Recovering data lost during change of unit of time for Info structure S061.

Dear Sir,
I have changed the period unit from 'month' to 'week' through SPRO>Logistic Data Warehouse>Activate update.
Due to this the data of Info Structure S061 is lost and when MCI3 transaction is executed the message " No Data found"
message is shown.
Kindly guide me how to get back the past data in MCI3.
Thanks and Regards,
R N Sabat.
Edited by: rnsabat on May 25, 2011 11:01 AM

Hi,
A update period of day/week will not work for S061. Any structure with costs must be set to month or posting period. See note [180047|https://service.sap.com/sap/support/notes/180047].
If you want to make cost evaluations in the information system, only use the period unit 'month' or the posting period.
Once you adjust the customizing it will be necessary to rebuild the info-structure S061 with OLPM transaction. This works on the basis that a temporary version is created e.g. &(1
This temporary version must then be copied to the live version 000 using transaction OLIX.
-Paul

Similar Messages

Recover data lost during sync

My itouch data is now gone when I tried to sync my recent device downloads to my itunes library. Instead, the sync copied a blank library back to my itouch and wiped out all of my apps, photos and music. Is there any way to recover game files (without replaying everything) and / or the photos? Please help if you can!!

You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You can get recent photos from PhotoStream if you turned it on.
iCloud: Photo Stream FAQ
If you have an iPod backup you can restore from the backup to get photos (not synced photos) and app data provided that if you restore via iTunes the apps are in the iTunes library .

How do I recover apps lost during a ios5 upgrade?

How do I recover apps lost during a ios5 upgrade?

Redownload them from the App Store or resync them from your computer.
(64014)

Can I change the moments and time for photos?

Can I change the moments and time for photos?

By editing the EXIF data. You'd need an EXIF editor for this...if using Windows, you can use Windows Exploroer. To do so on your phone, you need an app, like this:
https://itunes.apple.com/us/app/exif-fi-photo-gps-exif-viewer/id574247475?mt=8

Date fields for info structure S032 are not generated

Hi Experts,
I am trying to update set up tables for '02' using OLI2BW. I excluded some plants from selection and executed the set up. But the job run for few mins and completed with the message "Date fields for info structure S032 are not generated".
I couldn't see any records in RSA3.
Please through some light on this issue.
Points reward for usefull help.
Please no wild guess.
Regards,
-N-

Did you find out why. I am getting same message.
Thanks
Shalini

How do I recover data lost from restoring

I restored my ipod touch to the settings of a former ipod touch without realizing it would delete all my data. It erased some pictures and video, so I am wondering if there is any way to recover that lost data. Help!

Not unless you can restore from a backup that was made from the ipod when it was the way you wanted it.

Standard table data lost during adjustment

Dear experts,
Greetings.,
I was trying to make changes in a domain of an append structure of a standard table and while adjusting the table..i lost the data from the table (which was standard table). Any suggestion how to retrive it back?
Please help
Regards
Sathya

Hi,
Just check with your BASIS team if there is any backup. Usually they take the backup in production server. In dev and test they don't take unless it is required. If there is no backup, i dont think you can get back the data as table adjustment happens at database level and not at data dictionary level.
Thanks,
Vinod.

How to change order unit in ME22n for particular vendor

Dear All,
We have defined ordering unit in material master as "L".
For other vendors & new PO we get proper ord.unit display.
But we r not getting in PO of particular vendor.
How to get order unit in ME22n ? What is the relation of order unit with Vendor ?

Hi
Did you ordere the particular material for the vendor concerned already with different Order unit (SKU), this might be the reason why you are not getting the ordering unit in PO while ordering. Did you maintain the details of conversion in master between SKU & Ordering unit,if yes, then check for Info Record for the material and vendor combination and in the Genaral Data Tab chek for the variable order unit activation if not available then activate it and if the system is asking the conversiondetails enter herr the conversion also. Now if you create PO you will be able to assigne the new order unit.
Regards

PXI: NI 5600, data lost or stored if the loop time of processing is slow than the acquisition.

I want to know what occurs exactly at the time of L acquisition and the processing data acquired with Ni 5600. When J write my programme of processing of data in Labview, if the loop time of processing of data is slow than the acquisition, I want to know if PXI put the data in a buffer or then the data are lost.
J wait your answer impatiently. You can tell me the documentation were can i read to see the answer.
Anybody can help me.

hi abidi,
First, let me tell you how buffered acquisiton works.
If you are using Daq mx for continous acquisition, Labview will autoselect the size of buffer depending on the sampling rate specified.
In sample clock.vi, select sample mode as "continous samples".
Now, Labview will determine the loop speed for reading data that is written into the AI buffer and hence run necssary number of AI read loops to retrieve data from the buffer every second.
this loop speed can also be set by specifying "number of samples per channel" in AI read.vi.
If you leave this value at default ( -1) labview will function as explained above
This can also be set by user ,for example, if your sampling rate is 1000 saples per sec and number of samples per channel is 200, the AI Read functions is performed 5 times in a second.
read this link to get to know about cyclic buffers and continous acquisition.
http://zone.ni.com/devzone/conceptd.nsf/webmain/F2DDCBAD754C687C86256802007B8514
You tell that you are performing some processing on acquired data.
Now, your prgram has to allocate adequate process time for acquiring,retriving data from buffer and then processing it.
the time allocated for processing data depends on the kind of mathematical conversions involved. Nevertheless it is an overhead on the acquisition loop.
this may result in overflow of buffer and data being overwrittien in buffer which results in data loss. An eror message might also pop up to warn that this has happened.
so if your application permits, here's what you can do to avoid this problem
First acquire data and save it on system in ascii or binary fromat.
later retrieve this data file and perform processing /analysis on it.
if you have any further doubts, plz tell.
regards,
Devchander M

How do I change the start/stop time for multiple songs not just one song at a time?

How do I chnage the start/stop time for multiple songs not just one song at a time?

I don't think you can in iTunes.
Multiple editing in Get Info does not offer an option to change start/stop times.

IPhone data lost during update using friend's pc.

Hello
My g/f has an iPhone 3G which she has used a lot for 18 months and had lots of saved texts and photo’s etc, but she is not very good at backups and has lost everything when upgrading from the original software, (about 2.6) to the current 4 something. Very unfortunately and unwisely, this was not even done on her own computer, but on a friend’s.
She has her own desktop pc and uses iTunes but hardly ever connects the phone and always declines to update when she does connect. She last connected about 6 months ago.
On New Years Eve we were at a friend’s house and a knowledgeable sounding guest offered to update her phone on her friend’s computer. They have their own iTunes account on it.
We connected the phone up and it started updating via the iTunes program and after one or two hours the software and firmware update completed. The sync options were then presented and as the knowledgeable person had by then gone home we thought “Well, we don’t want to sync with anything on this computer, we will disconnect and sync later on g/f’s home computer.” (We are still not quite sure what syncing is although g/f thinks she has synced before from home)
As you have guessed, the software upgraded fine but phone has been wiped of all data, pics, iTunes downloaded, texts, contacts, notes, calendars.
The obvious problem in this case is that we used someone else’s pc. I have located the mobilesync backup folder on g/f’s own pc and it is empty.
Is there any hope that we can retrieve anything from our friend’s pc which we updated on? Would a folder have been created separately on their pc for my g/f’s phone?
I was not watching the pc the whole time it was updating and did not see everything that happened, but what I have established is that when I plugged her phone to her pc yesterday I got the warning message saying that the phone has been synced to another computer, (presumably the friend’s) and all data on the phone will be erased if I sync on this one (her one).
What I don’t know is whether this warning message had come up on New Years Eve on the friend’s computer while updating, and whether it was ignored.
We have been back to our friends but they are getting a bit fed up with us, I think they will put up with us using their pc one more time so this time we will have to know what we are doing. I have an external HD so I could maybe copy the iTune files from their pc and work on them from home later?
With thanks

Well.... I guess based on the replies, I should consider that password manager info not being part of the backup is normal for all of us.
If not, maybe it's just one of these numerous glitches and bugs I have since I own a blackberry.

HT4623 Can I retrieve data lost during update?

Can I retrieve data tha was deleted during an update?

What data?
You should have made sure that everything was on your computer before any update.

How do I recover apps lost during ios update?

I just updated Ipad to ios 5 successfully but I lost a bunch of apps. What happened? How do I recover them?

As long as the apps are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free : http://support.apple.com/kb/HT2519 . If you download them to your computer's iTunes you could then try restoring to your backup and see if that restores them and their settings/content - a backup doesn't contain the actual apps, just their content/settings, so for the restore to work fully iTunes needs access to the apps so that it can restore them.

Can I recover photos lost during an import error

I was importing my photos from a memory stick and an unexpected error occured quiting iphoto. I had the import set to delete from memory stick after transfer. Now my first 20 pictures are missing I can't find them in the iphoto folder/ library on the computer or on the memory stick. Is there some way I can recover these photos of my childs first day of school?

MediaRECOVER will do the job for you. You can download and run it in demo mode (it will allow 1 image to be recovered in demo mode) to see all of the photos that it can find to recover before you commit to purchase. I recovered 196 files from a card that I had intentionally deleted and then discovered that I shouldn't have.
Hope this has been of some help. Good luck.
OT
P.S. Read and heed Peter's recommendations regarding future deletions.

How to recover data lost with Boot Camp

I was removing my boot camp partition when in the middle of it boot camp crashed. I went back into boot camp to check if the option to uninstall windows was still there, but it wasn't. I went to about this mac etc. and the storage didn't show my windows 7 partition but the data from the windows 7 partition was gone and My macintosh HD was missing the storage. Any Ideas on how to fix it? Sorry if my question doesn't make sense.

I guess everyone has their own idea of what is easy. A backup, reformat, restore to me is an utter PITA. Once you have free space, that free space is still not usable by Mac OS. You have to expand the Mac OS volume to use it. Sometimes this can fail because of the weird way Apple has chosen to sequence the partitions, with the Recovery HD Partition located after the Mac OS partition, making Recovery HD in between Mac OS and Free space. Apple's diskutil resizevolume command will move Recovery HD around as part of a resize. The basic command is:
diskutil resizevolume /dev/disk0s2 limits
That will show minimum, current and maximum resize limits. If current doesn't equal maximum, then free space has not been incorporated into the Mac OS volume. You can sometimes fix this with:
diskutil resizevolume /dev/disk0s2 R
That will expand the Mac OS volume to maximum size. If it fails then it's worth reconstructing the HFS+ catalog with:
fsck_hfs -r /dev/disk0s2
That command requires the file system be unmounted so you'll need to boot off another volume - Recovery HD is fine.
All of these are commands leverage features which the GUI doesn't offer access to.

Recovering data lost during change of unit of time for Info structure S061.

Similar Messages

Maybe you are looking for