 2010 to Ex 2013.

Migrating to Exchange 2013 from Exchange 2010. Created Ex 2013, moved some mailboxes OK. Then could no longer move mailboxes. No errors. The Migration email says complete. Synced: none, Total Mailboxes: none.
Tried several mailboxes. Same result.
Ex 2010 is SP3 RU6, (at least it says RU6 is installed in Programs/Features. The build is for SP3 w/o RU6???)
Ex 2013 is SP1 aka CU4.
How to proceed???
john11

After many attempts to fix the issue (move remaining 4 mailboxes from Exchange 2010 to Exchange 2013) I contacted Microsoft and we resolved the issue. Here's how.
btw - Thanks for the suggestions from Ed. However, they did not seem to move us forward.
What did work:
1. On the Exchange 2010 box, create a new database. (Someone else suggested this also). Then move the remaining Exchange 2010 mailboxes to this new db. Then after that, move the 4 mailboxes to Exchange 2013 using the GUI on Ex 2013. This only worked for one
of the four mailboxes. The other 3 failed.
2. Apparently, we need to restart the Microsoft Exchange Mailbox Replication service on the Exchange 2013 after several failed move attempts to clear cache related to the moves.
3. Then on the Exchange 2013 box, use this Exchange shell command:
New-MoveRequest -identity "[email protected]" -TargetDatabase "Exchange 2013 DB name" -BadItemLimit '500' -verbose
This moved the remaining 3 mailboxes including the Discovery mailbox. It took some time. But we could check the progress using
Get-MoveRequest
The MS Tech was terrific. Really knew his stuff. And all mailboxes are on Exchange 2013. Well, the last one is still moving, but I am optimistic.
Thanks for the suggestions. I had to get this done and the MS Tech made that happen.
john11

Cannot send mail from Exchange 2013 to Exchange 2007

I have an
Exchange 2007server with all roles in the same server (Version:
08.03.0327.001 ) on a Windows 2008 R2 server. I have now installed two Exchange 2013 servers both with CAS and MBX roles on Windows 2012 servers
(full patched). There is also a DAG between the new servers. All mail goes through a BorderWare besides the internal mail.
I can send mail from both environments to the Internet. I can also send internal mail from Exchange 2007 to Exchange 2013.But the problem is that I am unable to send from Exchange 2013 to Exchange 2007. I've debugged, but not solved the problem and there are
few articles on the Internet.
Any suggestions?

These two sentences are in conflict : "I can also send
internal mail
from Exchange
2007 to
Exchange 2013. But
the problem is
that I am unable
to send from Exchange
2007 to
Exchange 2013. "
Can you describe what is your real problem? Flow from E2007->E2013? Or vice versa?
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir

How many system mailboxes should be in exchange 2013 after moving from exchange 2010?

Hi, I am moving mailboxes from exchange 2010 to exchange 2013, I noticed that in exchange 2013, besides discovery search mailbox, there are other 5 system mailboxes.(especially, there are 2 x Microsoft Exchange system mailboxes) Please see the pic attached.
Does this look right? thanks

Looks perfectly fine - Why MS decided to name two of the five arbitration mailboxes the same (Microsoft Exchange) is unclear but it is what it is :)
In EMS:
Martina Miskovic

Recover mails from Exchange 2010 EDB File

Similar Messages

Maybe you are looking for