Recover so
I have a Nomad Jukebox Zen Xtra with 40 GB. I accidentally dropped my MP3 player and it was freaking out on me, so it came up with a recovery screen and I think I pressed reload and I pressed format data. Is there any way I can get my music back or make it work again. I have tons of music that I lost and I really want it back.
The only way would be to take it to an expensi've recovery service, and then there's no 00% guarantee.
ALWAYS keep a backup of your player.
Similar Messages
-
i'm using windows 7 (64 bit) but experiment to install mac on my PC (i 5-4 GB ddr 3-500sata sea gate).by mistaken its format my whole hard drive which is 500 GB sea gate sata.after this i'm confused and install windows 8.1 and then again i had install windows
7 (64 bit) now after 2 time partition erased i'm trying to recover my data 50 percent data but which drive i had locked with windows 7 bit locker it cant recover any thing I've remember its password.
any one help me to get back my data from this locked drive ?
RB
If the drive was both formatted and bit locked you cannot recover your data.
Wanikiya and Dyami--Team Zigzag -
My emails go from outbox into I cloud recovered section. I have gmail too. how can I delete my icloud account and just use gmail? Speed test on wifi good.
Any ideas please.Sign out of iCloud (System Preferences>iCloud)
-
How can I recover my old account with a new one?
Hi, my hotmail account it was hacked, I can't have acces to my adobe account anymore.
How can I get acces to my old account with a new Adobe ID?
I'm already subscribed to creative cloud and I can't have acces to my account and upgrade my products.
what can I do?
ThanksThanks Romshina
I read the link you send me and thanks, but the thing is that I still can't get into my Adobe Id, because when I try they ask me to reset my password in an email they will send me to my old account and there is the problem, because I don't have acces to that old acount, [email protected]
now this is my new email, because the las one it was hacked and I just can't get back to it.
So I would like to have access to my account and update this new email account, to have acces to my CC account.
Thanks
Date: Fri, 27 Dec 2013 06:51:15 -0800
From: [email protected]
To: <Removed by Moderator>
Subject: Re: How can I recover my old account with a new one? How can I recover my old account with a new one?
Re: How can I recover my old account with a new one?
created by Romsinha in Adobe Creative Cloud - View the full discussion
Hi Guillermo Castellanos,
Please refer the knowledge base article: http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sig n-faq.html.
Regards,
Romit Sinha
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5959347#5959347
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: How can I recover my old account with a new one?
To unsubscribe from this thread, please visit the message page at Re: How can I recover my old account with a new one?. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
I have an older I-Phone (3G) that for some reason the body of the phone has split in two. This phone was a business phone and it had a lot of important information on it. I have a second phone that is also a 3G. On the broken phone there is a lot of important information that I need in my calendar. Im not worried about anything else but the calendar. I didn't have the Mobile Me account at that time or I would be having this problem. Does anybody know if I can ust switch out the sim cards. I just need to recover the old calendar, so im hoping that the calendar will transfer when I switch the sim card into the good 3G. If that doesn't work does anybody know of anyway that I can retrieve this information off of this phone?
Nothing is stored on the sim card on an iPhone. If you backed up to your computer the backup will contain your calendar events. Otherwise, if your phone isn't functioning there is no way to back up or extract your calendar at this point.
-
Recover a single file in Content Services
I've been asked to document how we would go about recovering a single file in Content Services. The Trash/Archive angle I'm clear on, but what about an extreme case. Lets say that someone created a file, trashed it, emptied the trash, and then it expired from the Archive before the user realized that they needed the file.
Is it possible, and if so how would one go about getting the file back assuming that there is a full db backup once a day?
Would enabling BFILE aging help? If so, how?
On a related note: If archive is set to expire content after 1 month, but BFILE aging is turned off, when does deleted content get purged from the Archive? It's not 1 month, as I have deleted files in the Archive going back to January.Archive expiration and BFile aging are orthogonal. BFile pushes the LOBs of documents that are in the archive to bfile. Archive expiration deletes files from the archive after the configured time. If this is not the behaviour you are seeing please file a TAR and they can help check whether your system is configured correctly or if you are running into a bug.
regards,
-sancho -
if the music that is on an iPod can no longer be accessed through iTunes because it was deleted, is there anyway to recover the music on the iPod if it wasn't purchased?
See this support article:
http://support.apple.com/kb/HT1848
You can also download at least some of your content (audiobooks being a notable exception) again from the iTunes Store:
http://support.apple.com/kb/ht2519
For additional instructions, particularly for content not purchased from the iTunes Store, check out this user tip from TuringTest:
https://discussions.apple.com/docs/DOC-3991
and this page on "How-to Geek":
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question. -
How do I recover files from an internal hard drive that is no longer recognized?
Hi there,
Any help on this problem is greatly appreciated! I have a MacBook Pro (late 2009) running Snow Leopard. Over the last few years, after having brought the computer in to get checked, it seems that the RAM cards have gotten loose (or the bottom cover of the computer gets loose) and occasionally a grey curtain will come down from the top of the screen and everything stops working. Restarting the computer is often fine but sometimes it can't be restarted and I have to take the cover off, reset the RAM cards in their slots, and retighten the cover. The computer usually works fine after that, but verifying the disk using Disk Utility will sometimes indicate there is an error and the disk needs to be repaired. Repairing it in Disk Utility is usually fine.
Last year this happened but the disk could not be repaired. The operating system could still be run, and after making a backup of all my files I reinstalled the operating system from the installation DVD, which didn't delete any of my files on the hard drive anyway.
A few days ago the same grey curtain issue happened, however upon resetting the RAM and back cover and restarting the computer, the apple logo appeared which was quickly replaced by a prohibitory sign, which stayed on the screen indefinitely. After putting in the installation DVD and trying to reinstall the operating system, when the option comes up to choose which disk to install OS X on, the internal hard drive does not appear as an option. Going to Disk Utility from the DVD, the internal hard drive appears on the left but the text is greyed out. Attempting to repair the disk gives the following error message:
Checking Journaled HFS Plus volume.
Invalid key length
Invalid record count
Catalog file entry not found for extent
The volume could not be verified completely.
Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
While I know I could completely erase and reformat the disk, I really don't want to lose any of my files (ideally). If I erase the disk but select "Don't Erase Data" from the "Security Options..." in the "Erase" tab in Disk Utility, will this keep all my files in tact and will I be able to access them later? Are there third party applications that can recover my files so I can make a back up before I delete and reformat the hard drive? I am currently running the computer through an external hard drive connected by USB, but the internal hard drive still doesn't show up in Finder (only in Disk Utility as greyed out text).
Can I recover my files?
Thanks so much!Try using a data recovery product such as the ones listed here. Don't erase the drive or write anything else to it until the files are recovered or you choose not to recover them.
(117246) -
The other day I tried to open a document on my Pages app on my iPad. I soon notice I could no longer see it anywhere is my documents. I opened my laptop and went to iCloud.com to search for it there. On iCloud.com I am able to see the document but I can not do anything with it. I tried downloading it to my computer as a pdf. file but it just says error and to try again. I was able to copy the document but it does not allow me to download the copied document either. Is there some way I can recover the document or a pervious version of the document?
How are you seeing your document on iCloud from your laptop? Web browser, or OS X Pages open dialog?
If you have MS Word or .pages formatted files parked on iCloud, the web interface will not permit their download as PDF, and in fact, PDF is an inactive option in that download menu for these word processing files. There is no copy facility available, but duplicate functionality exists from the iWork category within the iCloud web presence.
If you have Pages v4.2 or later installed on your (assumption: Mac) laptop, launch Pages and in the open file dialog, select iCloud on the dialog toolbar. Now, press and hold the option key as you drag and drop a copy of our document from iCloud to your desktop. The reverse works also.
See if you can open that document on your laptop now. -
Can't recover 3GS after IOS5 upgrade attempt - phone no longer seen in iTunes
Tried upgrade on 3GS to IOS5, got msg that iTunes detected phone in recovery mode and I must restore. iTunes no longer sees the phone so restore doesn't work. Win XP sees the phone driver when I connect the phone, and driver says it is working properly. Have went through the entire support topic "iPhone not appearing in iTunes" and found no problem. Rebooted computer 3 times and tried all USB ports - iTunes still doesn't see the phone. Any ideas on how to recover this phone?
my problem occurred when I upgraded to IOS5 on my iPhone 4. I received an unable to sync message that indicated that there was no space left on my iPhone; and a "Other" Capacity indicator appeared on the bottom of the iPhone device sync screen (in yellow color) and noted an overage of 12GB! Ofcourse, prior to the upgrade I actually had 6GB free on my 32GB iPhone. So, there is a bug. The following link indicates a few solutions and hopefully it will answer your concern. The link is http://support.apple.com/kb/TS1503
However, I had to restore as the first two solutions didn't work. Furthermore, about 3.3GB of "Other" remains while I synced up. Clearly, the problem has not been resolved. Apple owes me and you community members a patch to fix this bug. Basically, I have spent about two hours fixing this and I still cannot use 3.3GB of my iPhone space. -
How to recover ALOM Main Flash (ReFlash EPROM) ? -- ALOM stuck in a loop
Hello,
I had an issue while flashing the ALOM Main Flash of a Sun Fire v210.
Now the ALOM boot is stuck in a loop trying to load the main ALOM image.
As a result the ALOM Main Flash is broken but I can still access the
ALOM Boot Menu. I can also boot Solaris with the Jumper on FP2 or FP3
but it does not recognize the SC anymore.
Is there a way to recover it from Solaris and/or using the
"f - Wait for flash download from host" from ALOM boot menu ?
ERROR ON ALOM Boot
Failure: CRC Error - ReFlash EPROM.
Main Sectors FLASH CRC Test, FAILED.
ERROR ON "OK >"
ERROR: ERROR: Unable to open the SC device.
ERROR ON SOLARIS
WARNING: DP_GET_SDP_VERSION failed, ret=4
scadm: The SC hardware could not be initialized.
MORE INFO:
ALOM LOOP:
ALOM - POST run incomplete previously, no POST this time
ALOM BOOTMON v1.6.10
ALOM Build Release: 001
Reset register: f0000000 EHRS ESRS LLRS SWRS
Check for Handshake
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
ALOM - POST run incomplete previously, no POST this time
ALOM BOOTMON v1.6.10
ALOM Build Release: 001
Reset register: e8000000 EHRS ESRS LLRS CSRS
Check for Handshake
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
ALOM - POST run incomplete previously, no POST this time
JP2 1-2 IN ALOM Flash Recovery
JP3 1-2 IN ALOM Reset
JP12 1-2 IN ALOM Console Bypass
http://www.sunshack.org/data/sh/2.1.2/infoserver.central/data/syshbk/Devices/System_Board/SYSBD_SunFireV2x0_CPU.html
Executing Power On Self Test
0>
0>@(#)Sun Fire[TM] V210/V240,Netra[TM] 210/240 POST 4.30.4.a 2010/01/06 15:10
/export/delivery/delivery/4.30/4.30.4.a/post4.30.4-micro/Fiesta/enxs/integrated (root)
0>Copyright 2010 Sun Microsystems, Inc. All rights reserved
0>OBP->POST Call with %o0=00000800.01014000.
0>Test CPU Caches....Done
0>Functional CPU Tests....Done
0>IO-Bridge Tests....Done
0>INFO:
0> POST Passed all devices.
0>
0>POST: Return to OBP.
Configuring system memory & CPU(s)
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V210, No Keyboard
Copyright 2010 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.30.4.a, 8192 MB memory installed, Serial #********.
Ethernet address *:*:*:*:*:*, Host ID: ********.
Running diagnostic script obdiag/normal
Testing /pci@1e,600000/ide@d
Testing /pci@1e,600000/isa@7/rtc@0,70
Testing /pci@1c,600000/scsi@2
Testing /pci@1c,600000/scsi@2,1
Testing /pci@1e,600000/isa@7/serial@0,2e8
Testing /pci@1e,600000/isa@7/serial@0,3f8
ERROR: ERROR: Unable to open the SC device.
ERROR: ERROR: Unable to open the SC device.
Rebooting with command: boot
Boot device: disk File and args:
SunOS Release 5.10 Version Generic_141444-09 64-bit
Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
v210 console login:
WARNING: DP_GET_SDP_VERSION failed, ret=4
WARNING: DP_GET_SDP_VERSION failed, ret=4
v210:~# cd /usr/platform/`uname -i`/lib
v210:/usr/platform/SUNW,Sun-Fire-V210/lib# /usr/platform/`uname -i`/sbin/scadm
download boot alombootfw
scadm: The SC hardware could not be initialized.
LOM <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external and internal console serial ports baud rate
i - Set internal control serial port baud rate
t - Toggle 'OK' flag
R - Reset SC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: m
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
ALOM POST 1.0
- MENU MODE
Status = 00000020 I-Cache OFF Loop Mode OFF
System configured with a 50 MHz Clock
1 TTY External - Internal Loopback Test
2 TTYC - Internal Loopback Test
3 TTYD - Internal Loopback Test
4 TTY C to D - AFT Mode Loopback Test
5 TTY D to C - AFT Mode Loopback Test
6 Memory Data Lines Test
7 Memory Address Lines Test
8 Instruction CACHE Test
9 Data CACHE Test
A Memory Cells Test
B Boot Sector FLASH CRC Test
C Main Sectors FLASH CRC Test
E FULL_POST_TEST
X Exit to Main Menu
T Bring up the TOOLBOX Menu
Select a command by entering: 1 - E, X or T
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
1 TTY External - Internal Loopback Test
2 TTYC - Internal Loopback Test
3 TTYD - Internal Loopback Test
4 TTY C to D - AFT Mode Loopback Test
5 TTY D to C - AFT Mode Loopback Test
6 Memory Data Lines Test
7 Memory Address Lines Test
8 Instruction CACHE Test
9 Data CACHE Test
A Memory Cells Test
B Boot Sector FLASH CRC Test
C Main Sectors FLASH CRC Test
E FULL_POST_TEST
X Exit to Main Menu
T Bring up the TOOLBOX Menu
Select a command by entering: 1 - E, X or T
Main Sectors FLASH CRC Test
ALOM POST 1.0
- MENU MODE
Status = 00007fff I-Cache ON Loop Mode OFF
System configured with a 50 MHz Clock
ERROR: ALOM POST TEST
H/W under test = Flash Memory Data
Test name = FLASH CRC Test
Subtest name = Main Sector Flash Test
Failure: CRC Error - ReFlash EPROM.
EPROM CRC: 08d743fc Calced CRC: 26469a8f
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
ALOM <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external and internal console serial ports baud rate
i - Set internal control serial port baud rate
t - Toggle 'OK' flag
R - Reset SC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: d
OK. You're DOOMED!Anybody knows if the source code of scadm tool is available somewhere ? (opensolaris etc. ?)
I don't have any additional advice to offer other than asking that you to try the flash-update all over again,
one more time, as if it were the beginning again.Yes but how because the SC is not discovered anymore by Solaris :
"rmclomv: WARNING: DP_GET_SDP_VERSION failed, ret=4"
"The SC hardware could not be initialized."
Can you try to flash the mainalomfw ? Your log contained only the flash of the alombootfw !
/usr/platform/`uname -i`/sbin/scadm download alommainfw
I guess jumper JP2 allows to recover from a failed flash by selecting the un-touched half the PROM.It does not work as the SC is not responding anymore to Solaris
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
v210:~#
v210:~# cd /usr/platform/`uname -i`/lib/images
v210:/usr/platform/SUNW,Sun-Fire-V210/lib/images# /usr/platform/`uname -i`/sbin/scadm download alommainfw
scadm: The SC hardware could not be initialized.
v210:/usr/platform/SUNW,Sun-Fire-V210/lib/images#
ERROR: ERROR: Unable to open the SC device.
It's a pitty that obtaining OBP/ALOM updates requires a service contract. I got a V210 recently.
Unfortunately both OBP and ALOM are the intial release 4.8.2 / 1.0.I agree but it's probably also because you need support in case it fails ;-)
Thanks for your answers! -
Can i recover lost data from encrypted drive by Bitlocker
Hello Dears. I had encrypted my drive by Bitlocker in windows 7.
few days after my friend did quick format in my encrypted drive.
my 300 gb of data lost. and nothing saved
i remember unlock password.
how can i recover my data ??? i need my data
i tried drive recovering tools (advanced EFS data recovery, easeus . . ,) . but . . . it's encrypted and formatted drive.
can i undo quick format and decrypt ???
sorry my english is not good.
someone help me please.BitLocker is not the cause of failed to recover files.
Format a drive will clear all data saved on the hard disk. Thus recovery formatted data will be a hard disk based technology but not related to operation system. There is no build-in data recovery feature in Windows operations. So we will needto use third party recovery tool or contact third party data recovery company for current issue.
As recovery missing data service will be expensive, we can also check emails and contact friends to see if that can help get a part of files back especially for photos, documents etc. -
Problem with recovering data from Bit Locker enabled hard disk with bad sectors
Hi,
I have Lenovo T430 laptop with Windows 7 and Bit Locker enabled hard disk. While working I encountered blue screen error multiple times. After some time, the laptop stopped to boot by itself and started showing error 'A disk read write error has occurred.
Press Ctrl+Alt+Del to restart' message. I tried to connect the hard disk to a different PC as a secondary drive and tried to check the disk to recover the data. The 500 GB disk is showing as unallocated space and I am not sure how to recover the
data from the hard disk. Appreciate your help to recover the data from corrupted hard disk.
I used the Lenovo Diagnostics tools available in BIOS and it showed 48 bad sector errors on the hard disk. I also used Windows 7 CD and tried auto repair but it looks like it didn't do anything.
Thanks in advance!Hi SenneVL,
Since there are 48 bad sectors on your hard disk, this means the system can not boot any more, the data might not be restored in a normal way, you'd better turn to data restore company for help.
Regards
Wade Liu
TechNet Community Support -
I was in the process of reorganising my hard drives so I could RAID them however I managed to corrupt one drive and had to format it which meant I lost all my Logic Files and some other files. I managed to save a lot of files (mainly video files) before I had to format the drive but I need a Data Recovery service that will not alter anything on the hard drive and will put all the formatted files (regardless of the type) back for me so I can get the rest of the ones I need.
Thanks in advance.What about folders and such?
No. FS doesn't reconstruct folders. However, Data Rescue does, depending on how you use it. About the only thing in Data Rescue a Quick Scan ever seems to show you are files that are already live.
So that leaves you with a Deep Scan, or a Deleted Files scan. The first pass of a Deep Scan will attempt to retrieve folders and files, along with their original names. The second pass only looks for file patterns. Like recognizing a Photoshop .psd file. It will recover it, but give it a nonsense name. A Deleted Files scan only results in nonsense names of recognized file types; no folders.
What were you using File Salvage on? A hard drive?
Yes, though you can use it on a flash drive, or any other mounted drive.
At the moment it is estimating 289 hours remaining on a 1TB drive. Can it not go faster?
No, both of the software mentioned are slower than molasses in January. When you delete anything in Windows, its file table entry simply tagged as deleted. So to unerase them, the tag is removed. That's why it works to quickly and easily (assuming you haven't already overwritten the data to be recovered).
In OS X though, the whole idea of the underlying UNIX structure is all about security. It's not supposed to be easy to retrieve deleted items. When you delete items, their file table entries are erased. So the only way to find deleted items is to scour the entire drive for BOF (Beginning Of File) markers that don't have a matching starting block to anything that is in the file table.
Another question, half the drive was empty. Will it fly over that empty space or will it sieve through it incase there was some files stored on it?
If you use the Expert mode is FS, you can choose to do that: -
Data recovering from formatted bit locker encrypted portion.
unfortunately i formatted a partition which is bit locker encrypted having all my valuable documents and data. luckily i have bit locker recovery
key and my decryption password. i use m3 bit locker recovery software to recover my data using my store 48 digit recovery key but it give me error message 'recovery key is not matched' then i try my password, it give error message 'password not
matched' .
using cmd command 'manage-bde -status'
i get the following properties of my partition
C:\Windows\system32>manage-bde -status
BitLocker Drive Encryption: Configuration Tool version 6.1.7601
Copyright (C) Microsoft Corporation. All rights reserved.
Disk volumes that can be protected with
BitLocker Drive Encryption:
Volume D: []
[Data Volume]
Size: 218.81 GB
BitLocker Version: None
Conversion Status: Fully Decrypted
Percentage Encrypted: 0%
Encryption Method: None
Protection Status: Protection Off
Lock Status: Unlocked
Identification Field: None
Automatic Unlock: Disabled
Key Protectors: None Found
i use other data recovery soft wares it give me raw,meta and system file.
please help me in recovering my data.
sorry for unrelated description.Hi ,
I am afraid that we cannot get the data back if the drive has been formatted even if use the
BitLocker Repair Tool.
You’d better contact your local data recovery center to try to get data back.
Tracy Cai
TechNet Community Support -
Recently, I had a non-recoverable crash of my Windows XP Pro system. I clean-installed Vista (would not allow an upgrade install), and it moved all of my settings and programs into a windows.old folder. I'd like to be able to recover my stored passwords (even if I have to manually re-enter) and my bookmarks for Firefox. I was running version 4 at the time of the O/S crash. Thanks for any help you can provide.
Just as I expected. Before following my instructions, you might need to change your folder options to show hidden files. Now go to:
'''C:/windows.old/Documents and Settings/<username on XP>/Application Data'''
And copy everything inside the '''Mozilla''' folder to
'''C:/Users/<username on Vista>/AppData/Roaming/Mozilla'''
If the '''Mozilla''' folder doesn't exist, create one.
Now, go to '''C:/windows.old/Documents and Settings/<username on XP>/Local Settings/Application Data'''
And copy everything inside the '''Mozilla''' folder into
'''C:/Users/<username on Vista>/AppData/Local/Mozilla'''
Again, if the '''Mozilla''' folder doesn't exist, create one and rename it to '''Mozilla'''.
Hope this helps!
handsomeorlandoman
Maybe you are looking for
-
I cannot configure pop account in mail, says it is offline. What to do?
I cannot configure pop account in mail, says it is offline. What to do?
-
Using "calculate" in Acrobat Form to display document metadata (Author, etc.)
Can someone assist with a javascript that will retrieve the document "Subject" or "author" so that I can use that data on an acrobat form? (I am creating a form that will then be inserted as the first page in an existin adobe document and I want the
-
My Office Standard 2007 clearly states that a font Gill Sans is included but is missing from my list
-
ClassLoader conflict when re-deploying
Hello! I have the following problem with JDeveloper 11g and standalone WL 10gR3: When application is re-deployed, I am getting a class casting exception for MDSSession instance because of class loaders conflict (for old and new apps, I suppose). Any
-
Getting data from a webservice
Hi All, I have a web service for which i have created a datamodel also. I could see my webservice in the control pallete. one of its attributes is name_of_student.My requirement is that i have to display all the names in a dropdown list( Select One C