Recovering from interrupted patch

I have a slight problem which stems from our patch bundle taking a long time per patch at some points (thus tripping the timeout on our console terminal server) and the resulting lack of feedback.
Thinking the patch process had hung, I halted and rebooted the server so as not to run over my maintenance window. Yes, that was stupid of me to do, but that is water over the dam.
As it turns out, the patch it was trying to apply when halted is in a half-applied state. Is there any way of recovering short of a full re-install of Solaris?

I already tried re-applying the patch bundle from single-user state, and the bundle script skipped over the partially-applied patch.
A quick perusal of the man page for patchrm suggests that attempting to remove the partially applied patch first will result in an error message, so I suppose I needn't bother with patchrm. I'll try re-applying just the interrupted patch from single-user and see how that works.
Thanks for the advice.

Similar Messages

  • "appleyukon2....sk980sx_dnet...recovering from missed interrupt"

    Hey guys,
    I've been having sleep issues with my macbook pro and i'm just trying to figure what the issue is.. i just did a clean install and pretty much left out all the 3rd party apps...
    it's been running solid for a few hours now.. no sleep or boot issues so far... 100% updated but i was looking through the console logs and i keep seeing
    "appleyukon2....sk980sx_dnet...recovering from missed interrupt"
    is this bad?
    any advice would be appreciated... i'm just trying to identify if the issue is hardware or software on my macbook pro

    Hi,
    I hve been plauged by these sleep issues for the past few months. Mainly after i upgraded to 10.5.2
    When i have my power connected and i close the lid of my computer i get no display and the display just keeps sleeping. I have to do a Hard Reboot (I hate doing those in a MAC)
    After doing a Hard reboot my Console (System.log) says this
    _+AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt+_
    It also has entries like the one below which is scaring me as the disk it is refering to is my HDD
    _+May 31 09:07:57 GaneshRaja kernel[0]: disk1s2: media is not present.+_
    _+May 31 09:07:57 GaneshRaja kernel[0]:+_
    Appreciate any pointers that can be given for this. Thanks a Ton.
    - G

  • Recovering from a partial RT Image

    We use the RT Replication VI to setup our RT controllers.  Recently we
    had the imaging process get interrupted due to a network failure. 
    After the failure we could no longer see the RT controller in MAX.  In
    order to get it back up and running, we had to format the CF card (we
    are using the 8145RT card).  Is there a way to recover from a partial
    install other then formating the CF card?  I was hoping that putting
    the controller in User-Defined Safe Mode would allow it to reappear in
    MAX, but it doesn't.  Any suggestions would be greatly appreciated.

    We were able to reproduce the issue.  Below is the serial output from the unit after the issues has ocurred.  The S3 switch for user-defined safe mode is enabled.
    /fGeneral Software Pentium Embedded BIOS (tm) Version 4.3
    Copyright (C) 2000 General Software, Inc.
    National Instruments PXI-8140RT
    BIOS Version 1.423;01H(C) 2000 General Software, Inc.
    Pentium-4.3-6E69-EA4E;1;:6H08;01HHit ^C if you want to run SETUP.06;01H00000016K Low Memory Passed0000006400000128000001920000025600000320000003840000044800000512000005760000064000000640
    00000000K Ext Memory Passed0000051200001024000015360000204800002560000030720000358400004096000046080000512000005632000061440000665600007168000076800000819200008704000092160000972800010240000107520001126400011776000122880001280000013312000138240001433600014848000153600001587200016384000168960001740800017920000184320001894400019456000199680002048000020992000215040002201600022528000230400002355200024064000245760002508800025600000261120002662400027136000276480002816000028672000291840002969600030208000307200003123200031744000322560003276800033280000337920003430400034816000353280003584000036352000368640003737600037888000384000003891200039424000399360004044800040960000414720004198400042496000430080004352000044032000445440004505600045568000460800004659200047104000476160004812800048640000491520004966400050176000506880005120000051712000522240005273600053248000537600005427200054784000552960005580800056320000568320005734400057856000583680005888000059392000599040006041600060928000614400006195200062464000629760006348800064000000645120006451208;01Hs                                    u08;01HWait.....
    PCI Device Table.
    Bus Dev Func VendID DevID Class              Irq
     00  00  00   8086   7100  Host Bridge       
     00  07  00   8086   7110  ISA Bridge        
     00  07  01   8086   7111  IDE Controller    
     00  07  02   8086   7112  Serial Bus         9
     00  07  03   8086   7113  PCI Bridge        
     00  08  00   104C   AC28  PCI-to-PCI Bridge 
     00  09  00   8086   1209  Ethernet           9
     01  0E  00   1093   2AB0  Unknown Device     9
     01  0F  00   1093   2B10  Unknown Device     9
    Calling ROM extension...
    Booting in safe mode...
    2J01;01H02;01H03;01H04;01H05;01H06;01H07;01H08;01H09;01H10;01H11;01H01;01Hs+u01;
    02Hs----------------------------------------------------------------------------
    --u01;80Hs+u02;01Hs|u02;80Hs|u03;01Hs|u03;80Hs|u04;01Hs|u04;80Hs|u05;01Hs|u05;80
    Hs|u06;01Hs|u06;80Hs|u07;01Hs|u07;80Hs|u08;01Hs|u08;80Hs|u09;01Hs|u09;80Hs|u10;0
    1Hs|u10;80Hs|u11;01Hs+u11;02Hs--------------------------------------------------
    ----------------------------u11;80Hs+u02;12HSystem BIOS Configuration, (C) 2000
    General Software, Inc.03;01Hs+u03;02Hs------------------------------------------
    ------------------------------------u03;80Hs+u04;41Hs|u05;41Hs|u06;41Hs|u07;41Hs
    |u08;41Hs|u09;41Hs|u10;41Hs|u03;41Hs+u11;41Hs+u04;03HSystem CPU           : 04;2
    6HPentium04;43HLow Memory           : 04;66H638KB05;03HCoprocessor          : 05
    ;26HEnabled 05;43HExtended Memory      : 05;66H63MB06;03HFloppy 0 Type        :
    06;26HNot installed06;43HSerial Ports 1-2     : 06;66H03F806;70H 06;71H02F806;75
    H 06;76H07;03HFloppy 1 Type        : 07;26HNot installed07;43HSerial Ports 3-4 
       : 07;66H07;70H 07;71H07;75H 07;76H08;03HIde 0 Type           : 08;26H308;43HP
    arallel Ports       : 08;66H037808;70H 08;71H08;75H 08;76H09;03HIde 1 Type     
         : 09;26H309;43HROM Shadowing        : 09;66HEnabled 10;03HEmbedded BIOS Dat
    e   : 10;26H12/15/0310;43HManufacturing Mode   : 10;66HDisabled12;01HIntel8255x
    Ethernet found.
    Initializing network...done.
    IP address is 1.1.1.48

  • Rollback from a patch?

    Hi.
    I am writing change request for a client and need to specify the back out plan from applying a patch.
    Usually, we simply say "restore from backup", but I am sure there must be a better tuned way to recover from an EBS patch?
    We are using 11.5.10.2 on Linux with 10.2.0.4.
    Thanking you,

    Hi user;
    Usually, we simply say "restore from backup", but I am sure there must be a better tuned way to recover from an EBS patch?As i know the best way is take back any patch from EBS is turning to valid backup. But there are some patch option for can use and recover EBS.
    Please check this link for AutoPatch modes, arguements and options
    Also i suggest you please check below for undestanding concept of autopatch ..
    Subject: Release 11i Adpatch Basics Doc ID: 181665.1
    Oracle Applications Patching FAQ [ID 174436.1]
    http://oracle-magic.blogspot.com/2006/12/incase-you-ever-need-it.html
    Re: Appying patches when Physical standby in place.
    Hope those are can be your answer which you ar looking
    Regard
    Helios

  • Can't recover from sleep sometimes: "Oh no! Something has gone wrong!"

    I'm running gdm + gnome-shell (force fallback mode) on a Thinkpad W520 with intel integrated graphics only (via bios setting, so no optimus). Once a week or so, my Laptop fails to go to sleep properly and to recover from it.
    It basically works like this, normally when I close the lid, the sleep LED blinks a couple of times, and then stays on (and you can hear the fan turn off). When sending the laptop to sleep fails, the led blinks indefinitely (like, all night, if you let it), the fan keeps running as well.
    Once you open the lid again, you are greeted with the message "ACPI: Unable to dock!" on a black screen. This happens when successfully recovering from sleep mode as well, though.
    Shortly afterwards, instead of seeing a password prompt, you see this:
    http://wocares.com/host/images/516726_sleeperr1.jpg
    I tried to search the problem but couldn't find anything that was quite like my problem. I did however find someone saying the ~/.xsession-errors file could contain clues. So here is that:
    /etc/gdm/Xsession: Beginning session setup...
    localuser:esl being added to access control list
    /etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
    GNOME_KEYRING_CONTROL=/home/esl/.cache/keyring-JAbzae
    GNOME_KEYRING_CONTROL=/home/esl/.cache/keyring-JAbzae
    SSH_AUTH_SOCK=/home/esl/.cache/keyring-JAbzae/ssh
    GNOME_KEYRING_CONTROL=/home/esl/.cache/keyring-JAbzae
    SSH_AUTH_SOCK=/home/esl/.cache/keyring-JAbzae/ssh
    GNOME_KEYRING_CONTROL=/home/esl/.cache/keyring-JAbzae
    SSH_AUTH_SOCK=/home/esl/.cache/keyring-JAbzae/ssh
    GPG_AGENT_INFO=/home/esl/.cache/keyring-JAbzae/gpg:0:1
    (gnome-panel:1563): Gtk-CRITICAL **: gtk_accelerator_parse_with_keycode: assertion `accelerator != NULL' failed
    ** (gnome-panel:1563): WARNING **: Unable to parse mouse modifier '(null)'
    Failed to play sound: File or data not found
    Initializing tracker-store...
    Tracker-Message: Setting up monitor for changes to config file:'/home/esl/.config/tracker/tracker-store.cfg'
    ** (nm-applet:1585): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unknown return code 1
    ** Message: applet now removed from the notification area
    ** (nm-applet:1585): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.
    ** (nm-applet:1585): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
    ** (process:1578): WARNING **: Trying to register gtype 'GMountMountFlags' as enum when in fact it is of type 'GFlags'
    ** Message: Starting applet secret agent because GNOME Shell disappeared
    ** (nm-applet:1585): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
    ** (process:1578): WARNING **: Trying to register gtype 'GDriveStartFlags' as enum when in fact it is of type 'GFlags'
    ** (process:1578): WARNING **: Trying to register gtype 'GSocketMsgFlags' as enum when in fact it is of type 'GFlags'
    Tracker-Message: Setting up monitor for changes to config file:'/home/esl/.config/tracker/tracker-store.cfg'
    ** Message: applet now embedded in the notification area
    (gnome-settings-daemon:1515): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -8 and height 27
    (nm-applet:1585): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -23 and height 27
    ** Message: applet now removed from the notification area
    Starting log:
    File:'/home/esl/.local/share/tracker/tracker-store.log'
    (notification-daemon:1608): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -23 and height 27
    Any help or pointers in the right direction would be appreciated.

    I'm having the same problem as you on a T420 (without optimus), see here: https://bbs.archlinux.org/viewtopic.php?pid=1131177

  • Blue screen error "windows has recovered from a unexpected shutdown"

    Hi guys
    I am using laptop & everyday it will unexpectedly shutdown and shows Blue screen error "windows has recovered from a unexpected shutdown"...Pls help me to resolve this issue.
    Problem signature:
      Problem Event Name: BlueScreen
      OS Version: 6.1.7600.2.0.0.256.48
      Locale ID: 1033
    Additional information about the problem:
      BCCode: d1
      BCP1: 00000030
      BCP2: 00000002
      BCP3: 00000000
      BCP4: 8F2DA8A5
      OS Version: 6_1_7600
      Service Pack: 0_0
      Product: 256_1
    Files that help describe the problem:
      C:\Windows\Minidump\062614-23836-01.dmp
      C:\Users\Venkateshwara swamy\AppData\Local\Temp\WER-74552-0.sysdata.xml
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    It could be some driver compatibility issues.
    http://msdn.microsoft.com/en-us/library/windows/hardware/ff560244(v=vs.85).aspx
     http://blogs.technet.com/b/askcore/archive/2008/11/01/how-to-debug-kernel-mode-blue-screen-crashes-for-beginners.aspx
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • I AM UNABLE TO CONNECT TO ANY WEBSITE USING FIREFOX. EVEN THOUGH, I HAVE BEEN USING FIREFOX ON THE SAME COMPUTER FOR YEARS WITH NO DIFFICULTY. THE PROBLEM AROSE AFTER COMCAST, MY ISP, RECOVERED FROM A WIDESPREAD OUTAGE THAT LASTED 5 HOURS.

    I SUCCEEDED IN TRANSFERING ALL MY BOOKMARKS TO GOOGLE CHROME. THIS WILL ALLOW ME ACCESS TO WEBSITES WHILE I WAIT FOR A METHOD TO REPAIR MY FIREFOX PROGRAM. IN A PREVIOUS MESSAGE, I EXPLAINED THAT I WAS UNABLE TO ACCESS ANY WEBSITE USING FIREFOX AFTER COMCAST, MY ISP, RECOVERED FROM AN OUTAGE THAT LASTED 5 HOURS. WHENEVER I TRIED TO CONNECT TO A SITE, A POP-UP MESSAGE APPEARED INDICATING: "UNABLE TO INITIALIZE THE APPLICATION'S SECURITY COMPONENT. THE MOST LIKELY CAUSE IS PROBLEMS WITH FILES IN YOUR APPLICATION'S PROFILE DIRECTORY. CHECK THAT THIS DIRECTORY HAS NO READ/WRITE RESTRICTIONS." I EVEN REMOVED FIREFOX FROM MY COMPUTER AND DOWNLOADED IT AGAIN, FIGURING THAT BY NOT MERELY USING AN UPGRADE, I WOULD BE INSTALLING A COMPLETELY FRESH DOWNLOAD. UNFORTUNATELY, I RECEIVED THE SAME DISAPPOINTING RESULT, WITH THE SAME POP-UP MESSAGE RE-APPEARING. HOWEVER USING BOTH GOOGLE CHROME AND INTERNET EXPLORER, I WAS ABLE TO CONNECT TO WEBSITES. SO I HAVE TO CONCLUDE THAT THE PROBLEM IS NOT WITH MY INTERNET CONNECTION.

    Press '''START + R''' in keyboard to open the '''Run''' box(or '''start''' then '''run''') , type in the RUN box '''%APPDATA%''' (or copied in just i wrote, bold text) then click '''OK'''. A Windows Explorer window will appear, in this window, choose '''Mozilla''' then '''Firefox''' then '''Profiles'''. Each folder in the "Profiles" folder (e.g., "xxxxxxxx.default") is a profile on your computer (maybe is one file if you have only one profile).
    see for more info : [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile folder - Firefox ]
    try it, good luck
    thanks again

  • Recovering from a network drive

    Hey all
    I've been successfully using Time machine on a network drive (using "defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1"
 in a console). Unfortunately, my HDD broke and apple support had to install a new one.
    Now, how do I restore from that network drive again? I have a freshly installed and fully updated Leopard already and would like to just restore the users' settings. But, the network drive isn't visible in the migration assistant.
    I even tried to copy the network drive's content to a firewire disc... still nothin visible.
    What else can I do?
    Thanks a million!!!
    Bernhard

    Yes, I can mount the image and thus have access to all revisions stored by time machine. Maybe I could use rsync to get the data back in place? My hope was to make time machine recognize the image on the (now) local drive and recover from there... is that possible?
    I know that it's unsupported to use time machine on a nas, but - for me - running time machine on a local hdd just doesn't make much sense (I want multiple computers to do their backup to the same drive and I also want to separate the backup drive from the original drives physically). I also don't see why this should be so difficult to implement (Vista can do it btw... :-)), unless, of course, Apple wants to sell its time capsules...
    Anyway, I didn't want to complain, I would just like to get my data back.
    Thanks for your help!
    Bernhard

  • Following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?

    following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?
    Also mail not loading. The error report suggests that I look for updates from the app store?

    http://www.apple.com/support/mac/app-store/contact/

  • CCM 8.6.1- Installation Failed. Restart install to recover from failure

    Hi All,
    I am installing CCM 8.6.1 on an MCS7835I3 platform. The platform came with CCM 8.6.1 preloaded on the harddrive. During the installation linux detected some compenents like NIC, Raid, and USB.
    then after checking some components i face below error
    "The installtion has failed and must be restarted to recover from the faliure.
    You may dump diagnostic information at this time to a USB storage key. Would you like to dump diagnostic information"
    I am try to figure out what is causing this message.
    Pls help me!!

    Hi
    It seems to me that your server did not begin the CUCM installation. If you already have pre-loaded CUCM media in the server hard disk then you should first check the boot sequence on the server. Make sure that the first option is the hard disk.
    Once confirmed, restart the server.
    If you still face the issue, then i suggest that you install CUCM from CD.
    Below is the installation document. Do check the server compatibility and hardware requirements.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_6_1/install/cmins861.html
    Regards ,
    - Jayant

  • Mac Pro display does not recover from sleep

    Hello,
    I have a Mac Pro Mid 2010 with two graphics cards (ATI 5770 & nVidia Geoforce GT 120) and three displays.  After intense use of the GPUs with graphics processing jobs, and after the screen goers to sleep, they do not recover.  The computer is accessible via the network (ping, ssh, etc) however, the screens blank out and no longer recover from sleep.  The only resolution is to reboot.
    I have already run memtest all just to make sure there isn't a memory issue.  All tests passed.  Also, this issue has ocurred with Mountain Lion and Mavericks.
    Does anyone have any suggestions or experiences with regard to this iussue?
    Thanks

    Update -- I now can reproduce the issue at will and it is definitely related to the sleep feature and has gotten much worse under OS X Mavericks.  Side Rant -- First let me note how disappointing Mavericks is as a platform.  Apple's output seems to be getting progressively less thought out, reliable and buggy. 
    Now back to the issue.  I created a hot corner that puts my display to sleep.  Every time I active the hot corner the system display is lost -- that is the system continues to function and respond via network (ping, ssh, etc) but no joy on un-sleeping the displays. 
    I have Mac Pro Mid 2010 w/ 2x 2.4Ghz Quad Core, 32GB RAM, ATI 5770 and NVidia Geoforce GT 120 using three displays (2x 27" Apple and 1x Panasonic 1080P HD TV) running OS X 10.9.1 (13B42).

  • Itunes 7 + Win XP Pro (Recover from a serious error0

    Everytime i turn on my PC I get this window telling me that windows has recovered from a serious error. The last blue screen I got was almost a week ago. I have done system retore to pre iTunes 7 and i continue to get this error. iTunes 7 is the only recent change to my computer(which is almost 5 yrs old) Is it my computer, Windows, or iTunes??

    i wish I had time to do that except by the time i reformat, and restore all my files that will kill a whole afternoon. I plan on buying an imac when leopard comes out, considering that itunes , office and IE are all i use this computer for hopefully it can survive til spring (knock on wood) Thanks

  • MBP not recovering from sleep / Strange 'freezing' crashing...

    I'm having a VERY strange issue here.
    Over the past week, my MBP (only 4 months old?) has become suddenly unable to recover from sleep. I'll be watching a movie in FrontRow, 'sleep' it from my Apple remote, and then when it re-awakens, the screen fires up but it's black (as in, the backlight is obviously on and drive/fan spins up, but no image on display).
    Then, just tonight, I've been working on some websites, nothing too intensive, maybe running iTunes and Safari in the background alongside 'DreamWeaver', and the whole system just FROZE. I can't type, I can't move the cursor, the screen is completely frozen. I kept waiting for the familiar 'kernel panic' screen to appear or something, but I've never seen any Apple machine do this before...
    It's kinda worrying as I'm not particularly stressing the machine or anything.... any ideas??

    Try setting your SMC controller - especially if its a wake and sleep related issue.
    http://support.apple.com/kb/HT3964
    Likewise in Utilities, open 'Console' to look at your logs. There will be diagnostic messages (I hope) about the crash.
    You could also run the activity monitor to make sure processes aren't topping out and hogging the CPU.

  • Is there any file carver technology tool to recover from a HDD only a group of named jpg files

    Is there any file carver technology tool to recover from a HDD only a group of named jpg files that i lost? I lost 500 jpg files in my iPhoto library named i.e from 1.jpg to 500.jpg and I want to recover ONLY them from an 1TB external WD My Book e-sata disk, to avoid time waste and unwanted jpg files.
    I' ve used data recovery software as Photorec, but it recovers all the jpgs it can find, it can't search for specific name files and as it uses its own naming for the files it recovers, i have thousands of photos to look up and find these i really want.Not to mention so much waiting time.
    Even if you know other technology tool that can help me please tell me.
    I've also used StellarPhoenixMacDataRecovery that is not file carving tool, but with similar results.

    Prosoft Data Rescue may be what you need.  Others may work that way, that are described here:
    My data has become inaccessible, and I don't have a backup!

  • Why do I get "The system has recovered from a serious error" after system shut down

    Every time when start/restarting the computer using the attached .vi I get a window with "The system has recovered from a serious error." Although this does not seems to have any effect on application and I am able to use the test equipment but could someone explain why this is happening?
    LV 8.2
    TestStand 3.5
    MAX 4.1
    NI DAQ Card PXI-4461
    Many Thanks
    Mehran
    Mehran Fard
    Attachments:
    System Shutdown.doc ‏63 KB

    Hi Fardm,
    how should we answer that question when you don't attach the VI, but only a picture hidden in some proprietary file format?
    Attach the VI!
    You also have some Rube-Goldberg in your code:
    IF not zero THEN use ErrorCode ELSE use zero
    Why not just connect errorcode directly with BundleByName? You don't need the Select function here...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

Maybe you are looking for