Recovering corrupt dmg file
I made an image (dmg file) of my computer as a backup and now I need to recover that file. When I try to open it I get "no mountable file systems". Is there a utility that will let me open this file so I can access the data?
Hello! You're unlikely to recover a bad disk image. About the only thing to try is to open disk utility and drag the icon to the upper left pane when your hard drives are listed and see if you can run a "repair disk" function on it. Did you create the image of the disk using disk utility with the intent of restoring a drive? Tom
Similar Messages
-
I deleted several .mov files a while back that were encrypted into a .dmg file. Using Disk Drill, I was able to recover 5 of these files, roughly 500-900 MB each and successfully moved them to my desktop. When I try to open the .dmg file, the dreaded error message "no mountable file systems" shows up. I have tried various fixes based on searches and none have worked. Are these files just corrupted and unreadable, or is there a way to fix?
Thanks for the obvious question. I mean it. The very same thought came to me this morning and, sure enough, I had booted into another drive--my old one that, of course, had the old desktop, etc.
It didn't dawn on me that this was the case since I hadn't set it as a boot drive but I guess in the course of all the restarts I did, it got switched.
I'm back to normal again. -
Is there a way to recover corrupted psd. files?
I recently transferred all my work from a work computer to my mac at home. i am unable to access my work computer until October as we are having a 'break'. However, I have a deadline for September 15th and I need all my files.
Some older files open perfectly fine but I fear there was a problem in downloading-perhaps due to my haste to leave and enjoy the beautiful weather!
I tried downloading a Remo Repair software but unfortunately this was unable to launch. Is there program out there that you would recommend in this instance for me to recover my psd files-which are of great importance!
Any help would be appreciated
Basic notes:
Created on Windows computer cs5
Trying to open on Mac cs5
Sd card used to transfer-couldn't eject, this may be the problemIt is most difficult to recover a corrupted file. Many have tried but almost all end up in failure. Try opening in another program. IF you can then "save as" and you can probably open in PS.
Do you have a backup? Do you still have original files on Win computer? These are your best bets. It is too late for these files, but I think you can see the necessity of having a backup on a separate HD or even on a disk. -
DESPERATE: need to recover corrupted Word file
Hi Everyone,
I hope someone out there can help me recover a corrupted Word file. My Macbook froze while I working on an important document. I was forced to restart it but when I tried to reopen the file I had been working on, I got a message that "The file is corrupt and cannot be opened" I have surfed the web for solutions and some suggested opening and repairing the file under PC versions of Word. I've done that, but when the file opens, the entire document is filled with weird symbols and characters. Please tell that I haven't lost everything
Thanks for any leads for solving this or on any recovery softwares that might provide some partial recovery of the data.Well it's hard to say if recovery of your file is possible, but you can check if you have selected the Save AutoRecover information every x minutes check box in your MS Office settings.
If yes just check AutoRecover file location box in MS Office settings.
If not and you don't have backup, your file is lost i think.
Regards -
How to recover corrupt passwd file for c6000+x6270?
i met a problem.
passwd file corrupts and nobody can login.
hardware platform is c6000+x6270 blade, os disks have mirrorred.
in this environment, how to recover the passwd file(we have one copy)?
ThanksThe procedure can differ depending which volume manager software you use, it this is the case. But basically, you should boot with an external media, like DVD or jumpstart server, mount the root partition and fix the /etc/passwd file, umount the partition and finally reboot.
-
I'm having an issue that seems to come up before with others. Every DMG file I have tried downloading is corrupt and is giving me invalid checksum etc..
This isn't limited to one specific machine as I have an iMac and 2 macbooks all try and make the same download on the same network and all 3 are getting the same issues. i've rebooted the modem / router and nothing!
This is really frustrating as I can't get photoshop to work without installing java and even that 60meg download is getting corrupt.
Routerwise i have a netgear WGR614v9 (seems like a piece of crap) and can't get the firmware to update.
This is really frustrating as i need to work from home but can't even install the software i need to use.
Anyone figure out anything?Add me to the list. Running Mountain Lion on my MBP and Lion on my Mac Mini. The MBP is connecting to the Internet via wireless and the mac mini is wired. Tried rebooting the cable modem and switch to see if that made a difference but it didn't. I cannot understand why unless there's been an update to lion which prevents dmg files from opening a.k.a. The bzip issue that affected osx 10.3 and earlier.
All other file types are fine, it just seems to be affecting dmg files. Also, if it was corruption over the wire then surely web sites wouldn't load properly.
Confused! -
Corrupt DMG file - "No Mountable File Systems"
Hello, I have an important backup DMG file that I can't mount. When I try, I get this error..."No Mountable File Systems".
I have tried the following with no success...
- repairing the DMG in Disk Utility.
- converting the DMG in Disk Utility to a R/W image.
- Repair in Data Rescue 3
- Repair in Disk Warrior
- Repair in File Salvage (this actually recovered a single mp3 file, so this makes me think the data is still there)
- Repair in Stellar Phoenix
- Repair in Disk Drill
I have read on one of these forums (I can't seem to find it anymore) that someone had a similar issue and someone helped them through a lot of digging around in the broken file (something to do with headers?)...and in the end they managed to repair the broken DMG file. I would really like to repair this file, so just in case someone who knows how to fix this sort of thing, I've shared the file here...
files.me.com/jeffvandyck/x4qv9c
I have a few other files like this and would really like to recover those as well. I'm relatively technical, and once I understand what I'm looking for I can try to fix the others.
Thanks in advance for any help!
Cheers,
JeffOutput of hdid -nomount -verbose -debug
Jeffs-MacBook-Pro:~ Jeff$ hdid /Users/Jeff/Jeff\ Projects.dmg -nomount -verbose -debug
calling DIHLDiskImageAttach with
agent: hdid
mount-required: false
debug: true
quiet: false
image-options:
drive-options:
main-url: /Users/Jeff/Jeff Projects.dmg
verbose: true
mount-attempted: false
2011-10-10 13:30:57.030 hdiutil[438:60f] DIHLDiskImageAttach: creating DIHelperProxy
2011-10-10 13:30:57.032 hdiutil[438:60f] [DIHelperProxy alloc]
2011-10-10 13:30:57.032 hdiutil[438:60f] [DIHelperProxy alloc] returning self 0x100500a20, retainCount 1
2011-10-10 13:30:57.033 hdiutil[438:60f] DIHLDiskImageAttach: running DIHelperProxy
2011-10-10 13:30:57.033 hdiutil[438:60f] [DIHelperProxy performOperationReturning] entry
2011-10-10 13:30:57.034 hdiutil[438:60f] [DIHelperProxy performOperationReturning] detaching thread
2011-10-10 13:30:57.034 hdiutil[438:2603] [DIHelperProxy workerThread] entry
2011-10-10 13:30:57.034 hdiutil[438:2603] [DIHelperProxy workerThread] setting up server
2011-10-10 13:30:57.035 hdiutil[438:2603] [DIHelperProxy threadSetupServer] entry
2011-10-10 13:30:57.035 hdiutil[438:2603] [DIHelperProxy threadSetupServer] setting up _headerConnection
2011-10-10 13:30:57.035 hdiutil[438:2603] [DIHelperProxy threadSetupServer] setting up _headerConnection rootObject
2011-10-10 13:30:57.036 hdiutil[438:2603] [DIHelperProxy threadSetupServer] adding NSConnectionDidInitializeNotification notification
2011-10-10 13:30:57.036 hdiutil[438:2603] [DIHelperProxy threadSetupServer] exiting
2011-10-10 13:30:57.036 hdiutil[438:2603] [DIHelperProxy workerThread] launching
2011-10-10 13:30:57.037 hdiutil[438:2603] [DIHelperProxy threadLaunchToolAuthenticated] entry
2011-10-10 13:30:57.038 hdiutil[438:2603] launching helper tool at "/System/Library/PrivateFrameworks/DiskImages.framework/Resources/diskimages-he lper".
2011-10-10 13:30:57.038 hdiutil[438:2603] [DIHelperProxy threadLaunchToolAuthenticated] adding NSTaskDidTerminateNotification notification
2011-10-10 13:30:57.038 hdiutil[438:2603] [DIHelperProxy thread LaunchToolAuthenticated] launching
2011-10-10 13:30:57.039 hdiutil[438:2603] [DIHelperProxy threadLaunchToolAuthenticated] exiting
2011-10-10 13:30:57.040 hdiutil[438:2603] [DIHelperProxy workerThread] running runloop
2011-10-10 13:30:57.040 hdiutil[438:2603] DIHelperProxy threadRunRunLoop] entry, retainCount 3
2011-10-10 13:30:57.049 hdiutil[438:2603] [DIHelperProxy helperConnectionInitialized] entry
2011-10-10 13:30:57.049 hdiutil[438:2603] [DIHelperProxy helperConnectionInitialized] adding new NSConnectionDidDieNotification notification
2011-10-10 13:30:57.049 hdiutil[438:2603] [DIHelperProxy helperConnectionInitialized] removing old NSConnectionDidDieNotification notification
2011-10-10 13:30:57.050 hdiutil[438:2603] [DIHelperProxy helperConnectionInitialized] removing old connection rootObject
2011-10-10 13:30:57.050 hdiutil[438:2603] [DIHelperProxy helperConnectionInitialized] invalidating old connection
2011-10-10 13:30:57.050 hdiutil[438:2603] [DIHelperProxy helperConnectionInitialized] releasing old connection
2011-10-10 13:30:57.051 hdiutil[438:2603] [DIHelperProxy helperConnectionInitialized] and replacing with new connection
2011-10-10 13:30:57.051 hdiutil[438:2603] [DIHelperProxy helperConnectionInitialized] exit
2011-10-10 13:30:57.052 hdiutil[438:2603] [DIHelperProxy connectToFramework] entry, helper 0x10011d350
2011-10-10 13:30:57.052 hdiutil[438:2603] [DIHelperProxy connectToFramework] exit
2011-10-10 13:30:57.152 hdiutil[438:2603] [DIHelperProxy sendOperationToHelper] entry
2011-10-10 13:30:57.153 hdiutil[438:2603] [DIHelperProxy sendOperationToHelper] starting operation with helper
2011-10-10 13:30:57.155 hdiutil[438:2603] [DIHelperProxy sendOperationToHelper] exit
2011-10-10 13:30:57.159 hdiutil[438:2603] [DIHelperProxy frameworkCallbackWithDictionary] entry
status proc called: initialize
myStatusProc: returning 0
2011-10-10 13:30:57.159 hdiutil[438:2603] [DIHelperProxy frameworkCallbackWithDictionary] exit
2011-10-10 13:30:57.160 diskimages-helper[440:2003] _imageOptions: {
"enable-keychain" = 1;
2011-10-10 13:30:57.162 diskimages-helper[440:2003] _driveOptions: {
autodiskmount = 0;
"unmount-timeout" = 0;
2011-10-10 13:30:57.162 diskimages-helper[440:2003] DIHelperAttach: performOperation: initializing framework
2011-10-10 13:30:57.163 diskimages-helper[440:2003] {
agent = hdid;
"auto-fsck-failure-override-type" = callback;
"auto-open-ro-root" = 0;
"auto-open-rw-root" = 0;
"auto-stretch" = 0;
"bundlebs-checkpointing" = 0;
"bundlebs-localcloseonflush" = 0;
"bundlebs-localcloseonidle" = 0;
"bundlebs-localcloseonsleep" = 0;
"bundlebs-localfdcount" = 6;
"bundlebs-remotecloseonflush" = 0;
"bundlebs-remotecloseonidle" = 0;
"bundlebs-remotecloseonsleep" = 0;
"bundlebs-remotefdcount" = 3;
"burn-apple-supported-devices-only" = 0;
"burn-no-underrun-protection" = 0;
"burn-synthesize-content" = 1;
"bzip2-level" = 0;
"callback-with-sla" = 1;
debug = 1;
"disable-encrypted-images" = 0;
"disable-kernel-mounting" = 1;
"disable-owners" = 0;
"drive-options" = <62706c69 73743030 d0080000 00000000 01010000 00000000 00010000 00000000 00000000 00000000 0009>;
"enable-owners" = 0;
"filevault-default-case-sensitive-file-system" = "Case-sensitive Journaled HFS+";
"filevault-default-encryption-type" = "AES-128";
"filevault-default-file-system" = "Journaled HFS+";
"filevault-default-image-type" = SPARSEBUNDLE;
"filevault-default-partition-type" = SPUD;
"filevault-default-volume-name" = FileVault;
"force-idme" = 0;
"hfsplus-stretch-parameters" = {
"hfsplus-stretch-allocation-block-size" = 4096;
"hfsplus-stretch-allocation-file-size" = 8388608;
"hfsplus-stretch-threshold" = 524288;
"idle-timeout" = 15;
"ifd-format" = UDZO;
"ifd-ignore-io-errors" = 1;
"ifd-segment-size" = 0;
"iff-format" = UDZO;
"iff-fs" = "HFS+";
"iff-layout" = SPUD;
"iff-source-owners" = auto;
"iff-spotlight-indexing" = 0;
"iff-temp-sparse-band-size" = 20480;
"iff-temp-use-rw-if-possible" = 1;
"iff-usehelper" = 1;
"ignore-bad-checksums" = 0;
"image-options" = <62706c69 73743030 d0080000 00000000 01010000 00000000 00010000 00000000 00000000 00000000 0009>;
"main-url" = "file://localhost/Users/Jeff/Jeff%20Projects.dmg";
"mount-attempted" = 0;
"mount-point" = "/Volumes/";
"mount-private" = 0;
"mount-required" = 0;
"mount-type" = in;
"nbi-spotlight-indexing" = 0;
operation = DIHelperAttach;
"progress-delay" = 5;
"pthread-reader-cap" = 4;
quiet = 0;
"reauthenticate-upon-wake" = 1;
"skip-auto-fsck-for-system-images" = 1;
"skip-idme" = 1;
"skip-idme-reveal" = 0;
"skip-idme-trash" = 0;
"skip-previously-verified" = 1;
"skip-sla" = 0;
"skip-verify" = 1;
"skip-verify-locked" = 0;
"skip-verify-remote" = 1;
"sparsebundle-compactonidle" = 0;
"suppress-uiagent" = 1;
"unmount-timeout" = 0;
"use-compressed-xml" = 0;
"use-keychain" = 1;
verbose = 1;
"zlib-level" = 1;
DILoadDriver: checking for disk image driver
DILoadDriver: DI_kextExists() returned 0x00000000 (0)
DIIsInitialized: returning NO
2011-10-10 13:30:57.169 diskimages-helper[440:2003] -checkForPreviouslyAttachedImage: entry
2011-10-10 13:30:57.169 diskimages-helper[440:2003]
file://localhost/Users/Jeff/Jeff%20Projects.dmg - (null) ((null), (null)). perm=0
DIIsInitialized: returning YES
DIBackingStoreNewWithCFURL: entry with
file://localhost/Users/Jeff/Jeff%20Projects.dmg
skip-permissions-check: true
DIBackingStoreInstantiatorProbe: entry
file://localhost/Users/Jeff/Jeff%20Projects.dmg
skip-permissions-check: true
DIBackingStoreInstantiatorProbe: probing interface 0 CBSDBackingStore
CBSDBackingStore::newProbe score 100 for file://localhost/Users/Jeff/Jeff%20Projects.dmg
DIBackingStoreInstantiatorProbe: interface 0, score 100, CBSDBackingStore
DIBackingStoreInstantiatorProbe: probing interface 1 CBundleBackingStore
CBundleBackingStore::newProbe score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.dmg
DIBackingStoreInstantiatorProbe: interface 1, score -1000, CBundleBackingStore
DIBackingStoreInstantiatorProbe: probing interface 2 CRAMBackingStore
CRAMBackingStore::probe: scheme "file": not ram: or ramdisk: scheme.
CRAMBackingStore::probe: score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.dmg
DIBackingStoreInstantiatorProbe: interface 2, score -1000, CRAMBackingStore
DIBackingStoreInstantiatorProbe: probing interface 3 CCarbonBackingStore
CCarbonBackingStore::newProbe: setting initial rval to +100
CCarbonBackingStore::newProbe score 100 for file://localhost/Users/Jeff/Jeff%20Projects.dmg
DIBackingStoreInstantiatorProbe: interface 3, score 100, CCarbonBackingStore
DIBackingStoreInstantiatorProbe: probing interface 4 CDevBackingStore
CDevBackingStore::newProbe: not /dev/disk or /dev/rdisk (/Users/Jeff/Jeff Projects.dmg).CDevBackingStore::newProbe score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.dmg
DIBackingStoreInstantiatorProbe: interface 4, score -1000, CDevBackingStore
DIBackingStoreInstantiatorProbe: probing interface 5 CCURLBackingStore
CCURLBackingStore::probe: scheme is: file
CCURLBackingStore::probe: not recognized URL scheme.
CCURLBackingStore::probe: score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.dmg
DIBackingStoreInstantiatorProbe: interface 5, score -1000, CCURLBackingStore
DIBackingStoreInstantiatorProbe: probing interface 6 CVectoredBackingStore
CVectoredBackingStore::newProbe not "vectored" scheme.
CVectoredBackingStore::newProbe score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.dmg
DIBackingStoreInstantiatorProbe: interface 6, score -1000, CVectoredBackingStore
DIBackingStoreInstantiatorProbe: selecting CBSDBackingStore
DIBackingStoreNewWithCFURL: CBSDBackingStore
CBSDBackingStore::setNoFollow: setting _noFollow to 0
DIBackingStoreNewWithCFURL: instantiator returned 0
DIBackingStoreNewWithCFURL: returning 0x00000000
2011-10-10 13:30:57.170 diskimages-helper[440:2003] -checkForPreviouslyAttachedImage: resolving file://localhost/Users/Jeff/Jeff%20Projects.dmg returned 0
2011-10-10 13:30:57.170 diskimages-helper[440:2003] -checkForPreviouslyAttachedImage: imageUID (
"d234881026:i2592177"
) shadowUID (null)
***** testing:
0: d234881026:i939052
(null)
(null)
***** testing:
0: d234881026:i939052
(null)
(null)
***** testing:
0: d234881026:i939052
(null)
(null)
2011-10-10 13:30:57.173 diskimages-helper[440:2003] DIHelperAttach: performOperation: resolving disk image
DIIsInitialized: returning YES
DIIsInitialized: returning YES
DIBackingStoreNewWithCFURL: entry with
file://localhost/Users/Jeff/Jeff%20Projects.dmg
image-path: /Users/Jeff/Jeff Projects.dmg
enable-keychain: true
DIBackingStoreInstantiatorProbe: entry
file://localhost/Users/Jeff/Jeff%20Projects.dmg
image-path: /Users/Jeff/Jeff Projects.dmg
enable-keychain: true
DIBackingStoreInstantiatorProbe: probing interface 0 CBSDBackingStore
CBSDBackingStore::newProbe score 100 for file://localhost/Users/Jeff/Jeff%20Projects.dmg
DIBackingStoreInstantiatorProbe: interface 0, score 100, CBSDBackingStore
DIBackingStoreInstantiatorProbe: probing interface 1 CBundleBackingStore
CBundleBackingStore::newProbe score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.dmg
DIBackingStoreInstantiatorProbe: interface 1, score -1000, CBundleBackingStore
DIBackingStoreInstantiatorProbe: probing interface 2 CRAMBackingStore
CRAMBackingStore::probe: scheme "file": not ram: or ramdisk: scheme.
CRAMBackingStore::probe: score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.dmg
DIBackingStoreInstantiatorProbe: interface 2, score -1000, CRAMBackingStore
DIBackingStoreInstantiatorProbe: probing interface 3 CCarbonBackingStore
CCarbonBackingStore::newProbe: setting initial rval to +100
CCarbonBackingStore::newProbe score 100 for file://localhost/Users/Jeff/Jeff%20Projects.dmg
DIBackingStoreInstantiatorProbe: interface 3, score 100, CCarbonBackingStore
DIBackingStoreInstantiatorProbe: probing interface 4 CDevBackingStore
CDevBackingStore::newProbe: not /dev/disk or /dev/rdisk (/Users/Jeff/Jeff Projects.dmg).CDevBackingStore::newProbe score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.dmg
DIBackingStoreInstantiatorProbe: interface 4, score -1000, CDevBackingStore
DIBackingStoreInstantiatorProbe: probing interface 5 CCURLBackingStore
CCURLBackingStore::probe: scheme is: file
CCURLBackingStore::probe: not recognized URL scheme.
CCURLBackingStore::probe: score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.dmg
DIBackingStoreInstantiatorProbe: interface 5, score -1000, CCURLBackingStore
DIBackingStoreInstantiatorProbe: probing interface 6 CVectoredBackingStore
CVectoredBackingStore::newProbe not "vectored" scheme.
CVectoredBackingStore::newProbe score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.dmg
DIBackingStoreInstantiatorProbe: interface 6, score -1000, CVectoredBackingStore
DIBackingStoreInstantiatorProbe: selecting CBSDBackingStore
DIBackingStoreNewWithCFURL: CBSDBackingStore
CBSDBackingStore::setPermission: opening /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::OpenLockFriendly: mapping flags 0x00000002 -> 0x00000026 (locks are MANDATORY)
(RW lock acquired)
CBSDBackingStore::setPermission: kDI_PERM_READWRITE granted.
CBSDBackingStore::setNoFollow: setting _noFollow to 0
DIBackingStoreNewWithCFURL: instantiator returned 0
DIBackingStoreNewWithCFURL: returning 0x00000000
DIResolveURLToBackingStore: processing level 1 encodings.
DIFileEncodingNewWithBackingStore: entry for encoding level 1
DIFileEncodingInstantiatorProbe: entry for level 1
image-path: /Users/Jeff/Jeff Projects.dmg
enable-keychain: true
DIFileEncodingInstantiatorProbe: probing level 1 interface 0 CMacBinaryEncoding
CBSDBackingStore::openDataFork: /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::openDataFork: about to open /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::getNoFollow: returning 0
CBSDBackingStore::OpenLockFriendly: mapping flags 0x00000002 -> 0x00000026 (locks are MANDATORY)
(RW lock acquired)
CBSDBackingStore::openDataFork: returning 0
CBSDBackingStore::closeDataFork fSIZE = 868220928
00000000: 7801 edd0 3101 0000 00c2 a0f5 4fed 6d07 | x...1.......O.m. |
00000010: 8840 61c0 8001 0306 0c18 3060 c080 0103 | [email protected]`.... |
00000020: 060c 1830 60c0 8001 0306 0c18 3060 c080 | ...0`.......0`.. |
00000030: 0103 060c 1830 60c0 8001 0306 0c18 3060 | .....0`.......0` |
00000040: c080 0103 060c 1830 60c0 8001 0306 0c18 | .......0`....... |
00000050: 3060 c080 0103 060c 1830 60c0 8001 0306 | 0`.......0`..... |
00000060: 0c18 3060 c080 0103 060c 1830 60c0 8001 | ..0`.......0`... |
00000070: 0306 0c18 3060 c080 0103 060c 1830 60c0 | ....0`.......0`. |
diskimages-helper: fileNameLength $00000001
diskimages-helper: resourceForkLength $0C183060
diskimages-helper: dataForkLength $80010306
diskimages-helper: commentLength $000060C0
diskimages-helper: MacBinary III signature \001\003\006\f (0x0103060C)
diskimages-helper: header CRC $00001830
diskimages-helper: minimum decoder version $0000000C
diskimages-helper: encoder version $00000006
no MacBinary III signature - checking for MacBinary I or IIDIFileEncodingInstantiatorProbe: interface 0, score -1000, CMacBinaryEncoding
DIFileEncodingInstantiatorProbe: probing level 1 interface 1 CAppleSingleEncoding
CBSDBackingStore::openDataFork: /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::openDataFork: about to open /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::getNoFollow: returning 0
CBSDBackingStore::OpenLockFriendly: mapping flags 0x00000002 -> 0x00000026 (locks are MANDATORY)
(RW lock acquired)
CBSDBackingStore::openDataFork: returning 0
00000000: d0ed 0178 0000 0131 00c2 a0f5 4fed 6d07 | ...x...1....O.m. |
00000010: 8840 61c0 8001 0306 180c 3060 c080 0103 | [email protected]`.... |
00000020: 060c 1830 60c0 .... .... .... .... .... | ...0`........... |
CBSDBackingStore::closeDataFork fSIZE = 868220928
CAppleSingleEncoding::isAppleSingleFile loadAppleSingleHeader failed with error 22
DIFileEncodingInstantiatorProbe: interface 1, score -1000, CAppleSingleEncoding
DIFileEncodingInstantiatorProbe: probing level 1 interface 2 CEncryptedEncoding
CBSDBackingStore::openDataFork: /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::openDataFork: about to open /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::getNoFollow: returning 0
CBSDBackingStore::OpenLockFriendly: mapping flags 0x00000002 -> 0x00000026 (locks are MANDATORY)
(RW lock acquired)
CBSDBackingStore::openDataFork: returning 0
CEncryptedEncoding::copyHeaderInformation: inBackingStore->openDataFork returned 0
CEncryptedEncoding::copyHeaderInformation: inBackingStore->getDataForkLength (stub header) returned 0
CEncryptedEncoding::copyHeaderInformation: backingStore data fork length is 868220928
CEncryptedEncoding::copyHeaderInformation: reading V1 header from offset 868219652
CEncryptedEncoding::copyHeaderInformation: inBackingStore->readDataFork (stub header) returned 0
CEncryptedEncoding::copyHeaderInformation: not recognized as v1 header
CEncryptedEncoding::copyHeaderInformation: reading V2 header from offset 0
CEncryptedEncoding::copyHeaderInformation: inBackingStore->readDataFork (stub header) returned 0
CEncryptedEncoding::copyHeaderInformation: not recognized as v2 header
CBSDBackingStore::closeDataFork fSIZE = 868220928
(null)
DIFileEncodingInstantiatorProbe: interface 2, score -1000, CEncryptedEncoding
DIFileEncodingInstantiatorProbe: nothing to select.
DIFileEncodingNewWithBackingStore: probe fails to find appropriate CFileEncoding class.
DIFileEncodingNewWithBackingStore: returning 0x0000006B
DIResolveURLToBackingStore: level 1 encoding match failed. 107.
(continuing)
DIResolveURLToBackingStore: processing level 2 encodings.
DIFileEncodingNewWithBackingStore: entry for encoding level 2
DIFileEncodingInstantiatorProbe: entry for level 2
image-path: /Users/Jeff/Jeff Projects.dmg
enable-keychain: true
DIFileEncodingInstantiatorProbe: probing level 2 interface 0 CUDIFEncoding
CBSDBackingStore::openDataFork: /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::openDataFork: about to open /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::getNoFollow: returning 0
CBSDBackingStore::OpenLockFriendly: mapping flags 0x00000002 -> 0x00000026 (locks are MANDATORY)
(RW lock acquired)
CBSDBackingStore::openDataFork: returning 0
CBSDBackingStore::openDataFork: /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::openDataFork: returning 0
CBSDBackingStore::openDataFork: /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::openDataFork: returning 0
CBSDBackingStore::closeDataFork fSIZE = 868220928
CUDIFEncoding::newProbe: failing because backing store is not UDIF file
DIFileEncodingInstantiatorProbe: interface 0, score -1000, CUDIFEncoding
DIFileEncodingInstantiatorProbe: nothing to select.
DIFileEncodingNewWithBackingStore: probe fails to find appropriate CFileEncoding class.
DIFileEncodingNewWithBackingStore: returning 0x0000006B
DIResolveURLToBackingStore: level 2 encoding match failed. 107.
(continuing)
DIResolveURLToBackingStore: processing level 3 encodings.
DIFileEncodingNewWithBackingStore: entry for encoding level 3
DIFileEncodingInstantiatorProbe: entry for level 3
image-path: /Users/Jeff/Jeff Projects.dmg
enable-keychain: true
DIFileEncodingInstantiatorProbe: probing level 3 interface 0 CSegmentedNDIFEncoding
checkTypeCreator: /
checkTypeCreator: returning , score 0
CSegmentedNDIFEncoding::isSegmentedNDIFFile checkTypeCreator failed
DIFileEncodingInstantiatorProbe: interface 0, score -1000, CSegmentedNDIFEncoding
DIFileEncodingInstantiatorProbe: probing level 3 interface 1 CSegmentedUDIFEncoding
CSegmentedUDIFEncoding::isSegmentedUDIFFile backing store is not of type CUDIFEncoding
DIFileEncodingInstantiatorProbe: interface 1, score -1000, CSegmentedUDIFEncoding
DIFileEncodingInstantiatorProbe: probing level 3 interface 2 CSegmentedUDIFRawEncoding
CSegmentedUDIFRawEncoding::isSegmentedUDIFRawFile looking for segment 2 "file://localhost/Users/Jeff/Jeff%20Projects.002.dmgpart"
DIIsInitialized: returning YES
DIBackingStoreNewWithCFURL: entry with
file://localhost/Users/Jeff/Jeff%20Projects.002.dmgpart
image-path: /Users/Jeff/Jeff Projects.dmg
enable-keychain: true
DIBackingStoreInstantiatorProbe: entry
file://localhost/Users/Jeff/Jeff%20Projects.002.dmgpart
image-path: /Users/Jeff/Jeff Projects.dmg
enable-keychain: true
DIBackingStoreInstantiatorProbe: probing interface 0 CBSDBackingStore
CBSDBackingStore::newProbe stat() failed. No such file or directory.
CBSDBackingStore::newProbe score 1 for file://localhost/Users/Jeff/Jeff%20Projects.002.dmgpart
DIBackingStoreInstantiatorProbe: interface 0, score 1, CBSDBackingStore
DIBackingStoreInstantiatorProbe: probing interface 1 CBundleBackingStore
CBundleBackingStore::newProbe score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.002.dmgpart
DIBackingStoreInstantiatorProbe: interface 1, score -1000, CBundleBackingStore
DIBackingStoreInstantiatorProbe: probing interface 2 CRAMBackingStore
CRAMBackingStore::probe: scheme "file": not ram: or ramdisk: scheme.
CRAMBackingStore::probe: score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.002.dmgpart
DIBackingStoreInstantiatorProbe: interface 2, score -1000, CRAMBackingStore
DIBackingStoreInstantiatorProbe: probing interface 3 CCarbonBackingStore
CCarbonBackingStore::newProbe stat() failed. No such file or directory.
CCarbonBackingStore::newProbe score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.002.dmgpart
DIBackingStoreInstantiatorProbe: interface 3, score -1000, CCarbonBackingStore
DIBackingStoreInstantiatorProbe: probing interface 4 CDevBackingStore
CDevBackingStore::newProbe: not /dev/disk or /dev/rdisk (/Users/Jeff/Jeff Projects.002.dmgpart).CDevBackingStore::newProbe score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.002.dmgpart
DIBackingStoreInstantiatorProbe: interface 4, score -1000, CDevBackingStore
DIBackingStoreInstantiatorProbe: probing interface 5 CCURLBackingStore
CCURLBackingStore::probe: scheme is: file
CCURLBackingStore::probe: not recognized URL scheme.
CCURLBackingStore::probe: score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.002.dmgpart
DIBackingStoreInstantiatorProbe: interface 5, score -1000, CCURLBackingStore
DIBackingStoreInstantiatorProbe: probing interface 6 CVectoredBackingStore
CVectoredBackingStore::newProbe not "vectored" scheme.
CVectoredBackingStore::newProbe score -1000 for file://localhost/Users/Jeff/Jeff%20Projects.002.dmgpart
DIBackingStoreInstantiatorProbe: interface 6, score -1000, CVectoredBackingStore
DIBackingStoreInstantiatorProbe: selecting CBSDBackingStore
DIBackingStoreNewWithCFURL: CBSDBackingStore
DIBackingStoreNewWithCFURL: instantiator returned 2
DIBackingStoreNewWithCFURL: returning 0x00000002
DIResolveURLToBackingStore: unable to resolve to any backing store class. 2.
CSegmentedUDIFRawEncoding::isSegmentedUDIFRawFile failed because could not find second segment.
DIFileEncodingInstantiatorProbe: interface 2, score -1000, CSegmentedUDIFRawEncoding
DIFileEncodingInstantiatorProbe: nothing to select.
DIFileEncodingNewWithBackingStore: probe fails to find appropriate CFileEncoding class.
DIFileEncodingNewWithBackingStore: returning 0x0000006B
DIResolveURLToBackingStore: level 3 encoding match failed. 107.
(continuing)
DIIsInitialized: returning YES
DIDiskImageNewWithBackingStore: entry with
image-path: /Users/Jeff/Jeff Projects.dmg
enable-keychain: true
DIDiskImageInstantiatorProbe: entry
image-path: /Users/Jeff/Jeff Projects.dmg
enable-keychain: true
DIDiskImageInstantiatorProbe: probing interface 0 CDARTDiskImage
DIDiskImageInstantiatorProbe: interface 0, score 0, CDARTDiskImage
DIDiskImageInstantiatorProbe: probing interface 1 CDiskCopy42DiskImage
DIDiskImageInstantiatorProbe: interface 1, score 0, CDiskCopy42DiskImage
DIDiskImageInstantiatorProbe: probing interface 2 CNDIFDiskImage
checkTypeCreator: /
checkTypeCreator: returning , score 0
CNDIFDiskImage::checkExtension: dmg
CNDIFDiskImage::newProbe: checkExtension gives score -1000.
DIDiskImageInstantiatorProbe: interface 2, score -1000, CNDIFDiskImage
DIDiskImageInstantiatorProbe: probing interface 3 CUDIFDiskImage
CUDIFDiskImage::checkBackingStoreType: backing store is wrong type
DIDiskImageInstantiatorProbe: interface 3, score -1000, CUDIFDiskImage
DIDiskImageInstantiatorProbe: probing interface 5 CRawDiskImage
checkBackingStoreType returned score 0 type
checkTypeCreator returned score 0 type
CRawDiskImage::checkExtension: dmg
checkExtension returned score 100 type WRDU
CBSDBackingStore::setPermission: opening /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::OpenLockFriendly: mapping flags 0x00000000 -> 0x00000014 (locks are MANDATORY)
(RO lock acquired)
CBSDBackingStore::setPermission: kDI_PERM_READONLY granted
CBSDBackingStore::openDataFork: /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::openDataFork: about to open /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::getNoFollow: returning 0
CBSDBackingStore::OpenLockFriendly: mapping flags 0x00000000 -> 0x00000014 (locks are MANDATORY)
(RO lock acquired)
CBSDBackingStore::openDataFork: returning 0
===== iso scan =====
(null)
(null)
===============================
none
0:
partition-name: whole disk
partition-start: 0
partition-synthesized: true
partition-length: 1695744
partition-hint: unknown partition
block-size: 512
burnable: false
appendable: false
CBSDBackingStore::closeDataFork fSIZE = 868220928
CRawDiskImage::checkExtension: dmg
CRawDiskImage: checkExtension returns score 100
DIDiskImageInstantiatorProbe: interface 5, score 100, CRawDiskImage
DIDiskImageInstantiatorProbe: probing interface 6 CShadowedDiskImage
DIDiskImageInstantiatorProbe: interface 6, score -100, CShadowedDiskImage
DIDiskImageInstantiatorProbe: probing interface 7 CSparseDiskImage
CSparseDiskImage::checkExtension: dmg
CBSDBackingStore::openDataFork: /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::openDataFork: about to open /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::getNoFollow: returning 0
CBSDBackingStore::OpenLockFriendly: mapping flags 0x00000000 -> 0x00000014 (locks are MANDATORY)
(RO lock acquired)
CBSDBackingStore::openDataFork: returning 0
CBSDBackingStore::closeDataFork fSIZE = 868220928
DIDiskImageInstantiatorProbe: interface 7, score 0, CSparseDiskImage
DIDiskImageInstantiatorProbe: probing interface 8 CSparseBundleDiskImage
CSparseBundleDiskImage::checkExtension: dmg
CSparseBundleDiskImage::newProbe: returning 0
DIDiskImageInstantiatorProbe: interface 8, score 0, CSparseBundleDiskImage
DIDiskImageInstantiatorProbe: probing interface 9 CCFPlugInDiskImage
DIDiskImageInstantiatorProbe: interface 9, score -1000, CCFPlugInDiskImage
DIDiskImageInstantiatorProbe: probing interface 10 CWrappedDiskImage
DIDiskImageInstantiatorProbe: interface 10, score -100, CWrappedDiskImage
DIDiskImageInstantiatorProbe: selecting CRawDiskImage
DIDiskImageNewWithBackingStore: CRawDiskImage
checkBackingStoreType returned score 0 type
checkTypeCreator returned score 0 type
CRawDiskImage::checkExtension: dmg
checkExtension returned score 100 type WRDU
CBSDBackingStore::setPermission: opening /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::OpenLockFriendly: mapping flags 0x00000002 -> 0x00000026 (locks are MANDATORY)
(RW lock acquired)
CBSDBackingStore::setPermission: kDI_PERM_READWRITE granted.
CBSDBackingStore::openDataFork: /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::openDataFork: about to open /Users/Jeff/Jeff Projects.dmg
CBSDBackingStore::getNoFollow: returning 0
CBSDBackingStore::OpenLockFriendly: mapping flags 0x00000002 -> 0x00000026 (locks are MANDATORY)
(RW lock acquired)
CBSDBackingStore::openDataFork: returning 0
DIDiskImageNewWithBackingStore: instantiator returned 0
DIDiskImageNewWithBackingStore: returning 0x00000000
2011-10-10 13:30:57.258 diskimages-helper[440:2003] DIHelperAttach: performOperation: resolving shadow/section options
2011-10-10 13:30:57.258 diskimages-helper[440:2003] resolveShadowAndSectionOptions: returned 0
2011-10-10 13:30:57.258 diskimages-helper[440:2003] DIHelperAttach: performOperation: checking in-use (1)
DIBackingStore::inUse: this->_fUniqueID
0: d234881026:i2592177
DI_kextCreateDiskImageIdentifierArray: exiting
0:
writeable-components: -
Did a backup & erased hard disk - Now need to recover the .dmg file? How?
Hi there.... thanks for your help!
I used Carbon Copy Cloner (found on versiontracker.com) to make a complete .dmg backup of an entire Powerbook G4. I copied the 28GB .dmg file via ethernet to my Time Capsule and that worked just fine.
I did a 7-pass secure erase on a the PB and have booted up from Tiger OS discs, but cannot find a way to access the Time Capsule to restore the machine.
How do I do this??
Thanks again!
DLI think I figured it out!
I restarted the Powerbook with a Firewire 400 cable attached, I realized that I could select "T" on the keyboard and make it a target drive. I mounted it on my machine, which is connected via ethernet to my Time Capsule (Aiport is much too slow...). From my computer, I went to Disc Utility and restored the .dmg file from the Time Capsule to the connected Powerbook.
It seems to be working....
DL -
How to recover corrupt dmg partition
Somehow I have corrupted a dmg partition in trying to increase the space of the partition. When clicking on the partition in Finder it asks for password but then says "no mountable file systems". Any clues on recovery? Mac Book Pro OSX 10.7.5
Hi..
I too had faced the same problem and used this partition recovery software to recover my deleted partition. This is the
best partition recovery software. You can also
download and check the recovery results. -
Recover corrupted sequence file
help with recover sequence file corrupted.I change the value in a pre expression and the computer just reset.
and the corrupted file message appears. I have a lot of locals, fileglobal and pre-expressions...
Attachments:
Vial1.seq 83 KBTo trout00 -
Typically if an action taken inside an application causes a computer reset, this suggests that the OS is hitting some sort of kernel level exception. The OS is not giving you a blue screen but instead it is set to auto reset.
Right click on the My Computer icon on your desktop and select Properties. On the System Properties dialog box, take a look at the Startup and Recovery settings located on the Advanced tab.
I suspect that some sort of event log will be registered in this case.
Kernel level exceptions typically occur when hardware drivers or low level services error or have a bug. In the case of the sequence editor, none of its code is low level, so any error the program causes would just cause the applicati
on to shutdown, not the OS.
With this in mind, it suggests that you might have a hardware problem with the computer system.
See if the event log gives you any additional information.
Scott Richardson (NI)
Scott Richardson
National Instruments -
How to recover corrupt USB files?
my USB flash drive stopped working today, when i try to verify it on disk utility, i get this message:
** /dev/disk1s1
can't open (no such file or directory)
error: filesystem verify or repair failed
i tried disk drill, wondershare, and stellar phoenix and none of them recognize my flash drive.
any advice on how to recover my files?Here are the simple steps to repair data file in QuickBooks.
Step 1: Close the software as soon as you receive damaged data file error message.
Step 2: Now open the software. It will make a new Qbwin.log file.
Step 3: Click on the ‘Window’ option and then from the drop-down menu, click on ‘Close All’. Now go the ‘File’ option then from the drop-down menu, click on ‘Utilities’. A menu will appear.
Step 4: From that list select ‘Verify Data’. If QuickBooks reports that there is no issue it means your data is alright. On the other side, if you get a message saying “Your data has lost integrity” or “A data problem prevents QuickBooks from continuing” it
means your data is corrupted or has a structural issue. And in this case, you will have to run the Rebuild Data tool.
Step 5: Click on ‘Windows’ and select ‘Close All’ in order to close all the QuickBooks windows.
Step 6: To launch the Rebuild Data tool, click on ‘File’ and select ‘Utilities’. Now from the drop-down menu, go to ‘Rebuild Data’ option.
Step 7: Click on ‘OK’ and a pop-up will come warning you to take a backup of your file. It is recommended to create an entirely new backup file and don’t overwrite the existing file. To prevent overwriting, give a new name to the file when prompted.
Click 8: Wait for some time and let the Rebuild Data Utility finish the process. When completed, click on ‘OK’.
Step 9: Close the company file. Reopen the file to refresh the list.
Step 10: Select the company file and now to launch the file, click on ‘Open’.
Step 11: In order to verify if the data file is clean and is repaired, again run the Verify Data utility.
Content From- http://supportforquickbooks.iyogi.com/troubleshooting/repair-quickbooks-data-file.html -
Recover Corrupted Project file
I got this message when trying to load a WIP file: "The project could not be loaded, it may be damaged or contain outdated elements."
I've searched the forums as well as on other sources on how to deal with it. So far I've tried:
1. Check files on AutoSave folder. No luck. All 5 files gave the same message
2. Fix XML with XML wrench. Tried the "Check is Well Formed" & "Check is Valid" and both said ok"
3. Restarted PC. Same thing.
4. Move project and working files to other folders - same.
5. Created a blank project and tried to import sequence - no sequence show up.
6. Import from After Effects and Exported - no luck as well. Came up with a message saying there's no valid sequence.
Would appreciate if anyone can help look into my project file to see if this is salvagable. The file looks ok, but it just won't load for some reason.
https://dl.dropboxusercontent.com/u/9542978/MMK%20Interview%2001.prproj
Thanks in advanced for your help.
Some info:
Adobe Premiere Pro 6.0
Windows 7 64bit
Using Plural Eyes pluginFor what's worth, after hours of searching online for a solution and tinkering with the XML file, I managed to figure out how to salvage my project. What I did was to import my file into After Effects, and then single out the sequence I need, then went to Adobe Dynamic Link and created a project file in Premiere. Then I copied the sequence from AE and pasted it into Premiere, and deleted (what I took a while to find out) a screwed up sequence from the project and saved the project and ta-da.. it now opens fine.
I'm still unsure why the 1 or 2 sequence is causing the project to be corrupted, but I don't have the time to investigate as I need to complete this project asap.
Thanks to all that have helped. -
How can i recover corrupt .mov files that quicktime does not recognise?
we recently 'lost' a whole day's footage by accidentally deleting it. in trying to recover these files we have used many different programs and have had odd results.... sometimes the data is recovered and shows only thumbnails but not the proper film and othertimes says tht quick time cannot open the link because it doesn't reconise the codec. these clips were filmed with a Canon SLR camera and we have searched the reformqatted sandisks as well with the same result.... quicktime does not recognize the file.
any thoughts? it would be a tragedy to lose this footage... well not really, but you know - a whole day's work!
thanks in advance for your help.
GabiI managed to rescue damaged AVCHD footage using photorescue. Some files were not complete, but I got them to play by trying different players like VLC, or mpeg streamclip, then exporting the clip as a new same format file. One or two were too badly damaged to rescue, but I got most back eventually.
-
I have a movie file that I can play on my macbook. When sent to someone else to view, I get the error 2002. I tried sending to myself to view on my windows based system and get the same message. I have the most uptodate java, quicktime and have tried all the other fixes recommended for the errors(e.g.tagger and ccleaner). Oh, I have tried importing it into a new project and remaking it, no luck playing it anywhere but on my mac.
Open the file using QuickTime Player.
Open the Movie Inspector window to report what it says about your file. -
Hi there,
I created a DMG which contained everything form my previous install.
Recently I accidentally started deleting all files in my home directory because of sloppy terminal use, so everything in Desktop and Documents was deleted.
I immediately recovered all files I could find and got the bunch. At no point did I restart my computer, before tonight.
So to the issue: I restarted my laptop and then I realised that my backup DMG was located in the documents folder; the only reason I've been able to access all of those files is because the DMG was already mounted.
Is there a way for me to recover the DMG file at this stage?
The file was 55GB and now I have 55GB more free - so I have a bit of hope that all contents might still be there.
Please let me know if you have any tips.
If you want to post articles about good backup policies, feel free, but I do realise I need to revise my setupHighly unlikely having most likely overwritten part of the drive where the file was actually stored. You can see the following:
Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.
Basic Backup
Get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.
Maybe you are looking for
-
My hard-drive crashed, I own Lightroom 5, where can I download it again t re install it. The ADOBE email I had has links that no longer work (thanks for that). Running Windows 7 Home Premium
-
Shift Registers not working properly with counter group .vi
Because I'm not sure how to refer to them as a group. Well, because my previous vi only let my DAQ(STC) model no. 6020E read on one channel, I switched to a new set of .vis. They solved my channel problem, but in exchange, they introduced a set of ne
-
Account Search by Territory ID
Hi, I have set up rule builder where one of the rule is account id. i have manually enter account ID in rule and activated . if i search that account id in territory search the node is showing in the result. but if i search the Account by territory i
-
Can we write Substitution rule during payment document creation
Hi, I have to subsitute a value in a field during f110, is it possible ??
-
Short Dump TSV_TNEW_PAGE_ALLOC_FAILED while using shared memory objects
Hi Gurus, We are using shared memory objects to stor some data which we will be reading later. I have implemented the interfce IF_SHM_BUILD_INSTANCE in root class and using its method BUILD for automatic area structuring. Today our developments moved