Recovering Data from an odb file found on a Dell X51 mobile device.

I have had a db get over written that wasn't getting backed up and now all I have to recover from is an Ora 10g LIte R2 odb file recovered from a Dell Axim X51. I am wondering what is the best way to recover this data from the odb file.
Thank you.

If you have all your odb files + conscli.odb + polite.txt files recovered, you could try to sync the databases from another device. just install oracle lite on some other device, copy all the *.odb + polite.txt into \orace directory on the device and setup odbc.txt file according to your databases (you can use odbc.txt from the crashed device if you also restored it). Then you can try to sync the device - the modified data should be send to server.
If you wasn't able to restore the conscli.odb file, you'll probably have to write some custom application which will export the data you need...

Similar Messages

  • How to recover data from .bkf files made when os was XP Proffesional into the system when it is windows7

    Hello Sir/Madam,
    Previously I was using Microsoft Wndows XP Professional,with version: 5.1.2600 Service Pack 3 Build 2600.
    I took .bkf files by using the Backup utility (i.e. Start -> All Programs -> Accessories -> System Tools and then click Backup)
    And paste it to my external hard disk.
    Then I used OS :Microsoft Windows 7 Professional(Version 6.1.7600 Build 7600).I formated my system deleted all the partitions and created new partions and installed Windows 7.
    Now I have the .bfk files in my external hard disk and I want to recover my data from that .bfk files made from xp-sp3 pc to windows 7.
    Plz help me.....
    I downloaded Windows NT Backup - Restore Utility and tried to install NtBackupRestore_x86.msi .But it will not installed in Windows 7 with a message that this requires Removable Storage Management. Since RSM is not included in Windows 7 how does
    one access old Backups from Windows XP?
    Will the NtBackupRestore program be updated to be compatible with Windows 7? plz help................................

    Yes, you need to first install Removable Storage Management software before installing NT-Backup.exe in Windows 7. To know more about restoring backup file, you can read this post: http://belanalavade.blog.com/2014/04/15/how-to-repair-damaged-bkf-file/
    Berdooook
    No.  You do not need to install Removable Storage Management in Windows 7 to read NT backups!
    You go to http://support.microsoft.com/kb/974674 and download the package for Windows 7 that Microsoft has published specifically for this!
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

    How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
    Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
    After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
    So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
    I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
    I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
    I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
    Are the files lost forever or can i recover them by going to a shop or using a software?

    Thank you for responding.
    This might sound stupid since i'm not really knowledgeable with Macs,
    but since all my files were moved from my mac computer to the external hard drive,
    is it possible to recover those files through my Mac - like recovering deleted files? 

  • How to recover data from a hard drive with bad blocks?

    An external hard drive, 4TB Iomega...connected via eSATA cable...had a power outage and the drive won't be read by OSX now.  (Yes, it was on a surge protector and no I did not have a backup.  I was actually preparing for the process of creating a backup when the power went out!)  Anyway, I have tried using Data Rescue 3 and DiskDrill to try and recover data from the drive.  I can recover the first 1/3 of the drive, but it ejects when either app tries to access the bad block.  Can anyone tell me how/what software to use to recover the data?  I know there are programs that will avoid the bad block but I've only found them for Windows.  Are there any that will do such a thing in Lion?  Any help will be appreciated...and no, I can not afford a data recovery service.  Trying to do this on my own.

    Basics of File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • Trying Recover Data from an In Progress Sparsebundle

    My Time Machine backup was in progress when my hard drive in my iMac failed. Long story short, the hard drive in the iMac has been fixed, but now I am trying to recover data from the Time Machine backup. The sparsebundle was corrupt. I was able to repair it using Disk Utility and Diskwarrior.
    I've scoured the web but haven't found a resolution to my exact issue. I've tried the "open other backup disks" from Time Machine, have tried migration assistant, etc. Nothing works. From what I can tell I should be able to manually get to the files, but there is where I get stuck.
    I am able to double-click the file and get the "Time Machine Backups" disk. When I open this I see the sparsebundle in progress. I right-click to show package contents, open Backups.backupdb and I see the bands of folders. When I look in each band, I see a "Macintosh HD" folder in each one, but it is grayed out and I can't open it. I'm assuming the files I need are in there, but I can't figure out how to get in there.
    Any ideas out there?
    Thanks!

    Okay, I right-clicked and created an alias which enabled me to get into the folder. Bizarre. Anyway, I'm good and in the process of restoring files.

  • Recovering data from Time Capsule after conversion from Snow Leopard to Lion

    Had a problem with my iMac, which was running Snow Leopard O/S.  Data was backed up on Time Capsule using Time Machine, although recent back-ups had failed (but earlier back-ups had been OK).  Apple support determined that I needed to re-install the O/S and they walked me through it.  After blowing away all data (believing that once O/S reinstalled, could recover from Time Capsule), the reinstall failed.  Took to Apple store, where they installed Lion at my request.  Then tried to recover from Time Capsule, but couldn't do so.  Sparse file doesn't work (it shows 10GB, which is wrong as it had several hundred GB's before due to lots of photos).  Apple Support couldn't solve issue, believes it was corrupted with the last backup.  Ultimately recommended that I have professional data recovery service recover data from the iMac hard-drive (as opposed to Time Capsule).  Spoke to recovery service recommended by Apple, and it is very expensive (also, given the O/S reinstall, anything they recover will have new file names and no directory structure).  They also said getting data off the Time Capsule is even more difficult and expensive to recover.  I'm not a happy camper. 
    I would welcome any thoughts on what to do.  FWIW, I live in South Florida and there appear to be lots of data recovery companies locally, but Apple support had said that they have only a few authorized vendors that can do it without voiding warranty, so I'm reluctant to even call them.  Thanks.  Steve

    Your backups may be corrupted.
    Try to repair them, via Disk Utility (in your Applications/Utilities folder).
    Mount the sparse bundle by opening the TC in the Finder and double-clicking on the sparse bundle. Drag the sparse bundle into Disk Utility's sidebar, and do a +*Repair Disk*+ (not permissions) on it. If it finds errors it can't fix, run it again (and again), until it either fixes them all, or can't fix any more.

  • How to retrive the data from a sqlite file(.db3) in windows phone 8.1(runtime)

    hey guys
    i installed the sqlite and sqlite-net as requested in other answers i found, changed to x86, and add the .db3 file in my project.
    but the problem is how to retrive the data that already in the file( i am not creating any table or data in the app, just read)
    all the answer i found is to create a table first and then read the table, i tried to skip the step of creating a table, and read from the table directly, but failed with " no such table", by the way, i set the property of the .db3 file as "content",
    "copy if newer"
    can anyone please help? i appreciate that !

    Hello,
    From your description, you want to read data from available sqlite file. When you add the sqlite file into your project, you need to change the sqlite file build action to content. After deploying to device, the sqlite file is located in installation folder,
    you need to copy that file into storage folder before reading data. Please try the following code snippets.
    private async void Button_Click_9(object sender, RoutedEventArgs e)
    //check if file exists in storage folder, and then copy to local storage
    bool flag = await FileExistsAsync("Data.db3");
    if (!flag)
    var folder = await Package.Current.InstalledLocation.GetFileAsync("Data.db3");
    await folder.CopyAsync(Windows.Storage.ApplicationData.Current.LocalFolder);
    // open sqlite and read data
    public async Task<bool> FileExistsAsync(string fileName)
    try
    await Windows.Storage.ApplicationData.Current.LocalFolder.GetFileAsync(fileName);
    return true;
    catch (FileNotFoundException)
    return false;
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
    the survey.

  • Recovering Data from a dead iMac G5

    My iMAC G5 has had it's second logic board failure in the past 1.5 years. The repair shop says it's going to cost $550 to repair, and Apple's not going to cover a 2nd board replacement under the extension program. Given that the computer's 4 years old, and was originally only worth $1200, I think I'm going to get a new Mac.
    My question is, how do I recover data from the hard drive of the old Mac? I don't want to lose all of my files from iTunes, iPhoto, etc. The Hard Drive is apparently fine, but the Mac won't boot up in its current state. Thanks in advance for your help.

    Remove the hard drive and put it in an external hard drive enclosure. Then connect it to your new Mac and recover the files.

  • Recovering data from HD ????????

    Hi
    My HD died on my G5 a few months back
    I am wondering if it would be possible to recover data from it
    The situation is this
    I had the idea that maybe if i start up my G5 whilst pressing T & connecting it up to my Macbook Pro via firewire 800 I might see the drives & be able to get files off there
    I didnt see the drives on the desktop but if i opened Disk Uility both drives on the G5 Are there
    They are both displayed as firewire drives each is named with another name underneath which is greyed out
    I can click on each drive but in repair all options "Repair Permisions, Repair disc ETC are greyed out
    I then tried to boot my Macbook pro with the installation disc & using disc utility from the installation CD with the same resut
    Now if i can get this far I should be able to take it one step further & be able to get data from the HD or am i just grasping at straws
    Any Ideas please ??

    A. I would suggest never use CD or DVD.
    B. Setup a disk drive just for repairs.
    C. Get in the habit of using backup like SuperDuper
    If you are running Leoaprd, use TimeMachine in addition to SuperDuper. SD makes an update that is bootable. And you want to insure it works.
    Data Rescue II from Prosoft sounds like a good idea.
    I would pick up a couple drives. A new boot drive, and one for backups, and to recover to. OWC has WD 640GB for $69.
    Only use idential drives when creating a RAID, whether stripped or mirror. And yes, some tests treat the volumes rather than the physical mechanism.
    SMART is not that helpful. When you tested in DW, it wrote to system log and shows how many spare blocks are left, used, which can be helpful.
    TechTool Pro is 4.6.2 (5.0 is out also) and can scan a drive for weak/bad sectors.
    You may need multiple backups. An original system and another of your data. When you used RAIDs you need to be doubly sure. And the best way to use maintenance utility is regularly, preventative medicine.

  • Reading data from an excel file

    Hi,
    I want to read data from the excel file and display it in
    jsp page. Iam getting the following error:
    [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    Connection con =
    DriverManager.getConnection("jdbc:odbc:mydsn","","");
    Statement st = con.createStatement();
    ResultSet rs = st.executeQuery("select * from [holidays$]");
    Here i have created the dsn with the name "mydsn". I have the
    following data in the mydsn.dsn file:
    [ODBC]
    DRIVER=Microsoft Excel Driver (*.xls)
    UID=admin
    UserCommitSync=Yes
    Threads=3
    SafeTransactions=0
    ReadOnly=1
    PageTimeout=5
    MaxScanRows=8
    MaxBufferSize=2048
    FIL=excel 8.0
    DriverId=790
    DefaultDir=D:\WorkSpace\Projects\VINET\devl\webroot\jsp
    DBQ=D:\WorkSpace\Projects\VINET\devl\webroot\jsp\list_of_holidays_2003.xls
    thanks in advance
    phani.

    You might want to look at the POI project (an open source Jakarta sub-project) that allows you to create/modify/read excel files via Java code. That might be more flexible and easier than what you're currently trying to do.
    Cheers

  • How do i recover data from an external hard drive that was accidentally deleted?  After I verified the drive, a message appeared that said my drive needed to be repaired.  When I tried to access the drive again, the 700 Gigs of music is gone!

    How do i recover data from an external hard drive that was accidentally deleted?  After I verified the drive, a message appeared that said my drive needed to be repaired.  When I tried to access the drive again, the 700 Gigs of music is gone!

    Stop using the drive immediately, un plug it.
    Buy a copy of ProSoft DataRescue 4 and use it to search for deleted files.

  • Can I recover data from a reformatted hard drive?  I did not do a back up prior to talking to Apple Support and the guy having me delete the hard drive and start anew.  My bad but is all lost??

    Can I recover data from a reformatted hard drive?  I did not complete a back up prior to talking to Apple Support and the guy having me delete the hard drive (10.5.8) and start anew (10.6.3).  My bad but is all lost?? Years of very important information....

    You will need to purchase reovery sofware such as such as FileSalvage
    http://subrosasoft.com/software/filesalvage
    You can download a demo copy that will tell you what it can recover
    If you want to recover that you must pay for the software then
    When you do the recovery, you will need another disk drive to receive the recovered files
    Having install a new operating system on the disk after the retformat is going to gradually reduce the amount of data that this software will be able to recover for you
    Allan

  • Recover data from external hard drive that was Windows format and connected on a Macbook Pro. Did I lose everything? What happened?

    Hi there this is my first question here!
    I connected my external hard drive originally formatted on PC on my new Macbook. The first time I connected it I could see all my files but today I connected it and after I couldn't see any file nor even on my pc appears as NO NAME with a different name and nothing on it. I think was reformatted, any help to recover all my data?
    It's really important stuff for me

    If the Apple Store couldn't get files off of the drive, it is unlikely that you will be able to. If you have backups, those would be the best way to go. You could also try booting up the computer and holding down T to boot into Target Disk Mode. Plug the broken computer into another one with FireWire and see if it works to recover data from external hard drive. If you can see it, try booting up the broken computer while holding down Option. Choose Recovery HD from the menu, then choose to Reinstall OS X.
    It is unlikely that this will work, because I'm pretty sure that the Apple Store would have tried this. You could try using expensive software to get files off the drive, but it would be risky and the results might not be any good.
    https://discussions.apple.com/docs/DOC-4273

  • Question about to recover data from windows essential 2012 (with raid0 or 1)with third party software !

    hi,
    I like to know if it is possible to install data recovery software on a extern harddisk ,and run it from there , just run  the  third party software in the memory of windows essential 2012 to recover data from its  harddisk  which has
    raid 0 or 1.
    if it is possible to install third party softare on extern harddisk or on usb stick on run it from there which steps I have to take ,or if there is some article about  it on windows website.
    how to install third party softwares on extern harddisk or usb stick on run it from there.
    thanks
    johan
    h.david

    Hi johan,
    Based on your description, I understand that you want to know how install a third-party software on an external
    harddisk or usb and then run this software from there. Regarding this issue, I suggest that you should contact with the third-party software support and confirm it. Since most programs use windows registry entries, and may rely on some .dll files. If all relevant
    auxiliary files and configurations of this software were installed in one directory tree, you may be able to install and run it on an external harddisk or usb.
    Hope this helps.
    Best regards,
    Justin Gu

  • Trying to Recover Data From Old Backup Exec Tapes

    I have been tasked with recovering data from an old Windows XP machine with an HP C1537A DDS3 tape drive.  The machine used Backup Exec to create the tapes.  In trying to recover the data I constantly get an error that says the data on the tape is inconsistent.  I tried to run the HP analysis utility but it said the error log of the drive was full and it would be necessary to do a firmware load to clear it.  I therefore loaded the lastest firmware.
    I ran the HP analysis utilities using one of the tapes as a scratch tape (to write over):
    Test 'DDS Drive Assessment Test' started on device 'HP C1537A' at address '6/0.0.0'
    Please reload your media. Do you wish to continue?
    |__ Analysis Results
        ||__ DDS Drive Assessment Test version V08.11.2006
        ||__ Device Analysis for DDS Drives
        ||__ Firmware rev 'L411' is up-to-date for 'C1537A' as of Wed May 25 19:00:00 2005.
        ||__ You appear to have used tapes not designed for this drive.
        ||__ Please use tapes that are compatible with your product.
        ||__ Unsupported tapes have been inserted 6 times.
        ||__ You appear to be using very old tapes not designed for this drive.
        ||__ Non-MRS tapes tapes have been inserted 3 times.
        ||__ There were 9 rules checked.
        ||__ Testing has completed and no problems were found.
    The tape that was used in the analysis was a maxlell HS-4/125s DDS3 tape -- the same type that was used to create the backup tapes. 
    Why does the drive think I am using "very old tapes not designed for this drive"?  The tapes were witten to by this drive.
    What is a "Non-MRS" tape?
    The end results appears to be that "no problems were found" but Backup Exec reports that the tapes have inconsistent data. 
    Any suggestions on how to make the tapes readable by Backup Exec would be appreciated.
    I am using Backup Exec 9.1 Rev 4691.  Please do not suggest using a later version as this is the latest version that (1) will run on a Windows XP Pro box and (2) that supports the tape drive.

    Saberman,
    Have you tried the Enterprise/Business forum for this?  I doubt anyone here on the consumer section will be able to help you with Tape Storage.
    Here is the link to the Tape section of the forum.
    http://h30499.www3.hp.com/t5/Tape-Libraries-and-Drives/bd-p/itrc-198
    Good luck.

Maybe you are looking for