Recovering data from an HD crash via iPod?

I had a hard drive crash and had to install a new drive and could not recover any of the data from the bad drive.
I do however, have the iPod that used to sync with it. I was able to recover the music with Senuti. Does anyone know how to safely recover the Address Book and Calendar?
TIA,
W.

It won't show up under Shared unless it is connected to a different computer. It shows up under Devices if it's connected directly to your computer.
Which computer is it plugged in to?
I tried to drag it into a new folder on my HD.
If you drag from the Sidebar, that is how to remove something from the sidebar.
The drive should show up on the desktop. You can drag that drive back to the Sidebar.
I wouldn't drag the entire drive to a new folder. Double click to open that drive then drag what you want to a new folder.
Since it was replaced as faulty, you may not get anything off of it or it may take a few times to get it to mount or it may never mount.
If it's not showing up, power it down, wait a bit then power it on.

Similar Messages

  • How do I restore old emails from recovered data after hard drive crash?

    Hi all - I used data rescue II to recover data from a crashed hard drive - seems to have worked pretty well, as the file structure seems to be mostly intact - now I'm trying to find the old emails and get them back in my inbox/sent mailboxes where they belong - any help is surely appreciated - thanks

    Hi Tommybanjo.
    Mail stores the messages in .emlx files, but you cannot import individual messages directly, only entire mailboxes. In order to import the recovered .emlx files back into Mail, they must be organized as if they were in an .mbox mailbox, i.e. they must be in a Messages folder within an .mbox folder. You may create a folder called Recovered.mbox, then a Messages folder within this folder, then put the .emlx files within the Messages folder, then import that.
    In Mail, do File > Import Mailboxes, choose Mail for Mac OS X as the data format, and follow the instructions. Note that Mail wants you to select the folder that contains the mailboxes to be imported (i.e. the folder where the .mbox folders to be imported reside), not the .mbox folders themselves nor the Messages folders within them.
    Given the circumstances, however, there could be something wrong with one or more of the recovered messages and that might cause the import to fail. If that’s the case, you may try organizing the recovered messages in several smaller mailboxes and try to identify the messages that Mail has trouble with. Alternatively, you may try using emlx to mbox Converter or Emailchemy to convert the .emlx files to standard mbox format, then import that in Mail as Other.

  • Just had a fatal crash of my new 1TB fusion drive on my 3 month old Imac 27". Is there anyone elese having this issue? And have you been able to recover data from that Crashed Fushion Drive?

    Just had a fatal crash of my new 1TB fusion drive on my 3 month old Imac 27". Is there anyone elese having this issue? And have you been able to recover data from that Crashed Fushion Drive?

    Since it's a new machine, contact Apple's Support, formerly Apple Express Lane and let them deal with it.

  • Recovering data from Time Capsule after conversion from Snow Leopard to Lion

    Had a problem with my iMac, which was running Snow Leopard O/S.  Data was backed up on Time Capsule using Time Machine, although recent back-ups had failed (but earlier back-ups had been OK).  Apple support determined that I needed to re-install the O/S and they walked me through it.  After blowing away all data (believing that once O/S reinstalled, could recover from Time Capsule), the reinstall failed.  Took to Apple store, where they installed Lion at my request.  Then tried to recover from Time Capsule, but couldn't do so.  Sparse file doesn't work (it shows 10GB, which is wrong as it had several hundred GB's before due to lots of photos).  Apple Support couldn't solve issue, believes it was corrupted with the last backup.  Ultimately recommended that I have professional data recovery service recover data from the iMac hard-drive (as opposed to Time Capsule).  Spoke to recovery service recommended by Apple, and it is very expensive (also, given the O/S reinstall, anything they recover will have new file names and no directory structure).  They also said getting data off the Time Capsule is even more difficult and expensive to recover.  I'm not a happy camper. 
    I would welcome any thoughts on what to do.  FWIW, I live in South Florida and there appear to be lots of data recovery companies locally, but Apple support had said that they have only a few authorized vendors that can do it without voiding warranty, so I'm reluctant to even call them.  Thanks.  Steve

    Your backups may be corrupted.
    Try to repair them, via Disk Utility (in your Applications/Utilities folder).
    Mount the sparse bundle by opening the TC in the Finder and double-clicking on the sparse bundle. Drag the sparse bundle into Disk Utility's sidebar, and do a +*Repair Disk*+ (not permissions) on it. If it finds errors it can't fix, run it again (and again), until it either fixes them all, or can't fix any more.

  • Recovering data from HD ????????

    Hi
    My HD died on my G5 a few months back
    I am wondering if it would be possible to recover data from it
    The situation is this
    I had the idea that maybe if i start up my G5 whilst pressing T & connecting it up to my Macbook Pro via firewire 800 I might see the drives & be able to get files off there
    I didnt see the drives on the desktop but if i opened Disk Uility both drives on the G5 Are there
    They are both displayed as firewire drives each is named with another name underneath which is greyed out
    I can click on each drive but in repair all options "Repair Permisions, Repair disc ETC are greyed out
    I then tried to boot my Macbook pro with the installation disc & using disc utility from the installation CD with the same resut
    Now if i can get this far I should be able to take it one step further & be able to get data from the HD or am i just grasping at straws
    Any Ideas please ??

    A. I would suggest never use CD or DVD.
    B. Setup a disk drive just for repairs.
    C. Get in the habit of using backup like SuperDuper
    If you are running Leoaprd, use TimeMachine in addition to SuperDuper. SD makes an update that is bootable. And you want to insure it works.
    Data Rescue II from Prosoft sounds like a good idea.
    I would pick up a couple drives. A new boot drive, and one for backups, and to recover to. OWC has WD 640GB for $69.
    Only use idential drives when creating a RAID, whether stripped or mirror. And yes, some tests treat the volumes rather than the physical mechanism.
    SMART is not that helpful. When you tested in DW, it wrote to system log and shows how many spare blocks are left, used, which can be helpful.
    TechTool Pro is 4.6.2 (5.0 is out also) and can scan a drive for weak/bad sectors.
    You may need multiple backups. An original system and another of your data. When you used RAIDs you need to be doubly sure. And the best way to use maintenance utility is regularly, preventative medicine.

  • How to recover data from a hard drive with bad blocks?

    An external hard drive, 4TB Iomega...connected via eSATA cable...had a power outage and the drive won't be read by OSX now.  (Yes, it was on a surge protector and no I did not have a backup.  I was actually preparing for the process of creating a backup when the power went out!)  Anyway, I have tried using Data Rescue 3 and DiskDrill to try and recover data from the drive.  I can recover the first 1/3 of the drive, but it ejects when either app tries to access the bad block.  Can anyone tell me how/what software to use to recover the data?  I know there are programs that will avoid the bad block but I've only found them for Windows.  Are there any that will do such a thing in Lion?  Any help will be appreciated...and no, I can not afford a data recovery service.  Trying to do this on my own.

    Basics of File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • How do I recover data from my dead hard drive?

    How do I recover data from my dead hard drive?

    Is it dead or corrupt? There are recovery programs out there, however if your HD is head, paying pros to do data recovery is VERY costly.       Some have removed the platters and installed them in likewise drives that dont have head crashes, but torque tolerances are tight, and doing it right is a bit advanced and tricky for most. Ive done HD disk swaps 4 times and had success 3 of the 4 times. It requires cannibalizing another working HD.   In the future remember the golden rule, 2 copies is 1, and one is NONE.
    Its likely you could find a local computer repair station that can do it for you cheaply.  HD dont really "die", they have fried SATA bus, or crashed HEADS........the platters DO demagnatize over long time due to heat and degauss of the data (poor storage, etc).........but in specific, a HARD DRIVE DOESNT DIE ,.........only the flying head mechanisms that read and write the data, and SATA / bus that feeds the data DIES,.......but the data (unless corrupt or magnetically corrupted) is THERE

  • Need to recover data from Bootcamp partition

    Hi, all,
    I recently sent my Macbook Pro in for repairs after a crash (Windows partition not recognized, after working well for a year), and they replaced the logic board and HD, the former of which was dead and the latter of which "wasn't running very well". I got the HD back, and have been trying to get data off it; the problem is, most of my data was stored on my Windows bootcamp partition, which I can now see - but not access.
    This is the info I got off it, since Disk Utility still recognizes it.
    Mount Point : /Volumes/BOOTCAMP
    Capacity : 116.7 GB (125,294,346,240 Bytes)
    Format : Windows NT File System (NTFS)
    Available : 26.6 GB (28,521,467,904 Bytes)
    Used : 90.1 GB (96,772,874,240 Bytes)
    Number of Files : 138,674
    Owners Enabled : No
    Number of Folders : 0
    I feel as if there should be a way to recover data from the drive, since it obviously still...exists and is recognized. But using "verify" in Disk Utility returns a "verify volume failed: invalid request", and I can't otherwise see any files, since there's apparently 0 folders.
    Does anyone have any recommendations for data recovery software that works in Mac? I can't just run Windows from an external drive because the HD with the Bootcamp on it is Mac-formatted.
    Many thanks.

    Probably the best option for attempting to recover files is attaching the hdd to a> USB Adapter and plug it into a usb port an another machine. If the hdd has not failed it should show up as a drive and can be browsed on the other machine to copy files over.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

    How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
    Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
    After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
    So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
    I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
    I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
    I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
    Are the files lost forever or can i recover them by going to a shop or using a software?

    Thank you for responding.
    This might sound stupid since i'm not really knowledgeable with Macs,
    but since all my files were moved from my mac computer to the external hard drive,
    is it possible to recover those files through my Mac - like recovering deleted files? 

  • Recovering Data from a dead iMac G5

    My iMAC G5 has had it's second logic board failure in the past 1.5 years. The repair shop says it's going to cost $550 to repair, and Apple's not going to cover a 2nd board replacement under the extension program. Given that the computer's 4 years old, and was originally only worth $1200, I think I'm going to get a new Mac.
    My question is, how do I recover data from the hard drive of the old Mac? I don't want to lose all of my files from iTunes, iPhoto, etc. The Hard Drive is apparently fine, but the Mac won't boot up in its current state. Thanks in advance for your help.

    Remove the hard drive and put it in an external hard drive enclosure. Then connect it to your new Mac and recover the files.

  • Recovering Data from a truncated table in OraXE?

    A funny thing happened, i truncated a table containing BLOBs and other stuff, with over 700 entries!!, now i wanna know if it´s feasible to recover that truncated data, i'm just wondering about it, i know it sounds silly i know, but the storage space didn´t get shorter after the data was truncated from the table, so after this´s been said, can any body explain me what happened, can i retrieved this truncated data that i truncated from the table (without any previous backup)?
    Message was edited by:
    efebo_abel2002
    Message was edited by:
    efebo_abel2002
    Mensaje editado por:
    efebo_abel2002

    Truncate simply resets the pointer that marks the 'end of data' in a table to the beginning of the table. The storage is still allocated, on the assumption that you want to reuse the table and want to avoid the overhead associated with extending the table. The system knows there are never any rows past the 'end of data' and it won;t bother looking past that point.
    Recovering that data from the actual current database - about as likely as recovering data from the Windows recycle bin when you've set the max allowable storage in the recycle bin to '0'. Technically possible, but needing someone with a lot of experience and patience ... and absolutely no changes to the database after truncate. An expensive proposition.
    You have, of course, switched to archive log mode and been taking regular backups. (Have you not?) In which case, a 'point in time' recover, to just before the truncate, would be the solution. This brings back the database (or at least a tablespace) back to a former 'life', and is quite different from restoring a table.

  • Recovering data from a newly formatted hard drive

    Has anyone had any experience with programs that recover data from a newly formatted hard drive?  There seem to be a lot of programs out there to do this, but, a) do they work, and b) which one worked best for you? 

    Ive had so and so success with a freeware utility called "Recuva"
    http://www.recuva.com/
    Its from the makers of CCleaner.
    *******DISCLAIMER********
    I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

  • How do i recover data from an external hard drive that was accidentally deleted?  After I verified the drive, a message appeared that said my drive needed to be repaired.  When I tried to access the drive again, the 700 Gigs of music is gone!

    How do i recover data from an external hard drive that was accidentally deleted?  After I verified the drive, a message appeared that said my drive needed to be repaired.  When I tried to access the drive again, the 700 Gigs of music is gone!

    Stop using the drive immediately, un plug it.
    Buy a copy of ProSoft DataRescue 4 and use it to search for deleted files.

  • Can I recover data from a reformatted hard drive?  I did not do a back up prior to talking to Apple Support and the guy having me delete the hard drive and start anew.  My bad but is all lost??

    Can I recover data from a reformatted hard drive?  I did not complete a back up prior to talking to Apple Support and the guy having me delete the hard drive (10.5.8) and start anew (10.6.3).  My bad but is all lost?? Years of very important information....

    You will need to purchase reovery sofware such as such as FileSalvage
    http://subrosasoft.com/software/filesalvage
    You can download a demo copy that will tell you what it can recover
    If you want to recover that you must pay for the software then
    When you do the recovery, you will need another disk drive to receive the recovered files
    Having install a new operating system on the disk after the retformat is going to gradually reduce the amount of data that this software will be able to recover for you
    Allan

  • Recover data from external hard drive that was Windows format and connected on a Macbook Pro. Did I lose everything? What happened?

    Hi there this is my first question here!
    I connected my external hard drive originally formatted on PC on my new Macbook. The first time I connected it I could see all my files but today I connected it and after I couldn't see any file nor even on my pc appears as NO NAME with a different name and nothing on it. I think was reformatted, any help to recover all my data?
    It's really important stuff for me

    If the Apple Store couldn't get files off of the drive, it is unlikely that you will be able to. If you have backups, those would be the best way to go. You could also try booting up the computer and holding down T to boot into Target Disk Mode. Plug the broken computer into another one with FireWire and see if it works to recover data from external hard drive. If you can see it, try booting up the broken computer while holding down Option. Choose Recovery HD from the menu, then choose to Reinstall OS X.
    It is unlikely that this will work, because I'm pretty sure that the Apple Store would have tried this. You could try using expensive software to get files off the drive, but it would be risky and the results might not be any good.
    https://discussions.apple.com/docs/DOC-4273

Maybe you are looking for