Recovered files gone after restarting Muse after Update

Muse quit unexpectedly while I was working on several websites in that were in recovery mode. When I restarted Muse, it told me that an update was available. After restarting Muse after the update, it did not attempt to recover the files that I was working on. Are the changes that I made lost forever, or can I find them stored somewhere on my computer? I have a current time machine back up. Will that be helpful?

Muse does not recover files from older versions of Muse.
The Muse team recommends you save any work in progress before updating Muse to a new version.
If you have a timemachine backup of the recovery files and the unsaved changes are important to you, you should be able to recover them by doing the following:
1. Look for the Muse recovery files in your time machine backup. They should be here:
/Users/your-user-name/Library/Preferences/AdobeMuse/Local Store/Recovery
Restore that folder to just before you did the update to Muse version 6.
2. Uninstall/delete Muse 6
3. Install Muse version 5.0 from here: http://labsdownload.adobe.com/pub/adobemuse/builds/muse_5-0_update_mac.dmg
4. Launch Muse version 5. Do not update. It should recover your files.
5. Save your file(s)
6. quit Muse, launch again, update to version 6.

Similar Messages

Have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!

have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?

If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8.

My MacBook Pro X.6.8 NO DISPLAY after restarted during software update.

My MacBook Pro X.6.8 after I did software update for 2 files, then restart/rebooted and when it resume back NO DISPLAY, totally black screen. I believed It's working in the background coz when I pressed buttons it makes sounds, so that's good but how can I see and bring back the display? I didnt so anything special. Prior to software update I did update my Adobe Flash for the latest version..
Please help anyone, I need my MacBook Pro to resume back to normal, I have many pending job to finish.. I hope the problem is only the display screen and not worst, coz I can't see and verify.
Thanks.

Oh No, still the same.. I follow exactly what you said, still no display.
I hear rebooting sound, like its normal, just missing my screen.
How come this happen, it works perfectly fine, I just want to update coz I had a message prior, so I did, but I just check first what are those needed to update. I saw Itunes v.11 and security patch update, something like that..
Then when it rebooted no more display.

Is there anyway to recover files permanently deleted in trash after a two month period?

I deleted some files that I thought I transferred to an external hard drive. However, after 2 months, I realized that all of the files did not transfer and I deleted them in trash about two months ago. Is there anyway to recover these files?

Probably not. All I can suggest is you contact a recovery service, but it's expensive and since you've been using the machine for over two months, most likely they're overwritten.

My Ipad air won't turn on after restarting during an update

It stopped turning on after I reset midway through an update because the update froze. As in, it stopped completely for four hours.

Did you try this?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

After restarting from Yosemite update my screen is black with sos beeps

i completed the Yosemite update when it restarted the screen stayed black with 3fast 3slow 3fast beeps.
ITs 2011 13inch macbook pro
the computer fan kicks in then the beeps then shuts off I can here the little clicK then starts again and repeats even when it's closed unplugged does not matter
i have tried all the command r and option suggestions with a previous posting about this
any other suggestions
tthanks

Hi Sully99999,
Thanks for contributing to the Apple Support Communities.
You mentioned that your MacBook Pro is beeping in the pattern 3 fast, 3 slow, 3 fast; and will not start up.
You can find an explanation of this beep pattern in the following support document:
Mac computers: About startup tones - Apple Support
3 long tones, 3 short tones, 3 long tones: Indicates EFI ROM corruption is detected and the computer is in EFI ROM recovery mode.
If your Mac does not respond to troubleshooting, you may need to seek service, as mentioned here:
If you hear beeps when your Mac starts up instead of the normal startup tone, your Mac may need to be serviced.
From:
OS X Mountain Lion: If you hear beeps when your computer starts up
You can find more information about having your MacBok Pro serviced at this link:
Apple - Support - Service Answer Center
Sincerely,
Jeremy

VXIpc-872 freezes after restart or after BIOS update save

I have a VXIpc-872 Slot 0 Controller. Unit will boot windows NT from Cold start, but performing a windows restart or following any BIOS modifications the controller freezes. Only get a solid black screen. Power OFF has been the only way to clear it.
Any thoughts on what might be wrong?

Hi Jason,
We have a really good Developer Zone article on the subject, you can find it here.
Restoring or Changing the Operating System in a VXIpc-770/870B Series Embedded Controller
http://zone.ni.com/devzone/cda/tut/p/id/3988
Thanks
Scott M.
Applications Engineer
National Instruments

Is there any way to recover files lost from restarting my Mac?

I had Garage Band and Pages documents open, and all of a sudden an opaque grey screen slid down over the screen and it asked me to restart the computer by holding down the power button. I did that because it wouldn't let me do anything else, and when I turned it back on, my Pages document and my Garage Band song were gone. Is there anything on Mac that does what PCs do, when it shuts down unexpectedly it saves your files? It would be really helpful to recover those documents!!

Hi Vicky, sorry to hear, where these new/unsaved docs, or older modified ones?
It's not likely, but if the latter...
It may be possible to recover some erased ones, but you must quit using the Computer immediately, because the OS will think it can write to those freed blocks on the disk.
Either boot this one in Target mode...
http://support.apple.com/kb/HT1661
And recovering from another Mac, or booting this Mac from another HDD, then using Data Rescue...
http://www.prosofteng.com/products/data_rescue.php
(Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
rccharles on file recovery...
"Stellar Phoenix Macintosh - Mac data recovery software, recovers data from damaged, deleted, or corrupted volumes and even from initialized disks."
They have a trial version, so I guess you can see if your data can be recovered...
http://www.stellarinfo.com/mac-data-recovery.htm
FileSalvage is an extremely powerful Macintosh application for exploring and recovering deleted files from a drive or volume. FileSalvage is designed to restore files that have:
    * been accidentally deleted.
    * become unreadable due to media faults.
    * been stored on a drive before it was re-initialized/formatted.
http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
http://discussions.apple.com/thread.jspa?messageID=11073082#11073082

Boot issue after shutdown plus power - no problem after restart or after removing power cord

Hello,
I have a Pavilion Elite m9275.nl desktop. I experience boot issues after a regular shut down.
After a regular shut down and pressing the power button within a few seconds/minutes, it keeps hanging in the HP startup / BIOS screen, Windows 8 won't boot, the hard drive light doesn't flash;
After a restart from Windows (instead of shut down) it boots correctly from the c-drive. No hard-drive problems at all;
After a shut down and removing the power cord for 10-15 minutes, it boots correctly from the c-drive. No hard-drive problems at all.
When the PC does not boot, F10 (to enter BIOS settings) does not work neither, so it seems to be a hardware or BIOS issue.
I already replaced the CMOS battery and already loaded default BIOS settings.
During a succesful boot or after pressing F10 (to enter BIOS settings) the screen shows some disk information right after the BIOS. This is the screen that says something like "press CTRL-I to start configuration utility". During a succesful boot the hard disk light flashes shortly before displaying that screen. During an unsuccesful boot the hard disk doesn't flash.
Before replacing a hardware component, I need to know what to replace...
Could it be the hard disk controller or hard disk is defect?
Where is the hard disk controller stored?
Can I upgrade the firmware of the hard disk controller?
BUT: why does it work when I remove the power cord for 15 minutes or after a restart (instead of a shutdown and than pressing power)?
Many thanks in advance,
Sjoerd-Jaap Westra

sjwestra
I apologize for the delay in responding to your post. First I am glad you were able to resolve your initial issue and to help I have included a link to a document 'Bios Setup Utility Information and Menu Options' that will provide you with instructions on how to enter the Bios and provides additional information on navigating it as well.
http://goo.gl/HIclUV
If you need any further information please re-post.
Thank you for your post.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Where have my cc files gone? I have just updated my cc app and now, have no cc folder on my computer

I spent last week syncing 50GB of data in my cc folder and two computers. Now the cc app has updated and the folder has disappeared from my computer.Where have they gone?

yeah...check out the post about it here - Why do I have 3 'Creative Cloud Files' folders?

Time Machine Disk borked after 2013-003 security update

I installed the 2013-003 update on the weekend, and conincidentally my Time Machine disk is now locked. I haven't installed anything else really, so this Security Update is the only change I've made in recent memory, which makes me think that it is the cause, or at least the exacerbating factor.
Background: I have a 27" iMac 3.4GHz / 16 GB (iMac 12,2) with running Mountain Lion 10.8.4. I have an external RAID array consisting of 2x 3 TB Seagate Barracudas in a Nexstar MX two-bay enclosure, with the enclosure hardware controlling the RAID. This has worked more or less flawlessly since last fall -- that is until this update. No raid errors from the enclosure -- as far as it knows the disks are in fine health.
After restarting following the update, I get a message that the OS has locked the Time Machine disk (my aforementioned RAID array) -- so I can read data from it, but I can no longer write -- I can no longer make backups. It mounted the disk, and suggested I use disk first aid to fix it, so I do.
Open Disk First aid, and set it to Verify. I get some strange errors. Don't take my word for it, here's the log:
2013-08-18 15:12:11 -0600: Disk Utility started.
2013-08-18 15:12:18 -0600: Verifying partition map for “JMicron H/W RAID1 Media”
2013-08-18 15:12:18 -0600: Starting verification tool:
2013-08-18 15:12:19 -0600: Checking prerequisites
2013-08-18 15:12:19 -0600: Checking the partition list
2013-08-18 15:12:19 -0600: Checking for an EFI system partition
2013-08-18 15:12:19 -0600: Checking the EFI system partition’s size
2013-08-18 15:12:19 -0600: Checking the EFI system partition’s file system
2013-08-18 15:12:19 -0600: Checking all HFS data partition loader spaces
2013-08-18 15:12:19 -0600: Checking Core Storage Physical Volume partitions
2013-08-18 15:12:19 -0600: The partition map appears to be OK
2013-08-18 15:12:19 -0600:
2013-08-18 15:12:19 -0600:
2013-08-18 15:12:33 -0600: Verifying volume “Term Meshern”
2013-08-18 15:12:33 -0600: Starting verification tool:
2013-08-18 15:12:34 -0600: Checking file system2013-08-18 15:12:34 -0600: Checking Journaled HFS Plus volume.
2013-08-18 15:12:34 -0600: Checking extents overflow file.
2013-08-18 15:12:34 -0600: Checking catalog file.
2013-08-18 15:13:08 -0600: Incorrect block count for file shutdown_time
2013-08-18 15:13:08 -0600: (It should be 1 instead of 0)
2013-08-18 15:13:08 -0600: Incorrect block count for file permStore
2013-08-18 15:13:08 -0600: (It should be 1 instead of 0)
2013-08-18 15:13:08 -0600: Incorrect block count for file shutdown_time
2013-08-18 15:13:08 -0600: (It should be 1 instead of 0)
2013-08-18 15:14:37 -0600: Incorrect number of thread records
2013-08-18 15:14:52 -0600: Checking multi-linked files.
2013-08-18 15:16:02 -0600: Checking catalog hierarchy.
2013-08-18 15:17:00 -0600: Invalid directory item count
2013-08-18 15:17:00 -0600: (It should be 89693 instead of 89695)
2013-08-18 15:17:02 -0600: Missing thread record (id = 9067450)
2013-08-18 15:17:02 -0600: Missing thread record (id = 9067458)
2013-08-18 15:17:02 -0600: Invalid directory item count
2013-08-18 15:17:02 -0600: (It should be 332226 instead of 332224)
2013-08-18 15:17:02 -0600: Checking extended attributes file.
2013-08-18 15:18:24 -0600: Checking multi-linked directories.
2013-08-18 15:18:25 -0600: Invalid parent for directory inode (id = 9067450)
2013-08-18 15:18:25 -0600: (It should be 19 instead of 18)
2013-08-18 15:18:25 -0600: Invalid name for directory inode (id = 9067450)
2013-08-18 15:18:25 -0600: (It should be dir_9067450 instead of temp9067450)
2013-08-18 15:18:25 -0600: Incorrect number of directory hard links
2013-08-18 15:21:13 -0600: The volume Term Meshern could not be verified completely.
2013-08-18 15:21:13 -0600: Error: This disk needs to be repaired. Click Repair Disk.2013-08-18 15:21:13 -0600:
2013-08-18 15:21:13 -0600: Disk Utility stopped verifying “Term Meshern”: This disk needs to be repaired. Click Repair Disk.
2013-08-18 15:21:13 -0600:
2013-08-18 15:21:19 -0600: Verify and Repair volume “Term Meshern”
2013-08-18 15:21:19 -0600: Starting repair tool:
2013-08-18 15:21:19 -0600: Checking file system2013-08-18 15:21:19 -0600: Checking Journaled HFS Plus volume.
2013-08-18 15:21:19 -0600: Checking extents overflow file.
2013-08-18 15:21:20 -0600: Checking catalog file.
2013-08-18 15:21:53 -0600: Incorrect block count for file shutdown_time
2013-08-18 15:21:54 -0600: (It should be 1 instead of 0)
2013-08-18 15:21:54 -0600: Incorrect block count for file permStore
2013-08-18 15:21:54 -0600: (It should be 1 instead of 0)
2013-08-18 15:21:54 -0600: Incorrect block count for file shutdown_time
2013-08-18 15:21:54 -0600: (It should be 1 instead of 0)
2013-08-18 15:23:24 -0600: Incorrect number of thread records
2013-08-18 15:23:38 -0600: Checking multi-linked files.
2013-08-18 15:24:50 -0600: Checking catalog hierarchy.
2013-08-18 15:25:48 -0600: Invalid directory item count
2013-08-18 15:25:48 -0600: (It should be 89693 instead of 89695)
2013-08-18 15:25:50 -0600: Missing thread record (id = 9067450)
2013-08-18 15:25:50 -0600: Missing thread record (id = 9067458)
2013-08-18 15:25:50 -0600: Invalid directory item count
2013-08-18 15:25:50 -0600: (It should be 332226 instead of 332224)
2013-08-18 15:25:50 -0600: Checking extended attributes file.
2013-08-18 15:27:12 -0600: Checking multi-linked directories.
2013-08-18 15:27:13 -0600: Invalid parent for directory inode (id = 9067450)
2013-08-18 15:27:13 -0600: (It should be 19 instead of 18)
2013-08-18 15:27:13 -0600: Invalid name for directory inode (id = 9067450)
2013-08-18 15:27:13 -0600: (It should be dir_9067450 instead of temp9067450)
2013-08-18 15:27:13 -0600: Incorrect number of directory hard links
2013-08-18 15:30:01 -0600: The volume Term Meshern could not be verified completely.
2013-08-18 15:30:01 -0600: Volume repair complete.2013-08-18 15:30:01 -0600: Updating boot support partitions for the volume as required.2013-08-18 15:30:01 -0600: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.2013-08-18 15:30:01 -0600:
2013-08-18 15:30:01 -0600: Disk Utility stopped repairing “Term Meshern”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
2013-08-18 15:30:01 -0600:
So since this, I can rarely mount the disk. When I can, I cannot unlock it to back up to -- although if it's awful as it suggests, I don't think I want to.
But, it all seems a little strange to me. This is RAID, I shouldn't have these problems, no? I mean, the disks are fine -- although if there was an error on the primary, enough time has passed that's been copied to the secondary by now, so I can't swap them.
Has anyone else had an external disk go T/U after this update? Is there some fix I'm missing? I have a new external disk on order (with Thundebolt) so if I have to rebuild my back ups, it won't take as long as this guy over USB, but I don't want to forgo the versions of the files I have no going back some 2 years.
Any insight? Is my backup borked, making me start over new and lose my back up history? Is there anyway I can recover this disk, outside of Disk First Aid / sending it to a data recovery place? Even do you think if I rolled back this update (if that's even a thing) would it set me back on track?
Thanks!

I had the same issue after a re-build of mountain lion on an older Macbook pro. I followed you link and instructions and it worked! Thanks wjosten

Bluetooth OFF after restart / resume from sleep

Hi, i have problem with integrated Bluetooth in my T400s. If i start Windows from off state, BT is on and my BT mouse is connected correclty. But if i restart or go to sleep mode and back resume from sleep, BT stays OFF and i have to switch it on via Fn+F5. I tried to reinstall clean Windows 7 with all drivers through Lenovo System Update, but no solution. Does somebody have the same problem? Any idea?
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64
Solved!
Go to Solution.

Unbelivable, crazy things happens. You are right, problem is solved.
1 - 2 weeks ago i tried Ubuntu, not installed, just run from USB flash and look how new one looks like
2 - probably from that time integrated BT did not start after restart or resume from sleep - really strange (i have WWAn as well but i do not use it)
3 - i tried to disable I/O Access for all devices in BIOS and set back On - that did not help
4 - i have loaded default setting in BIOS by F9 and saved and after restart BINGO BT mobule works even after restart or after resume from Sleep.
It is really strange for me, but yeahh, crazy things happend.
Thanks.
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64

The same recovered files in the trash, every morning

I'm accustomed to Mac OS X's practice of placing potentially important files in a "Recovered Files" folder in the Trash after a reboot if, say, an application crashes. But I'm getting annoyed by my computer's habit of placing a set of files in such a folder every single time it's shut down. The files all look like remnants of an Asian-language font set. Here are the most recent names:
#Junggothic.dfontATS_493169727169
#Junggothic.dfontATS_17722080525333
#Junggothic.dfontATS_3922-125658874
#Shinmyoungjo.dfontATS_493169492902
#Shinmyoungjo.dfontATS_17722080452720
#Shinmyoungjo.dfontATS_3922-126354157
#Taegraphic.dfontATS_493168710633
#Taegraphic.dfontATS_17722080055722
#Taegraphic.dfontATS_3922-128251752
I do not use any Asian-language input methods whatsoever, nor do I visit Asian-language websites with any regularity. But I can confirm that all three of these fonts:
#Junggothic.dfont
#Shinmyoungjo.dfont
#Taegraphic.dfont
... are present in ~/Library/Fonts. Does anyone else also have them, and if so do you know what program may have installed them? Is the hash symbol supposed to be present in the name? I'm tempted just to trash them, but I'd prefer not to if they're regularly used by websites, etc.
Thanks!

Since they aren't installed by OS X or MS Office, then they were installed by some third-party software you installed.
The files in the Trash are actually cache files generated by the ATS = means either Apple or Adobe Type System. Probably the former. Most likely these result from the nightly cleanup scripts tossing unneeded cache files from the Type System.
If you don't use these fonts then track them down and remove them. If they aren't in one of the three Fonts folders normally used, then they could be Adobe fonts stored elsewhere on your computer. Use a utility like Easy Find - VersionTracker or MacUpdate - to search for them.

After update to ios 7 , my numbers app cannot sync with iCloud .all my previous files gone.why?

After I update to ios7 , numbers app not working well,it cannot sync my previous iCloud documents done in ios6.1.3 .all my previous file gone, I try to uninstall numbers app and reinstall back, but no luck. I try to use safari on my desktop to go iCloud.com to back up my file but I found that I cannot login to numbers , it always jump back to ask me key in username and password..
Please help...

samrae88 wrote:
This issue seriously needs resolved or I will be leaving apple and iphone services for a windows phone.
In that case, GOODBYE!
FYI, these are user to user technical support forums. No one cares if you stay or leave, so leave.

Curious about "Recovered Files" after restart

Is there a way to find out the source of recovered files and what they mean? Just curious.
My latest were:
A folder: <msoclip>
A folder: <CardModeFiles>
Thank you.

Recovered items appear when a program that creates temporary files either crashes or does not clean up after itself properly. The Mac OS cleans the files up and puts them in this folder. This is an old apple tech note, but it is still valid:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh2267.html
I think msoclip comes from some Microsoft software. I don't know about the CardModeFiles thingy. You can safely delete these files.
charlie

Recovered files gone after restarting Muse after Update

Similar Messages

Maybe you are looking for