Recovering Data from a disabled/passcoded IPhone

My Aunt has had an IPhone for quite some time and she has a lot of data on it. Contacts, photos and so forth. She recently accidentally passcoded the phone and does not know the passcode, so it is more or less disabled now.
Now the big problem, she literally never synced it with a computer.
Is their any way we can recover the data on it? Most of the guides I read would simply wipe it clean in restoring the passcode. She could care less about the phone (would be glad to upgrade to a new one), but she wants the data. The people at the AT&T store were less than helpful and basically said we are screwed.
If anyone has any suggestions let me know. Or even some place that we can send it to recover the data to place on a new phone.
Thank you much.

You need to call AppleCare or make an appointment at an Apple store, not contact AT&T about something like this.
The passcode lock feature is to protect access to data on the iPhone in the event the iPhone is lost or stolen. If it were easy to reset the passcode, it would defeat the purpose.
The iPhone is designed to be synced with iTunes on a computer. iTunes creates and maintains a backup for the iPhone. Although contacts are included with the iPhone's backup along with other data, contacts are designed to be synced with a supported application on your computer. Although photos in the iPhone's Camera Roll are also included with the iPhone's backup, photos can and should be imported by your computer as with any other digital camera. When there are photos in the iPhone's Camera Roll, the iPhone is also detected as a digital camera when connected to your computer.
The passcode lock is not included with the iPhone's backup. Had this iPhone been synced with iTunes on a computer on a regular basis as designed and intended, the iPhone could be restored with iTunes from the iPhone's backup.

Similar Messages

My iphone 4 is dead with water damage. Is there a way to recover data from the dead phone.

My iphone 4 is dead with water damage. Is there a way to recover data from the dead phone. Could any one help where exectly the memory chip (not RAM) resides in the phone. Is it on the motherboard or a seperate component in the phone?

The iPhone's internal components are soldered together. There is no way to recover data from your phone if it refuses to power up.
~Lyssa

How do I recover Apps Data from the iCloud on iPhone 4S with IOS 6.1?

How do I recover Apps Data from the iCloud on iPhone 4S with IOS 6.1?

You would have to restore to your entire iCloud backup, if you have one. (The backup includes app data.) Restoring to an iCloud backup has to be done in the initial setup process. If you have any data on your phone now that is not in the backup that you want to save you'll need to do that first. Then go to Settings>General>Reset and tap Erase All Content and Settings. You will then go through the setup screens as you did when the phone was new. When given the option, choose Restore from iCloud Backup. Be sure you are connected to wifi and your charger as this will take some time to finish.

I just buy a new iphone 4S, i wanna sync my data from 3GS to new iphone but i forget the password for the 3GS

i just buy a new iphone 4S, i wanna sync my data from 3GS to new iphone but i forget the password for the 3GS

Connect your 3GS in recovery mode and restore, you'll get the option to reset the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.

How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
Are the files lost forever or can i recover them by going to a shop or using a software?

Thank you for responding.
This might sound stupid since i'm not really knowledgeable with Macs,
but since all my files were moved from my mac computer to the external hard drive,
is it possible to recover those files through my Mac - like recovering deleted files?

Recovering data from Time Capsule after conversion from Snow Leopard to Lion

Had a problem with my iMac, which was running Snow Leopard O/S. Data was backed up on Time Capsule using Time Machine, although recent back-ups had failed (but earlier back-ups had been OK). Apple support determined that I needed to re-install the O/S and they walked me through it. After blowing away all data (believing that once O/S reinstalled, could recover from Time Capsule), the reinstall failed. Took to Apple store, where they installed Lion at my request. Then tried to recover from Time Capsule, but couldn't do so. Sparse file doesn't work (it shows 10GB, which is wrong as it had several hundred GB's before due to lots of photos). Apple Support couldn't solve issue, believes it was corrupted with the last backup. Ultimately recommended that I have professional data recovery service recover data from the iMac hard-drive (as opposed to Time Capsule). Spoke to recovery service recommended by Apple, and it is very expensive (also, given the O/S reinstall, anything they recover will have new file names and no directory structure). They also said getting data off the Time Capsule is even more difficult and expensive to recover. I'm not a happy camper.
I would welcome any thoughts on what to do. FWIW, I live in South Florida and there appear to be lots of data recovery companies locally, but Apple support had said that they have only a few authorized vendors that can do it without voiding warranty, so I'm reluctant to even call them. Thanks. Steve

Your backups may be corrupted.
Try to repair them, via Disk Utility (in your Applications/Utilities folder).
Mount the sparse bundle by opening the TC in the Finder and double-clicking on the sparse bundle. Drag the sparse bundle into Disk Utility's sidebar, and do a +*Repair Disk*+ (not permissions) on it. If it finds errors it can't fix, run it again (and again), until it either fixes them all, or can't fix any more.

Recovering Data from a dead iMac G5

My iMAC G5 has had it's second logic board failure in the past 1.5 years. The repair shop says it's going to cost $550 to repair, and Apple's not going to cover a 2nd board replacement under the extension program. Given that the computer's 4 years old, and was originally only worth $1200, I think I'm going to get a new Mac.
My question is, how do I recover data from the hard drive of the old Mac? I don't want to lose all of my files from iTunes, iPhoto, etc. The Hard Drive is apparently fine, but the Mac won't boot up in its current state. Thanks in advance for your help.

Remove the hard drive and put it in an external hard drive enclosure. Then connect it to your new Mac and recover the files.

Recovering data from HD ????????

Hi
My HD died on my G5 a few months back
I am wondering if it would be possible to recover data from it
The situation is this
I had the idea that maybe if i start up my G5 whilst pressing T & connecting it up to my Macbook Pro via firewire 800 I might see the drives & be able to get files off there
I didnt see the drives on the desktop but if i opened Disk Uility both drives on the G5 Are there
They are both displayed as firewire drives each is named with another name underneath which is greyed out
I can click on each drive but in repair all options "Repair Permisions, Repair disc ETC are greyed out
I then tried to boot my Macbook pro with the installation disc & using disc utility from the installation CD with the same resut
Now if i can get this far I should be able to take it one step further & be able to get data from the HD or am i just grasping at straws
Any Ideas please ??

A. I would suggest never use CD or DVD.
B. Setup a disk drive just for repairs.
C. Get in the habit of using backup like SuperDuper
If you are running Leoaprd, use TimeMachine in addition to SuperDuper. SD makes an update that is bootable. And you want to insure it works.
Data Rescue II from Prosoft sounds like a good idea.
I would pick up a couple drives. A new boot drive, and one for backups, and to recover to. OWC has WD 640GB for $69.
Only use idential drives when creating a RAID, whether stripped or mirror. And yes, some tests treat the volumes rather than the physical mechanism.
SMART is not that helpful. When you tested in DW, it wrote to system log and shows how many spare blocks are left, used, which can be helpful.
TechTool Pro is 4.6.2 (5.0 is out also) and can scan a drive for weak/bad sectors.
You may need multiple backups. An original system and another of your data. When you used RAIDs you need to be doubly sure. And the best way to use maintenance utility is regularly, preventative medicine.

Recovering Data from a truncated table in OraXE?

A funny thing happened, i truncated a table containing BLOBs and other stuff, with over 700 entries!!, now i wanna know if it´s feasible to recover that truncated data, i'm just wondering about it, i know it sounds silly i know, but the storage space didn´t get shorter after the data was truncated from the table, so after this´s been said, can any body explain me what happened, can i retrieved this truncated data that i truncated from the table (without any previous backup)?
Message was edited by:
efebo_abel2002
Message was edited by:
efebo_abel2002
Mensaje editado por:
efebo_abel2002

Truncate simply resets the pointer that marks the 'end of data' in a table to the beginning of the table. The storage is still allocated, on the assumption that you want to reuse the table and want to avoid the overhead associated with extending the table. The system knows there are never any rows past the 'end of data' and it won;t bother looking past that point.
Recovering that data from the actual current database - about as likely as recovering data from the Windows recycle bin when you've set the max allowable storage in the recycle bin to '0'. Technically possible, but needing someone with a lot of experience and patience ... and absolutely no changes to the database after truncate. An expensive proposition.
You have, of course, switched to archive log mode and been taking regular backups. (Have you not?) In which case, a 'point in time' recover, to just before the truncate, would be the solution. This brings back the database (or at least a tablespace) back to a former 'life', and is quite different from restoring a table.

Recovering data from a newly formatted hard drive

Has anyone had any experience with programs that recover data from a newly formatted hard drive? There seem to be a lot of programs out there to do this, but, a) do they work, and b) which one worked best for you?

Ive had so and so success with a freeware utility called "Recuva"
http://www.recuva.com/
Its from the makers of CCleaner.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

How do i recover data from an external hard drive that was accidentally deleted? After I verified the drive, a message appeared that said my drive needed to be repaired. When I tried to access the drive again, the 700 Gigs of music is gone!

How do i recover data from an external hard drive that was accidentally deleted? After I verified the drive, a message appeared that said my drive needed to be repaired. When I tried to access the drive again, the 700 Gigs of music is gone!

Stop using the drive immediately, un plug it.
Buy a copy of ProSoft DataRescue 4 and use it to search for deleted files.

Can I recover data from a reformatted hard drive? I did not do a back up prior to talking to Apple Support and the guy having me delete the hard drive and start anew. My bad but is all lost??

Can I recover data from a reformatted hard drive? I did not complete a back up prior to talking to Apple Support and the guy having me delete the hard drive (10.5.8) and start anew (10.6.3). My bad but is all lost?? Years of very important information....

You will need to purchase reovery sofware such as such as FileSalvage
http://subrosasoft.com/software/filesalvage
You can download a demo copy that will tell you what it can recover
If you want to recover that you must pay for the software then
When you do the recovery, you will need another disk drive to receive the recovered files
Having install a new operating system on the disk after the retformat is going to gradually reduce the amount of data that this software will be able to recover for you
Allan

Recover data from external hard drive that was Windows format and connected on a Macbook Pro. Did I lose everything? What happened?

Hi there this is my first question here!
I connected my external hard drive originally formatted on PC on my new Macbook. The first time I connected it I could see all my files but today I connected it and after I couldn't see any file nor even on my pc appears as NO NAME with a different name and nothing on it. I think was reformatted, any help to recover all my data?
It's really important stuff for me

If the Apple Store couldn't get files off of the drive, it is unlikely that you will be able to. If you have backups, those would be the best way to go. You could also try booting up the computer and holding down T to boot into Target Disk Mode. Plug the broken computer into another one with FireWire and see if it works to recover data from external hard drive. If you can see it, try booting up the broken computer while holding down Option. Choose Recovery HD from the menu, then choose to Reinstall OS X.
It is unlikely that this will work, because I'm pretty sure that the Apple Store would have tried this. You could try using expensive software to get files off the drive, but it would be risky and the results might not be any good.
https://discussions.apple.com/docs/DOC-4273

How to recover data from bad hard drive

Once a hard drive goes bad (cannot get into the computer), is there any hope of recovering any data from it? If so, how?

Do you mean the hard drive is mechanically broken for sure? It's not a data corruption issue that is causing a problem with starting up the Mac, but maybe not be a bad mechanism?
If the drive is definitely broken, there are businesses that specialize in recovering data from bad hard drives. For example
http://www.drivesaversdatarecovery.com/ (I always saw their booth at MacWorld Expos...)
The cost of such services is usually high.
cannot get into the computer
So that probably means the hard drive in question is the internal drive? If you don't know for sure that the hard drive is physically broken, you can try starting up using your Mac OS X installation disc. Insert disc in optical drive and start up with the C key held down. When you get to Installer's screen, go up to the menu bar and run Disk Utility from the Utilities menu. Does the internal drive appear in the Disk Utility sidebar?
Alternately, if you have another Mac (that has FireWire), you can try starting the Mac with the problem in FireWire Target Disk Mode,
http://support.apple.com/kb/HT1661
Connect the "target" Mac to the other Mac (running normally) using a FireWire cable. Run Disk Utility on that Mac. Does the hard drive of the Mac in FireWire Target Disk Mode appear in the sidebar?
If you can get the internal drive to appear in Disk Utility, you may be able to run Repair Disk on the First Aid tab. There are also third-party utilities, such as TechTool Pro (Micromat), Drive Genius (Prosoft), and Disk Warrior (Alsoft), that may be able to fix (or at least recover data from) the hard drive.

How to recover data from a hard drive with bad blocks?

An external hard drive, 4TB Iomega...connected via eSATA cable...had a power outage and the drive won't be read by OSX now. (Yes, it was on a surge protector and no I did not have a backup. I was actually preparing for the process of creating a backup when the power went out!) Anyway, I have tried using Data Rescue 3 and DiskDrill to try and recover data from the drive. I can recover the first 1/3 of the drive, but it ejects when either app tries to access the bad block. Can anyone tell me how/what software to use to recover the data? I know there are programs that will avoid the bad block but I've only found them for Windows. Are there any that will do such a thing in Lion? Any help will be appreciated...and no, I can not afford a data recovery service. Trying to do this on my own.

Basics of File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Recovering Data from a disabled/passcoded IPhone

Similar Messages

Maybe you are looking for