Recovering user profiles and applications from old iMac HDD

Wanting to upgrade my 2007 24" iMac, I replaced the HDD with a SSD and did a fresh install of Mt Lion. The goal is to transfer applications and usere profiles back to the iMac from the old drive. I want to keep personal files (doc, pix, ect) on the old drive that is connect via USB in an external case. Can this be done.
I do not have a backup of the drive either. Can I do this now that it is in a box?
Thank you for your support.
Tom D.

You can use Migration Assistant to move all the stuff to the new Mac. Don't create any user accounts, just let Migration Assistant do that by itself. Just point MA to the attached drive.
I'm not sure what you mean by keeping personal files on the old drive.
They will remain there after the migration, but the documents will be copied to the new computer.
If you want to set up the Home folders to to the external, then I can't help. There is no way to use Migration assistant to set up the users, but not transfer data. It can just transfer Applications, though. Sometimes, I think it is better to reinstall those from scratch, too.
The only way I could see doing that would be to just transfer applications, set up all new accounts, then use the Users & Groups System Prefs to set the Home folder to the external. Again, I don't know how to do this properly.

Similar Messages

How do I transfer files and applications from my iMac to a macbook

I need to transfer my stuff from an iMac to a MacBook Pro, both not new. I don't have the original install discs for the iMac. Id like to be able to keep software etc on the iMac to transfer to a family member but I dont want any of my personal information to remain.
Likewise I want to put my stuff onto the MacBook and transfer their stuff to the iMac, is it doable with a firewire cable and if so are there step by step instructions for an operator with a very small understanding!
The iMac's processor is 2,4 GHz Intel Core 2 duo
Thanks.

Sounds like a question for Blackberry.
Check your manual or the Blackberry support site, or Google.

Help transfer CS6 and cc from old iMac to new iMac both under Maverick OS

I need help transferring CS6 and cc. Don't know where to look for eithr programs and HOW to achieve the full transfer.

Hi traumadoc13,
You have Photography CC installed &activated on one computer, you can also log in to www.creative.adobe.com & install it from there.
Hope it helps you.
Regards,
Rajshree

How to merge User Profile Service Applications

We have a SP 2010 farm with UPSA and some the users have edited their profile properties in that. We have planned to move the web application from SP 2010 farm to SP 2013 farm which already has a user profile service application in it.
Both the SP2010 and SP2013 farms are using same AD.
What we need after upgrading to SP 2013,
1. The edited user profile properties should be updated in the SP 2013 farm
2. SP 2013 farm should have only one UPSA.
Please help to migrate the UPSA from SP 2010 and merge with the existing 2013 UPSA.
Thanks
Ramkumar

Hi Ramkumar,
Per my knowledge, we cannot merge the two user profile service application.
If you need the custom user properties in your User profile service application in SharePoint 2013, I recommend to create a mapping to export the user properties to AD from SharePoint 2010 user profile service application and then create a mapping to import
the user properties to user profile service application in SharePoint 2013.
http://blogs.msdn.com/b/tehnoonr/archive/2010/11/22/mapping-user-profile-properties-in-sharepoint-2010-to-ldap-attributes.aspx
Or you just need to migrate the User Profile service application from SharePoint 2010 to SharePoint 2013 and use this instead of the existing User Profile service application in SharePoint 2013.
http://technet.microsoft.com/en-us/library/jj839719(v=office.15).aspx
http://technet.microsoft.com/en-us/library/jj729795(v=office.15).aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

I plan to buy iMac w/Mountain Lion How do I un-install FCE and MSoft Office 2011 from old iMac and reinstall

How do I uninstall FCE (v 4.0.1) from old iMac (OS 10.6.8 2GHz Intel Core Duo)?
Can I re-install on new iMac I plan to buy with Mountain Lion? I have install FCE CD.

Michael Griffith wrote:
I couldn't remember from my earlier experience what the software was that worked, but I found FCS Remover on my Mac in Applications, so that's what I plan to try.
That will do the job removing all the FCE related files.
Michael Griffith wrote:
And I was surprised to learn the new iMacs don't have a DVD burner which I use all the time on this iMac and my newer Macbook Pro. I suppose that's why the prices start at $1299? I will look, but does the Apple store sell DVD burners? And assuming so, do any of you have recs?
As Keith mentions Apple sells one as an optional extra.
There are others on the market as well.
My experience is to do some serious homework before buying any unit to make sure it is compatible with your specific Mac. Some users have been very disappointed.
I use an OWC (Other World Computing) bluray burner with several types of connections and it works fine.
Michael Griffith wrote:
Lastly, it has taken me about 4 years to master FCE. I am willing to go to FCP X if those here can advise me about 1)how tough is the learning curve if you're good at FCE and 2) is it a better program?
Question 1.
Totally different to FCE and you need to forget most of what you learnt there to adapt to FCP X.
Most dramas occur learning FCP X because users try to think and use FCP X the the old way.
It took me some adjusting to get into the new methods and thinking and terms used.
Advice: Read the manual and unlearn FCE. Search the FCP X forum or ask a specific question, the info there is mounting.
Question 2.
Better is a subjective term.
I have sold all my old legacy FCP stuff and moved on to FCP X.
As a broad statement it makes it easier for someone who knows little about editing and the quirks of codecs to Import and Edit a Project.
That being said the underlying complexity of the app is very powerful.
Like all apps it's not perfect, the current version is 10.0.8 and I made the shift at 10.0.7 when it had matured to the extent I was personnaly happy to make the jump.
You may find this of interest:
https://discussions.apple.com/message/20957780#20957780
Al

Import (v. 7.1.5) iPhotos from old iMac to new iMac (v. 9.2) using Migration Mgr. over fire wire. All photos ( many dups) appeared in EVENTS and PHOTOS in the new Mac – but NO ALBUMS.

Attempted to import 6.5 GB of (v. 7.1.5) iPhotos from old iMac to new iMac (v. 9.2) using Migration Mgr. over fire wire. All photos (plus many dups) appeared in EVENTS and PHOTOS in the new Mac – but NO ALBUMS. I read a previous response to a similar question -- to copy the pictures library to the new computer. How best to do that?

There's actually an option to iPhoto Library Manager that makes this all almost work flawlessly (and work well enough for me). With the exception of Photo Albums that the pictures are part of, if you select "Library > Rebuild Library..." and then select "Scavange Orphaned Photos" check box, then it will put all the Photos and Movies into the "Scavanged Photos" album. It matches the modified pictures to their originals. It preserves all the event names and photo groupings. All the meta-data I could spot check it got right (although with 44k pictures, I only checked a few). If you fail to select this option, however, it will find no pictures at all when it goes to rebuild the library (this was true of the small test libraries I tried as well as the big, monster 280GB library I just finished converting). The conversion process took 5 hours to run, but in the end produced a library my new iPhoto can read and that I can interact with. I'll be suggesting to the iPhoto Library Manager folks a notation that would estimate the number of Orphaned Photos and display that number as a hint to the user that the option would be useful.
Edited: Thanks to Old Toad and LarryHN for their help in finding which of the many options to transition this library to 9.5.1 I needed to use. Sorry if I took my frustration of the past several months out on you guys for generously trying to help me.

What is the fastest way to transfer files and applications from an older iMac to a new MacBook Pro?

What is the fastest way to transfer files and applications from an older iMac to a new MacBook Pro?
I have a Firewire cable and Thunderbolt adapter, but no icons showing either Mac appear on either desktop.

The fastest way is to use Carbon Copy Cloner and a external drive formatted GUID OS X Ext. J in Disk Utlilty, then connecting to the new Mac and using Migration Assistant in the Utilites folder.
Even faster, if you can determine your going to replace all the apps from fresh sources anyway (like if the older Mac's OS X verison is old thus the apps) then just use a external drive and copy just your files to it, then connect to the new Mac and transfer over.
Some apps you can just grab the registration code and install it fresh on the new machine with the old code, talk to the developer about transfering the program, as long as it's deleted on the older Mac in the process.
It used to be Firewire Target disk mode was fastest, but since Thunderbolt came out...
Notice this support doc hasn't been updated since june 2012, no Thunderbolt info
https://support.apple.com/kb/HT1661

Migrate to new iMac from old iMac and am getting 'incompatible software' message.

Im trying to migrate to new iMac from old iMac and am getting 'incompatible software' message. I'm not sure what to do- can I revert back to snow leopard from mavericks?

Hi Mark,
If you install Mavericks, or in your case migrate from an old computer running Snow Leopard (or an earlier version of Mac OS X) to one using Mavericks, some of your software that was designed to run on older computers may not function in the new OS. See this article -
OS X: About the incompatible software folder
http://support.apple.com/kb/HT3258
In particular -
If you see a message indicating that you can't use "this version" of an app, contact the software's vendor or visit their website to see if a later, compatible version of the app is available. If you purchased the software from the Mac App Store, use Software Update to see if an updated version is available there.
and
During installation, OS X moves known-incompatible software to a folder named "Incompatible Software" at the top level of the startup drive. If this folder is present on your Mac, see what applications are in it, then check for available updates. To obtain a newer version of an Apple app, check the Mac App Store, or visit the Apple Store website.
Regarding installing an older operating system on your new iMac, Apple does not support doing this, as described in this article -
Don't install a version of Mac OS X earlier than what came with your Mac
http://support.apple.com/kb/HT2186
Thanks for using Apple Support Communities.
Best,
Brett L

I transferred settings and files from old MacBook air to new one. New one now gives popup about failing to connect to server (old iMac). the new Mac air and old iMac have never met and are 2000 miles apart. How do I stop the popups?

I transferred settings and files from old MacBook air to new one. New one now gives popup about failing to connect to server (old iMac). the new Mac air and old iMac have never met and are 2000 miles apart. How do I stop the popups?

Change your settings in Sharing preferences, for one, and remove the server out of the Finder's sidebar. Obviously, this is the result of transfering all your other computer's preferences to your new computer.

Transfering photo library from old iMac to new iMac

I just got a new 24" iMac and want to transfer my photo library (~2000 photos) from my older iMac. Is there an easy way for me to do this which will keep all my photos still organized in albums? Or is there no way around it and I will have to reorganize them into albums again?
Any help is appreciated!
-P

Pierre C:
Welcome to the Apple Discussions. Yes, there's a very easy way. Connect the two computers together so you can copy from one to the other and then copy the iPhoto Library folder from the older iMac into the Pictures folder of the new iMac. After the copy is complete I suggest you download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field. This will make sure the ownership and access permissions are correct for the new library.
One way to connect the two is to connect them with an ethernet cable and create a mini network. Or you can connect the two together with a Firewire cable and boot the old iMac into Target Disk Mode and then do the copy with the new iMac.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Time Machine Error when upgrading from old iMac to new iMac

Hi. I recently purchased the new 27" iMac and just completed migrating all data from an old PPC iMac. When I went to activate Time Machine and begin backing up on an existing 1TB Time Capsule, I received the following Time Machine error: "The backup disk image "xxxx" iMacG5 sparsebundle" is already in use."
Does this mean I need to go into Time Capsule first and delete the old iMac's sparsebundle before activating Time Machine on the new iMac? If so, is it safe to just drag the sparsebundle file to the trash?
Thanks!

sgrubman wrote:
Hi. I recently purchased the new 27" iMac and just completed migrating all data from an old PPC iMac. When I went to activate Time Machine and begin backing up on an existing 1TB Time Capsule, I received the following Time Machine error: "The backup disk image "xxxx" iMacG5 sparsebundle" is already in use."
Does this mean I need to go into Time Capsule first and delete the old iMac's sparsebundle before activating Time Machine on the new iMac?
No, you shouldn't have to do that, but you may want to if the TC's disk isn't well over twice the size of the data you're backing-up.
Most likely, all you have to do is eject the sparse bundle via the Finder.
A new feature in Snow Leopard will allow you to continue backing-up to the same sparse bundle. See #B5 in the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.
If so, is it safe to just drag the sparsebundle file to the trash?
Yes, but if there's nothing else on the Time Capsule, this will be much faster:
Use the +*Airport Utility+* app, in your Applications/Utilities folder.
Select +*Base Station > Manual Set-Up+* from the Menubar, then Disks in the tool Bar, then Erase.

How to recover user profile PSADMIN to its original status ?

Folks,
Hello. My user ID to login into Application Designer is "PSADMIN". I just set up PIA. "http://localhost/psp/ps/?cmd=login" can get to PeopleSoft signon page, and I use "PSADMIN" to login. I can open all of web pages after login. "PSADMIN" is access profile and user profile.
But after I create a role "newUser" and assign a permission list to the Role, then link the role "newUser" to user profile "PSADMIN", I cannot open most of the web pages after login into PeopleSoft signon page using "PSADMIN". The system come up the message: " You have no access to the Navigation collection. Please contact your Portal Administrator".
Can any folks tell me how to recover user profile "PSADMIN" to its original status so that open all of web pages after login ?
Thanks.

go into PIA using a root user like VP1 or PS and delete what u added to PSADMIN.
if u have locked ur root user by any chance ... unlocked using back end.
PSOPRDEFN TABLE , unlock root user using update acctlock .
then login using that and make changes to PSADMIN. or else simply from the backend u can delete the added role from PSADMIN profile using same table.

Initiall SharePoint Server 2013 setup -- unable to manage new User Profile Service Application

During initial farm setup, creating an initial User Profile Service Application works fine. However, once it's created, I cannot 'manage' it through the Manage Service Applications page in central
admin.
I get a generic error (Sorry, something went wrong / unexpected error) with a correlation ID that doesn't seem to match any ULS log entries. (Yes, I merged logs from all machines in the farm.)
A Windows event log entry says:
A failure was reported when trying to invoke a service application: Endpoint Failure
Also frequent errors in ULS logs: (see below)
UserProfileApplicationNotAvailableException
User Profile Application      Proxy failed to retrieve partitions from User Profile Application: Micro…
SPDistributedCache DataCacheException
I did notice that the file 'ProfileService.svc does not exist in SharePoint's web services app at the URL you see in the error. (below)
I also found it interesting that the event log error shows 1 active endpoint and 3 failed endpoints. I have 2 WFEs and 2 app servers. But I'm only trying to get the user profile service app running on the application
servers. I have deleted and recreated this service app several times under various names (deleted/recreated its app pool as well) and wonder if these other failed endpoints could be orphans from previous instances...
Any thoughts on how I might successfully create this service application? I've already been Binging my head against a wall long enough that I would have been better off reinstalling the entire farm... I may still
do that.
FYI, my farm came from a slipstreamed SP1 install package, and received the July CU after several other things were already configured, including the already-failed UP service application.
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Foundation
Date:          8/8/2014 6:11:54 PM
Event ID:      8313
Task Category:
Topology
Level:         Error
Keywords:
User:          xyz\sp_farm
Computer:      spapp1.xyz.local
Description:
A failure was reported when trying to invoke a service application: EndpointFailure
Process Name: w3wp
Process ID: 4284
AppDomain Name: /LM/W3SVC/560632691/ROOT-1-130519915587486075
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:3
Affected Endpoint:
http://spapp1:32843/3f215b603e634a629875945488863f75/ProfileService.svc
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
    <EventID>8313</EventID>
    <Version>15</Version>
    <Level>2</Level>
    <Task>13</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-08T23:11:54.738080000Z" />
    <EventRecordID>14550</EventRecordID>
    <Correlation ActivityID="{02A1AC9C-1125-6026-E124-A52653003266}" />
    <Execution ProcessID="4284" ThreadID="16072" />
    <Channel>Application</Channel>
    <Computer>spapp1</Computer>
    <Security UserID="S-1-5-21-499312637-3451022336-10712144539-44056" />
</System>
<EventData>
    <Data Name="string0">EndpointFailure</Data>
    <Data Name="string1">w3wp</Data>
    <Data Name="int2">4284</Data>
    <Data Name="string3">/LM/W3SVC/560632691/ROOT-1-130519915587486075</Data>
    <Data Name="int4">2</Data>
    <Data Name="string5">urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc</Data>
    <Data Name="int6">1</Data>
    <Data Name="int7">3</Data>
    <Data Name="string8">http://spapp1:32843/3f215b603e634a629875945488863f75/ProfileService.svc</Data>
</EventData>
</Event>
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Foundation
Date:          8/8/2014 6:51:04 PM
Event ID:      8313
Task Category: Topology
Level:         Error
Keywords:
User:          VANTAGE\sp_farm
Computer:      spapp1.vantage.local
Description:
A failure was reported when trying to invoke a service application: EndpointFailure
Process Name: OWSTIMER
Process ID: 8472
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:3
Affected Endpoint:
http://spapp2:32843/3f215b603e634a629875945488863f75/ProfileService.svc
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
    <EventID>8313</EventID>
    <Version>15</Version>
    <Level>2</Level>
    <Task>13</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-08T23:51:04.938901900Z" />
    <EventRecordID>14596</EventRecordID>
    <Correlation />
    <Execution ProcessID="8472" ThreadID="17360" />
    <Channel>Application</Channel>
    <Computer>spapp1.vantage.local</Computer>
    <Security UserID="S-1-5-21-499312637-3451022336-10712144539-44056" />
</System>
<EventData>
    <Data Name="string0">EndpointFailure</Data>
    <Data Name="string1">OWSTIMER</Data>
    <Data Name="int2">8472</Data>
    <Data Name="string3">DefaultDomain</Data>
    <Data Name="int4">1</Data>
    <Data Name="string5">urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc</Data>
    <Data Name="int6">1</Data>
    <Data Name="int7">3</Data>
    <Data Name="string8">http://spapp2:32843/3f215b603e634a629875945488863f75/ProfileService.svc</Data>
</EventData>
</Event>
20:22:31.94 SharePoint Portal Server User Profiles cm6y High
User Profile Application Proxy failed to retrieve partitions from User Profile Application: Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: UserProfileApplicationNotAvailableException_Logging
:: UserProfileApplicationProxy.ApplicationProperties ProfilePropertyCache does not have 6cd1c1f0-5874-4f8e-9c0a-ed1aff342048     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs()     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext)
20:22:38.16 SharePoint Portal Server User Profiles d22b High
Failure retrieving application ID for User Profile Application Proxy 'User Profile Service Application': Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: UserProfileApplicationNotAvailableException_Logging
:: UserProfileApplicationProxy.ApplicationProperties ProfilePropertyCache does not have 6cd1c1f0-5874-4f8e-9c0a-ed1aff342048     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_AppID()
20:22:44.25 SharePoint Foundation DistributedCache ah24v High
[Forced due to logging gap, cached @ 08/08/2014 20:22:38.16, Original Level: Verbose] DistributedCacheClient TransportProperties- ChannelInitializationTimeout '{0}', ConnectionBufferSize '{1}',
MaxBufferPoolSize '{2}', MaxBufferSize '{3}', MaxOutputDelay '{4}',ReceiveTimeout '{5}'.
20:22:55.26 SharePoint Foundation DistributedCache ah24w Unexpected
Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache' - Exception 'Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0006>:There
is a temporary failure. Please retry later. (One or more specified cache servers are unavailable, which could be caused by busy network or servers. For on-premises cache clusters, also verify the following conditions. Ensure that security permission has been
granted for this client account, and check that the AppFabric Caching Service is allowed through the firewall on all cache hosts. Also the MaxBufferSize on the server must be greater than or equal to the serialized object size sent from the client.). Additional
Information : The client was trying to com...

Thanks for the suggestion. I performed the service restarts, and then an iisreset an the two web servers, and the application server that does not run the services. Finally, I ran iisreset on the application server that does run the services.
After performing those steps, I still cannot manage the user profile service application.
ULS log at the time of the attempt contains User Profile Application Proxy errors (in my original post) and am also noticing the following error:
08:15:21.17 SharePoint Foundation General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException:
This User Profile Application's connection is currently not available. The Application Pool or User Profile Service may not have been started. Please contact your administrator.     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ManageUserProfileServiceApplicationBase.OnPreRender(EventArgs e)     at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean
includeStag...

User Profile Service Application - My Site Suggestions Email Job

User Profile Service Application - My Site Suggestions Email Job is sending duplicate emails. It runs 15th of every month at 10 pm. On 15th July, it ran from 10 pm to 11 pm and sent two emails during this interval. Can anyone please let
me know what could be the possible reason behind this issue.
Thanks!

Hi Mannnn,
Did you tried flushing timerservice? please flush timer service cache, restart IIS and then check.
Let me know if you want steps on flushing sharepoint timer service.
Viral Shah http://sharepointshah.blogspot.com

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
== This happened ==
Every time Firefox opened
== After removing Firefox and Reinstalling it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

Recovering user profiles and applications from old iMac HDD

Similar Messages

Maybe you are looking for