Recovering Music After Wiping The Hard-Drive

I just recently had to do a full system restore on my comp. All the songs I had bought from itunes was deleted in the process. I can access my purchase history though itunes and was wondering if there was anyway to get them back.

This is why it is basic to maintain a backup.
Use your backup to put them back on.
If for some reason you have failed to maintain a backup (terrible idea), then you can transfer itunes purchases from an ipod:
File>Transfer Purchases
"PRODUCTS CAN ONLY BE DOWNLOADED ONCE; AFTER BEING DOWNLOADED, THEY CANNOT BE REPLACED IF LOST FOR ANY REASON. YOU SHALL BE RESPONSIBLE FOR BACKING UP YOUR OWN SYSTEM"
http://www.apple.com/legal/itunes/us/terms.html

Similar Messages

  • Re installing after wiping the hard drive

    I had to wipe my hard drive and have just reinstalled. But how do I get my After Effects and premier pro to start working again. I can't seem to open my last projects.
    The tech at the Mac store (I have a MacBook pro) did say something about reinstalling my Creative Cloud. How do you do this?

    The same way you did the first time
    http://www.adobe.com/products/creativecloud/faq.html
    http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
    What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
    Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  • My eMac won't update to 10.5.8 from 10.3.5 after I wiped the hard drive clean

    I was wiping the hard drive of my eMac that at the time HAD a good running copy of OS X 10.5.8 on it. Now obviously I did not want to reinstall from a back up because I'm donating the eMac to a non-profit and wanted no data from me, the previous owner, on it..
    I do have the original discs, but they only install OS X 10.3.5 on the eMac. When I tried to update the OS to 10.5.8, where I had it running before wiping, I got a message that the "Bill of materials was not included for this package" (or something to that effect), so the eMac would not allow me to update the OS with the newly downloaded software.
    Now what?

    Thank you both so very much! I have found my Leopard DVD and am installing it as I write this on a different computer. The missing link, no doubt. I presume that after I install the 10.5 Leopard, I can then add the update that sits on my desktop now?
    Again, thank you so much.

  • Wiping the hard drive

    Hi
    After windows failed and recovery discs did not work, failed on the second disc. If i wiped the hard drive using active killdisc and then used recovery discs (made at time of purchace) what are the chances of if working or do we buy HP recovery discs.
    Dv7-1050ea
    Windows Vista 32 bit
    nothing changed and working ok before windows failed 
    This question was solved.
    View Solution.

    Hi,
    If your recovery Discs don't work at the moment, there are no downsides as such, it literally just writes zeros to the entire HDD and this can resolve problems with Recovery Discs not working on drives that have been partially wiped - as I mentioned before, it's important to select the (80h) option, then press f10 to wipe all existing partitions before trying your recovery discs again.
    There is a similar thread to yours that you may want to read Here.
    If you want to try this, you can download and install Killdisk on the link below.
    http://software.lsoft.net/KillDiskSuiteFree-Setup.​exe
    Go to the Kill Disk application you have installed in All Programs, open the main folder, then select Bootable Disk creators and from that select Bootable DOS CD Creator which will burn the bootable ISO to a blank CD.
    Do not worry about any warnings as your Recovery DVDs will reformat the HDD.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and itunes, it seems that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior..

    After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and my ipod (Classic 160gb) it would seem that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior to the original harddrive's failure for Tiger OSX 10.4.11
    Any ideas on the subject would be most helpful
    Thanks in advance
    Dingoh

    The last security update released for Tiger users was the 2009-005 update. The latest version of QuickTime is 7.6.4. The last version of iTunes that can run on Tiger is 9.2.1, because 10.0 only supports Mac OS X Leopard and later.
    So, are you on version 9.2.1?
    Was it Tiger or Leopard you had on the drive before?
    iTunes 9.2.1 download...
    http://support.apple.com/kb/DL1056

  • Can I install Mac OS X 10.5 on a Powerbook G4 already running Mac OS X 10.6? I lost my disc of 10.6 and can only find my 10.5 disc as I'm selling my MacBook and wiping the hard drive for a complete reset.

    Can I install Mac OS X 10.5 on a Powerbook G4 already running Mac OS X 10.6? I lost my disc of 10.6 and can only find my 10.5 disc as I'm selling my MacBook, and wiping the hard drive for a complete reset.

    A PowerBook G4 can't run Snow Leopard OS 10.6, however, it can run Leopard OS 10.5. But you must use a retail (black) Leopard install DVD.
    What does the selling of your MacBook have to do with installing Leopard on your PowerBook?
     Cheers, Tom

  • How do I rescue OS X Lion after reseting the hard drive ?

    After reseting the hard drive I need now to replace my old OS X Lion. I don't have a copy in any other physical way but the internet by the App store. How do I manage to get back my old version of the OS in order to put my litlle mac-mini back to work?
    Thank you in advance.

    Try reinstalling by following these instruction: http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US

  • Hello, I have to reinstall photoshop cs6 after having the hard drive of my macbook pro replaced . when i try i get a message ERROR 413 header too large.what do `

    hello
    I have to reinstall photoshop CS6 on my macbook pro after having the hard drive replaced.
    download button is taking to a message ERROR 413
    it was purchased on 2013 I installed only in this computer once.
    any ideas what should I do?

    Try downloading from this link: Download CS6 products

  • After connecting the Hard Drive to the airport extreme, where can I find the file location in Windows 7

    After connecting the Hard Drive to the airport extreme, where can I find the File Location (to access my files from my Hard drive)

    Hi,
    Try this select to check backup history:
    Select 
    r1.database_name, 
    r1.name, 
    (case r1.[type] when 'D' then 'Full database backup' when 'I' then 'Differential database' when 'L' then 'Transaction Log Backup' else r1.[type] end) as BackupType, 
    r3.physical_device_name, 
    r1.backup_start_date, 
    r1.backup_finish_date, 
    r1.backup_size, 
    r1.compressed_backup_size, 
    r2.is_compressed,
    r1.server_name, 
    r1.first_lsn, 
    r1.last_lsn 
    from msdb.dbo.backupset r1 
    inner join [msdb].[dbo].[backupmediaset] r2
    on r1.media_set_id = r2.media_set_id
    inner join [msdb].[dbo].[backupmediafamily] r3
    on r1.media_set_id = r3.media_set_id

  • I wiped the hard drive and cannot reload the applications disk...it says an error occurred.

    i wiped the hard drive and now i cannot reload the "applications" disk. it keeps telling me that an error has occured.

    It would help to give us more specific and complete information so we can better assist you.

  • My 2009 MacBook Pro keeps restarting even after I wiped the hard drive and reinstalled OSX.

    About a month ago, my laptop started to randomly turn off: I would be using either Chrome, Photoshop (the free CS2 version available from Adobe's website) or Powerpoint, and the screen would go blank. I would then have to hold the power button for a while until the little light at the front of the computer would flicker and it would restart. I brought it to the Mac Store where they tested it and said it looked fine. They suggested I erase my hard drive and reinstall OSX as a precaution.
    Fast forward a month, I have been very busy with work and hadn't been able to fix this problem. It wasn't that bad, only once every couple of days, sometimes more, sometimes less, I could work despite this problem.
    Then, I installed OSX Mavericks. The installation started in the morning, but, like an idiot, I paused it to go to work. Later on, I completed the installation, it looked fine, but then all day long my laptop would suddenly restart and go to a grey screen that said in multiple languages "Your laptop restarted because of a problem, press any button to continue the restart." A computer technician friend of mine checked it out and said it was probably due to the badly installed OSX and suggested that I erase my hard drive and reinstall OSX.
    I backed up all my files, erased the hard drive and reinstalled OSX. Everything looked fine.
    Then it happened again.
    Any ideas of why this is happening?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How to sync an iPod Touch after replacing the hard drive

    Hello,
    The hard drive on my second MacBook Pro failed, so we had a new one fitted.
    I recovered most of the data using Data Rescue, so I can grab the music files, photos, Pages files, etc.
    However I can't get the User data from the damaged drive, nor any of the software programs and serial numbers so I'm effectively starting again with just the software that comes with a 'new' Mac.
    The Apple ID on the iPod Touch is very similar to [email protected]
    When I launched iTunes for the first time on the MacBook Pro I entered that email address, but it seemed like a new account was started (?).
    I connected the iPod Touch to the MacBook Pro.
    The message I got was...
    "The iPod "Toby's iPod Touch" is synced with another itUnes library. Do you want to erase this iPod and sync with this iTunes library?"
    I clicked Cancel.
    What do I need to do to get iTunes to recognise this iPod Touch so it finds all the apps we bought for it?
    I have a funny feeling that we are logged in as [email protected] in iTunes, but this isn't the same account as the Apple ID of [email protected] on the iPod Touch. Or have I misunderstood something?
    Extra info: I think this computer was working with a User name of Chris Payne, but since it's had a new internal drive we've only set up an account called Toby Payne.
    I'd appreciate your help! Thank you!

    ""The iPod "Toby's iPod Touch" is synced with another itUnes library. Do you want to erase this iPod and sync with this iTunes library?""
    This is correct. There is no way around this. The ipod touch will sync with one and only one computer/library at a time. If you sync to another, it will indeed erase the current content and replace with the content from the new drive/library.
    You can transfer itunes purchases ( including apps) from the ipod. Without syncing: File>Transfer Purchases

  • Macbook Pro keeps freezing after replaced the hard drive

    hi there,
    recently, my macbook pro (15" 2.53 ghz, 4gb ram, 250gb hdd) hard drive crashed, having no warranty left, i went through all of the troubleshooting but nothing worked. i took it into futureshop and they tried the diagnostic and concluded that the hard drive crashed, and they told me to find a new hard drive in their store and theyll replace it for free (because it only takes a few minutes). i found a 500GB 2.5" SEAGATE hard drive in the store, and they fit it in for me. then i took it home and installed the O/S myself.
    IT WORKED GREAT!!!!! but my other hard drive was too corrupt to save any of the data, so i had to start from scratch :/
    after about a week or so, my mac gradually starting freezing up more and more, and i was worried because that was the initial problem i had.
    its been about a month and a half since the first freeze, and im sick of it! about 4 or 5 times a day, the thing would just stop everything its doing, and the mac wheel would spin for about 30 seconds or so froze,, and then go back to normal.
    whats confusing is that when im on skype and the mac freezes, i can still talk to the person from voice to voice, but EVERYTHING else just stops lik my itunes and the words im typing.
    SO PLEASE HELP ME WITH THIS ISSUE ITS KILLING ME!!!!
    i am willing to do anything or even replace my hard drive again just to fix this problem, so please your help would be greatly appreciated!
    THANKS !!!

    Hi r,
    Why not bring it back to the place you bought the HD and have them test it? If it is the HD, many places will give you a new HD if it has been under a certain time period (often 30 days), otherwise you may have to send it in to Seagate for a warranty replacement.

  • Do I need to deauthorize a computer if I have wiped the hard drive clean before I sell it?

    I am going to sell my computer. I forgot to deauthorize it in itunes. I have already wiped my hard drive clean. Do I need to still deauthorize this computer and how can it be done?

    Once the drive has been wiped, the only way to deauthorize is to Deauthorize All from any computer with iTunes installed.
    If the intent was to deauthorize the comptuer, that needed to be done prior to wiping the computer.

  • I wiped the hard drive and lost lightroom...please help before wife kills me...

    Hi folks!  First post here so go easy on the newb...
    Our computer got slammed with a virus a few days back and we had to wipe the hard drive and reinstall everything.  So we lost lightroom.  The original version we had was downloaded to begin with... so the only serial number we had was wiped with the rest of the hd. (bonehead, i know)  We do have an upgrade serial number from when we upgraded our lightroom a while back, but it is useless without the "original SN#" which we don't have.
    Is there anything we can do?
    Thanks!
    Daryl & Haley

    Time to get paranoid.  For the future, backup everything, especially serial numbers and the like.  I have a program in which I store all passwords, logins, serial numbers, etc that I need. Of course it is encrypted and it takes a password to get into it, but that is only ONE password. It is a desktop/mobile application, so it gets synced with my phone.  (We travel a lot, so I need this information when we travel).   All downloaded products and associated stuff  live on an external drive and are backed up to another external drive.  There is another copy made occasionally that lives offsite.  I put a text file in the "products" directory for each program in which I ALSO have the serial number and any additional information about installation -- like what you need to install an upgrade, etc.  I have learned to be paranoid through experiences similar to yours...
    I do admit though that the companies are getting much better about forgotten serial numbers than they used to be, so it looks like you are saved this time.
    I hope you have a copy of the database and the images?  The images are truly irreplaceable, and the database is valuable.
    Judy

Maybe you are looking for

  • IOS 7.1.2 wipe my iPad. How do I get the data back?

    IiOS 7.1.2 update caused a catastrophic error in the update.  Eventually I did get the update installed but no icons or data.  It appears all the critical data was dumped.  Can I restore this mess?  Oh apple support  online. Non existent <Email Edite

  • Custom Fields in Inbox

    We need to add a few custom fields to Search and Result views of Inbox. Some of these fields are from z tables. I'm trying to determine whether I have to use BT Search customization (z index table), or redefine the search class CL_CRM_QUERYAUI_RUN_BT

  • Random Delete tool with Scriptographer

    Hi, I am trying to refine the RandomTools created for Scriptographer so that it suits my preference, but I can't figure it out in Javascript. Not knowing a lot of Javascript don't help me either! Here is the script, simplified to conserv only the Del

  • In looking to solve a problem, a blue arrow appeared, now it is overlaying my screen.

    I was searching for what I did to make a toolbar disappear, now there is a permanent blue arrow on my screen that will not move, pointing to toolbar hide / show at the scroll down. thank you.

  • Variables not updated after repository merge

    Hello, I am using OBIEE 11.1.1.7 and i am having issue with RPD patch merge. I have updated the value in the Variable and created a patch out of it. when i am trying to merge or apply this patch other RPD , it is not updating the value in the variabl