Recovering data from one external hd to another

So the tech told me I have a bad hard drive. I am now booting up from an external HD(passport) and all seems to be going well.
I have another external HD (G drive) connected running time machine.
Can take my backed up data from the time machine external HD (G drive), and send it to the Passport and get all my files and programs back?
Or will an external Time Machine drive only back up to the macs internal drive?
Thanks a ton!

Under normal circumstances, Time Machine can back up an attached external drive. This may not be so since the internal hard drive is dead. Try to inherit the backup and test.
Inherit a Backup
Inherit a Backup (2)
Time Machine Troubleshooting

Similar Messages

Can I transfer data from one external drive to another using my MacAir as a platform?

I am trying to transfer about 94 Gigs of data from one external drive (Touro) to another (Seagate) using my Mac Air which only has about 14 Gigs of available space. How best can I accomplish this operation?

Niel - I know that I must be a real dunce on this. I tried opening the additional window on finder and then dragging and dropping from the Touro drive to the other open finder window for the Seagate drive. Again, it bounced back. What is NTFS? And how do I find if either or both of the drives are formatted in that manner?
Again, thanks for you help on this.
JC
PS I just got the info on the Seagate that it is Windows NTFS formatted. What do I do now? Is Paragon something I can download off the Internet? Why, since I formatted the Seagate to run on my Mac Air would there still be a problem? The packaging on the Seagate says it is compatible with Mac OS systems. jc

Need to transfer data from one external hd to another hd

Hi, I need to transfer movies from one external hd to another external hd - destination hd is formatted currently as NTSC, source hd is formatted currently as Mac OSx extended (journalled).
I believe I need to transfer data across to different hd before I can reformat source hd to MSDOS - fat. Then after reformatting source hd I want to transfer data back from destination hd to source hd, to allow this to be viewed on TV & PC...
I have tried copying & dragging from one to another, doesn't work (on desktop, or in Finder).
Any help welcome, thank you.

When you reformat a drive it erases all data. You'll need to buy a second external drive.
Note: you can reformat a single partition on a drive. More info
I like the Seagate USB 3.0 Backup plus drives. Works on USB 2.0 ports. They come formatted for PC but easy to format in Disk Utility.
I don't recommend Western Digital because of the boot problem with some of their drives. LaCie makes good drives. All Mac formatted drives will cost more and it’s easy to reformat with Disk Utility. Do not use the software that comes with the drives. It’s recommended that you use Apple’s Disk Utility.
Prices vary but this gives you an idea of what you’ll find. As you notice the second and third TB is usually only $15 more per TB. It's not uncommon to find a 1T is more than the 2T
Current Amazon pricing:
Seagate Backup Plus 1 TB USB 3.0 $154.85 (used to be around $85.00)
Seagate Backup Plus 2 TB USB 3.0 $114.95 (used to be around $99.00
Seagate Backup Plus 3 TB USB 3.0 $129.90 (used to be around $115.00)
Locally, Best Buy seems to have the best prices.
Occassionally you'll find the 3T for $99 on sale.

Transferring data from one external drive to another

HI,
I want to get a new external hard drive and transfer all of the data from my old one - which is not full, but has started to click and operate slowly. The old external hard drive is where I keep the music files for my itunes library, as well as all my personal files. I run all software on my iMac, OS 10.6.8 (i.e. the itunes Library files are on the imac's internal hard drive - the music files themselves are on the external).
Is there a link or a manual that someone can point me towards to perform this operation smoothly?
Much appreciated,
Scott

Make sure the new drive is formatted Mac OS extended. You don't need to do anything fancy with erasing or partitioning.
Kappy's brief drive formatting instructions (12/2012) - https://discussions.apple.com/message/20571091#20571091
BDAqua's Formatting instructions - http://discussions.apple.com/message/8901255
Pondini: Formatting, Partitioning, Verifying, and Repairing Disks... - http://pondini.org/OSX/Home.html, specifically http://pondini.org/OSX/DU1.html
Drag all the contents of one drive to the other. This make take some time and you may wish to break it up into groups of folders.
Once you have the iTunes folder on the new drive you will encounter a problem because you decided to keep your library files on the internal drive and your media files on the external drive (not normally recommended unless you have specific reason for not keeping them all in the iTunes folder in one place). Unless you give the new drive exactly the same name and folder structure as far as iTunes is concerned you will end up with broken links for all your tracks because iTunes will look for them on the old drive. If you keep iTunes's normal preferences for managing media but have simply redirected it to use an external drive, change the preferences in iTunes so it is now pointing to the media folder on the new drive.
Hold on, you aren't done yet. Your links are still broken. Click on a track. When iTunes asks you to find it, look for the particular file in your media folder on the new drive. Hopefully iTunes will ask if you want to find others too and will do so automatically (be patient).

Use Time machine to back up data from one external drive to another

I keep my entire archive of digital photogarphy (700 gb) in a folder on an external drive. I want to duplicate that folder on another external drive and use Time Machine to automatically synch and add new photos to this back up folder on another drive.
My questions are:
Can Time Machine do this?
If not, then what could I use to do this?

If both are attached to the computer, you might be able to do that using a clone program that can regularly schedule backups. Many have free demo modes.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

Lightroom - how to restore backed up files (not Lightroom catalogue) from one external drive to another?

How to restore backed up files (not lightroom catalogue) from one external drive to another.
I recently backuped my photo files from one external drive to another. The backup (carbon copy cloner) pointed to some corrupt files on the original drive.
I have deleted those files and am finding good copies of them in Time Machine backups.
I want to get rid of the original external drive; use the recent backup as my main external and then back it up onto a brand new drive.
What I am not sure about is how to point lightroom to the backups so it knows to look on the new drive instead of the old drive and all those exclamation marks and question marks go away.
There are close to 60,000 images in numerous folders all with one 'parent folder.'
My best guess is from Lightroom Help - Create and Manage Folders - Locate Missing Folders
Can I point to the one parent folder and all the subfolders will come back?
Is this the process to recover files into lightroom and will there be a problem with so many photos?

http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

.DS_store won't let me move files from one external drive to another

I am trying to move some music files from one external harddrive to another. They are both connected to my mac mini.
In the "from" harddrive I have a folder with a bunch of music files in it and it also has a new file in it called DS_store. When I open this folder and select all, it naturally selects all of my music files and this DS_store file. When I try to drag all of this to the "destination" harddrive I open the folder that I want to drag them to which already has some music and it has the DS_store file too, it won't let me drag the files to it   It says something like there is already a DS_store file there. So I tried deleting that file from each external drive and it just reappears.
If I create an empty folder in the destination drive, I can drag all of the files to it. The problem is I want the new files to be in the same folder with the older files.
In addition there are a few other ghost type files that have shown up too.
Any suggestions would be welcome. Thanks.

If you're copying from a FAT-formatted volume, do as below.
Back up all data.
Select the text on the line below by dragging across it. Don't include the blank space at the end of the line. Only the text should be highlighted.
dot_clean -m
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Now switch to the Finder and and select the icon of the FAT volume. Drag into the Terminal window. More text will be added to what you entered.
Click in the Terminal window to activate it, then press return.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear. Then quit Terminal and try the copy again.

How to move Startup Disk clone from one external drive to another?

I thought this would be a question easily answered on the WWW and easily found via search engines, but so far no luck, hence this question.
Prior to upgrading from Lion to Mountain Lion I followed some very good instructions from Tom Nelson on ask.com (http://macs.about.com/od/backupsarchives/ss/diskbackup.htm) related to using Disk Utility to clone my internal Macintosh HD drive to an external hard drive, making it a bootable drive. I cloned to a very nice LaCie external FW drive that had far more room than that needed for the clone. This drive booted just fine as a startup disk, so mission accomplished:   I have now a bootable clone of my Lion system prior to upgrading to Mountain Lion.
The upgrade to Mountain Lion went well, and now, before I put any additional apps or much additional data on the original internal Macintosh HD drive, I want to use Disk Utility again to clone the drive so I'll have a snapshot of the system right after the upgrade to Mountain Lion.
Questions:
Is there any way to use the same LaCie drive that now holds the Lion startup disk clone to hold the yet-to-be-done Mountain Lion startup disk clone?
If not, how can I move the Lion startup disk clone from the oversized LaCie external drive to a drive more the size of the Lion clone (approx 140G)?   The LaCie drive is far too roomy and nice to have sitting gathering dust for only 140G to be used in an emergency restore.
Thanks in advance for your advice.

Good info Csound1, and thanks.
So my final question (I think): How does one move/copy a startup disk clone from one external drive to another, and still have it bootable on the new external drive?   I'm still considering freeing this LaCie drive up for more dynamic storage and getting another drive for the bootable startup disk clones IF I can move this Lion startup disk clone to a new external drive.
I guess the summary question is:   how does one clone a startup disk clone? As I think about this, and recall the Disk Utility screens, couldn't I simply select the Lion clone on the LaCie FW external drive and do the same operation I did with the original internal Lion drive? Basically the same steps as before but this time the source is the LaCie FW external and the destination is a new external drive?
Thanks again; wonderful forum here with very smart people.

How to pass data from one internal session to another internal session

hi all sap experts ,
How to pass data from one internal session to another internal session and from oneExternal session to another external session.
Except : Import and Export parameters and SPA/GPA parameters.
Tell me the otherWay to pass data ..
Plz
Thanks in advance

hi,
abap memory management u will understand about this concept.
the import /export parameter will help u that passing data between two internal sessions by using abap memory.
for syntax
Passing Data Between Programs
There are two ways of passing data to a called program:
Passing Data Using Internal Memory Areas
There are two cross-program memory areas to which ABAP programs have access (refer to the diagram in Memory Structures of an ABAP Program) that you can use to pass data between programs.
SAP Memory
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens (see below).
ABAP Memory
ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse. For further information, refer to Data Clusters in ABAP Memory.
Filling Input Fields on an Initial Screen
Most programs that you call from other programs have their own initial screen that the user must fill with values. For an executable program, this is normally the selection screen. The SUBMIT statement has a series of additions that you can use to fill the input fields of the called program:
Filling the Selection Screen of a Called Program
You cannot fill the input fields of a screen using additions in the calling statement. Instead, you can use SPA/GPA parameters. For further information, refer to Filling an Initial Screen Using SPA/GPA Parameters.
Message was edited by:
sunil kumar
Message was edited by:
sunil kumar

How to pass data from one internal session to another

Hi SAP Experts,
How to pass data from one internal session to another and from One external session to another external session. I used import and export parmeter and SPA/GPA parameters. What is the other way to pass data?
Please tel me urgently
Thank you
Basu

Memory Structures of an ABAP Program
In the Overview of the R/3 Basis System you have seen that each user can open up to six R/3 windows in a single SAPgui session. Each of these windows corresponds to a session on the application server with its own area of shared memory.
The first application program that you start in a session opens an internal session within the main session. The internal session has a memory area that contains the ABAP program and its associated data. When the program calls external routines (methods, subroutines or function modules) their main program and working data are also loaded into the memory area of the internal session.
Only one internal session is ever active. If the active application program calls a further application program, the system opens another internal session. Here, there are two possible cases: If the second program does not return control to the calling program when it has finished running, the called program replaces the calling program in the internal session. The contents of the memory of the calling program are deleted. If the second program does return control to the calling program when it has finished running, the session of the called program is not deleted. Instead, it becomes inactive, and its memory contents are placed on a stack.
The memory area of each session contains an area called ABAP memory. ABAP memory is available to all internal sessions. ABAP programs can use the EXPORT and IMPORT statements to access it. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
All ABAP programs can also access the SAP memory. This is a memory area to which all sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters are often used to preassign values to input fields. You can set them individually for users, or globally according to the flow of an application program. SAP memory is the only connection between the different sessions within a SAPgui.
The following diagram shows how an application program accesses the different areas within shared memory:
In the diagram, an ABAP program is active in the second internal session of the first main session. It can access the memory of its own internal session, ABAP memory and SAP memory. The program in the first internal session has called the program which is currently active, and its own data is currently inactive on the stack. If the program currently active calls another program but will itself carry on once that program has finished running, the new program will be activated in a third internal session.
Data Clusters in ABAP Memory
You can store data clusters in ABAP memory. ABAP memory is a memory area within the internal session (roll area) of an ABAP program and any other program called from it using CALL TRANSACTION or SUBMIT.
ABAP memory is independent of the ABAP program or program module from which it was generated. In other words, an object saved in ABAP memory can be read from any other ABAP program in the same call chain. ABAP memory is not the same as the cross-transaction global SAP memory. For further information, refer to Passing Data Between Programs.
This allows you to pass data from one module to another over several levels of the program hierarchy. For example, you can pass data
From an executable program (report) to another executable program called using SUBMIT.
From a transaction to an executable program (report).
Between dialog modules.
From a program to a function module.
and so on.
The contents of the memory are released when you leave the transaction.
To save data objects in ABAP memory, use the statement EXPORT TO MEMORY.
Saving Data Objects in Memory
To read data objects from memory, use the statement IMPORT FROM MEMORY.
Reading Data Objects from Memory
To delete data clusters from memory, use the statement FREE MEMORY.
Deleting Data Clusters from Memory
please read this which provide more idea about memory
Message was edited by:
sunil kumar

How do i transfer data from one internal tabe to another.

Hi All,
         How do i transfer data from one internal tabe to another.
         Can i do it ebven if he tables are different in structure.
Please Advice.
Thanks in advance.

Hi Saket Tiwari,
I hope the earlier post by kashyap is good enough an answer. anywas in addition to it let me give a detailed
explanation of how you can populate an internal table.
1) Append data line by line.
     Syntax : APPEND [<wa> TO / INITIAL LINE TO] <itab>.
this appends new line to internal table <itab>.
2) Using COLLECT statement.
             COLLECT is another form of statement used for populating the internal tables. Generally COLLECT is used while inserting lines into an internal table with unique standard key. The syntax for COLLECT statement is as shown
     Syntax : COLLECT [<wa> INTO] <itab>.
3) Using INSERT statement
     Syntax INSERT [<wa> INTO / INITIAL LINE INTO] <itab> [index <idx>].
INSERT statement adds a line/work area to the internal table. You can specify the position at which the new line is to be added by using the INDEX clause with the INSERT statement.
Now coming to your request..
To append part or all of an internal table
     Syntax
              APPEND LINES OF <itab1> [FROM <n1>] [TO <n2>] TO <itab2>.
*     Note:
Without the FROM and TO options, this statement appends the entire table <itab1> to <itab2>.*
b) To insert part or all of an internal table into another internal table
     Syntax
          INSERT LINES OF <itab1> [FROM <n1>] [TO <n2>]
          INTO <itab2> [INDEX <idx>].
c) Using Move statement.
To copy entire contents of one table into another in one execution
     Syntax MOVE <itab1> To <itab2>.
               OR
          <itab1> = <itab2>.
but u hav to be careful because he contents of itab2 will eb overwritten on the execution of this statement.
These copy the contents of ITAB1 to ITAB2. Incase of internal tables with header line we have to use [] inorder to distinguish from work area. So, to copy contents of internal tables with header line the syntax becomes,
ITAB1[] = ITAB2[].
Coming to the letter part of your question, Yes, we can copy values between tables having different structures.
for this we use
                            MOVE-CORRESPONDING <itab1> TO <itab2>
    this executes the statement for their header lines. Searches for the sub-fields which occur both in itab1 and itab2 and then generates, for all relevant field pairs which correspond to the
        sub-fields ni , statements of the form MOVE itab1-ni TO itab2-ni. The other fields remain unchanged.
I hope the information provided has been of your help.
Reward if useful.
Regards,
Jose

How do I transfer data from one exterior harddrive to another?

How do I transfer data from one exterior harddrive to another when they are both connected to our Imac Desktop?

Depends what you want to transfer...
A few more Details about what you are trying to achieve would be good.

How do i copy files and folders from one external harddrive to another on the iMac?

For some reason when i drag the folder or file that i want to transfer or copy from one external harddrive to another, nothing happens when i drop it on the destination folder or drive. however, when i drag and drop to the desktop or any location on the Imac internal hardrive it works without any issue. The only problem is that i dont want to transfer or copy stuff to the computer. i want to copy it to an external harddrive. please help if your have answers to my question.
Thanks!

Check the formatting of the external hard drive. To do that, right click on the drive icon and select Get Info. (Or click once on the drive and type command +i ) The pane includes information about the drive format.
The drive should be formatted as Mac OS Extended. If it is not, run Disk Utility (App;ications / Utilities) and format the drive.

How do I move an iTunes library from one external drive to another?

I need to move my iTunes library from one external disk to another, because the original disk is about to fail. So, I went into iTunes Perferences --> Advanced, and set the library to a new, empty folder on the new drive.
Nothing changed. I expected all my music to vanish from iTunes, so that I would have to re-import it. However, all the music remained, still on the old disk. At this point, if I were to recreate the library on the new disk, I would have all of my music twice.
Is it possible to move an iTunes library from one external drive to another, or am I stuck with my original choice until I buy a new machine? If I can move it, can one of you clever folks explain how it could be done?

Paul Seymour1 wrote:
However, those are all dealing with old versions of iTunes that still contained the Advanced --> Consolidate Library command which is no longer part of the app. (I'm on iTunes 10.6.1.)
Consolidate is still part of iTunes.
It is in iTunes menu File > Library > Manage library > Consolidate.
The article you linked to is old and it is (and was) a hacky way of doing it.
Just copy the entire /Music/iTunes/ folder to new location, hold Option (Mac) or Shift (Windows) when launching iTunes.

Recovering data from one external hd to another

Similar Messages

Maybe you are looking for