Recover Qrys when RSZDELETE is Used

Hi Gurus
When the transaction RSZDELETE is used, is there any possible way to recover the quiries back?
Thanks in advance.
Bkatechia

Hi Bhavesh.
The only possibilities you have are to transport the query from your dev. or QA system back to the production or visa versa. Else your basis can roll out a backup, but this is quite a big task and it might be a lot easier to recreate the query manually.
Hope it helps.
BR
Stefan

Similar Messages

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation it gives me an input/output error and stops. Any tips?

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation and after having selected both my destination and source drives, the operation begins but soon fails due to input/output error. If I try to create an image of the drive it gives me the same error message. Any help would be much appreciated.

Disk Utility only creates a image of the drive, so it's no help getting exactly what you want, which is your files. If the file structure is messed up or the drive is failing then it's no help.
If you have a external boot drive and you can't access the internal non-booting drive though the typical Finder and windows to transfer your files via drag and drop methods, then you need to install Data Rescue on the external boot drive and it will do as best as it can to recover your files. (works on non-encrypted/non-Filevaulted drives only)
.Create a data recovery/undelete external boot drive
Are you sure you have hard drive failure, or that OS X isn't merely not booting?
Because if the drive is working physically, then there is a host of fixes
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

Hi All, I'm using an Iphone 4. Last friday my iphone dead and not able to turn it on. I have tried to connect to itunes Home button power button it say's Iphone in DFU mode and asking to recover but when i click on restore it gives 1644 error. plz sugg

Hi All,
I'm using an iphone 4.Last friday my iphone dead and not able to turn it on. I have tried to connect to itunes +Home button + power button it say's Iphone in DFU mode and asking to recover but when i click on restore it gives 1644 error. plz sugguest.
my os version: 4.2
Firmware: 02.10.04

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

When remote database used in DB Link is down, JDBC hangs

Hello!
I have DB Link defined in my Oracle DB I work with from JSP application
which uses
Tomcat's connection pool. When remote DB is available, everything is
fine. But when
it goes down (I explicitly shut it down with "shutdown immediate"),
JDBC call hangs:
Statement Stmt1 = conn.createStatement();
rs = Stmt1.executeQuery("SELECT something FROM mytable@mylink");
Second line causes hang forever (or long enough for me to wait, more
that 30 minutes).
If I add this:
Stmt1.setQueryTimeout(5);
then it hangs for about 1min45sec, then throws exception "end of line
in communication
channel". Unfortunately, 1min45sec is too much to wait for the end
user. Also, it resets
my connection to my DB (not remote one), so it is no longer usable,
which costs me
something to recover.
It looks like the error occurs only when connection I use had
successful "history" of
being able to connect via DB Link. If I get connection not from
Tomcat's connection
pool, but force a new connection, everything works fine (something to
do with session
using DB Link).
Has anyone had similar problem? Is a workaround different from creating
a new
connection available?
Thanks!

Well, it appeared that this is nothing to do with Tomcat. The following sequence
of calls causes the same symptoms:
Statement stmt2 = cn.createStatement();
ResultSet rs2 = stmt2.executeQuery("select 'x' from dual@mylink");
rs2.next();
System.out.println(rs2.getString(1));
rs2.close();
stmt2.close();
// !!! do shutdown immediate to DB referenced by mylink, now
stmt2 = cn.createStatement();
rs2 = stmt2.executeQuery("select 'x' from dual@mylink"); // !!! hangs forever
rs2.next();
System.out.println(rs2.getString(1));
rs2.close();
stmt2.close();
If I would create a new connection for the second set of statements (before
second stmt2 = ...), it will not hang, and I will get correct error:
java.sql.SQLException: ORA-02068: following severe error from MYLINK
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Looks like something to do with Oracle JDBC driver?

Tab section keeps rising when I'm using touchpad on Satellite C70-B

When I'm using the touchpad, the Tab section keeps rising blocking a third of the screen. How do I disable this?

Guess what?
Its hard to believe that all this issues would be related to one general problem.
For example the described internet explorer issues sounds to me like a slow internet connection. Probably the internet browsers are not able to load all the video data (probably in HD resolution) and therefore the video start to play using lower resolution.
The touchpad supports some additional features which could be configured within the ELAN settings. (control panel -> mouse -> ELan settings in last tab)
If you dont use all the touchpad features, I would recommend you to disable the options in the Elan configuration menu.
Some issues sound also like the system would be locked for a short time.
Why? Im not quite sure about that but maybe some application run in the background and lock the system for a while.
Im wondering if you already tried to recover the notebook back to factory settings.
If not; try it out. Feedback would be appreciated.

I've uploaded Acrobat XI Pro and it freezes when I'm using it. I uninstalled and re-installed. When I login, it says that it is unable to validate the account and has an option to use the trial. How do I fix this?

I've uploaded Acrobat XI Pro and it freezes when I'm using it. I uninstalled and re-installed. When I login, it says that it is unable to validate the account and has an option to use the trial. How do I fix this?

This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

No PDF created when section break used and no data in XML group

I have this issue that Tim Dexter documented on a few years back...
http://blogs.oracle.com/xmlpublisher/output_formats/
"When you are using @section in your template for the commands, 'for-each' or 'for-each-group' (e.g. <?for-each@section: ...?>), then an empty/invalid PDF can be generated if XML data file has no data for that for-each loop."
This is my exact issue. Yet the instructions do not solve my problem completely. I add another section break at the end of my RTF and it gets the page to show...but I get an extra page at the end of all the populated xmls
Is there a way to supress this page?

Hi Jason,
I would like to see your template and data.
You have use @section and add condition to make the no-data page.

How do I put an external display to sleep when I am using my MacBook Air for presentation?

How do I put an external display to sleep when I am using my MacBook Air for presentation? I do not want to go to the projector just to turn it off and turn on again after a while? Is there a keyboard shortcut for that?

I want to be able to sleep the external display and at the same time do things in the MacBook.( This feature is useful for me so that I can prepare some things and so that my audience will not see what I am about to show them.)
Is there a feature for Mountain Lion?

When I am using the browser for a while and try to use ANY search bar and hit the "search" button it does a whopping NOTHING is there anyway of keeping this from happening?

Whenever I am using Firefox mobile - either regular, beta or aurora and go to search for something like through the Google search page and attempt to search for something the search bar does nothing and hitting the enter button instead doesn't do anything either. Is there a way to keep this from happening?

Hi and thanks to not leaving the firefox user alone.
Cor-el your answer is right as the madperson is and I already knew all these
answer and I said that before I don’t use any antivirus and I always turn off my firewall from the moment I installed my Windows.
I even turn off any automatic update for any of my software and I never let any unknown plugins or any thing like that be install without informing me. And if you know some things like Offline Storage and cookies must be to much more than usual and you have to clear them and delete them and I know so much more
And if you want to know it fixed now. But I don’t know how?
For understanding my problem read and research about Ixplorer.exe virus it is the same problem about the speed but the different is it doesn’t show any process in task manager like Ixplorer.exe virus
Bt I have done some things but still I don’t know that’s why it is fixed or not
First: I searched my system and removed any files have been crated on my system from two days ago since the problem happened.
And then I used to go about the article in this page and did like this:
http://answers.yahoo.com/question/index?qid=20080910101846AAazxN5
but still I don’t know any thing about the problem.
I can do so many things to fix but I am just curios if that is a virus why it just cut the speed when I am using the browser.
Please if any one found the reason send me your information I like to know it will improve my knowledge however my problem is solved fro now.

Problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN c

I met a problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN clients:
1. Background:
We have two WLAN: staff and student, both of them will use PEAP-MSCHAPv2, ACSE will be the Radius server, it will use Windows AD's user database. In AD, they create two groups: staff and student. The testing account for staff is staff1, the testing account for student is student1.
2. Problem:
If student1 try to associate to staff WLAN, since both staff and student WLAN using the same authentication method, the auth request will be send to AD user database, since student1 is a valid user account in AD, then it will pass the authentication, then it will join the staff WLAN. How to prevent this happen?
3. Potential solution and its limitation:
1) Use group mapping in ACSE(Dynamic VLAN Assignment with WLCs based on ACS to Active Directory Group Mapping), but ACS can only support group mapping for those groups that have no more than 500 users. But the student group will definitely exceed 500 users, how to solve it?
2) Use methods like âRestrict WLAN Access based on SSID with WLC and Cisco Secure ACSâ: Configure DNIS with ssid name in NAR of ACSE, but since DNIS/NAR is only configurable in ACSE, don't know if AD support it or not, is there any options in AD like DNIS/NAR in ACSE?
Thanks for any suggestions!

I think the documentation for ACS states:
ACS can only support group mapping for users who belong to 500 or fewer Windows groups
I read that as, If a user belongs to >500 Windows Group, ACS can't map it. The group can have over 500 users, its just those users can't belong to more than 500 groups.

Having a problem with commandButton attribute when i am using it under tabl

Having a problem with {color:#800000}commandButton {color}{color:#339966}attribute {color}when i am using it under{color:#ff0000} table{color}
I am using a command button under a table.
here is the example
<h:dataTable value="#{wlmHandler.plexes.plexes}" var="{color:#ff0000}onePlex{color}" border="0" cellspacing="0" cellpadding="0" width="100%" border="0">
<h:column>
<h:panelGrid border="0" cellpadding="0" cellspacing="0" columns="5">
<h:commandButton action="" styleClass="tixbutton" value="#{labels.ADD}" onclick="#{onePlex.tran}"/>
<f:verbatim> </f:verbatim>
<h:commandButton action="#{createTransaction.transactionCommand}" styleClass="tixbutton"
value="#{labels.SUBMIT}" actionListener="#{createTransaction.processAction}">
<f:attribute name="dbName" value="#{wlmHandler.dbName}"/>
<f:attribute name="plexName" value="{color:#ff9900}#{onePlex.name}"{color}/>
</h:commandButton>
</h:panelGrid>
<h:/column>
</h:dataTable >
when i am using this plex name atribute it is giving nullPointerException
{color:#ff9900}this value #{onePlex.name} i cant able to access inside the command button{color}

balu i have tried by seeing u r blog.
this is my structure of tables
plexes (if i iterate plexes table gives plex object)
|
------ plex (plex table gives transaction object)
|
------transactions(transactions table gives transaction table)
|
here i will have a command link to this link i have to pass the plex name which
will come from
i tried in this command action with HTMLDataTable getRowData()
i am not getting the selected row data .i am downcasting this getRowData() to plex.

TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem

Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.

PS CS5 Extended on Windows - When trying to use the clone stamp and/or healing brush as soon as I move the cursor over the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush. W

PS CS5 Extended on Windows
When trying to use the clone stamp and/or healing brush as soon as I move the cursor from the toolbar over to the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush. This just started tonight. What's causing this weird behaviour?

What are the settings in Window > Clone Source?

When I am using Premiere elements 13 I get a message that pops up "that there is no disk in the drive. Please insert a disk into drive", this also happened 3 months ago How can I get rid of this again?

When I am using Premiere Elements 13 I get a message that pops up "There is no disk in the drive" I click on it and it keeps coming back "very annoying", but about three months ago it happened to me and I was told to change the file name from OldFilm.AEX to OldFilm.AEXold. Well now the file is back in Folder OldFilm.AEX. Here is a screen shot the files are highlighted.What should I do now to correct this once and for all, or can I? Thank you for your time.

TomWolves
I would do another rename to disable or just delete all the OldFilm.AEX and OldFilm.AEXOLD in that NewBlue Folder.
If you do, please let me know if that OldFilm.AEX regenerates itself the next time you open Premiere Elements 13.
Here is the strange story...at least from my Premiere Elements 13 Windows perspective...never had the No Disc error issue
Here are some details to sort through trying to figure out why you have 2 OldFilm.AEX file in the NewBlue Folder.
1. The original OldFilm.AEX file of Premiere Elements 13 has the date of 9/4/2014 (just before the version was released on 9/24/2014).
After the 13.1 update is done (whenever date), that OldFilm.AEX file has the date of 1/31/2015. I first saw notification of the 13.1 Update
release early in February 2015.
2. Now in Premiere Elements 13.1, if I take my OldFilm.AEX (date 1/31/2015) and disable it by renaming it to OldFilm.AEXOLD, close out of there, and reopen
the program, the OldFilm.AEX is not seen to regenerate. The OldFilm.AEXOLD remains there as its lone self.
3. So, I am thinking that your OldFilm.AEXOLD in the screenshoot is "original equipment" that you disabled to get rid of No disc error.
Why the OldFilm.AEX is there also is not clear, but the dating on it suggests that it came along with the 13.1 Update.
Bottom line: let us try the deletion or disabling one more time and see what happens.
Looking forward to further reports on your findings, as your time permits.
Thanks.
ATR

Recover Qrys when RSZDELETE is Used

Similar Messages

Maybe you are looking for