Recovery, and Black Point Not Working in 2.0
I imported RAW pics from my old database (converted to 2.0). Wanted to try the new exposure adjustments, mainly recovery and BP. The HUD only lets me adjust exposure and brightness, the recovery and black point are grayed out and cannot be adjusted.
Has anyone got this adjustment to work? I am using the trial version. No, I am not in the preview mode. The master is Canon RAW from 40D.
Got it. Thanks! Just figured it out too that you need to choose the v2.0 RAW conversion on the RAW Fine Tuning adjustment toggle.
Recovery and BP adjust a lot more sluggish on my MBP w/4G Ram then it does in the tutorial video. This is concerning since in have only imported about 40 pics so far.
Time will tell.
Similar Messages
-
Recovery and Black Point on JPEG images
I'm not a big fan of trying to do much editing on JPEG images aside from non-exposure/white balance type stuff. I'll crop and straighten, etc.
My question pertains to (for those in the know) applying slight Recovery and Black Point correction to images that aren't shot in RAW format. A) will applying these slight changes having any effect (hopefully a positive one) on the images? B) if not, will it indeed have a negative effect?
Thanks for your time and expertise.
MacJim,
Thanks for chiming in on a topic where I didn't expect to get many replies. All of your comments are well appreciated. I was basically asking because I was under the impression that unless your master is in RAW format, making adjustments to exposure, contrast and even recovery and black point would not do much and could even be detrimental to things such as skin tone, etc. I like to shoot in RAW for the reason of being able to have more fine control to adjustments, but for everyday shots and portraits I don't always go to RAW format since a lot of the time I have trouble getting the shot right with the manual controls. I also don't want the large RAW files for every shot that I take. Still, a lot of JPEG's need adjustments, even if just minor tweaks. The tweaks I make look fine on the screen, but I wasn't sure if they would look okay when printed out and I didn't want to spend countless hours making adjustments and spend (waste) money on prints that weren't going to come out good.
Anyway, that is the background to my thinking in making this post. Thanks again for chiming in.
Mac -
Aperture2 - Recovery and Black Point adjustments question
I purchased the Aperture2 upgrade and, I'm impressed!!!
I have a question:
In the *Adjustment Tab*:
Two features in the *Exposure area, "Recover and Black Point"*, works sometimes and other times it does not.
There must be a reason for it - I just can't figure out why this happens. One would think that it should work all the time!?
Anyone know?C and Scott, thanks so much for trying to help this old codger learn new tricks.
All the images I imported into Aperture2 are projects already completed and therefore I won't need to make adjustments to them. I was using them to test and learn the new Aperture2 features.
But, Just in case I ever need to convert a RAW image from A1x to the A2 format I'll know how to do it.
As I said before, as long as my new RAW images that I import directly into A2 have all the features available, I'm a happy camper. I won't be importing any images into A2 until after my shoot this evening, so, do you know if this is the case? -
Recovery and Black Point sliders not available
Hi, I notice that these sliders are not available for RAW files that were loaded onto Aperture 1.5. Is there something I can do so I can make use of these sliders?
Cheers,
MikeYes. Migrate the image to which you wish to apply these two adjustments to the 2.0 RAW converter. Mind that your colours may shift; possibly the best way to do this is to remove all adjustments first; this will also cause the image to be interpreted by the 2.0 RAW converter.
Cheers,
k. -
Highlight recovery and Black point sliders greyed out.
Hi
Does anyone know if there is a reason that the recovery sliders would be greyed out and non functional for my images.
I have not been able to utilise this function in version two.
NWdid you migrate your RAW files to the new RAW 2.0 convertor ???
i believe that if left at the 1.1 it will prevent you from using the new features ...
migrate is under the file menu ... and can be done project by project, image by image or the whole library at once (very freaking slow if large library) ... -
I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files, the error message is "could not be opened". The movie's file format isn't recognized. " Any help or are they corrupted?
Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files. -
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have a black MacBook from 2008 and tried downloading snow leopard 10.6. It told me I had to restart my computer. However once I restarted my MacBook my touchpad and keyboard were not working so I am unable to sign in. I have no idea what the problem is
You cannot download the upgrade to Snow Leopard.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
I'm having trouble with my iPhone 4, but on the black screen with the I tune music circle with the charger below it. I just don't get it after I plugged to the computer and it's not working :.(
The screen is telling you to connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software
BTW, this is the iPod touch forum -
My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?
There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.
-
HT201412 my device was updated and now is not working anymore, it is in recovery mode all the time
my device was updated and now is not working anymore, it is in recovery mode all the time.
what can i do???Delete the shortcut you have at the moment and then create a new one as follows:<br><br>
#Use Windows Explorer to navigate to C:\Program Files\Mozilla Firefox.<br><br>
#Right click '''firefox.exe''' and choose '''Send To''', then '''Desktop (Create shortcut)'''<br>
Bear in mind that you're using an BETA version of Firefox and you're likely to encounter similar issues in the future. -
My screen is black and keyboard is not working. USB is good. Caps lock light will not turn green like I have no power. Any suggestions
Ouch, doesn't sound good, but...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964 -
actually i bought iphone 4s in nov 2012 and now its not working properly and i lost my bill as well i want to request to get a copy of bill pls.....
You are not addressing Apple here. This is a user to user technical support forum. If you are having warranty issues with the phone, a copy of the bill is not necessary for Apple to check and evaluate the phone. If there is a manufacturer defect, they will deal with it.
What is "not working properly" on the phone. Maybe someone can help and it not be necessasry to be replaced. -
I accidentally dropped my Ipod into the lake, at the beach yesterday, but i caught it early and it wasn't too soaked... i wiped it off for the most part, and most of the buttons and the screen worked fine! i was shocked, and there were a few glitches with the camera and the slide button on the lock screen, but otherwise it was greatly intact! so i gave it a rest, put it in my purse, and picked it up fifteen minutes later, and it was working 100% normally again! when i got home a few hours later, i put it in rice for a few hours, taking it out every once and a while to check my notifications... it still seemed to be working perfectly, so i just set it down out of the rice, assuming the moisture was gone. this morning, again, everything was working normally, no glitches, UNTIL, i opened my instagram app, and the screen froze, and it seemed like it had two separate screens, and i held the Sleep button down until the screen went black... then i tried turning it back on, etc. and it still didn't work, and so i plugged it into the computer, holding down the sleep and home buttons, and itunes identified it as in recovery mode, and started updating. i tried again to press the sleep and home butttons, maybe pressing only the home button, because I heard the Siri noise, as well as the charging sound, but the screen was still black.... i checked my iTunes, and lo and behold, it had identified my iPod, and synced it to the computer, as if it were normally functioning. However, the screen is still not working, and Siri is not working either. The sounds may be the only thing that's functioning. Should i send it in?
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G, $99 for the other 4Gs, $99 for the 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price
Sometime it takes a little while for the water to damage the iPod. -
I have downloaded an app and it does not work
I downloaded two apps. They are both are the same application, on;y difference is that one is the 2.0 version and the other 3.0 version.
When I downloaded the 2.0 version I thought this was the latest version, but turns out there was another newer version. But I tried the 2.0 version first and this does not work on my mac. The application is Wondershare Data Recovery. It is not able to see any devices on my mac.
So tried the 3.0 version and again same problem, does not work, funny because after careful researching on what product to buy I decided to download the trial version and it works fine. Only thing is that I need to but the full version to successfully retrive my disappeared images from memeory card, from my camera phone.
anyway the point is, I have just wasted £95, and I would like this back, or at least the problem resolved. Any help would be appreciated.
Thanks
CThe Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Updated -
I only find the v3.0 in the UK Mac App Store (MAS). But on the developer's website I find two separate apps; Wondershare Data Recovery for Mac, which is v3.0 and Wondershare Data Recovery for iTunes, which is v2. Where did you buy Data Recovery for iTunes? I don't find it sold in either the MAS or the iTunes App Store.
Have you used the support link to the developer on the apps pane in the MAS? That is who Apple will direct you to contact.
Did you remove the trial version before downloading and installing the paid MAS version(s)?
Maybe you are looking for
-
Hey guys I am currently making a video of 1 second per day I started on January 1st till yesterday that's a long project On my ipad in the application iMovie, yesterday I tapped on that box on top right with an arrow pointing upward, then selected sa
-
Performance problem for mass transactions after upgrade from 4.7 to ECC6.0
Hi All, After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade t
-
Problem in setting the target directory in communication channel
hi... my idoc 've been send successfully from the sender system and it also reached the receiver system. i conform it by checking the inbounds in IDX5. but it is not generating the xml file in the target directory. plz help me...
-
Hi all, https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] Integration Directory: I fallowed 3 flows (
-
Error During Install using Oracle DB
Hi All, I'm trying to use an Oracle database with IDM. Our DBA used the provided script (create_waveset_tables.oracle) to set up the database, we're using the login/password that the DBA set up, I've copied the oraclejdbc.jar file to the /WEB-INF/lib