Recovery and Applications CD not configured to work with this machine.

Satellite A215-S4757
Machine trashed due to virus and want to reset to original configuration.  Using disk 1 of 2 labeled RECOVERY AND APPLICATIONS/DRIVERS SATELLITE A210/215 SERIES WINDOWS VISTA HOME PREMIUM 32 BIT.  When the CD boots an error is displayed.  The error reads:
"This Recovery and Applications CD is not configured to work with this machine (*).
This CD is for: Satellite A215, Satellite A210
Please use the correct Recovery and Applications CD."
Can you tell me why this is not recognizing the machine correctly?  Thanks for the help.
R/Jim

Satellite A215-S4757 
You need the utility which resets the DMI string for that model. Call Toshiba tech support at 800-457-7777.
-Jerry

Similar Messages

  • Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

    Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

    If this happens on monitor 2 of 2, this problem has been solved here:
    http://support.mozilla.com/en-US/questions/794823#answer-157988
    Go to "Firefox"--> "Options" --> "Advanced"
    Then un-check "Use hardware acceleration when available"
    While not verified, I believe this problem is due to an SLI configuration where the focus is on monitor 1. (I.e acceleration is available, but only on monitor 1.)

  • I bought the external DVD player/burner for my Macbook.  I tried using it with my Dell laptop but it will not work.  Is it not configured to work with anything but apple operating systems?

    I bought the external DVD player/burner for my Macbook.  I tried using it with my Dell laptop but it will not work.  Is it not configured to work with anything but apple operating systems?

    If you purchased the Apple USB SuperDrive, it will only work with select Apple devices. It won't work, for example, on my Late 2011 model that has a SuperDrive built-in, but it will work with an Air, Retina model, new 'drive-less' iMacs, etc.
    As far as I know, though, you can only hack the drive to work with some other Apple devices, but not with Windows PCs. Which is a shame as other, less expensive DVD/CD devices will work with just about any machine.
    Sorry,
    Clinton

  • Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine

    Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine.
    installed new internal disk first with fresh 10.7.3 Lion software. Also upgrade ram to 4GB. Work great, super fast.
    BUT.... my WD 1TB firewire400 external disks no longer work with the Lion enabled machine now.
    FURTHER... I read somewhere that WD is problematic with Lion but Seagate was not... so I went and bought a new 3TB Seagate GoFlex.
    When it didnt work properly either, I patiently searched and found a software/firward upgrade and applied.
    I re-partitioned disk to extened/journaled standard, etc.
    Then assigned the particition to Time Machine. Drive turned the blue/grey color, so I thought it would work.
    But, it has now been in "preparing" mode in Time Machine for HOURS....
    What is up Apple? So dissappointed. Ive read these type of problems are notorious with Lion and I wish I never upgraded.
    Are you trying to make issues with External disks, to drive people to iCloud?  That trick ont work in me. I will not reward bad behaviour Apple.
    Please provide a fix... I wasted hours/days screwing around with this, instead of using the Mac for what its intended!

    Solved by Pondini, on another thread I opened...
    Answer:
    Sounds like either:
    A directory problem on your internal HD.  Verify your internal HD, and Repair any other volumes being backed-up per #A5 in Time Machine - Troubleshooting.
    Something in OSX may be damaged.  You've tried the "combo," so a fresh copy of OSX (that won't disturb anything else) would be worth a try (and you don't need a tech for that).  See Installing the ''combo'' update and/or Reinstalling OSX.

  • I bought the HP Envy 100 printer with my new Macbook Pro 13" and it does not seem to work with Lion.  Any suggestions?

    I bought my daughter a new MacbookPro 13" for grad school and selected the HP Envy 100 printer from the Apple Store website.  When I just tried to install the printer, it said that that the software was not compatable with Lion.  Any suggestions as to how to get it to work?

    Sorry, but the response just takes you to the HP site which is of  all possible assistance short of actual help!!
    HP (and Apple?) need to fess up and tell all the people who have HP printers when they will "just work" with their machines and OS X Lion.... because for many of us, they just don't! It isn't rocket science guys.... blithely telling us that downloading S/W updates from Apple doesn't help.... because they don't solve the problems!

  • I am having an issue making power nap work on my mid 2011 mac book air with mountain lion and it is enabled in system preferences and plugged  in in sleep mode it does not seem to work with time machine overnight

    I am having an issue in making power nap work on Mountain Lion on my mid 2011 Mac Book Air. It is enabled in system preferences but with time machine and sleeping overnight it did not seem to do hourly back up as stated or any other functions of power nap that I know of. it has been enabeled on both battery and plug in dc and I did leave it on plug in overnight.

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • AO and AI do not appear to work with the M&A Explorer. What could be wrong?

    Preliminaries... MAX v3.1.0.3201
    Board PCI-MIO-16E-1 (manufactured late 2002)
    I have a relatively unused board that a collegue lended to me. After plugging the board into my PC, the AO and AI don't currently work with the Measurement and Automation Explorer (MAX) Test Panel. Specifically, AI all read -10V (even when pulled to AIGnd) and AI all produce -0.40V, regardless of the commanded output. The device passes self test, but the device fails to perform a self-calibration (error -200545), even if all external connections are removed. Is this board defunct? Does it need to be recalibrated? A recalibration seems unlikely to have any effect given that none of the analog i/o values change with manipulation.
    As a side note, the digital output functions do work.
    Thank you for any advice.
    Steve

    Thanks for the input. I either missed the web-based self-test or assumed it was the same as the one included with MAX.
    The self calibration, as I previously mentioned, failed with the board disconnected from any cables/inputs. All my previous testing (with the MAX test panels) failed, regardless of using traditional or DAQmx control.
    After running the web-based self test, the results are below:
    Summary -- Test Results Summary
    2/8/2005, 7:18:02 AM, Device 1
    PASS: Detection -- Device Detection and Resource
    PASS: Single Pulse -- Single Shot Pulse Width Verification
    PASS: Continuous Pulse Train -- Buffered Pulse Width Verification
    ABORTED: Calibration -- Analog Input Calibration
    FAIL: ADC, PGIA -- Analog to Digital Converter and Programmable Amplifier
    PASS: Scan Clocks I -- Buffered Analog Input
    PASS: Scan Clocks II -- Sampling Frequency and Channel Count
    ABORTED: ADC Calibration -- Analog Input Calibration
    FAIL: Calibration -- Analog Input Calibration
    FAIL: Unstrobed Analog Output -- Digital to Analog Converter
    PASS: Output Clocks I -- Analog Output Buffer
    PASS: Output Clocks II -- Update Clock Frequency
    FAIL: Buffered Analog Output -- Waveform Output Verification
    PASS: Digital Lines -- Read/Write Verification
    PASS: Digital Ports -- Read/Write Verification
    Device 1 did not pass all tests.
    National Instruments E Series Device Diagnostics is complete.
    Submitting Test Results To National Instruments: Please Wait. . .
    Submitting Test Results To National Instruments: FAIL
    I'd post the rest, but it's just message after message of tests failing.
    The device won't self calibrate, so I had to abort after a few retries.
    It's interesting that the web-based self test is so much more advanced than the MAX self-test, which the board passed. I assume that NI doesn't have a replace-for-free program, so I'll have to return this to my collegue (with the bad news), and find one on ebay or the like.
    Steve

  • My apple i.d is connected to an email account using pop server. iCloud does not seem to work with this. When I connect to i cloud there is no mail. How do I correct this since I can't change my apple i d

    When I purchased my computer I installed  office for mac so I susally used outlook with no problems. My original apple id is the same as my pop server based e-mail account.  I had an old me.com account but never used it. When I set up i cloud on my macbook I could not get my email to download to the cloud. My calendars, contacts and everything else works. At one of the Mac stores a salesman told  me I needed to re  route my e-mail to a Google Account, which I did but still no icloud mail. I now have my original pop mail account , the google account ,i cloud and I still can't get i cloud to work with my office for mac outlook.  HELP I want one account that uses the cloud How do I make this happen?

    Your pop account won't work with iCloud, it's the alternate me address you get when you create an iCloud account that works with iCloud. Outlook won't work with iCloud either, you need to use Address Book, iCal etc etc.

  • My iPhone cable gave me a warning this morning that it was  not certified to work with this phone, but it is the cable that came with the phone and that i have been using for a year and a half.  Why?

    i plugged in my 18 month old iPhone to charge it, using the cable that came with it and that I have used regularly all along. I got a warning on my phone screen saying the cable is not certified and may not work properly with my iPhone.  Why?

    If you updated iPhone to iOS7, it now checks for real Apple Lightning Cable. Your cable may not be Apple, or someone swapped another cable with yours. Make sure the cable end is clean, take a clean dry toothbrush and carefully clean charging port on the iPhone.

  • I am using PageRage for my facebook theams and firfox does not want to work with it, it has in the past. And I cheack other browsers and it still works for them so I dont know if it is on your end or PageRage's.

    The app that PageRage uses "Yontoo Layers(TM) Runetime" so nay Help or info would be appreciated.

    Hi tekaryace, we can assist you, no problem! Do you know which version of Firefox you currently have? Did you recently upgrade to version 8? We suggest going within your browsers app settings to make sure that "Yontoo Layers" is enabled for PageRage. To get there, follow these steps: Open up your Firefox browser, click on the orange "Firefox" tab in the left hand corner > click add-ons > make sure that "Yontoo 1.20.00" is listed and enabled. If it is not, please let us know so that we can take this conversation offline to better assist you. Thank you for your patience!

  • Hi guys, need your help with iCloud notes on Mac 10.7.5; I've found this feature's more useful comparing with stickers, however can't pin notes to desktop or dock, "double click"on the note doesn't work with this version of software.

    Hi guys! Need you help with iCloud Notes on Mac Pro 10.7.5. I've found this apllication more useful comparing with "stickers", however can't pin it to desktop or dock. Thanks a lot in advance!

    Hi guys! Need you help with iCloud Notes on Mac Pro 10.7.5. I've found this apllication more useful comparing with "stickers", however can't pin it to desktop or dock. Thanks a lot in advance!

  • Crawl issue - warning: "This URL is part of a host header SharePoint deployment and the search application is not configured to crawl individual host header sites. This will be crawled as a part of ....a start address"

    Hello all,
    I have a multi-tenant environment in SharePoint 2010 server. Different tenants are hosted by one web app.
    One content source has been created to crawl the all shared environment. (the only URL added in the content source settings = URL of the
     web app)
    Crawl everything under the hostname for each start address has been selected when creating this content source.
    Now I have created a new tenant hosted by the same web app. For this new tenant I want to have a different crawl schedule. Simple , I just create a new content source and add the host URL of this tenant. With the same settings has the other content source.
    After having started a full crawl I get 0 success and 1 warning : “This URL is part of a host header SharePoint deployment and the search application is not configured to crawl
    individual host header sites. This will be crawled as a part of the host header Web application if configured as a start address.”
    The first content source is well crawling the new tenant freshly created. Could you tell me where I’m wrong?
    Thanks in advance
    Regards
    Baldo

    Baldo,
    In the configuration that you described you now have 2 content sources set to crawl the same content. If you have a content source with a start address of http://servername/ then it is going to crawl everything past that address. If you are now changing
    the crawl schedule based on the individual site collections, you will need to move your start addresses further down the URL.
    For Example:
    1st Content Source:
    http://servername/ as a start address would now become
    http://servername/site1
    http://servername/site2
    2nd Content Source:
    http://servername/site3
    Also remember that all crawling must happen on the default zone. If you are trying to crawl a zone that the web application has been extended into, that will not work.
    ScottC - Microsoft SharePoint Support

  • Is it possible to configure Time Capsule to work with Time Machine (MBP) and Genie Timeline (PC)

    I have an Apple Time Capsule (2TB) and I need to configure it to work with my MBP and Time Machine and also back up my a PC with Genie Timeline Pro 2013 (or any other suggested PC back up software).
    Setting it up to work with Time Machine is simple enough but the PC access is proving to be difficult.
    http://www.genie9.com/support/KB/KnowledgeArticle.aspx?KBID=198
    I followed the above steps but still can't connect to the network drive.  I have reformatted the TC and will be walking through the steps again.  My concern is that the two different operating systems (Win8 and Mavericks) can't share the same destination drive.
    I have created two user accounts with drive sharing activated.  One in my name for my MBP and the other in the name of my partner for her Dell laptop.
    Should the Time Capsule be partitioned?  Can it even be partitioned?  When I use Drive Utility it can't see the TC.  The only way to connect to it seems to be via Airport Utility.
    On a seperate note the TC Router Mode is set to OFF (Bridge Mode).  I have connected it to the ADSL modem/router (WiFi Off) via the WAN port.  All seems to be well.  Am I loosing any useful functionality by doing this?
    The internet settings are set Connect Using DHCP.  I have no issues but I am not really sure what it means and if I should be using other settings.  The ADSL modem/router seems to have all the PPP0E settings.
    The WiFi on the TC has been set up with a 5Ghz and 2.4Ghz network as well as a Guest Network.  I then plan to introduce 2 Airport Express (MB321LL/A). One will be an access point for AirPlay and the other a wireless extender with AirPlay.
    There is also a Canon WiFi printer that accesses the 2.4Ghz network.  It has an Ethanet port so I am wondering if I should disable the wifi connection and cable it and if so to the TC or the DSL modem/router.

    Lion, 7.6.1 firmware and iCloud offers remote access.
    http://www.apple.com/au/support/icloud/back-to-my-mac/
    To do it without the iCloud service your issue is static public IP address.. if you have one this is simple to the point of trivial. If not it is very hard, as Apple did not put in a standard dynamic DNS service.. (ensuring you were roped into their cloud accounts). Static IP from your ISP is the best solution.. if it is possible go for it.
    Then the actual protocol for access is AFP, so the only device you can do this on is a Mac.
    Do you have the TC as the main router?
    If you want any other kind of access, or to avoid icloud use vpn.. which teamviewer is a kind of.. but buy a real vpn router, and bridge the TC.. you can then vpn into your network with full security and get windows access via smb..

  • Change and transport system not configured

    hi
    Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
    How to fix this?
    i appreciate your help in advance. Thanks
    Madhu

    Hi
    After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
    STMS is mainlly used for moving objects from one system to other system
    Regards
    kiran kumar.v

  • InApp Error on Android: This version of the application is not configured for billing

    Hi,
    My App runs on Android. Free publications can download, but when I publish a folio to sell, it appears on the Android device and it gives the message: "This version of the application is not configured for billing"
    I used the (long) app license code at the API section and pasted it into the android Public Key aria in the DPS Admin.
    Then I logged out and logged in again.
    Any Ideas what could be wrong?

    On google console check merchant account and see if all the bank and tax information settings are filled correctly.

Maybe you are looking for

  • Windows Blue Screen of Death when using PC Suite

    I bought an E63 recently and by it's very nature I need to be able to link it to my laptop for uploading/downloading data. Laptop's a Sony FE11S running XP SP3 which connects successfully with the E63 via cable or Bluetooth.  Trouble is, I need to im

  • HT1918 i have a problem with my prepaid card

    i have a problem with my prepaid card i put all the correct payment informations and have a message your payment method declined please enter valid payment information <Personal Information Edited by Host>

  • Java Web Start and Cookies

    Hello All, We have the following scenario 1) A user logs in to our website. The session information for the logged in user is maintained in the cookie. 2) The User clicks the jnlp link to invoke the applet. 3) The Java Web Start gets activiated and i

  • Export & Import internal table data across the programs

    Hi All, I have two different reports,let say ZPRO1 & ZPRO2. I want to export internal table data of ZPRO1  to  ZPRO2 and then I want to do some calculations in ZPRO2 with the imported internal table data(ZPRO1). If I use 'SUBMIT' or CALL TRANSACTION

  • Assign plant to sales line in the inter company sales process

    Dear experts. Why would assign a plant to sales line in intercompany sale process? Please  provide relevant defination with examples. Thanks in advance. Regards, KV