Recovering from an interupted stream

I have a robustness issue to deal with. Say I am streaming a
live event and the computer that is doing the streaming goes down,
thus losing the stream, but the event is still going on.
We restart the downed computer and reestablish the stream.
The stream has been interupted for, say, 5 minutes. I can use the
append function to reattach the new feed to the previously recorded
data. But what happens to the time values for the time the stream
was down? As FMS is later playing back the recorded stream, will
the feed go blank for the five minutes the stream was down, or will
we skip forward five minutes in time?
As you may have guessed, skipping forward is a bad thing for
me, so I'm going to need a solution to this if that's what'll
happen.
Any detailed help on this will be VERY much appreciated. I'm
new to this, and of course I've been given the hard stuff!

Similar Messages

I accidentally deleted photos from my photo stream, causing them to disappear from my camera roll aswell. I am desperate to get these photos back. Is there any way I can recover them? Thanks

Hi, I accidentally deleted photos from my photo stream, causing them to disappear from my camera roll aswell. I am desperate to get these photos back. Is there any way I can recover them? Thanks

Hi Am1121,
Welcome to the Apple Support Communities!
If you have a backup of your iPhone on either iCloud or iTunes from the time when those photos were on the Camera Roll, you can restore from that backup and recover those photos. Please use the following article for information on restoring from backups.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Have a great day,
Joe

Can't convert ringtone files recovered from Nokia ...

Hi everyone
I have a bunch of ringtones which I have recovered from a Nokia 6760 Slide. They were stored on the included 64 megabyte micro SD card. I want to convert them into a format used by my current phone.
They appear as ".aac" files which play well on VLC on my Mac. However, I cannot import them into iTunes and they will not play with any other media player. I cannot even import them into Fission to convert to another format. The export function of VLC appears to work, BUT when you try to play the newly created mp3 or whatever format you chose on some other player you again get an error.
I suspect the aac is suffix is just a container for an atypical or proprietary codec or something.
Does anyone have any ideas?
Solved!
Go to Solution.
Attachments:
ringtones.jpg ‏23 KB

SOLVED.
I tried many codec conversion apps: VLC, MPEG Streamclip, FFMpeg, Fission, MeGUI, Max.
I found out they were actually ADTS files inside an "aac" container.
In the end, I gave up on converting the files and simply recorded the VLC stream with Piezo.
CONCLUSION AND RECOMMENDATIONS
Don't bother trying to convert ADTS files. Nokia probably used some proprietary method of encoding.
Recording audio is much much easier.

How do I only have photos from my iPhone stream to my iMac?

How do I only have photos from my iphone stream to my iMac? I just downloaded from my digital camera close to a 1,000 pictures from my vacation on to my iMac and they all streamed to my iPhone! I don't want all those pictures on my phone. Is there a way to only have the photo stream work in one direction?

Photos downloading to your iPhone usually come from Syncing with iTunes. Look in the iTunes sidebar, click on iPhone under devices (must be attached). Click on Photos tab across the top to review which Photos, albums, events etc are synced from iPhoto.
Regards,
Captfred

Can't recover from sleep sometimes: "Oh no! Something has gone wrong!"

I'm running gdm + gnome-shell (force fallback mode) on a Thinkpad W520 with intel integrated graphics only (via bios setting, so no optimus). Once a week or so, my Laptop fails to go to sleep properly and to recover from it.
It basically works like this, normally when I close the lid, the sleep LED blinks a couple of times, and then stays on (and you can hear the fan turn off). When sending the laptop to sleep fails, the led blinks indefinitely (like, all night, if you let it), the fan keeps running as well.
Once you open the lid again, you are greeted with the message "ACPI: Unable to dock!" on a black screen. This happens when successfully recovering from sleep mode as well, though.
Shortly afterwards, instead of seeing a password prompt, you see this:
http://wocares.com/host/images/516726_sleeperr1.jpg
I tried to search the problem but couldn't find anything that was quite like my problem. I did however find someone saying the ~/.xsession-errors file could contain clues. So here is that:
/etc/gdm/Xsession: Beginning session setup...
localuser:esl being added to access control list
/etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
GNOME_KEYRING_CONTROL=/home/esl/.cache/keyring-JAbzae
GNOME_KEYRING_CONTROL=/home/esl/.cache/keyring-JAbzae
SSH_AUTH_SOCK=/home/esl/.cache/keyring-JAbzae/ssh
GNOME_KEYRING_CONTROL=/home/esl/.cache/keyring-JAbzae
SSH_AUTH_SOCK=/home/esl/.cache/keyring-JAbzae/ssh
GNOME_KEYRING_CONTROL=/home/esl/.cache/keyring-JAbzae
SSH_AUTH_SOCK=/home/esl/.cache/keyring-JAbzae/ssh
GPG_AGENT_INFO=/home/esl/.cache/keyring-JAbzae/gpg:0:1
(gnome-panel:1563): Gtk-CRITICAL **: gtk_accelerator_parse_with_keycode: assertion `accelerator != NULL' failed
** (gnome-panel:1563): WARNING **: Unable to parse mouse modifier '(null)'
Failed to play sound: File or data not found
Initializing tracker-store...
Tracker-Message: Setting up monitor for changes to config file:'/home/esl/.config/tracker/tracker-store.cfg'
** (nm-applet:1585): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unknown return code 1
** Message: applet now removed from the notification area
** (nm-applet:1585): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.
** (nm-applet:1585): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
** (process:1578): WARNING **: Trying to register gtype 'GMountMountFlags' as enum when in fact it is of type 'GFlags'
** Message: Starting applet secret agent because GNOME Shell disappeared
** (nm-applet:1585): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
** (process:1578): WARNING **: Trying to register gtype 'GDriveStartFlags' as enum when in fact it is of type 'GFlags'
** (process:1578): WARNING **: Trying to register gtype 'GSocketMsgFlags' as enum when in fact it is of type 'GFlags'
Tracker-Message: Setting up monitor for changes to config file:'/home/esl/.config/tracker/tracker-store.cfg'
** Message: applet now embedded in the notification area
(gnome-settings-daemon:1515): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -8 and height 27
(nm-applet:1585): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -23 and height 27
** Message: applet now removed from the notification area
Starting log:
File:'/home/esl/.local/share/tracker/tracker-store.log'
(notification-daemon:1608): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -23 and height 27
Any help or pointers in the right direction would be appreciated.

I'm having the same problem as you on a T420 (without optimus), see here: https://bbs.archlinux.org/viewtopic.php?pid=1131177

After upgrading to Mavericks and iPhoto 9.5 my shared photo streams seem to contain no photos when seen in iPhoto. From iPad the streams are fine. How can I get them to be recognized by iPhoto again?

After upgrading to Mavericks and iPhoto 9.5 my shared photo streams seem to contain no photos when seen in iPhoto. From iPad the streams are fine. How can I get them to be recognized by iPhoto again?

Disable Photo Stream in the System/iCloud preference pane
and in iPhoto's Photo Share preference pane.
Reboot and reenable both respectively. That should jump start Photo Stream.
OT

Blue screen error "windows has recovered from a unexpected shutdown"

Hi guys
I am using laptop & everyday it will unexpectedly shutdown and shows Blue screen error "windows has recovered from a unexpected shutdown"...Pls help me to resolve this issue.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional information about the problem:
BCCode: d1
BCP1: 00000030
BCP2: 00000002
BCP3: 00000000
BCP4: 8F2DA8A5
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\062614-23836-01.dmp
C:\Users\Venkateshwara swamy\AppData\Local\Temp\WER-74552-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

It could be some driver compatibility issues.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff560244(v=vs.85).aspx
http://blogs.technet.com/b/askcore/archive/2008/11/01/how-to-debug-kernel-mode-blue-screen-crashes-for-beginners.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

I AM UNABLE TO CONNECT TO ANY WEBSITE USING FIREFOX. EVEN THOUGH, I HAVE BEEN USING FIREFOX ON THE SAME COMPUTER FOR YEARS WITH NO DIFFICULTY. THE PROBLEM AROSE AFTER COMCAST, MY ISP, RECOVERED FROM A WIDESPREAD OUTAGE THAT LASTED 5 HOURS.

I SUCCEEDED IN TRANSFERING ALL MY BOOKMARKS TO GOOGLE CHROME. THIS WILL ALLOW ME ACCESS TO WEBSITES WHILE I WAIT FOR A METHOD TO REPAIR MY FIREFOX PROGRAM. IN A PREVIOUS MESSAGE, I EXPLAINED THAT I WAS UNABLE TO ACCESS ANY WEBSITE USING FIREFOX AFTER COMCAST, MY ISP, RECOVERED FROM AN OUTAGE THAT LASTED 5 HOURS. WHENEVER I TRIED TO CONNECT TO A SITE, A POP-UP MESSAGE APPEARED INDICATING: "UNABLE TO INITIALIZE THE APPLICATION'S SECURITY COMPONENT. THE MOST LIKELY CAUSE IS PROBLEMS WITH FILES IN YOUR APPLICATION'S PROFILE DIRECTORY. CHECK THAT THIS DIRECTORY HAS NO READ/WRITE RESTRICTIONS." I EVEN REMOVED FIREFOX FROM MY COMPUTER AND DOWNLOADED IT AGAIN, FIGURING THAT BY NOT MERELY USING AN UPGRADE, I WOULD BE INSTALLING A COMPLETELY FRESH DOWNLOAD. UNFORTUNATELY, I RECEIVED THE SAME DISAPPOINTING RESULT, WITH THE SAME POP-UP MESSAGE RE-APPEARING. HOWEVER USING BOTH GOOGLE CHROME AND INTERNET EXPLORER, I WAS ABLE TO CONNECT TO WEBSITES. SO I HAVE TO CONCLUDE THAT THE PROBLEM IS NOT WITH MY INTERNET CONNECTION.

Press '''START + R''' in keyboard to open the '''Run''' box(or '''start''' then '''run''') , type in the RUN box '''%APPDATA%''' (or copied in just i wrote, bold text) then click '''OK'''. A Windows Explorer window will appear, in this window, choose '''Mozilla''' then '''Firefox''' then '''Profiles'''. Each folder in the "Profiles" folder (e.g., "xxxxxxxx.default") is a profile on your computer (maybe is one file if you have only one profile).
see for more info : [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile folder - Firefox ]
try it, good luck
thanks again

Recovering from a network drive

Hey all
I've been successfully using Time machine on a network drive (using "defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1"  in a console). Unfortunately, my HDD broke and apple support had to install a new one.
Now, how do I restore from that network drive again? I have a freshly installed and fully updated Leopard already and would like to just restore the users' settings. But, the network drive isn't visible in the migration assistant.
I even tried to copy the network drive's content to a firewire disc... still nothin visible.
What else can I do?
Thanks a million!!!
Bernhard

Yes, I can mount the image and thus have access to all revisions stored by time machine. Maybe I could use rsync to get the data back in place? My hope was to make time machine recognize the image on the (now) local drive and recover from there... is that possible?
I know that it's unsupported to use time machine on a nas, but - for me - running time machine on a local hdd just doesn't make much sense (I want multiple computers to do their backup to the same drive and I also want to separate the backup drive from the original drives physically). I also don't see why this should be so difficult to implement (Vista can do it btw... :-)), unless, of course, Apple wants to sell its time capsules...
Anyway, I didn't want to complain, I would just like to get my data back.
Thanks for your help!
Bernhard

Following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?

following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?
Also mail not loading. The error report suggests that I look for updates from the app store?

http://www.apple.com/support/mac/app-store/contact/

CCM 8.6.1- Installation Failed. Restart install to recover from failure

Hi All,
I am installing CCM 8.6.1 on an MCS7835I3 platform. The platform came with CCM 8.6.1 preloaded on the harddrive. During the installation linux detected some compenents like NIC, Raid, and USB.
then after checking some components i face below error
"The installtion has failed and must be restarted to recover from the faliure.
You may dump diagnostic information at this time to a USB storage key. Would you like to dump diagnostic information"
I am try to figure out what is causing this message.
Pls help me!!

Hi
It seems to me that your server did not begin the CUCM installation. If you already have pre-loaded CUCM media in the server hard disk then you should first check the boot sequence on the server. Make sure that the first option is the hard disk.
Once confirmed, restart the server.
If you still face the issue, then i suggest that you install CUCM from CD.
Below is the installation document. Do check the server compatibility and hardware requirements.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_6_1/install/cmins861.html
Regards ,
- Jayant

Mac Pro display does not recover from sleep

Hello,
I have a Mac Pro Mid 2010 with two graphics cards (ATI 5770 & nVidia Geoforce GT 120) and three displays. After intense use of the GPUs with graphics processing jobs, and after the screen goers to sleep, they do not recover. The computer is accessible via the network (ping, ssh, etc) however, the screens blank out and no longer recover from sleep. The only resolution is to reboot.
I have already run memtest all just to make sure there isn't a memory issue. All tests passed. Also, this issue has ocurred with Mountain Lion and Mavericks.
Does anyone have any suggestions or experiences with regard to this iussue?
Thanks

Update -- I now can reproduce the issue at will and it is definitely related to the sleep feature and has gotten much worse under OS X Mavericks. Side Rant -- First let me note how disappointing Mavericks is as a platform. Apple's output seems to be getting progressively less thought out, reliable and buggy.
Now back to the issue. I created a hot corner that puts my display to sleep. Every time I active the hot corner the system display is lost -- that is the system continues to function and respond via network (ping, ssh, etc) but no joy on un-sleeping the displays.
I have Mac Pro Mid 2010 w/ 2x 2.4Ghz Quad Core, 32GB RAM, ATI 5770 and NVidia Geoforce GT 120 using three displays (2x 27" Apple and 1x Panasonic 1080P HD TV) running OS X 10.9.1 (13B42).

Itunes 7 + Win XP Pro (Recover from a serious error0

Everytime i turn on my PC I get this window telling me that windows has recovered from a serious error. The last blue screen I got was almost a week ago. I have done system retore to pre iTunes 7 and i continue to get this error. iTunes 7 is the only recent change to my computer(which is almost 5 yrs old) Is it my computer, Windows, or iTunes??

i wish I had time to do that except by the time i reformat, and restore all my files that will kill a whole afternoon. I plan on buying an imac when leopard comes out, considering that itunes , office and IE are all i use this computer for hopefully it can survive til spring (knock on wood) Thanks

MBP not recovering from sleep / Strange 'freezing' crashing...

I'm having a VERY strange issue here.
Over the past week, my MBP (only 4 months old?) has become suddenly unable to recover from sleep. I'll be watching a movie in FrontRow, 'sleep' it from my Apple remote, and then when it re-awakens, the screen fires up but it's black (as in, the backlight is obviously on and drive/fan spins up, but no image on display).
Then, just tonight, I've been working on some websites, nothing too intensive, maybe running iTunes and Safari in the background alongside 'DreamWeaver', and the whole system just FROZE. I can't type, I can't move the cursor, the screen is completely frozen. I kept waiting for the familiar 'kernel panic' screen to appear or something, but I've never seen any Apple machine do this before...
It's kinda worrying as I'm not particularly stressing the machine or anything.... any ideas??

Try setting your SMC controller - especially if its a wake and sleep related issue.
http://support.apple.com/kb/HT3964
Likewise in Utilities, open 'Console' to look at your logs. There will be diagnostic messages (I hope) about the crash.
You could also run the activity monitor to make sure processes aren't topping out and hogging the CPU.

Is there any file carver technology tool to recover from a HDD only a group of named jpg files

Is there any file carver technology tool to recover from a HDD only a group of named jpg files that i lost? I lost 500 jpg files in my iPhoto library named i.e from 1.jpg to 500.jpg and I want to recover ONLY them from an 1TB external WD My Book e-sata disk, to avoid time waste and unwanted jpg files.
I' ve used data recovery software as Photorec, but it recovers all the jpgs it can find, it can't search for specific name files and as it uses its own naming for the files it recovers, i have thousands of photos to look up and find these i really want.Not to mention so much waiting time.
Even if you know other technology tool that can help me please tell me.
I've also used StellarPhoenixMacDataRecovery that is not file carving tool, but with similar results.

Prosoft Data Rescue may be what you need. Others may work that way, that are described here:
My data has become inaccessible, and I don't have a backup!

Recovering from an interupted stream

Similar Messages

Maybe you are looking for