Recovering from a lost EM OMS MGMT server?

We recently had a disaster where we lost our enterprise mgr OMS. We were running the OMS version 10.2.0.4 on linux x86 and our agents are also running on linux and they are the 10.2.0.4 agents.
So long story short, we have to rebuild the mgmt station and I am wondering if I will need to reinstall the agents or will they be able to register with the new OMS

Hi,
If the new installation is having same "old name" and port then I guess,you don't have to make any changes.
If it's different name,You can refer to metalink ID 413228.1,for relocating agents.

Similar Messages

Iphone cant recover from a lost of service

I am in canada, my Iphone sometimes lost the carrier signal and a "no service" message appear at the top left corner. The thing is the phone seems unable to recover from it even if I move to a full signal strengh location. I need to do a full hardware power off/on (holding the button) for the signal to come back. This is happening on my wife iphone too and all my friends with iphone have this problem too. the thing is its also happening with multiple service carriers (telus, Bell, fido, ...)
This looks a lot like Iphone software bug to me. That makes me think AT&T is NOT the problem in the US, its the phone.

Carrier was initially set at the Telus store and an carrier update happen when I sync it on Itunes. Its always set on Telus, I dont see any manual/auto settings. I was saying in my initial post that it happen on multiple carriers because my friends with iphones are on Bell and Fido and they also have the same problem. I even saw one of my friend phone went from 5 bars signal to no service while it was just standing there on a desk.
The problem happen yesterday. I set it to airplane mode then set airplane mode off and after that it search for a signal and found it. At least I dont have to reboot it anymore.
Also, the iphone is not very good at picking up signal inside buildings has other phones with the same carrier will pick up 5 bars while the iphone will be go down to 2 for example.
Message was edited by: herbapou

How to recover from a lost trust relationship (or zone configuration) between the linux ZCM agent to the Primary Zone server running on the same machine?

I have tried:
zac retr, which fails as it says there is no zone to which this agent
is connected
zac reg, which fails because of error 34 Invalid device authentication
information
zac rereg GUID, which fails because of missing zone (as zac retr)
zac unr, which fails because of the same error.
zac ci shows the correct certificates
almost everything is working except registration refresh and location
refresh.
What to do in this situation?
ZCM 11.2 with latest update (Monthly update 1)
W. Prindl

This was yesterday resolved by NTS - you see the "quick" resolution
time of NTS if you subtract the date of the initial post from the date
of this post - with an absolutely simple trick, which obviously nobody
did know of. The support engineer got it from the developer team.
There is a switch in the
/opt/novell/zenworks/share/tomcat/webapps/zenworks-registration/WEB-INF/
config.xml configuration file, with which you can switch authentication
off for device registration.
You just need to add <Authenticate>false<\Authenticate> into the only
configuration this file contains.
This suppresses the error 34 on device registration and the device gets
registered correctly upon restart of the zenworks suite. After this is
done one can change back the above mentioned file to the original state
and restart the zenworks suite again.
The solution was really easy to deploy - the time till this resolution
was found was IMO too long.
W. Prindl
W_ Prindl wrote:
>I have tried:
>
>zac retr, which fails as it says there is no zone to which this agent
>is connected
>
>zac reg, which fails because of error 34 Invalid device authentication
>information
>
>zac rereg GUID, which fails because of missing zone (as zac retr)
>
>zac unr, which fails because of the same error.
>
>zac ci shows the correct certificates
>
>almost everything is working except registration refresh and location
>refresh.
>
>What to do in this situation?
>
>ZCM 11.2 with latest update (Monthly update 1)

Recovering from lost or forgotten password in WLS 7.0

How to recover from a lost or forgotten password in BEA WebLogic Server 7.0 directly
without using WebLogic Compatability mode?

Are you talking about the password for the user that boots the server or
just any user?
"Shiva Kumar" <[email protected]> wrote in
news:[email protected]:
>
How to recover from a lost or forgotten password in BEA WebLogic
Server 7.0 directly without using WebLogic Compatability mode?

I lost my ipod i bought i new one...i just wanna know if i can still recover all the songs i bought and downloaded from my lost ipod to the new one..if i can how will i do that since i downloaded everything and bought in my ipod not in my computer

i lost my ipod and i just bought a new one...i just wanna know if i can still recover my downloads from my lost one to the new one since i bought and downloaded all the songs through my ipod and not through computer..if i can, how can i do that?

Nope.
Apple recomends after each purchase to BACKUP your purchases. If purchased on a mobile device (iPhone, iTouch, iPod, etc) you should transfer your purchases to a computer running iTunes as soon as possible to back them up.
If you don't have your items in your library, I'm afraid there is little recourse.
Hope you did not loose too much.

Cannot recover from lost of all the controlfiles without resetlogs?

Cannot recover from lost of all the controlfiles without resetlogs?
I have an Oracle10g (10.2.0.1) database(on RHEL5.0 system) DB10G with a recovery catalog database RCATALLOG. The RCATALOG database is synchronized with theDB10G database.
Then I lost all the current controlfiles and I make the following steps:
SQL> shutdown abort;
ORACLE instance shut down.
SQL> startup nomount;
ORACLE instance started.
[oracle@hostp db10g]$ rman target / catalog rman/oracle@rcatalog
RMAN> restore controlfile;
RMAN> alter database mount;
RMAN> r*ecover database;*
RMAN> alter database open;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 09/17/2008 20:04:07
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
RMAN> alter database open noresetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "identifier": expecting one of: "resetlogs, ;"
RMAN-01008: the bad identifier was: noresetlogs
RMAN-01007: at line 1 column 21 file: standard input
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found ";": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, connect, copy, convert, create, crosscheck, configure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, library, list, mount, open, print, quit, recover, register, release, replace, report, renormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, validate"
RMAN-01007: at line 1 column 32 file: standard input.
Because I did not restore the the controlfiles from the backups, I do not need to open the database with open resetlogs.
Why I cannot open the database without resetlogs? Is any step wrong?
Thank you

Hi,
You restored the controlfile from backup but not the full DB. The Database files header are not sinchronized with your controlfile.
Follow the following steps:
1) Mount your Database and create a backup of the controlfile using:
SQL>ALTER DATABASE BACKUP CONTROLFILE TO TRACE;2) Modify the trace file and recreate the controlfile.
3) At this stage your database is mounted. You need to recover it.
SQL> recover database;
Media recovery complete.4)Open the database after recovery completes.
SQL> alter database open;
Database altered.Done, any problem you can use this link for reference:
- http://www.databasejournal.com/features/oracle/article.php/3738736
Cheers,
Francisco Munoz Alvarez
http://www.oraclenz.com

Recovering from various disasters

Hello,
I'm trying to put together a plan to recover from potential OVM failures, but I'm unclear about a number of points. Any suggestions and clarifications would be most welcome.
Guest:
We're installing a backup agent on all the VM's (Red Hat and Oracle Linux). If the VM was somehow completely lost, we plan to re-create it, do a fresh o/s install, and restore the filesystems from backup.
VM Manager:
It runs as VM. To recover from a problem, we plan to reinstall the VM Manager using the same UUID, rather than backing it up. If we were to back it up, are there critical configuration files we should back up?
Database:
This is exported and backed up regularly.
Oracle VM Server:
I'm not sure about this one. If we somehow lost one server (we have a 3-node cluster), if we just reinstall Oracle VM Server with the same ip and hostname would all be well after I rediscovered it? As long as the other two nodes were up and running, would the rebuilt server be added to the ocfs2 cluster when it's rediscovered?
Also, what information is in the server pool filesystem and the database? How do you all back up the server pool filesystem (or do you?) ? We can't install our backup agent on the Oracle VM Servers.
Thanks for any help you can offer.
Edited by: user13166809 on Jan 7, 2013 12:55 PM

there is no need to backup the Oracel VM Server .
if something wrong with the OVS,not the ocfs2,you may wipe the db for the OVS,and the restart the agent then reboot the OVS.The ovs would be fresh as you just installed it

Recovering from IIS reset

Hello,
How to recover from a scenario when on the only server in the organisation running Exchange 2013 (other servers still run Exchange 2007), the IIS configuration files have been completly lost and back-ups are not available?
I have an empty Default Web Site, I cannot start Exchange Management console, and I have to restore ECP, OWA, EWS, Autodiscover, PowerShell, OAB and Active-Sync...
Since Exchange 2013 relies on IIS, is there any comprehensive guide on how to recover from a complete IIS reset?
Przemo

Hi,
Thank you for your replies. I know that I have to rebuild virtual directories but it seems there is no way to do it. I cannot uninstall Exchange 2013 because it already contains several mailboxes.
I already tried the recover switch but it only checks if necessery (according to AD config) roles are installed and once it finds them in the regisistry it assumes that everything is ok (what a silly assumption!). You could probably delete manualy Exchange
binaries and recover switch would tell you that all necessery roles are already installed - so this command
is useless.
Now I wasted whole weekend on this and the solution I came up with is a little bit around. I set up separate VM with Windows Server 2012, I created separate Active Directory domain, then I installed Exchange 2013. Once it was complete I copied IIS configs
from this VM to my broken Exchange server. After some modifications, including configProtectedData and listenerAdapters sections I successfully "restored" IIS virtual directories.
Best regards
Przemo

Adobe cloud has lost connection with the server

Adobe cloud has lost connection with the server, can't get adobe cloud to work so I can re-install photoshop to fix a corrupted DLL file.

*Adding new items/removing orphans*
Try iTunes Folder Watch or iTunes Library Updater. Folder Watch is much faster on the adding files front, can be set to run in the background and includes a useful exclusion feature, however it’s slow at removing orphans. iTLU is better for this although doing it manually after looking at a list of proposed removals generated by Folder Watch is probably faster still. iTLU can also be set to update iTunes when you've used 3rd party tools to change tag info.
You may need to amend the list of file types these programs look for. My list includes:
.mp3 .mp4 .m4a .m4b .m4p .m4v .mov .wav .aif .mid .ipa .ipg .ite .itlp .m4r .pdf
Note the last 6 types may not be recognised as already being in the library so should either be omitted from the search or you can add (at least for Folder Watch) individual exclusions for files you know are already in your library.
tt2

Is it possible to recover ical data lost in a sync?

Is it possible to recover ical data lost in a sync?

Your only bet is to resotre from the Time Machine backup. However when you do this the sync process will promptly delete the calendars again, so you need to work through the slightly convoluted method detailed in this page:
http://www.wilmut.webspace.virginmedia.com/notes/icloudtm.html

CCM 8.6.1- Installation Failed. Restart install to recover from failure

Hi All,
I am installing CCM 8.6.1 on an MCS7835I3 platform. The platform came with CCM 8.6.1 preloaded on the harddrive. During the installation linux detected some compenents like NIC, Raid, and USB.
then after checking some components i face below error
"The installtion has failed and must be restarted to recover from the faliure.
You may dump diagnostic information at this time to a USB storage key. Would you like to dump diagnostic information"
I am try to figure out what is causing this message.
Pls help me!!

Hi
It seems to me that your server did not begin the CUCM installation. If you already have pre-loaded CUCM media in the server hard disk then you should first check the boot sequence on the server. Make sure that the first option is the hard disk.
Once confirmed, restart the server.
If you still face the issue, then i suggest that you install CUCM from CD.
Below is the installation document. Do check the server compatibility and hardware requirements.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_6_1/install/cmins861.html
Regards ,
- Jayant

Mac Pro display does not recover from sleep

Hello,
I have a Mac Pro Mid 2010 with two graphics cards (ATI 5770 & nVidia Geoforce GT 120) and three displays. After intense use of the GPUs with graphics processing jobs, and after the screen goers to sleep, they do not recover. The computer is accessible via the network (ping, ssh, etc) however, the screens blank out and no longer recover from sleep. The only resolution is to reboot.
I have already run memtest all just to make sure there isn't a memory issue. All tests passed. Also, this issue has ocurred with Mountain Lion and Mavericks.
Does anyone have any suggestions or experiences with regard to this iussue?
Thanks

Update -- I now can reproduce the issue at will and it is definitely related to the sleep feature and has gotten much worse under OS X Mavericks. Side Rant -- First let me note how disappointing Mavericks is as a platform. Apple's output seems to be getting progressively less thought out, reliable and buggy.
Now back to the issue. I created a hot corner that puts my display to sleep. Every time I active the hot corner the system display is lost -- that is the system continues to function and respond via network (ping, ssh, etc) but no joy on un-sleeping the displays.
I have Mac Pro Mid 2010 w/ 2x 2.4Ghz Quad Core, 32GB RAM, ATI 5770 and NVidia Geoforce GT 120 using three displays (2x 27" Apple and 1x Panasonic 1080P HD TV) running OS X 10.9.1 (13B42).

Hi, I've just tried to upgrade my iphone 3gs and it wont restore from itunes or connect to the server to activate. Sorry I started this ! Any ideas please

Hi, I've just tried to upgrade my iphone 3gs and it wont restore from itunes or connect to the server to activate. Sorry I started this ! Any ideas please it's driving me mad and Ive lost my phone

What is the exact message you're getting?

Is there any file carver technology tool to recover from a HDD only a group of named jpg files

Is there any file carver technology tool to recover from a HDD only a group of named jpg files that i lost? I lost 500 jpg files in my iPhoto library named i.e from 1.jpg to 500.jpg and I want to recover ONLY them from an 1TB external WD My Book e-sata disk, to avoid time waste and unwanted jpg files.
I' ve used data recovery software as Photorec, but it recovers all the jpgs it can find, it can't search for specific name files and as it uses its own naming for the files it recovers, i have thousands of photos to look up and find these i really want.Not to mention so much waiting time.
Even if you know other technology tool that can help me please tell me.
I've also used StellarPhoenixMacDataRecovery that is not file carving tool, but with similar results.

Prosoft Data Rescue may be what you need. Others may work that way, that are described here:
My data has become inaccessible, and I don't have a backup!

TS3376 how do i take my phone off lock mode from the lost and track

how do i take my phone off lock mode from the lost and track

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5

Recovering from a lost EM OMS MGMT server?

Similar Messages

Maybe you are looking for